MXP's and SIP Registration Failure Using a FQDN

A majority of our MXP's will not register to our SIP Server using a FQDN. They will register using the SIP Server IP Address. Why do they not like the FQDN? Our C Series, EX, and SX systems do not have this problem.

yes to both questions. some of the MXP's show that they are registered with the FQDN, but that the Active SIP Server Address is the FQDN. I was expecting to see the IP Address of the VCS it is registered to.The majority just won't register with the FQDN, but do with an IP Address.
All of our other non-MXP endpoints register just fine using the FQDN.
The same FQDN is used for Gatekeeper and SIP registration. The MXP's register to the gatekeeper as expected. It is just the SIP Registration.
The majority are running F9.3.3. Some others are running anywhere from F9.02 to F9.3.1, but all software releases are affected the same way.

Similar Messages

Linksys SPA9000 and SIP registration with an E61

HI, I have my own IP telephony but I want to register my phone to be used with my Linksys SPA9000, anybody has the setup to do this with an E61?

Unfortunately my Nokia, an N95, can't register with the SPA9000 either. I managed to 'partially' register the phone. The phone registered itself an i saw it in the pbx status page.
(http:// - ip-adres of SPA9000 - /admin/status). The phone itself keeps notifying that it couldn't establish a connection and won't connect to the PBX.
What did the trick is realising that the PBX proxy listens to port 6060. So i added that port in the phone for the proxy and registrar. I know it's a part of the solution and i am working on it.
My plan
- setting up a syslog service on my linux server and search the logs for error mesages during the registration proces
- upgrading my firmware. The SPA9000 is up-to-date, but my N95 doesn't have the latest version yet. So i want to check the release notes from Nokia for information about solved SIP errors.
- checking the forums for tips
- ask Nokia for help

CME 7.1 with SCCP 7940G phones and SIP connection to a VOIP provider - inbound outbound fails

Here's a quick and dirty diagram of a CME 7.1 configuration. The phone can all call each other but something is not quite right with the SIP provider. The registrar and SIP registration pieces are working but most of the configuration examples that I've seen make me think that the CME router was being used as the edge device to the internet. From my drawing, you can see that is not the case here. My edge device is a Cisco ASA5505 with 9.2.x software running. I might be missing something in the SIP gateway knowledge department. Without diving into the configuration, I'm wondering if SIP messages are failing for calls because of NAT'ing? Trying to do searches has been tricky because I keep running into information that is more about setting up CME for SIP phones or just getting SIP to work between CME and a SIP provider. I have that part working. I'm just a bit unsure about how an SCCP 7940G gets an outbound call or even gets one to come in.
When I dial from my cell phone to the pilot number, there are no rings, it just goes to the VOIP provider's voice mail. When I try to dial out, I get a fast busy.
So, is NAT a consideration? Will the SIP gateway set up a call (forward) via the pre-established SIP connection? Yeah, I do sound like a newb.
If anyone has good information about, let's say, an inbound call and how that traffic flow works.
Thanks!

Have you configured your ASA to either NAT the IP address of the CME router or to do port forwarding for port 5060?

Reports using JPG and BLOB RenderOp failures

I am getting RenderOp failures using BLOB columns to store JPG images in reports. Reports seems only to work if the data is in TIFF format (massive storage req.) I have converted to LONG RAW to store the JPG images and the same report functions perfectly. I am on 10.1 release 2. and the reports are 10.1.0.2 (I use the designer as well). Is there some special magic to get reports to do as it claims (displays all formats for JPG). I am runnng paper layout only via the rwservlet - this all seems fine. I am using webUtil to replace the old calls (read_image_file). If I convert to TIFF - the 12K images take 500K in the database (but they do work) - if it is JPEG - they cannot be displayed, despite what the documentation says (I will use LONG RAW - but I would rather use the BLOB for support reasons). Anyone know the magic?

Hello,
Check if your JPG images are encoded with the "Progressive Encoding".
This method is not supported by Reports. Test to save your JPG images with the "Standard Encoding".
Regards

State of No Authentication in Asterisk SIP Registr...

I have been trying lots of combinations and permutations of registration entries in Asterisk's SIP.conf file.   I would be grateful if someone would let me know exactly what userid and password I need to include
The bulk of instructions I have been reading over the past half a day indicate that this form is correct.
register => [edited for privacy]
where bmdemo3 is the userid and REDACTED is the password for the Skype user I created under Skype Manager to represent Asterisk to Skype's SIP trunk.
In the output to the sip show registry command for Asterisk, there is one entry that suggests a registration for sip.skype.com:5060, however the column to the far right (entitled) State says "No Authentication".   That does not seem good.
The aforementioned userid and password log me in to that skype user's account (which I activated) and I can make and receive direct Skype calls using it.   Is there another userid and password I should be using instead?
I would greatly appreciate any guidance as to what I might be doing wrong.
Cheers,
Michael

Here is the output from the sip show registry command
ubuntu*CLI> sip show registry
Host                                    dnsmgr Username       Refresh State                Reg.Time
sip.skype.com:5060                      N      bmdemo3            120 No Authentication
1 SIP registrations.
Here is the SIP REGISTER message being rejected:
<--- SIP read from UDP:63.209.144.201:5060 --->
SIP/2.0 403 Forbidden
From: <sip:[email protected]>;tag=as333ae3e0
To: <sip:[email protected]>;tag=c990d13f-f1dd03ad-0-9c8aac96-0
Call-ID: [email protected]
CSeq: 102 REGISTER
Via: SIP/2.0/UDP 172.16.164.33:5060;branch=z9hG4bK0ae22ba3;rport=55060;received=96.241.233.63
Expires: 120
Contact: <sip:[email protected]:5060>
Content-Length: 0
<------------->
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: Header 0 [ 21]: SIP/2.0 403 Forbidden
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: Header 1 [ 48]: From: <sip:[email protected]>;tag=as333ae3e0
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: Header 2 [ 66]: To: <sip:[email protected]>;tag=c990d13f-f1dd03ad-0-9c8aac96-0
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: Header 3 [ 51]: Call-ID: [email protected]
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: Header 4 [ 18]: CSeq: 102 REGISTER
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: Header 5 [ 93]: Via: SIP/2.0/UDP 172.16.164.33:5060;branch=z9hG4bK0ae22ba3;rport=55060;received=96.241.233.63
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: Header 6 [ 12]: Expires: 120
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: Header 7 [ 35]: Contact: <sip:[email protected]:5060>
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: Header 8 [ 17]: Content-Length: 0
[Jul 1 16:21:41] VERBOSE[1081] chan_sip.c: --- (9 headers 0 lines) ---
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: = Looking for Call ID: [email protected] (Checking To) --From tag as333ae3e0 --To-tag c990d13f-f1dd03ad-0-9c8aac96-0
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: ** SIP TIMER: Cancelling retransmit of packet (reply received) Retransid #756
[Jul 1 16:21:41] DEBUG[1081] chan_sip.c: Stopping retransmission on '[email protected]' of Request 102: Match Found
[Jul 1 16:21:41] WARNING[1081] chan_sip.c: Forbidden - wrong password on authentication for REGISTER for 'bmdemo3' to 'sip.skype.com'

SIP Registration is blocked by BT or Home Hub

Hi all,
I have a problem, between 7.02PM and 11.02PM my SIP Softphone looses registration - every night. I have isolated the issue to my BT Infinity connection as when I close my WIFI and use 3G the SIP telephone registers sucessfully.
I 'think' it's either my Home Hub 3 or BT themselves blocking SIP Registration
Anyone seen this before?
Regards
Matt

Is your SIP telephone connected by a cable, or does it use WiFi?
If it uses WiFi, then you may be getting wireless interference, and you would need to select a different wireless channel.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Firmware Update and SIP on Nokia E61

I just upgraded my firmware for my Nokia E61 (3.0633.09.04) and since updating, i cannot get internet calls to work. SIP registration works as normal, but attempted internet calls just display number@ipaddress and nothing happens (ie no internet dialing).
i noticed that the internet telephone interface is different on the new firmware. perhaps a different setting is needed?
help?

sipphone and voipdiscount (via pbxes exchange). i used it just before upgrading no probs. backup just before upgrade, then upgrade, then tested to find no internet call.

Report GL Account Line Item with vendor name and VAT registration number

Hi,
Is there any standard SAP report/inquiry for GL Account Line Item like FBL3N, with information vendor name and VAT Registration Number (field STCEG) without using ABAP.
Thanks.

Hi,
We can get purchase register through T.Code: 'J1I2' by specifying condition types and tax codes.
We can't get 100% report from this T.Code.
Check it once.
Regards,
Padmaja N.

Directory Scan and Volume Structure Failure

My imac (white, 24") has been running slow and freezing up while attempting to preview files. Ran Disc Utility and OnyX, which gave me the following permission issues:
Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x
Repaired "usr/share/derby"
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/
But otherwise, both said the disk was fine.
Ran TechTools failed the Directory Scan, Format Scan, and Volume Scan. I restarted from a second partition on the same HD. This partition passed all tests.
I repeated all three tests on the original partition. This time, Disk Utility could not verify or repair the original partition and no longer recognized it as a valid startup disk. I erased the partition and restored from a Time Machine backup. Now, I get the following permission errors:
Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x
Repaired "usr/share/derby"
ACL found but not expected on "Library/Preferences/Audio"
Repaired "Library/Preferences/Audio"
ACL found but not expected on "Library/Preferences/com.apple.alf.plist"
Repaired "Library/Preferences/com.apple.alf.plist"
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/
And while once again OnyX and Disk Utility says the disk is fine, Tech Tools still reports a Directory Scan failure and Volume Structure failure. A subsequent Surface Scan passed.
Ideas? Is this a software failure or a hardware failure? Both partitions are running 10.6.3. This is the second HD on this imac, the previous 750GB failed completely and could not be restored.

Kyle W wrote:
It says permissions are repaired on those items, but when I verify permissions, they are still not right.
See Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore. It isn't that the permissions themselves are wrong but that the database of correct permissions on your hard drive the utility refers to has not been updated to reflect the permissions settings & directory structure changes in the most recent OS updates. This is a known issue that affects everyone, but as the article says, you can ignore it.
Mac is not experiencing the same slow down on routine items as it was before, but TechTools is still saying there's a problem.
What version of TechTools are you using? If it is not a current one it may not recognize the recent changes in the file system structure made in Snow Leopard.

Im trying to re-install Adobe photoshop elements and it says failure to install

I would like to say that your customer Service is the absolute worst I have ever spoken to... I am having trouble re-installing my photoshop elements 4.0 on my computer. I just used it yesterday and went to re-install it today because my computer had to be restored to factory settings. I waited 10 min and the phone hung up on me. I called back and waited 30 min and then hung up because it was taking so long. Then called back, complained to the first rep, he transferred me to another rep who transferred me and I waited 52 min for a CSR to tell me that I need to go to forums.com. This is terrible..what is there job if they are just referring people to a forum. I would love to download 12.0 at some point but I do not have the funds at this time and the 4.0 will get the job done, but it will not let me download. I need this asap for my job. I am wasting valuable time from my job and kids w/ computer problems.
Thanks
Jessica Bush

Duplicate post:
Im trying to re-install Adobe photoshop elements and it says failure to install

Macbook HD broken in after a year and a half of use!

My name is SAULO RICARDO LOPES, I pediatrician, I have 52 years of age and live in Guarapuava: a city of Parana, Brazil.
I am a computer fanatic, I use since 1994.
I ever have IBM PC but I have my dream was to buy a Macintosh: the symbol of quality, stability and durability.
One day I realize my dream.
On July 30, 2007, by Lojas Americas - CNPJ: 00.776.574/0007-41 in Brazil, bought a MacBook Intel Core2Duo 2.0Ghz, 1GB RAM, 80GB DVD / CDRW, under invoice No 145484, which cost me R$ 4000.00 at the time or today (1U $ = R$ 2,30) = U.S. $ 1,739 !
Very very expensive, I thought, but it is worth it.
Joined me as well as user mac.com and me.com!
I was very happy until the january 16, 2009.
The HD broke!
I, who had NEVER taken my Macbook out of the house, move it to anyone but me, when the morning I get one?
instead of HD.
Tested with the software as Apple's Boot Drive with the Drive Genius too.
The HD was completely unrecoverable even ...
I do not know if you are aware, but here in Brazil there are many technical assistance and trust me, in interior of Paraná without my Mac ..
I am desperate, sad and disappointed with the quality as disclosed Macintosh.
Fortunately, I have a great friend, electronic engineer.
Carefully dismantled the Mac, find the HD and also ask another.
We replace the HD with success, although we have slightly damaged the computer ...
I'm reinstalling all programs.
The HD is damaged brand HITACHI 80GB - P/N: 0A53318, MLC: 2.5 inch DAI905 AT 9.5 mm and is in my hands.
I am amazed: a year and a half of use and drop the HD of a Mac!
As this was happening?
What is that Apple security to their customers?
What is the measure that Apple will take in my case?
I wonder what kind of steps Apple will take in this regard.
I am amazing !!!
I await answers as soon as possible.
Sincerely,
SAUL RICARDO LOPES
Rua XV de Novembro, 4001 - 12 andar
Center - Guarapuava - Paraná - Brazil.
CEP: 85010-000 - PO Box: 371
Phone: 55 42 99771227
saulo.lopes @ mac.com
saulo.lopes @ me.com
saulo.lopes @ uol.com.br

I think you both need to calm down and think about things for a bit before you go on ranting diatribes about your hardware. The Hard Drive of a computer is an EXTREMELY complex piece of machinery. Hard drives CAN, and DO quite often, fail. It makes NO DIFFERENCE how often you do, or do not take the computer outdoors or carry it away from your home. Desktops that NEVER move, EVER, have had failing drives. Any complex piece of machinery is prone to failure. Hard drives have platters with moving heads that spin at thousands of rotations per minute. When something goes wrong with the mechanics, the drive is unable to read the data, and you simply lose it. People need to be aware that bad things happen to computer equipment. For data, you absolutely MUST HAVE A BACKUP. It is simple. Backups will save you if your hard drive dies. It is not so painful, other than the cost of replacing the drive.
As for your comment about why you bought the AppleCare? You bought it for EXACTLY THIS PURPOSE. Had you NOT purchased it, you would have had to replace BOTH of the failed drives AT YOUR EXPENSE. Or at least one of them. Switching to a Linux computer will MAKE NO DIFFERENCE. They use hard drives too, the Operating System does not matter. My advice to both of you, MAKE BACKUPS OF YOUR DATA. If you have OS 10.5, USE TIME MACHINE WITH AN EXTERNAL DRIVE. It doesnt get any easier. Good luck to both of you.

Drag and drop interaction failure captions

I have a drag and drop interaction with one drop target and multiple drag objects. Only one drag object is the correct answer. When a learner drags an incorrect drag object to the drag target I would like a failure caption -- that's pretty straightforward. However, I want a different failure capture for each of the wrong drag objects so that there is a different explanation of why each object is wrong. Then I need a success caption for when the correct drag object is dragged to the drop target.
Is this possible?

Hi Jay,
Yes, could create such a scenario, but the Submit button is not used in that case, because the feedback will appear immediately when a drag object has been placed on the target. Is that OK?
Here the work flow:
Besides the object, create all the feedback text containers that you need, correct and incorrect and label them so that they are easily recognizable. I labeled them FB_1, FB_2... because my objects were Drop1, Drop2...
Make those feedbacks initially invisible and group them in Gr_FB
Create the drag&drop in the normal way with one correct link
Select the target and in the in the D&D panel, click on the Accept button, change the settings like this
The advanced actions are pretty simple, standard, with two statements: Hide Gr_FB and Show FB_n (with the appropriate feedback container - you cannot use Shared actions in this dialog).
In the D&D panel, choose Infinite for the number of attempts and uncheck the Failure caption.
Lilybiri

SIP Registration Request not reaching provider

I have a home lab setup and recently decided to add PSTN access via a SIP trunk and termination. I got the applicable information from the provider, set up the IOS configuration, but I'm not registering. I checked the CCSIP messages logs, no response. I talked to the provider, they are not getting my messages at all. Other traffic to and from the internet passes just fine (including SSL VPN).
I've talked to my ISP many times, and they continually insist they do not block any traffic except port 25.
Here is the applicable configuration:
sip
bind control source-interface Vlan1
bind media source-interface Vlan1
session transport tcp
header-passing
no call service stop
sip-ua
credentials username XXXXXXXXX password 7 XXXXXXXXXXX realm XXXX
authentication username XXXXXXXXXXX password 7 XXXXXXXXXXXX
registrar ipv4:XX.XX.XX.XXX expires 3600
sip-server ipv4:XX.XX.XX.XXX
(the source button puts the whole post in source tags... annoying)
And here's the debug output from ccsip all:
Apr 10 21:17:33.091: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone CDT to SIP default timezone = GMT
Apr 10 21:17:33.091: //594/000000000000/SIP/Info/sipSPISendRegister: Associated container=0x4F7E3670 to Register
Apr 10 21:17:33.091: //594/000000000000/SIP/Transport/sipSPISendRegister: Sending REGISTER to the transport layer
Apr 10 21:17:33.091: //594/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE
Apr 10 21:17:33.091: //594/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4F3BB008, addr=XX.XX.XX.XX, port=5060, sentBy_port=0, local_addr=10.XX.XX.XX, is_req=1, transport=1, switch=0, callBack=0x0
Apr 10 21:17:33.091: //594/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
Apr 10 21:17:33.091: //594/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
Apr 10 21:17:33.091: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:Xx.XX.XX.XX, rport:5060 with laddr:Xx.XX.XX.Xx
Apr 10 21:17:33.091: //594/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4F3BB008
Apr 10 21:17:33.091: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4F3BB008, addr=XX.XX.XX.XX, port=5060, local_addr=10.Xx.XX.XX, connId=3 for UDP
I took out the message because I don't think it's relevant, and has too many IPs to XX out :)
Apr 10 21:17:37.091: //594/000000000000/SIP/Error/act_sent_register_wait_100: act_sent_register_wait_100: Out of retries
Apr 10 21:17:37.091: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIDecrementOverloadCount: Count:Local 0 Global 1
Apr 10 21:17:37.091: //594/000000000000/SIP/Error/ccsip_api_register_result_ind: Message Code Class 4xx Method Code 100 received for REGISTER
Apr 10 21:17:37.091: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_register_reset_dns_cache: CCSIP_REGISTER:: registrar 0 DNS resolved addr reset
Apr 10 21:17:37.091: //594/000000000000/SIP/Error/ccsip_api_register_result_ind: SIP Registration Retries Exhausted
Apr 10 21:17:37.091: //594/000000000000/SIP/Info/sipSPIRegPthruProcessResponse: Processing response w/ resp code == 408
Apr 10 21:17:37.091: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIGetRPCBFromRCB: Retreiving RCB [0x4FA37D28] from RPCB [0x0]
Apr 10 21:17:37.091: //594/000000000000/SIP/Error/sipSPIRegPthruProcessResponse: Error NO RPCB
Apr 10 21:17:37.091: //-1/xxxxxxxxxxxx/SIP/Info/ccsipRegisterStartRCBTimer: Starting timer for pattern XXXXXXXX for 180 seconds
Apr 10 21:17:37.091: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIDeleteContextFromTable: Context for key=[576] removed.
Apr 10 21:17:37.091: //594/000000000000/SIP/Info/sipSPIUdeleteCcbFromUACTable: ****Deleting from UAC table.
Apr 10 21:17:37.091: //594/000000000000/SIP/Info/sipSPIUdeleteCcbFromTable: Deleting from table. ccb=0x4B6CC660 key=AD7E2293-C01A11E3-80AEE452-E7A949D0
Apr 10 21:17:37.091: //594/000000000000/SIP/Info/sipSPIFlushEventBufferQueue: There are 0 events on the internal queue that are going to be free'd
Apr 10 21:17:37.091: //594/000000000000/SIP/Info/sipSPI_ipip_free_codec_profile: Codec Profiles Freed
Apr 10 21:17:37.091: //594/000000000000/SIP/Info/ccsip_offer_ans_delete:
Apr 10 21:17:37.091: //594/000000000000/SIP/Info/ccsip_iwf_delete:
Apr 10 21:17:37.091: //594/000000000000/SIP/Info/sipSPIUfreeOneCCB: Freeing ccb 4B6CC660

Nevermind; I downloaded a SIP phone app for my smart phone, got it to connect in the same network. After that, I put the gateway in a DMZ and it started working. Not entirely sure why it was required, but hey, it works!
Cheers

Approving Self-Registration request using API

Hi all
As an end user I have created a self registration request using using the method, createRegistrationRequest from utility factory.
Now as an approver , i wanted to approve the request. I have updated the Organization name using updateRegistrationUserDetails method in tcRequestOperationsIntf by passing
hashMap.put("Organizations.Organization Name",
"Requests");
reqOper.updateRegistrationUserDetails(reqAppSet
.getLongValue("Requests.Request ID"),hashMap);
This is working fine. However when I use the following procedure to approve this request ,
reqOper.setRequestResponse(reqAppSet
.getLongValue("Requests.Key"), getUsrKey("XELSYSADM"), "Approve");
it throws the following exception
Thor.API.Exceptions.tcAwaitingApprovalDataCompletionException
at com.thortech.xl.ejb.beansimpl.tcRequestOperationsBean.setRequestResponse(Unknown Source)
at com.thortech.xl.ejb.beans.tcRequestOperationsSession.setRequestResponse(Unknown Source)
What else needs to be done in this approving aspect for the task to be approved?
Thank you
Regards
shashidhar

Hi all
I found the solution,
along with this ,
hashMap.put("Organizations.Organization Name",
"Requests");
you need to update ,
Employee -Type and User Type
Thank you
shashidhar

Creating self registration request using OIM API

Hi guys,
When we try to create a self regisrtation request using OIM API , we ge the following exception:
We get this error when we set the following in Design console.
Does user have to provide challenge information during registration = FALSE
and passed an blank object in place of challenge question parameter in createSelfRegistrationRequest method in tcUtilityBaseClass.
19:22:17,218 ERROR [REQUESTS] Error: Failed to save REQ_CONSOLIDATED_DATA_VALUE
data for Create Entity.
java.lang.NullPointerException
at org.apache.xml.serializer.TreeWalker.dispatachChars(TreeWalker.java:2
44)
at org.apache.xml.serializer.TreeWalker.startNode(TreeWalker.java:414)
at org.apache.xml.serializer.TreeWalker.traverse(TreeWalker.java:143)
at org.apache.xalan.transformer.TransformerIdentityImpl.transform(Transf
ormerIdentityImpl.java:389)
at com.thortech.xl.dataobj.util.RequestDataConsolidator.convertNodeToXML
(Unknown Source)
at com.thortech.xl.dataobj.util.RequestDataConsolidator.addUser(Unknown
Source)
at com.thortech.xl.dataobj.tcDataBase.createRequestForCreateEntity(Unkno
wn Source)
at com.thortech.xl.dataobj.tcDataBase.createRegistrationRequest(Unknown
Source)
at com.thortech.xl.dataobj.tcDataBase.createRegistrationRequest(Unknown
Source)
at com.thortech.xl.ejb.beansimpl.tcUnauthenticatedOperationsBean.createR
egistrationRequest(Unknown Source)
at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession.createRe
gistrationRequest(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(S
tatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invo
ke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(Stat
elessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidation
Interceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInte
rceptor.java:121)
How do we create a self registration request , using OIM API , with and without challenge questions?

Well try this piece of code. This might be similar to yours but it worked perfectly for me. For you the error might be the attribute names which you are passing, it should be the one dfined in the FormMetaData xml as below.
     import Thor.API.tcUtilityFactory;
     // define you class below
     ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
     final Hashtable env = config.getAllSettings();
     Hashtable quesAns = new Hashtable();
     HashMap user = new HashMap();
     user.put("Users.User ID", "SelfTesting");
     user.put("Users.First Name", "SelfTesting");
     user.put("Users.Last Name", "SelfTesting");
     user.put("Users.Email", "[email protected]");
     user.put("Users.Password", "SelfTesting");
     user.put("ConfirmPassword", "SelfTesting");
     tcUtilityFactory.createRegistrationRequest(env, user, quesAns);
And for the query of challenge QnA, these are the following combinations possible:
1) Property Does user have to provide challenge information during registration set to TRUE
- During self-registration from web console, it will show you Challenge Questions section on the right. If you do not select any questions, it will thow you an error there itself.
- Doing it from API will create no difference(even if you pass a blank HashTable). The request will be created successfully and on completion when the user tries to login, it will ask for Security QnA.
2) Property Does user have to provide challenge information during registration set to FALSE
- During self-registration from web console, it doesn't show you Challenge Questions section on the right. The request will be created successfully and on completion when the user tries to login, it will ask for Security QnA.
- Doing it from API, you will have to pass a blank HashTable as in above code. The request will be created successfully and on completion when the user tries to login, it will ask for Security QnA.
Hope it works.
Thanks
Sunny

MXP's and SIP Registration Failure Using a FQDN

Similar Messages

Maybe you are looking for