My 1820 went mute! Please help! :)

Hi there! I already sent mail to the support, but they haven't answered yet and since I produce semi-professionally I kinda need this fixed asap, (eventhou thou the card is only in use at my homecomp.)
Anyhow, let's get down to it. Few days ago, I installed an internal PATA HDD, which wasn't a big deal, just few bolts... I don't really think this even had anything to do with it, but I just realized the problem afterwards: no sound output what so ever. The dps patchmix clearly shows the incoming signal and everythings seems to be fine, but I just can't hear anything. The leds are ok in the dock, and when I deliberately clipped my mic, the clip-led lit just fine. I even restarted my comp without the new hdd and cd-rom incase I ran out of power. This didn't help at all. I got monitors hooked to the dock, and a headphones but they are both mute. I've only received one error message so far, when I turned on logic 5.1.1 I got an error saying "can't synchronize midi with the external device", or something similar. I'm a bit scared that the problem is in the hardware but I can't figure out a way to test it for sure...
any help would be really, really appreciated...
Sincerely,
Timo,
(Syna a.k.a Deck Jagger)

I re-installed the entire windows and now it works! Still no idea what was wrong there...

Similar Messages

  • How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

    how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
    Iam new to coding. please help me.

    try the solution posted by kunu here and report back
    https://discussions.apple.com/thread/5105056?tstart=0

  • After EFI Firmware update 2.3, MBP Early 2011 will not boot. During restart it all went wrong please help!

    Hello,
    I've done an ample amount of Internet research to find an answer to this problem however nothing yet found is quite like this. I will start from the beginning.
    I am traveling through Europe, and I normally live in California. When I arrived in Ireland my MBP early 2011 15 inch, began crashing constantly when I had several tabs open on Chrome and maybe one or two low CPU/Memory using applications, nothing the 8gb RAM &750gb hard drive can't normally handle. Thus I began trouble shooting.  I ran disk utility once started up and repaired both disk and permissions. Still crashing. It didn't seem like it had anything to do with a kernel panic shut down, I never would receive the usual message indicating so. After that I did an SMC reset. It was still crashing. I then upgraded the OSX from 10.8 to 10.8.4 believing it could help. It did momentarily, but then crash again. (When it crashes screen goes black suddenly and upon pressing power button does a regular boot on my single partition). I decided attempting to repair using the Internet recovery option but it appeared my MBP had not yet have it installed, so I downloaded from Apple and began installing. Here I made a mistake, I unplugged the power source as it was restarting. When the gray screen and apple appeared, the loading bar shows up as it says it will when installing the update, but when the bar fully loads it crashes every time. I've tried starting in safe mode, which then loads but never goes further (I let it stand for two hours such as that and nothing). Then I decided to allow the MBP to fully charge overnight to give it time and charge. This morning the problem has stayed the same, even with power source plugged in. Please help I need this to work.
    Thank you and please ask any questions!

    Your constant crashing problem is probably some type of hardware fault which no update can fix. Doing the 10.8.4 update and then the firmware update just caused further problems. you need to take thr system to a apple store to be diagnosed and fixed if cost effective.

  • Red Media suddenly went offline - Please Help!

    Hello,
    I am aware that this is a reccurent problem. I remember seeing a similar post last week but for some reasons I can't find it anymore.
    Here is my situation.
    After months of endless editing of a feature film, I am about to export the final cut and send the project out for DI and VFX.
    Today I opened PPCS6 and part of my timeline is offline.
    Of course I tried to relink the media, but all I get is an error message saying "Unsupported File / File damaged".
    This was an ongoing problem at the times of CS5-5.5,when I was spending weeks trying to understand the origin of this problem. Now it appears that CS6 is having the same kind of issues with RED media (or simply with the red importer).
    Here is what happens in details:
    When I relink the original r3d files I don't always get the "unsupported file" error. Long clips with more than one segment can be relinked with a little trick.
    To give an example:
    In the case of long clips, when Premiere asks "Where is A002_C001_100742_001?" if I select the first segment of the file (001) I get the "unsupported file" error.
    Although if I select the second or third segment, like  A002_C001_100742_002 or  A002_C001_100742_003 the clip gets re-linked without problems. This makes me feel there is something wrong in the way Premiere imports RED media.
    Although the real probelm is when I have short clips, where the camera only generated on r3d file/segment. In that case I get the error of unsupported format, and the clip stays offline. I can't think of a workaround for short clips.
    I have the latest CS6.02 version.
    This is driving me crazy, and right now 1/4 of my timeline is offline.
    Please, if anyone experienced this problem and has a possible solution let me know. I need to export this project and I am currently stuck with no possible solution.
    THANKS!

    I tried, but Clearing the cashe/cashe database made it even worst, more clips went offline.
    Today I uninstalled the software and reinstalled it, now everything is back to normal.
    Problem is that it happens very often, not only to me.
    It would be great to understand if there is a better solution. Uninstalling the software in the middle of a job made me feel a bit uneasy.

  • Something went wrong PLEASE HELP ME!!!!!!

    Yesterday my ipod 30 gig video was working great then today and came and it says when i connect my ipod to my computer it says it itunes that the ipod is corrupted and i need to either re - connect it or restore it so i tried both and then when it was done restoring it says when i plug it in again it still says corrupted ipod. either email me at
    E-mail: [email protected]

    Hello mammac,
    Welcome to the HP Forums!
    To start off, I have included the document 'Improving System Performance without Adding Memory (Windows 8)'. This should help with improving the speed of your computer, with making sure all updates are done, and unnecessary start up programs disabled.
    I have also included the document 'Windows 8 Stops Responding or Becomes Very Slow After Connecting to the Internet'. To hopefully help with the speed of the internet, when playing your online games.
    To try, and reinstall the 'accelerator', I have included the document 'Using Recovery Manager to Restore Software and Drivers (Windows 8)'. Please follow through the steps for reinstalling software.
    To be able to provide more specific troubleshooting steps, could you please provide me with the full model number of your HP 2000 notebook. If you need it, I have included the document 'Guide to finding your product number'.
    Thank you.
    I worked on behalf of HP

  • My ipod touch microphone is not working ,i restore new os but still in mute ,please help

    my ipod touch microphone is not working ,i restore new os but still in mute ,
    and suddenly it  gets shut down.
    please help

    Try here:
    iPod touch: Hardware troubleshooting
    You can make an appointment at the Genius Br of an Apple store and hear what they have to say.

  • IBook went crazy - please help!

    Hey,
    I was just downstairs surfing the 'net when all of a sudden my iBook went flooey. The screen went black, and then red, green, white, blue (I'm not sure of the exact order of colors). I tried holding down the power button to force it to restart, but that didn't work. I had to unplug it and take the battery out to get it to stop. When I tried restarting, I got the same funky screens. Oh, and now the fan is going like crazy.
    What happened??
    I have AppleCare, but I'm still hoping this something I can fix myself with appropriate software. I hate parting with my iBook while it's getting fixed!
    Thanks in advance!
    ETA: I just realized that the iBook wasn't shut down despite me taking the battery out and putting it back in. So I took it out and the fan has stopped.
    Message was edited by: Kittenmommy

    spudnuty wrote:
    Kitty..,
    The PC hates me and I think it secretly plots ways to drive me to suicide.
    Yes, I work on a lot of PCs and my oft used expression is:
    "You've got to be ....ing kidding me!"
    Inorite? I downloaded Safari for the PC but it still really *****. I can't wait for Apple to get my iBook back in action!

  • Media browser in garage band went black please help me

    Hi after doing an update my garage band media browser is black, can you help me....

    Hi, no need to do a second post (it can actually make things confusing).
    If you want you can reply to yourself and just write "bump" or something to move the question back up to the top.
    Sometimes it takes a while for someone who might have an answer to come by.
    So, after all that, I'm sorry, but I don't have an answer for you.
    Maybe if you provided more details someone may have a clue. Like what did you update from and to? A system update, a GarageBand update, both?

  • HT1386 I am having problems downloading my music from my PC to my iphone 5s. I have i-tunes on my PC which I also have a different apple ID than what is on my iphone. I tried once to sync and download but do not know where it went. Please help

    I am having problems downloading my music library from my PC to my iphone. I have different apple id's for i-tunes and iphone5s. I did connect iphone to PC via USB and was able to sync and download, but do not know where it downloaded to. I looked under my music on iphone and nothing there.

    You have Sync Music selected under the Music tab or selection for your iPhone sync preferences with iTunes on your PC?

  • My itunes library went nuts. please help

    I noticed today, that some of my compilations started showing up in the wrong parts of my cover flow. Before they would all sit nicely towards the end, then I saw that two of them where now mixed in with the V's, listed under various artist. Weird. I manually fix those two artist, and they seemed to go back to where they belonged, by editing the ID3 tags myself, even though those albums I purchased on itunes.
    Then I noticed another soundtrack (compilation) was listed in another part of the coverflow, this time in the O's, and now I'm thinking my library somehow got messed up.
    I rebooted a couple of times, and now when I view my itunes library, it list the artist as if Group by Compilations isn't checked. So now my soundtracks show up several times, mixed in with regular artist. I keep checking, and unchecking, and rechecking group compilations in the preferences, but it just doesn't work. The songs are still marked as part of a compilation.
    This is really irritating me! Anyone have any ideas?

    I must be really really tired.
    I turned off the Album by Artist tab.... and there it is.
    Problems solved. I'm going to bed now, apparently I need sleep.

  • My account went haywire, please help!

    Today I booted up OS X (on my MacBook) and it looks like it did when I first bought it. The dock has all the icons it did when I first got it. All my settings and changes are gone, iTunes is empty, documents are empty, my links in safari are gone, it's like a new computer.
    The only explanation I can think of is that yesterday I was fooling around and in the finder I renamed the little house icon from "thansenapple" (what it always has been) to "Trent" (my own name). I renamed it by 'rightclicking' the text and chosing rename form the little menu.
    Nothing happened at that moment, but when I was using Word later that night, it wouldn't look into my regular document file, it would instead look in a document file that was all blank, and I had to do some searching to find the file I wanted.
    Well today I booted up and I got a new computer or something. After some more searching, I found that all my files are still there, they are under USERS. There are 3 files under the Users file: shared, thansenapple, and Trent. Also, right now my little house icon in the finder does not read "Trent" it reads "thansenapple".
    I'm scared and confused. Did I just screw myself or is there an easy fix?

    See Recover from renaming your Home folder.

  • Hi i have asked for this help before and it was fixed but cant remember how to do it My ipad has lost sound in certain apps and general typing i remember fixing it through the settings can any one please help it not the mute

    Hi I have had this problem before butr cant remember how to fix it . What has happened is certain apps have no sound where as others do I also have no sound when typing.I remember when i last asked for help with this problem it was done through settings. It not on mute Please help me.

    You can enable keyboard sounds via Settings > General > Sounds . If they are enabled but you can't hear them then have you checked that you haven't got notifications muted (which will also affect most apps) ?
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • PLEASE HELP I LOST 10 000+ SONGS!!!!

    i just posted in another thread sorry i couldnt start a new one a second ago. anyway...
    my computer froze up & went styupid about 1/2 hr ago & when i restarted my ipod has been wiped!!! ive lost 10 000 songs! please tell me i can get them back!
    ive tried restarting the ipod with select/menu button, didnt do anything. whenn use the ipod itself it says i have no songs or videos but my photos have stayed on there. also when i try to restore it on the computer it says i have 10Gb left which leads me to believe the songs are still on there & something just went wrong. please help it will take me years to get all these songs some were from very rare albums.

    Most of your sources are illegal; friends, LimeWire, etc... Anyhow, try first updating your iPod's firmware; iPod Updater - Version 1.1.1. If that doesn't work, restore your iPod with that same updater. Restoring your iPod will erase all the files on your iPod. You'll have to put all the files on your iPod back on your computer. Check out the following programs...
    PodUtil
    YamiPod
    Both will rip files from your iPod, and place them in a specified folder on your computer.

  • TS1389 im trying to sync my ipod and everything went well but when i tried to get all my songs back off my laptop it wont let me it tells me to authorize my computer but then it doesnt give me that option im in despret need of help someone please help.

    okay so my cousin downloaded a bunch of songs to my ipod and i couldnt listen to them so i decided to sync my ipod, i thought everything went well but i guess i was wrong because i saved all my apps to my laptop and my music also. but now i cant get any of it back on my ipod it says i have to authorize my computer so when i go to itunes and attempt to authorize my laptop it doesnt give me that option ive tried everything someone please help thanks...

    Open itunes, Click the word Store at the top of your computer screen
    On a windows computer, if it does not show, then click Alt-S

  • I am using an iphone 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.

    HEY GUYS I AM USING AN IPHONE  3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
    AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
    PLEASE HELP ME.

    This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.

Maybe you are looking for

  • Is there a way to avoid transparency artifacts on pdf files

    Hey everyone I'm running into a bit of a problem with indesign, I'm designing a digital magazine and I'm wanting to combine imported photos with vector shapes created in indesign, I'm using one of the vector shapes and overlaying it on a segment of a

  • Apple cinema display connection with mini mac

    I have an Apple cinema display (http://www.everymac.com/monitors/apple/studio_cinema/specs/apple_cinema_display_ 30.html) and i bought a new mini mac, how i can connect them? what i need? thank you all

  • Issue with materialized view and fast refresh between Oracle 10g and 11g

    Hi all, I've hit a problem when trying to create a fast-refreshable materialized view. I've got two databases, one 10.2.0.10, another 11.2.0.1.0, running on 32-bit Windows. Both are enterprise edition, and I'm trying to pull data from the 10g one int

  • MUSE not responding after short idle time

    I am using Muse 2014.2 with Windows 7 64bit (and I love MUSE, thanks Adobe for a great program [snivel, snivel]). I am finding that MUSE freezes and become unresponsive after three or four minutes away e.g. while I go off to Illustrator / Photoshop a

  • How to install Firefox branded using the AUR[SOLVED]

    Hello I want to install firefox from the AUR, here was the link provided to me http://aur.archlinux.org/packages.php?ID=18019 Help me plz...Thanks Last edited by kaola_linux (2008-10-10 02:14:18)