My 1315 wont start after new color change

Please help cant find anything like hp director for xp i have windows 7 now what am i going to do i cant clean my computer the way i did in director cant find the cleaning ikon

Hi there ,
This article contains steps for cleaning your printheads under windows 7/vista .
Follow these steps to run a utility to clean the cartridges if you found defects on the extended self-test report.
Open the Printers folder:
Windows XP: Click Start , and then click Control Panel . In the Control Panel , double-click Printers and Faxes .
Windows Vista/7: Click the Windows icon ( ), and then click Control Panel . In the Control Panel , double-click Printers .
The Printers folder opens.
Right-click the icon for your product, and then click Printing Preferences . The Printing Preferences window opens.
In the Printing Preferences window, click the Services tab, and then click Service this device . The printer Toolbox opens.
Click the Device Services tab, and then click Clean the Print Cartridges .
In the next box, click Clean . The cleaning utility runs, and the product prints a page with an illustration.
Examine this test page for print-quality issues.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • Msi GX70 wont start after bios setting change

    Hello, can someone help me with issue? I changed 3 things in bios:
    I turn off integred graphic(i thinked that it will speed it up)
    Changed boot from ssd disc instead of cd rom
    and turn off logo from start.
    now i cant start my computer
    please help me with issue.
    can i reset bios without dissasembly laptop?
    sorry for my english never had it on shool;)

    Dear Meloon
    I have done the same stupid thing few months ago, but I have just enter BIOS without display, just click DEL to enter BIOS (yes, it's still there, you don't see it, because you don't have a GPU at the moment) and from there click key responsible for Load BIOS to Factory Default (F9), then hit Enter, then just reboot with F10 key. You will have your system fully functional after reboot.
    If you don't know which F key to click (I think it's F9 as far as I remember), you may use your arrows, hit right arrow 4 times (to Save & Exit), then 1 arrow down (to Load BIOS to Factory Default), hit Enter to load, hit Enter to confirm, reboot (F10 - Save & Reset).
    I hope it will help you. Please let me know.
    Sincerely

  • Iphone wont start after screen, lcd change.

    Ok so i had dropped my iphone and broke my digitizer and main lcd display. no problem my iphone still worked. So i changed my lcd and digitizer and now my iphone wont turn on. Nothing "nada" I already did that home button power button reset and no apple logo nothing. Plugged into charger and nothing no battery meter no sign of life. I have done this before with no problem but i dont know what i did wrong. Also not even itunes will pick it up.. someone please help me

    I completed the DFU mode and on my computer it would not work I think because of my security settings and I did not want to disable my antivirus so I used my moms computer who hasnt updated her antivirus and it worked using her laptop....when I did it on my computer I got Unknown Error 21 which when I researched it could have been the security on my computer so I would suggest this as well but also if you get an error its probably because of your security settings on  your antivirus....good luck and thanks gdgmacguy

  • Intel imac wont start after changing permission

    intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

    My apologies for the inept instructions.
    Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
    sudo su
    Press RETURN. Enter your admin password when prompted.  It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
    chown root:admin /Applications
    chmod 0775 /Applications
    chown root:admin /Library
    chmod 1775 /Library
    chown root:admin /System
    chmod 0775 /System
    chown root:admin /Users
    chmod 0775 /Users
    chmod -R -N /Applications
    chown -R :admin /Applications/*
    Again, my apologies.

  • 770-G45 wont start after ShutDown

    Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
    Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
    Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
    Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
    MS 7599 ver. 2.0
    Bios version 10.2
    MoBo is new bought it 3 days ago.
    PLEASE HELP!!!!!

    First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
    Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
    But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
    Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

  • Safari wont start after i installed avi player any suggestions?

    safari wont start after i installed a avi player any suggestions?

    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • My System wont start after setting FSB to 200

    My System wont start after I'd set my FSB to 200,
    when the system starts, nothing comes up, and my Pc screen LED just blinks,
    I have tryed to reseting the Bios but it doesn't help, have also tryed with new RAM and new Graphiccard but it doesnt help.
    Please help me:-(
    Am I resetting the Bios wrong? I set the jumper to safe mode and 100mhz, then I use the jumper to clear the CMOS. And the restart at set the jumpers back
    3ghz AMD BARTON
    NVIDIA nforce2 k7bn2 Delta
    512 DDR RAM PCI3200
    300WATT

    Quote
    Originally posted by roobster
    set the multiplier lower , FSB(200) X multiplier (ex.10.5) = 2100 MHz , and your voltage raise it a bit too let say 1,700 ( default is 1.650 ) If this doesn't work at once , keep booting . My rig started up after 5 times . Strange but true .
    does not work if he has a 3000.
    they are multiplier locked.

  • SSMS wont start after Installing SQLServer

    Hello,
     After SSMS wont start after updating VS2012. I have unistallled and installed a number of times but the error message I keep getting indicates that Visual Studio shell Isolated is missing. I have tried to install this directly from the set up dvd but
    no success.
    Also I noticed that VSShell is missing in the C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn.
    I am assuming that this has something to do with it.
    Can someone please tell me how to fix this?
    Thank you.
    here is the error message received

    Hi,
    Try the below solution and see how it works.
    Note: Take a backup of the key before make any changes on the registry keys.
    http://support.microsoft.com/kb/322756
    Start regedit.exe
    Go to HKEY_CURRENT_USER\Software\Microsoft\SQL Server Management Studio
    Delete 12.0_Config
    Restart ssms.exe
    Here is the original thread:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/aeff13b3-3960-4724-bb9a-7e585651d7f4/sql-server-2012-error
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Workflow notification mailer not starting after APPS pwd change

    Workflow notification mailer not starting after APPS pwd change
    The error in the WFMAILER log is
    [appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt
    wferr:
    - WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS
    cpid=1300061, logfile=/abprod/comn/admin/log/ABPROD_nalinoes04/WFMAILER1300061.txtparams=, status=Running, debuglevel= Error Done.[appprod@nalinoes04
    Can you please advice ?
    EBS 11.5.10.2
    DB 11.2.0.1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    There is no upgrade, just a usual APPS password changeYou still need to bounce the application services.
    The error you have posted above does not tell much about the issue. Please clear the log file, reproduce the issue, and check the log file then.The FNDCPGSC log file
    [Oct 23, 2012 12:42:42 PM CDT]:1351014162195:Thread[BES Dispatch Thread,5,main]:0:-1:nalinoes05:172.25.80.54:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-1327162 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @16720915 {oracle.apps.fnd.profiles.ExtendedProfileStore@9980d5}],mUniqueId=SVC-GSM-WFMLRSVC-1327162,mLevel=4}, oracle.jdbc.driver.OracleConnection@76ab2f, 10006, DEACTIVATED_SYSTEM, This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=N, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:XXAB_OPEN_IBE_WF_MAIL, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_!08^@@690^6@6$$^#9^#6#!0$04868!@$^86$!!`}0$8|&%%+++|9|*@, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESSED, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, ACCOUNT=svc_oracle_mail, DISCARD=DISCARD, FROM=ACCO Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://nalinoes04.abd.ad.acco.com:8000/pls/ABPROD, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=lin-hera.na.acco.com, OUTBOUND_SSL_ENABLED=N, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, MORE_INFO_ANSWERED=WFMAIL:MORE_INFO_ANSWERED, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=5, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=Y, OUTBOUND_SERVER=nalinoes04.abd.ad.acco.com, INBOUND_SSL_ENABLED=N})
    Please see these docs.
    How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
    Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
    Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
    Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
    Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
    How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
    Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
    Thanks,
    Hussein

  • Portege Z930-118 wont start after BIOS update

    my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
    Any help please

    Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
    In such case you need professional help by authorized Toshiba service provider.
    On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
    Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

  • [Athlon64] sytem wont start after i change settings in bios

    hi i have had this wierd problem with my system for a while know and the problem is this:
    when i change agp apaterur size or change the ddr voltage in bios the system wont start so i have to nullifie the bios to make the system go up again.
    the system works just fine otherwise.
    it is really anoying and wierd so i would really appreciate if i could get some help with this one.
    thx

    Some cards won't work with some voltages or apatures no matter what you do. Basically just reset the Bios with the jumper and only do so when the machine is unplugged or you can damage it. Reset the Bios and set to a known working setup on the apature. Leave the voltage be unless you know what you are about as that can fry a vid card or damage other parts if it is set wrong.

  • TS3694 Iphone wont start after it turned off

    I had an iphone 4 that i got 9 months ago. About a month ago the vibration stoppedworking... ok... i went to telia and got a new one changed, as soon as i got home... that one wouldnt work, it even broke my computer (how? first the usb ports wouldnt be working, so no mouse or keyboard) and then my windows wouldnt start.... no phone, no computer 2-3 days.... i managed to fix my computer, and get another phone new (this is relevant because i got a new os installed in my computer, clean install) lately my iphone would get stucked while usingsome apps and id had to switch them off and then hit them again to use them... Today while i was writting an sms... after i sent it... my phone switched off. Weird i though.... well lets keep going, i turned it on... and it wont turn on! it stays at the apple logo and then it restarts. (*** happened here). I went quiclky to itunes to fix it, to restore my iphone.... and BAM i got an error and it wont restore/update the iphone.
    I have tried doing a hard reset, it wont turn on.
    I cant put it in dfu mode since it starts "too quickly" or at least it feels like it starts directly into "connect to itunes" mode.so.... yea...

    Well first off my sleep button/power button does not work.  This is not new and I have been able to use my I phone 4 perfectly fine without it.  Yesterday it stopped working went to a totally black screen.  I have tried the Home button and signing into I tunes, but I tunes does not even recognize that I have aphone plugged in.  I am at a loss of what to do, I cannot force a restore because nothing is recognizing that the phone is plugged into the computer.  Interestingly when the phone went to black last night you could call it, never here anything and it would ring and never go to voicemail.  It was plugged in all night and now it goes to voicemail

  • ATV G2 wont start after restore

    Trying to restore ATV G2 using USB and iTUNES 11.0.4  After restore (which seems like it goes OK), ATV wont start up.  I get a slow blinking light, the apple screen, and then nothing.  Eventually light starts blinking fast.
    Is this a hardware issue?
    Have I restored the wong version of software/firmware to my ATV?

    Well, since I had a video signal, I assumed that the HDMI wasn't a problem.
    Network (WIFI- using a new Time Capsule Airport) worked with all other Apple devices in the house.
    Here's what I did to solve:
    Unplugged ATV2
    Waited 3 days (no particular reason- just no time to mess with it)
    Performed a restore again (power was not plugged in to ATV during restore)
    Reconnected.
    Now it works fine.
    Can't explain why.
    (I don't think anything changed over those 3 days)
    I guess if at first you don't restore, try, try again.
    Thanks

  • Safari wont start after Leopard software update

    After updating Leopard to 10.5.7, Safari wont start. I get an error message "Cant load Tastyapps AV plugin." or something to that effect.
    What gives? anyone know?

    I was using Videobox as a trial version (on the site you have the option of buying or trying for 30 days). After the 30 days it stopped working and I just moved it to the trash. I seems to have left something in Safari however that causes it to not want to start.
    Using Firefox i was able to go back to the Videobox site and download and install the trial version again. I was then given the option of installing the Safari plug in which i did. I then went to the Videobox menu and clicked on uninstall Safari plugin. and then i just moved videobox to the trash again using AppCleaner.
    So, you should be able to do the same thing. Just click on "download" instead of "buy" on the Videobox site. I'm sorry, I couldnt find the plugin files for manual deletion either.
    Maybe you should start a new thread and someone will know how to do that.
    Thanks!

  • Garageband wont start after update to ilife 09

    i update my ilife from 08 to 09, and now my garageband wont start anymore,it stucks everytime i start and the window "initialize" will not close.
    at this point i try everything, delete the preference files in "user -libery-preferences" ,starting with apple -install-DVD and repair permission.
    also delete garagaband 09 and re-install GB 08, after this and deleting pref-files again garagband 08 will start normaly
    then i try again to update to Gb 09...and it stucks again when the app launch.
    GB 09 will only shows the initialize window and stuck !
    Please help

    i had the same problem when i got my new macbook. I even tried to restore the whole OS then it finally works. But then it crashes again after i install some other program. I suspect the garageband 09 crash with some specific music program...but i still can't figure out which one. I've installed Garritan Personal orchestra, Emu 0404 driver, melodyn essential after that, i bet one of these program have problem.
    What about you, have you got any other music program in your mac?

Maybe you are looking for