MXF exported file goes missing

Have a premiere cs5.0.1 project using the AVC-Intra 100 codec.  When I export the AVC-Intra 100 mxf file from Premiere 5.0.2 or using Media Encoder 5.0.1 they both render but do not leave an mxf file on my drive.  No errors just no file after the render completes.  Exporting 1 minute of a 90 minute project.  When I attempt to render the 90 version the export never finishes.  Either way I am not getting any result.
Please help!

Hi Hunt,
Found the problem or at least on answer to the problem.  Apparently when
Exporting an mxf file adobe creates a folder called CONTENTS which is
just like what Avid does and the panasonic camera systems do.  So I
found the CONTENTS folder with the mxf files in it.  HOWEVER, I have
tried twice today to export the entire 90 minute sequence as an mxf file
and it has failed twice.  NOT because of lack of storage.  The resulting
series of mxf files should not be larger then around 100 gigs maybe a
little more.  I am currently running the full export again to see if it
errors or stops again.  Will contact you with the results.  Please allow
me to email you the results when I finish.
Talk to you soon and thanks for your support,
Rob

Similar Messages

  • Why do I receive the exclamation point when I just change the album name? File goes missing?

    I keep all of my itunes media on an attached network hard drive.  Had no problems for months but over the past 45 days I've noticed that material has started to go missing that I know I did not delete.  I have found no malware on my system.
    I read a script to tell me all the files that had an exclamation point.  There were some TV shows (an entire season gone missing) and some CDs.
    I just did a test and imported a CD.  I then clicked "get info" and changed the name of the album.  Immediately I received the exclamation point and when I tried to find the original file it is gone.  I have no idea where the file has gone to.  I've tried searching, looking around to find it, and I can't. 
    Why is itunes having this behavior?  How is the file being deleted?  Any other thoughts or ideas of what I should do to stop this?
    I've also sent a support request to the hard drive mfg (lacie) but I'm not sure I'll get much help there.
    Thanks.

    More info:  I just ran the same test two ways.  One, I had some files on my desktop, run a script to move these files to the "automatically add to itunes" folder, the files move just fine to my external hard drive and to itunes.  The file plays just fine and the "get info" tab shows it is playing the file from the external hard drive where the file was moved to (not copied).  But, as soon as I change the artist name or the album, the file goes missing and I get the exclamation point.
    I ran the same test by putting the files on my desktop, but instead of moving the file to the "automatically add to itunes folder" I just double clicked the file to play it.  I let itunes add a copy and organize my folders.  This time, the file would have been copied (not physically moved) and I see itunes is playing the new copied version.  This time, when I try to change the artist name or album, I have no problems.
    I've never encountered this before.  Any info?  Thanks.

  • Mac Pro / System Gets "Choppy" / File Goes Missing

    Hi all,
    I recently got a Mac Pro Quad-Core ($2,499 stock model) MB871LL1/A. I am using a Microsoft Intellimouse Optical and MS Comfort Curve Keyboard 2000 that did not come with the system itself that has never given me problems before.
    For the first few nights, everything seemed fine with the included iLife apps (such as iMovie, iDVD, etc)
    I later received the Final Cut Studio 3 Upgrade last night, so I installed and started experimenting with applications. Namely. FCP and Motion. Earlier projects were updated and saved and rendered speedy and normal.
    Two things happened while rendering a NEW project with either Motion 4 itself as well as Compressor 3.5:
    ISSUES:
    1. Mouse movement became extremely erratic, and the cursor would jump across the screen instantaneously. I couldn't control the mouse at all. Every movement would cause the cursor to jump around erratically. It felt like someone may have been sabotaging the mouse movement! I turned Bluetooth off as well as disconnected my LAN cable just to be sure. Still happening.
    2. System 'responsiveness' became very choppy, and in some cases would remain that way after closing the apps (though not always).
    3. I rebooted my system and reloaded my project. The project used just one font (Garamond). Motion reported that the font was missing - I checked with Font Book as well as the /Fonts directory itself and Garamond was indeed erased from the system.
    SOLUTIONS?
    I tried using "Rember" (freeware memtest app) and RAM checked out fine. Disk Utility reported the disk was fine.
    I may consider re installing everything before my Genius Bar appointment (next available is "Tuesday 9:15am" at my nearest store), and I'd like to think that it's just this project file causing the problem (it's basically one Camera that dollies forward through four words in 3d space, pretty simple). However I want to prevent this from happening again and I'm worried there might be something wonky in the hardware on my Mac.
    I know this is all very strange, but has anyone heard of an issue like this or might know why that was happening?

    Jumpy mice gets mentioned, some attribute it to video problems I think.
    I assume you have the latest MS Optical driver.
    Always clone a system before installing apps or updates so you have a backup you can boot from.
    Don't rely on just Apple DU First Aid. Time to invest in 3rd party, though if you plan on jumping to Snow immediately might want to wait on that.
    You may find 3GB RAM is just not going to cut it though, that is extremely minimum and base system, not what you want for what you are doing. With quad 4-dimm setup, I'd look at either 4 x 2GB or 3 x 4GB to give you 8-12GB RAM. 3 x 2GB should be minimum (unless just using it for email and web).
    Also, optimize your files and storage if you haven't: boot drive, editing and scratch, media files on 3rd drive, maybe setup 2-3 drive RAID at some point.
    Lot of adjusting and changes that go along with any new system regardless of what you ran before.

  • Adobe PDF 9.0 Virtual Printer: file goes missing

    Hi there
    When attempting to print from Filemaker Pro using the Acrobat 9.0 Printer, I am prompted for the location for the saved file, and the job then goes on to print. The logs indicate that the job completes successfully but the file is nowhere to be found.
    It's not in the specified location, and it's nowhere else in the filesystem either.
    The issue tends to occur with larger jobs - smaller jobs output the pdf in the correct location fine most of the time. Also, the Acrobat 9.0 driver dialog allows me to print a test page fine as well...
    Any clues on this would be appreciated...

    I'd suggest you try the following:
    1) Delete the Printer, Repair the installation of Acrobat (under the
    help menu) and see if this cures the problem, if not
    2) Reset the Printer system.
    I print regularly from File Maker Advanced version 8.5 with no issue
    under OS 10.5.5. I don't know which version you are running of either
    FileMaker or OS.
    Mike

  • TS4009 Has anyone else had a problem with files going missing in iCloud?  I'm use Scanner Pro which saves files to iCloud and some of my older files are MIA

    I use Scanner Pro, which is a document scanning app.  It scans (takes a picture of) the documents then saves as a "spdoc" and uploads to iCloud, then retrieves the file when you need to view or send.  I had some important tax docs saved and when I went to open them today they can't be retrieved.  The folder containing the files shows the the space is allocated for the files (says folder is 8 mb and the files I can see in the folder are only taking up 6.2 mbs). 
    Is there anything I can do to retrieve these files.  They are super important!
    Thanks for your help!

    I was running into the same problem with my Mac.  I could not open nor find an application that would open a .spdoc file extension.  However, I went to my iPad and was able to open the file using the Scanner Pro app.  I hope this helps.

  • Help, the last part of my file goes missing

    I am adjusting my file so it fits a certain length. for example, 20 characters per line (the length is not fixed). I broke down the file into words and put it in an Arraylist(al), I check the length of the line and add a word if it is not over the limit then put the line in another ArrayList(adjLines) if the next word will cause it to exceed the limit. It is doing the job except for the last line where some words get cut-off so I'm wondering, what did I overlook in my code???
    StringBuilder str = new StringBuilder(maxLength);
              String temp = "";
              int idx = 0;
              while(idx < al.size())
                   temp = al.get(idx);
                   if ((str.length() + temp.length()) <= maxLength) // FIX ADJUSTMENTS HERE!!!!!!!!!!
                        str.append(temp + " ");
                        idx++;
                   else
                        adjLines.add(str.toString().trim());
                        str.delete(0,str.capacity());
                 adjLines.add(temp)

    Change the last line toadjLines.add(str.toString().trim());db

  • Sharpening brush in exported file

    I  have a problem with sharpen brush. It seems I lost it exporting version vs jpeg or tiff. I  used it strongly in a portion of the image just to try and  in exported file is missing. I have read about viewing at 100% etc, but I need to view the same thing between Aperture and other application. I have a 15" macbook pro and it is impossible to view and use a  100% image during sharpening brush. With Lightroom, for example, it doesn't happen. Is there a solution?

    I add other info.
    If you look at the exported image to 100%, then the heavy sharpened areas  are mantained.
    However I find  of little use, in fact unreliable, adjust sharpen an image in a preview of Aperture not 100% without having control of how it will be exported once. To work 100% do not talk about .... with a 15 "!
    By

  • Illustrator CS6 : Some layers are missing when exporting files

    Hello all,
    I'm trying to export my project for use in Adobe Director 11, and I'm encountering a problem with the export feature that I believe to be a legit bug, and seeing from the amount of threads related with my problem, I believe some other people have encountered it too. I provided some pics for an easier explanation.
    So.. firstly, the image below is the screenshot of my project in AI, combination of paths, mask and pictures.
    Next I'm trying to export it to PNG without artboard & use transparent background. Notice that the export preview still shows the image that I expect as the export result.
    Below is the exported image.
    As you can see, some part of the project is 'missing' in the exported files. The problem still occurred no matter I exported it to png, jpg, even psd. Changing the export resolution and anti-aliasing setting doesn't help.
    I've encountered the same problem with different project for at least 5 times in like the last 8 months, and I find that each time I encountered the problem, it can only be temporary fixed by some specific procedures and sometimes each problem won't work with the same workaround. For example, one time I can properly export the project after I copy & paste the 'missing' layers and delete the original layers, in other time I have to select the 'missing' layers, move it a little and then move them back to its first location in order to export it properly. I also find that copying the entire layer that I want to export to a new document works a few times. I can't remember some other solutions I have tried that works, but if these solutions doesn't work anymore, I have to find another and it's pretty confusing since it happen to be 'random'.
    Since I believe that this happen to be a program bug, I would love if one of those Adobe guy read this post and direct the problem directly to the AI team or something so it can be fixed in the next updates. Until then, anyone ever experienced the problem? What did you guys do to 'fix' the problem?
    Many thanks for people who help me here.
    P.S. As I'm writing the last part, exporting my current project to PNG with transparent background seems to be working properly after I tried to export to PNG with white as the background color, I dunno  why, but it works now. I still want to know other workarounds to 'fix' the problem though, that could be helpful for other people out there.

    The first thing I was going to ask was if you saved as PDF earlier, but then I noticed you specifically said not in your first post.  I have lost two layered high res images in the last couple of months due to getting mixed up after exporting to PDF for print.  I still don't know how it happened, but I have to assume user error.
    I also note you are using CS6 which has the JDI features, so saving as a JPG would not have flaterened the layers.  I almost never use TIFF as it feels better to use PSD as it is the native format, and it limits the opertunity to mess up.  So I am not being very helpful.  If you absolutely didn't save out as JPG or PFD or similar, then you have to start thinking bug, but I have never heard of this happening outside of user error.
    [EDIT]  Whoops.  Overlap.  I called for my breakfast half way through typing my answer.  Glad you got it fixed

  • Why are my exported files not going to me email?  I have used 3 different ones.

    Why are my exported files not going to my email (receipts &amp; business card)?  I have used 3 different ones...2 yahoo and 1 hotmail.  I have checked spam box also.

    For the Receipts app I chose to export the info as a PDF file..an email was requested..I entered info and clicked send.  For the Business Card app I chose Send, not Print..an email was requested..I entered info and clicked send.  I haven't received anything, not even in my spam folder.

  • Hi thee.  As logical as I can be.  I export a file back into my folder as a PSD.  I then export that file to PS.  Work on it, save and return it to LR.  The file goes to the bottom of the folder from where I have to put it back in the original place, taki

    Hi thee.  As logical as I can be.  I export a file back into my folder as a PSD.  I then export that file to PS.  Work on it, save and return it to LR.  The file goes to the bottom of the folder from where I have to put it back in the original place, taking time and driving me slightly mad.  Why does the file not go back to where it came from please?  Thanks  Tim

    Umm, but this folder is an amalgam of two cameras and five cards, and I want them in capture order!  Thanks for trying though Jim.
    Cheers
    Tim

  • Multipackage missing export file

    I want to write two applets and they are not in the same package.
    The app1/class1 in package1 will import app2/class2 in package2. Also, the app2/class2 in package2 will import app1/class1 in package1.
    When compiling, missing export file errors occur. How to solve this errors?

    In Java Card you can think of a package as an individual JAR file. When you build a package, you need all of the details of any imported packages for the converter to work. This means you need to have successfully converted all packages you import. This is why you cannot convert with a circular reference like you have. What you need to do is to split the common code into a library package that can be used by both applets. You can also just move them into the same package.
    - Shane

  • Missing export file for  package java/lang

    Hello,
    I have Eclipse with JCOP Tools installed and I have a small Applet which runs fine with Java Card 2.2.1 which is part of the JCOP Tools. I want to try the [Extented Length APDU which is defined in Java Card 2.2.2|http://www.cs.ru.nl/~tews/jcdocs/app-notes-2.2.2/extapdu.html] so I downloaded the developpment kit 2.2.2 from sun which includes the api.jar.
    In my Eclipse project, when I remove the 2.2.1 api jar and add the 2.2.2 instead, I get the following "compilation" error "
    Description     Resource     Path     Location     Type
    missing export file for package java/lang     MyApplet.java     MyApplet/src/com/...     Unknown     com.ibm.bluez.jcop.eclipse.jcopmarker
    Do you have an idea what is the problem ?
    Is it possible to use JCOP Tools with Java Card 2.2.2 ?
    How can I know which VM is running my JavaCard ? If it is 2.2.1 it would actually be useless to develop an Applet using 2.2.2. and on the card ther eis written only JCOP31 V2.2
    Thanks,
    Tex
    Edited by: Tex-Twil on May 14, 2009 8:09 AM

    lexdabear wrote:
    javacard2008 wrote:
    It impossible to use current version of JCOP Tools with Java Card 2.2.2 before JCOP new version released.Bullsh*t. JCOP Tools v3.2.7 supports Java Card 2.2.2, since the latest JCOP v2.4.1 runs Java Card 2.2.2.ok. I think I have JCOP v3.1.1 which came with the JavaCards that I bought. Where can I get a newer version ? On NXP site there is not much about JCOP :(
    regards,
    Tex

  • Bug : sortascending_ena.png file is missing when using export to html code

    In SQL Developer 3.2.10.09 :
    Make an explain plan of an sql request with a "SORT".
    Export this explain to html code to a directory.
    The HTML file is using a sortascending_ena.png image file but this file is missing in the images sub directory.

    Hi,
    Not sure why that png (and lots of others too) is not getting copied into the images sub-directory of your user application data folder for SQL Developer. Probably each component is supposed to be responsible for checking that directory and copying images over there as needed.
    I logged a bug:
    Bug 14770237 - EXPLAIN PLAN EXPORT HTML NOT COPYING ALL REQD PNG FILES TO IMAGES DIR
    You can extract it from your installation's ...\sqldeveloper\sqldeveloper\extensions\oracle.sqldeveloper.jar file, from directory \oracle\dbtools\raptor\images using one of the unzip utilities.
    Regards,
    Gary
    SQL Developer Team

  • HT202879 How do I fix "the required index.xml file is missing?" when opening Pages documents?

    I can't open any documents from my son's iPad.  Error message: the required index.xml file is missing.  How do I fix this error so that I can open his Pages documents?  Before I ran the latest update as prompted when I opened Pages, I WAS able to open and view the document.
    I did try restoring Pages using my Time Machine, but it still won't open the Pages document.
    I have a brand new iMac that I just set up last week. 
    Son uses iPad at school, so we update when the school asks him to update.  Will doublecheck his version of Pages but it should be pretty recent.
    In general I don't like using Pages because it lacks a lot of the backwards / forwards compatibilty of Microsoft Word. 
    However, it is what my son uses with the iPad. 
    Most of the time I have to export his files as WORD files because we never seem to have compatible versions of Pages between the iPad and the desktop iMacs. 
    Where can I recommend that Apple improve its compatibility issues with Pages?
    This week I am going to receive a new iPad at my school (I am a teacher) but I am 100% certain that it will not be compatible with the older version of Pages on my classroom iMac.  I also avoid using Keynote for the same reason.  I have 15 year old Power Points that I can still open, but I am hesitant to switch over to Keynote because I want to be able to open my files any time, any where.
    Please advise.

    Not sure what v5 is. Someone helped me and opened it through Pages 5.2, through the program, rather than the Finder. Thanks for making a suggestion!

  • MXF export flagged as "out of disk space" - never finishes

    Have an AVC-INTRA project which has a motion jpeg sequence in it.  When I attempt to export the entire sequence as MXF - avc-intra 100 the export through media encoder stops between 50 and 65% and a message comes up by windows indicating that an application needs to close.  Media Encoder CS5 5.0.1 does not complete the encoding and generates an error messege "out of disk space"  However, there is ample space on the drive being used to export the project.  Is there a file size limit to mxf export or duration limit to mxf export?  DO NOT UNDERSTAND why this export is not completing!
    Need help!  Thanks.

    At first I thought I had a rendering issue with mxf but discovered Premiere Pro CS5 was creating the CONTENTS folder for the mxf on the right drive as per panasonics requirements.  Of course any sequence you export as an MXF file gets broken up into chunks in the contents folder.  One concern I have is if there is a limit in length or file size that the export is being limited to.  My sequence is 90 minutes in length.  Or better yet is the MXF container running out of chunk names for the sequence thus terminating the export.  Not sure on both.  I remember back in 1.5 or 2 when there was a bug concerning rendering long sequences but I thought Adobe has gotten past those types of errors.  Maybe not.  I checked the project size and there doesn't seem to be anything unusually large or strange going on with the project size.  This sequence is picture only with no audio.  If anyone else has a long sequence I recommend trying this to see if you get the same results.  Export should not be duration limited.  The other area I am thinking could be a problem is with memory management.  I've got 12 gigs of ram and I set media encoder to use a max of 9 gigs.  I'm wondering is there is something loosing track of memory on a longer export.  Created a new project and will try again.  This is my fourth attempt today.
    Rob

Maybe you are looking for