.mxf footage not working in Premiere cs6?

I am trying to use my Sony fs7 footage in a project but PP cs6 doesn't read it. In fact it always crashes the program! What is happening? How do I fix this?

I open the footage in prelude and then it will crash. Same with Premiere....

Similar Messages

Transitions not working in Premiere CS6.Video was color corrected in AE 6 and sent back to PPro cs6.

I exported my film to AE6 from Premiere CS6 for color-correction and got it back to Premiere Pro through DYNAMIC LINK.Now,the problem is that AE has discarded all the transitions and also cross-dissolve and film-dissolve don't seem to work on this color-corrected video.I am able to apply the transitions but they don't work....somebody please help!

As Jim said, not all effects and transitions are properly translated when you replace a group of clips with dynamically linked AE composition. Actually you should have noticed that your cross-dissolves etc. had been replaced with black solid layers in After Effects, which didn't reflect your PrPro transitions.
Now you can jump back to your AE project and fix broken transitions there.
For your future work you should keep it in mind and decide whether to replace a group of clips (and, therefore, fix broken transitions in After Effects) or a single clip, taking care of its handles.

File menu does not work in Premiere CS6

For some reason, I am having issues with using the File menu in premiere CS6. I cannot close the application at all. Keyboard shortcuts though they register will not make the propgram respond either. I know this is an issolated issue on this machine in our group. Any suggestions? I've done permission fixes, tossed out the preference file for premiere. When I do force quit the app a message come up saying Premiere had a critical issue and shutdown. Or something along the lines.
Thanks

What Jim said... and the next time you ask a question, please provide more information - Information FAQ http://forums.adobe.com/message/4200840
Knowing more about your computer and operating system is usually going to help

My GTX580 is not working with premiere cs6

I just bought a GTX580 in the hopes of getting faster rendering and exporting.
Premiere says that it's enabled "Mercury playback engine GPU Acce..." But when i export the CPU works instead of the GPU, Any ideas? Thanks .

Of course there are many more Premiere effects and features that are MPE accelerated if you use them,here are some:
• scaling (details here) • deinterlacing • blending modes • color space conversions • Alpha Adjust • Basic 3D • Black & White • Brightness & Contrast • Color Balance (RGB) • Color Pass • Color Replace • Crop • Drop Shadow • Extract • Fast Color Corrector • Feather Edges • Gamma Correction • Garbage Matte (4, 8, 16) • Gaussian Blur • Horizontal Flip • Levels • Luma Corrector • Luma Curve • Noise • Proc Amp • RGB Curves • RGB Color Corrector • Sharpen • Three-way Color Corrector • Timecode • Tint • Track Matte • Ultra Keyer • Video Limiter • Vertical Flip • Cross Dissolve • Dip to Black • Dip to White • Film Dissolve • Additive Dissolve • Invert • Directional Blur • Fast Blur • frame rate differences • field order differences • pixel aspect ratio differences • frame size differences • media with different alpha channel representations •

Does ARRI RAW footage even work in Premiere Pro CC?

Does ARRI RAW footage even work in Premiere Pro CC? After importing, some footage just says "media pending", and some just appears as a black video. The interface is also extremely sticky. I am working on a current generation Mac Pro, so I don't think it can be performance issues.
The footage seems to work fine on my old PC in Premiere Pro CS6. I was wondering if CC lacks the ability to process ARRI RAW.
Thank you
- Tom

OK. Think I've got it now thanks to looking at the short keys and searching for "Full Screen". The upper left key is "`" which looks like a grave - a slightly angled single quote. But when I look at the "Application" setting for Toggle full screen it is set to "'" - a "normal" single quote. Sure enough, if I hit the normal single quote key the toggle works.
I have not been anywhere near the hotkeys and can't imagine why anything would change it from a grave key to a single quote - especially as they look almost identical on the screen. I'm guessing that Adobe changed this (maybe only for international users?)
Anyway I now know how to toggle full screen, although it makes the "Premiere" keyboard with its big purple key for "Toggle full screen" redundant. Does make me wonder what the shortcut key of "'" or CTRL + "'" gives that I'm presumably missing since it appears to have been remapped.

Keyboard Shortcuts aren't working! Premiere CS6

Hi All,
I'm working on Premiere CS6, I'm trying to use the shuttle slow keyboard shortcuts (K-J) and (K-L) but they aren't working. could you please help me!!
I noticed that in the Premiere's keyboard shortcuts directory they say that the shortcuts are (shift+J),(shift+K) I tried them but again it's not working..i need the one i mentioned above because it slows the clip frame by frame(means that if there was a person acting in my video he moves and talks like a robot not as a slow motion) I hope I explained that well.
p.s. I'm using a mac
Thank you.
Sarah

Have they ever worked? If so, remember that you have to have the Timeline panel or the Program Monitor active in order for those shortcuts to work.
Cheers,
Jeff

AIR SDK 17 (BETA) is not working with Flash CS6

Hi,
The latest AIR SDK 17 is not working with Flash CS6.
I tried to publish and install an iOS app to my connected device via USB but I always get an error "Check if iTunes is installed".
The latest stable AIR SDK 16 is working fine, and yes, iTunes is installed on my PC.
DETAILS:
- Flash CS6
- AIR SDK 17
- System: Windows 8,1
- iPodTouch with iOS 8.1
REPRODUCE:
Open new AIR iOS template and publish/install it to a USB connected iOS 8.1 device.
Anyone else got that error?

I was getting this intermittently. Not a super problem. A remove and install in iTunes gets it loaded (after you tell ITunes where it is).

I updated my mac's OS to Yosemite and now my eye drop tool will NOT work inside premiere pro. Can anyone help me fix this issue?

The eyedropper tool for selecting colors to key out or to fill text will not work inside premiere pro, this error started when I updated my mac os to yosemite.

Hi Transportation,
Does the error occur in OS X 10.9? If not, why not remain at OS X 10.9? Is it necessary to run OS X 10.10?
The general rule of thumb is that when you are running software that is no longer tested or supported on a new operating system, you have to prepare for anomalies like this. You may want to install a separate bootable hard drive with OS X 10.9 on it so you can continue running that software more reliably.
Hope that helps,
Kevin

For some reason the masking layer is not working in my CS6. I know I have all the settings correct!

For some reason the masking layer is not working in my CS6. I know have everything set correctly! Please help.

Hard to guess on this type of question at you are not offering any tip on what you are doing. A screen shot might help to see how you have things set.

Linotype Decoration Pi will not work with InDesign CS6

Linotype Decoration Pi Font will not work with InDesign CS6. If I buy a new version from the Sdobr store, will it work?

Has the font ever worked in CS6? If not, did it work in a previous version? Did it ever work in any version of ID using your current OS version? I ask the last question because I helped someone on another forum today that had a font that did not survive migration on their Mac. In their case, the font was selectable but the application would crash exporting to PDF or printing.
I'm using a PC. It works here.
It is listed along with the fonts that start with D here.
Mike

Media Encoder CS6 not working with Premiere

Hi
I have been merrily editing a lager job in Adobe Premiere CS6 and then queuing the time lines to export in media encoder CS6 done the entire job everything rendered fine then Bam all of a sudden when I try and render I get all the audio a couple of frames of video then just black!!
I have tried different codecs same result, I have tried different timelines same result, When I export directly out of Premiere without going through Media encoder all works fine, when I try encoding a file directly in media encoder works ok, It just seems to be the link between Premiere and Media encoder that not working as it should
Anyone got any ideas?
Hi Folks
Has no one had an issue exporting to Media encoder from Adobe Premiere CS6?

Any chance this gets fixed soon? I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio. I've also noticed the video jumps around even when it does have audio. Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually. I've also tried just dropping the file structure from the card straight to the hard drive. It's a huge problem, and is keeping me from making the switch fully from FCP 7.

USB Mic not working in Premiere Pro CS6 for Mac

So I've been editing in Premiere Pro CS6 on a mac for 6 months now. I have to do a temp VO for a project and I thought I'd try the Narration feature in the mixer. For some reason my USB mic doesn't show up in the Audio Hardware so I can't pick it. The same mic shows up in the Mac Audio Settings and even shows up in Audition. I've been having to use Audition but was curious to see if anyone out there has gotten a USB mic to work in Premiere Pro on a Mac. Would be a really cool feature if it worked.
Greg Jones
D7,Inc.

Some USB mics work fine, but many do not. It can depend on the exact mic, or might require a different ASIO driver (maybe something like ASIO4All?), or different ASIO setting, to work.
Good luck,
Hunt

Secondary color correction not working in Premiere CC

Greetings,
I'm unable to build secondary color correction masks in Three Way Color Corrector, RGB Curves etc in the current version of Premiere CC.
In any of these plugins, when I check "show mask" I get the usual white slate filling the frame. But when I use the color picker to make a selection the whole frame stays white. It appears that I'm making selections but it's not building the mask for some reason. When making an extreme color change I can see that the mask is not building as it affects the whole frame.
This started after upgrading to CC. I've recently updated to the most up to date version (yesterday) and am still having the same problem.
Premiere CC 2014.1 Release
8.1.0 (81) Build
Macbook Pro Retina, 15" Late 2013
2Gh Intel Core i7
8Gb
Intel Iris Pro 1536Mb
Yosemite Version 10.10
*note-my Colleague is not having this problem, he's working on the same OS and same CC build but he has an Imac. So I'm guessing this problem is unique to my hardware config.
Anybody else have this problem or know of a fix?

I have the same Problem new MAC OS Premier Pro CC or Premier Pro CS6 both have an issue with the Title Tool. If you open the title tool and try to make color changes or change size of the font it sticks at the default color and default font. SOmetimes the title tool will work and then when I exit it's back to the default first type location, default font and default color. Sometimes it will not even let me exit the Title Tool.
Please help I have Projects I'm working on Deadlines and I pay a monthly Fee for Software that works and it's not working.
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          6-Core Intel Xeon
Processor Speed:          2.4 GHz
Number of Processors:          2
Total Number of Cores:          12
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          12 MB
Memory:          16 GB
Software OS X 10.9 (13A603)
Graphics ATI Radeon HD 5770 1024 MB

Smart rendering for DNxHD quicktimes not working in Premiere Pro CC

Hi if I understand things correcty PPCC should be able to smart render DNxHD codec in a quicktime wrapper back . If so this does not appear to be working. I am noticing small differences if I pull in a DNxHD quickitme clip in to Premiere and just render straight back out again no effects just cuts as DNxHD Quicktime. My sequence is set up to be the same as the codec. Although I do notice that trying to set the exact settings for the quicktime codec is not easy as it resets back to the defaults of DNxHD 220 59.94i so maybe this has something to do with it and their is no option to choose the MXF setting for my medi a as Adobe have neglected to make a DNxHD115 preset.
If you look on the YC waveform you can see the changes occuring when you compare the two side by side. This however does not happen if you render out as Opt1a MXF as it does appear to smart render and when ingested back in you see no difference with the source DNxHD clip. I also notice that when you choose the Opt1a option it has an extra check box for smart rendering.
Anyone noticed this. It all works perfectly for ProRes quickitmes so just wondering why its not working for DNxHD quicktimes.
Simon

Hi Simon,
Here's what I have for you:
Smart Render support for DNxHD wrapped in QuickTime was added in Premiere Pro CC
You must have Avid codecs installed
No option to check to enable smart rendering is needed, Premiere Pro always tries to smart render by default
The first thing I would check is to see if the DNxHD (QuickTime) codecs are installed or not.
Thanks,
Kevin

AVI file only plays sound, NOT video in Premiere CS6 and Element

I tried getting this to work in Premiere pro cs6 or premiere element but it wouldn't accept this avi video file. When importing the avi file to either application, the file is imported but it shows up as an audio with no video. The video does play just fine in Windows Media Player. The file is archived as an avi file from a lorex dvr system with a codec IMM4. It is encrypted with the date and time which is very important to maintain.
I have tried the following, but same problem of no video, only sound persists.
Download the latest 32-bit static build of FFmpeg from here: Zeranoe FFmpeg - Builds
Open the archive; you'll probably need 7-Zip since the archive is a .7z file. Extract the ffmpeg.exe file in the archive (it's in the "bin" folder) to the folder containing your AVIs.
Create a text document (Notepad is fine) called "avi2mp4.bat" (no quotes) in the same folder as the AVIs, making sure to change the default TXT extension to BAT.
Paste the following into the BAT file: @ECHO OFF
for %%a in (*.avi) do ffmpeg -i "%%a" -vcodec copy -acodec copy -f mp4 -y "%%~na".mp4
Once you save the BAT file, double-click it; your AVIs will be rewrapped to MP4s without any conversion. The MP4s will correctly import into Premiere Pro.
I would appreciate anyones insight on this matter.
The following is the GSpot report on the file:

I'm having the same problem.
CS3 works fine with the avi files, but CS6 can't decipher it.
Very aggravating - I thought CS6 was supposed to be an improvement.
Luckily I have not uninstalled CS3.
One solution I found was using Windows Movie Maker to open the file and then save it to a WMV format.
That opened correctly in CS6.
It's still another step I didn't need in CS3.

.mxf footage not working in Premiere cs6?

Similar Messages

Maybe you are looking for