My 17" iMac has seized!!

I am in Delhi, it is so hot here.
The iMac starts and gets to the grey screen with the apple and the spinning wheel. That is it.
I managed open the CD drive to put a disc in by sheer, it has always been a bad CD mechanism from the start.
Starting with either the 'C' key or the 'D' key held does nothing using the Instal disc.
Have done the PMU and anything else that I can do from outside but if I can't get in and load a boot disk to try repair it, then I am stumped.
The iMac is 17" flat swivel screen, with a newish 3yr old logic board, 3 yr old power supply and running Tiger.
Is my only option to take it to an Apple centre?

Mira,
It could be that your hard drive is dead or damaged. These can fail in ways that prevent the ATA bus from operating properly.
Re:
http://discussions.apple.com/thread.jspa?threadID=2436374&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2427649&tstart=0
You'd have to go inside so as to disconnect the hard drive and then try booting from the optical.
Richard

Similar Messages

  • 17" swivel iMac has seized

    My 17" iMac has siezed!!
    I am in Delhi, it is so hot here.
    The iMac starts and gets to the grey screen with the apple and the spinning wheel. That is it.
    I managed open the CD drive to put a disc in by sheer, it has always been a bad CD mechanism from the start.
    Starting with either the 'C' key or the 'D' key held does nothing using the Instal disc.
    Have done the PMU and anything else that I can do from outside but if I can't get in and load a boot disk to try repair it, then I am stumped.
    The iMac is 17" flat swivel screen, with a newish 3yr old logic board, 3 yr old power supply and running Tiger.
    Is my only option to take it to an Apple centre?

    Since your question is about a PPC G4 iMac, you might get a better response in the appropriate G4 forum (you've posted in the Intel iMac forum):
    http://discussions.apple.com/category.jspa?categoryID=137

  • TS3276 An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

    An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

    For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
    If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
    Problem solved.
    And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions.

  • My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

    My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

    I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited.  In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items.  I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible.  I simply deleted that item and now I don't have the situation you described and my wireless is connected.  Hope this helps!

  • IMac has become slow and freezes up

    For a few months now my iMac has been much slower than it used to be. Apps take longer to open, menu functions respond more slowly, folders and files take longer to open, pages longer to display, etc. Frequently the active window freezes and the colour wheel starts spinning for 10-15 seconds (it has been doing it twice since I started writing this sentence). This happens with all apps I am using, like Safari, Mail, Word and Excel, but particularly frequently in Logic Pro X. Sometimes when it happens (but not always), I get the error message "Disk too slow or system overload (-10010)". However, I upgraded to Logic Pro X about a year ago, and I never had this problem during the first number of months after the upgrade. I am aware that Logic uses a lot of CPU and memory, but, as mentioned, I also have the problem when Logic is not running. This leads me to think there might be something with the hard disk, although it beats me why it suddenly should have become slow. I am currently running everything from the built-in 1 TB hard disk. I have a 3.1 GHz Intel Core i5 CPU and 8 GB RAM. A full EtreCheck report with my system specifics is enclosed below. Can anyone help?
    EtreCheck version: 2.0.3 (88)
    Report generated 13. oktober 2014 20:02:21 CEST
    Hardware Information: ℹ️
      iMac (27-inch, Mid 2011) (Verified)
      iMac - model: iMac12,2
      1 3.1 GHz Intel Core i5 CPU: 4-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6970M - VRAM: 1024 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 3 days 11:48:59
    Disk Information: ℹ️
      ST31000528AS disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 999.35 GB (511.48 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-STDVDRW  GA32N 
      SAMSUNG MZ7TE512HMHP-00000 disk1 : (512,11 GB)
      S.M.A.R.T. Status: Verified
      LaCie (disk1s1) /Volumes/LaCie : 409.69 GB (409.15 GB free)
      LACIE SHARE (disk1s2) <not mounted> : 102.42 GB
    USB Information: ℹ️
      Line 6 GX
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Computer, Inc. IR Receiver
      Apple Internal Memory Card Reader
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
      LaCie Rugged THB USB3
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [loaded] com.line6.driver.xtaudio (7.3.6 - SDK 10.7) Support
      /System/Library/Extensions
      [not loaded] com.cisco.cscotun (1.0) Support
      [not loaded] com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) Support
      [not loaded] jp.co.yamaha.driver.YamahaSteinbergUSBAudio (1.6.0f1 - SDK 10.6) Support
    Launch Agents: ℹ️
      [invalid?] com.cisco.anyconnect.gui.plist Support
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.cisco.anyconnect.vpnagentd.plist Support
      [running] com.line6.l6ksettingmgr.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
    User Login Items: ℹ️
      AirPort-basestasjonsagent Program (/System/Library/CoreServices/AirPort Base Station Agent.app)
      witchdaemon Program (/Users/[redacted]/Library/PreferencePanes/Witch.prefPane/Contents/Resources/wi tchdaemon.app)
      iTunesHelper ProgramHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox Program (/Applications/Dropbox.app)
      DVDAuthorizeHelper Program (/Users/[redacted]/Library/Application Support/Helper/DVDAuthorizeHelper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      AdobePDFViewer: Version: 10.1.12 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      OVSHelper: Version: 1.1 Support
      QuickTime Plugin: Version: 7.7.3
      GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
      SharePointBrowserPlugin: Version: 14.3.4 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Audio Plug-ins: ℹ️
      DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
      Line6AudioMIDI  Support
      Perian  Support
      Witch  Support
      Yamaha Steinberg USB  Support
    Time Machine: ℹ️
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 999.35 GB Disk used: 487.87 GB
      Destinations:
      Data [Network]
      Total size: 2 TB
      Total number of backups: 110
      Oldest backup: 2013-05-13 07:48:39 +0000
      Last backup: 2014-10-13 17:31:26 +0000
      Size of backup disk: Adequate
      Backup size 2 TB > (Disk used 487.87 GB X 3)
    Top Processes by CPU: ℹ️
          47% Logic Pro X
          5% WindowServer
          3% com.apple.WebKit.Plugin.64
          0% sysmond
          0% coreaudiod
    Top Processes by Memory: ℹ️
      1.08 GB Logic Pro X
      292 MB Safari
      266 MB Finder
      249 MB com.apple.WebKit.WebContent
      198 MB com.apple.IconServicesAgent
    Virtual Memory Information: ℹ️
      33 MB Free RAM
      3.67 GB Active RAM
      3.68 GB Inactive RAM
      1.19 GB Wired RAM
      3.97 GB Page-ins
      4 MB Page-outs

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Hello,  My old email address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the pa

    Hello,
    My old emails address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the password for my old email address. I have seen some advice on these forums which suggest signing out of iCloud and then back in again. But when I start doing this it asks me if i want all the photos deleted that have not been downloaded onto the mac.
    I have had an iCloud account for quite sometime and I'm afraid of losing everything in my cloud if i sign out and sign in with a new id.
    Is this fear realistic?
    I know I can change back to my old email, sign out and then sign in wight he new one...
    Please help!

    This did not work for me.  My old email account for iCloud still pops up on my screen every time I open my macbook.  I've deleted it, reset it, every thing I can think of and it still shows up.  I think six months of this is more than enough time to wait.
    RDG

  • Imessage on my iMac has created two iMessage account both asking for Apple ID....and no option to - (delete) one of the two duplicate accounts....how can I delete one of them it just bothers me due to sign in issues....goes inactive when signed in on othe

    imessage on my iMac has created two iMessage account both asking for Apple ID....and no option to - (delete) one of the two duplicate accounts....how can I delete one of them it just bothers me due to sign in issues....when signed into one it signs out the other and goes inactive I just wanted to delete one of them so this issue doesn't happen....why doesn't it give the option to delete ONLY these two accounts

    1. Don't confuse "Apple ID" with iTunes Account ID.  You can have many Apple IDs but only one iTunes account active at a time.
    2. If you "changed" your iTunes account ID, you actually have 2 accounts - one under the old name plus the new name.
    3. You can't merge the accounts - they remain separate.  Apps purcahsed under the old account name will update ONLY WHEN THE PHONE IS SIGNED IN TO THE OLD ACCOUNT NAME  and visa versa.
    4. Likewise, you can sync only the apps, music, media purchased under the account the phone AND iTunes are signed in to.

  • I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so slow that I wind up having to crash and restart most of the time.  This is true regardless of the app I am using at the time.  The specs of th

    I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so unresponsive that I wind up having to crash and restart most of the time.  This is true regardless of the app I am using at the time.
    The specs of this iMac are:
    iMac 27 inch, late 2009 model with a 3.0 GHz Intel Core 2 Duo with 4 Gig 1067 Mhz DDR3, using OSX Lion 10.7.4 (11E53)
    I have Mackeeper installed and according to the scans I have run, everything is fine. No virus, no junk files . . . no problems at all . . .
    Except that for all practical purposes, my computer isn't working. 
    I am nearly totally deaf and live in an isolated, rural area of NW Missouri and this computer is what I mainly rely on to contact friends, relatives and business associtates!
    Any and all suggestions will be greatly appreciated!

    First, back up all data immediately, as your boot drive may be failing.
    If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
    If iCloud is enabled, disable it.
    Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Step 2
    You must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

  • I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. HELP!!

    I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. All I want to do is put my music from itunes on my computer to my new phone. HELP please!!

    i called apple and they are sending me snow leopard so i should, *fingers crossed, be able to run the newer version of itunes. we'll find out for sure in a few days when it arrives

  • Dropped my Ipod, I have put it in Disk Mode, I have downloaded the new software, tried to restore it and it has seized please help?

    I dropped my Ipod (4TH Generation Ipod Nano) I have got it start up again I have put it in disk mode and connected it to Itunes,
    I have downloaded the new software through Itunes, that went well, it came up as normal.
    I have got it to restore to factory settings. (Although before hand it synced and all that)
    During this process it has seized and not done what it was suppose to, only displaying the Apple Symbol.
    I disconnected, and it has gone flat and now is telling me to connect it to power, when I do so nothing happens.
    It won't connect to itunes.
    Please help.
    MJ

    Hello there pipem90,
    Heres an article about that very issue. Check out this article named iPod not recognized in 'My Computer' and in iTunes for Windows found here http://support.apple.com/kb/ts1369.
    There is more to the article but start here:
    1. Start with the iPod Troubleshooting Assistant
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant which applies to your iPod; this will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
    All the very best,
    Sterling

  • My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

    My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

    One of the memory cards was indeed faulty, and the other completely fine
    Thanks very much for all your help!
    Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from  system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
    However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
    Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having

  • My iMac has decided it will no longer find my hp air printer?

    MY iMac has decided that it no longer wants to find my HP air printer have tried to search for it manually but nothing is found, ipad and iPhone both connect with it straight away no problems printing from these devices just the iMac any help would be appreciated

    Restart your router as well as your Mac and printer.
    If that doesn't help, try wireless diagnostics.
    Instructions >  Wi-Fi: How to troubleshoot Wi-Fi connectivity

  • My iMac has a blank screen with an icon showing a flashing question mark.  I have rebooted and still nothing but that on the screen.

    My iMac has a blank screen showing an icon with a blinking question mark.  I have rebooted and still the same.  Any ideas?

    Mac OS X: Gray screen appears during startup  BTW, iOS info is useless, post machine and OS version specifics.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Imac has crashed..need new hard drive....had external drive connected...was using time machine.....so...itunes file should be on external drive....how do i import them to my new mac mini?

    my iMac has crashed...was told I need a new hard drive.....meantime I bought a mac mini.....I had an external drive connected to the mac....and was using time machine for backups....so....how do i move itunes music files to my new mac mini from the external drive?

    Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
    Inside the snapshot folder is a folder hierarchy like the one on the source volume. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the access list. Give yourself read access if you don't already have it. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
    Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
    When you're done, turn TM back ON and close its preference pane.

  • I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice.

    I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice. The hard drive is set set not to go to sleep.

    Were you not plugged in via USB to begin with?
    I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/HT1379

Maybe you are looking for

  • How to get value from a checkbox in a jsp page?

    hi there i have a form in a jsp which contains a <input type='checkbox' name='xx'> when i submit the form, how can i get the value for this checkbox? i could use request object to get parameter. i tried the following and could not get any value: requ

  • While using Build App installer, how does one include drivers for hardware

    I have a LabView vi and I would like to create an application to be installed on a different computer that also requires a PCI-6503 digital IO card for the purpose. While using Build Application to create the installer, is there a way I can include t

  • File system in Busy or in use?

    Folks, We have 6500 series switches in our network and often get this message when trying to upgrade. "file system in use" or "file system in busy" I forget what the exact message is, but it is one of these. Would someone know under what circumstance

  • SAP Basis Question

    What do I have to do become a Basis Admin? I do have some R/3 and networking knowledge. Where can I get the syllabus and certification numbers? Thanks in advance. Regards, Kumar.

  • Starting Windows program from APEX

    Is it possible to start a Windows program lets say from a button in an Oracle Application. If so any suggests would be great