My 1st Apple, Mac Pro. How do I connect an Epson XP-610 Printer?

So, I just got the computer... Always had PCs before. My problem is this:
I need to use a printer with the device. I bought an Epson XP-610. There is almost no documentation with the printer. (Maybe, on line there is)
I got the printer out of the box, set it up, even managed a test print from the printer, but not from the Mac. I searched the help directory, found a referenct to choosing the Apple Menu, then Software Update, to make sure the OS X has the latest info about the printer software that can be downloaded from Apple.It went on to tell me to open a doc there called file >prin t...then open the printer popup menu choose my printer (Epson XP-610). It said that, if the printer is not in the list, to choose Add Printer from the printer popup menu. Then when the printer shows up, to click it and add it.
My problem is that I don't know how to find the Apple Menu to start out.
Any help will be much appreciated.

Apple menu is the small Apple icon at the upper left hand corner of your screen - it's always there.
Here -> http://support.apple.com/kb/PH11145?viewlocale=en_US - is a document that explains how to set up a printer (don't worry that it says Mountain Lion, the procedure is the same).
Good luck with your new Mac - feel free to jump in with questions at any time.
Clinton

Similar Messages

I use my own color profiles from Photoshop CS6/Mac Pro - how do I turn of Epson Artisan 837 printer color management?

I use my own color profiles from Photoshop CS6/Mac Pro - how do I turn of Epson Artisan 837 printer color management?

Choose Photoshop Manages Color in the CS6 print dialogue. At the top, click the Print Settings button and disable any color management settings for the printer.
Edit: Correction, that's CS6 in Snow Leopard. In Mountain Lion, if you check the print settings, color management for the printer should automatically be disabled when using Photoshop Manages Color.

I have an iPod which i currently sync on my iMac, I want to sync it on my Apple mac pro, how do I do this? Is there a way of doing this without restoring my iPod?

I have an iPod which I currently sync on my iMac, but I want to sync it on my Apple mac pro, how do I do this? Is there a way of doing it without restoring my iPod?

Post here:
https://discussions.apple.com/community/ipod

How do I connect my Epson XP-205 printer to my wifi network when using an Apple Time Capsule as a router?

Printer is updated with latest firmware and I have downloaded the latest installation sw from Epson. Configuration is done from my Mac Book pro running Mountain Lion.
The network is set up using WPA2/AES.
I have tried configuration using WIFI as well as through USB.
Is there a way to reset the printer to factory settings?
Any help appreciated

Is there a way to reset the printer to factory settings?
It's always possible that another user on an Apple support site might know the answer to this Epson question.....and you can wait to see if someone will reply......but, since you have a question about an Epson product, you will likely receive a much faster and informed answer if you ask your question on an Epson support site. The link is below:
Epson America, Inc. - Support: Contacts - EPSON

How/Can I install WINDOWS 7 64BIT on a 1st Generation Mac Pro ?

Hi, Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz? Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all te installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
When I try installing 64 bits, I never get past the "select cd rom 1or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
Problem is it's all Windows based with exe files and presupposes I already have Windows running.
I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows users successfully installing Windows 7 on a 1st Generation Mac Pro.
Thanks.

I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
1. Update Snow Leopard
2. Place the Windows cd in the Super Drive
3. Shut down the computer
4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
5. Boot the computer holding down the Option key
6. Boot to the Windows cd
7. Install Windows and format the drive to NTFS
8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
9. After Windows installs, place your Snow Leopard disc in the Super Drive
10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
11. Go to Start > All Programs > Apple Software Update
12. Update again until it's done.
13. You'll also find a BootCamp under Control Panel, check it out.
14. Shut down the computer and replace the hard drives in their original order
14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

How can I install Windows7 -64BIT on a 1st Generation Mac Pro 2.66GHZ Quad?

Hi,
I posted this in Bootcamp but haven't received any replies so I am reposting it here where perhaps it really belongs.Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz?
Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all the installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
When I try installing 64 bits, I never get past the "select cd rom 1 or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
Problem is it's all Windows based with exe files and presupposes I already have Windows running.
I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows 7 users successfully installing Windows 7 on a 1st Generation Mac Pro.
Thanks.
Mac Pro 2.66GHZ Quad Core

I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
1. Update Snow Leopard
2. Place the Windows cd in the Super Drive
3. Shut down the computer
4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
5. Boot the computer holding down the Option key
6. Boot to the Windows cd
7. Install Windows and format the drive to NTFS
8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
9. After Windows installs, place your Snow Leopard disc in the Super Drive
10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
11. Go to Start > All Programs > Apple Software Update
12. Update again until it's done.
13. You'll also find a BootCamp under Control Panel, check it out.
14. Shut down the computer and replace the hard drives in their original order
14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
Reset the PRAM and the SMC, which might contain personal information.
If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
If you activated FileVault in OS X 10.7 or later, turn it off.
If you use Boot Camp, the partition must be deleted
If you created any other data partitions on the internal drive, remove them in Disk Utility.
Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer with the machine.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

How do I clean apple mac pro of junk?

Hi
I have an Apple Mac Pro operating on Mac OS X Version 10.7.5. I participated in a few surveys a while back and now my mac is overrun with ads and requests that stop me from viewing whatever internet browser I use.
How do I safely clean my Mac of all this junk?
Thanks
Dave

Click here and follow the instructions, or if desired, run Adware Medic; the second link is a direct download.
(115556)

1st Gen Mac Pro: Graphics Card Needed Urgently

My mac pro is first generation (Model Identifier: MacPro1,1) Not the 2008 Mac Pro.
I have Chipset Model: ATY,RadeonX1900
This card is failing. Pram reset, SMC reset, and/or repair permissions do not work. I cleaned the fan intake area as well... card is still failing (won't wake from sleep, no display on reboot, etc etc).
I have searched these forums high and low. Can anyone please provide me with a good option for a replacement card?
The closest I have gotten is the "Apple nVIDIA GeForce 8800 GT Graphics Upgrade Kit for 1st Generation Mac Pro" which is now discontinued (?)
I am getting really frustrated here, please help!

Hey,
I am having the exact issue with my Mac Pro (2.66 gig first gen intel). I have a discussion (unresolved) that you can find here.
http://discussions.apple.com/message.jspa?messageID=9666490#9666490
I wonder how many folks are having this particular card die early on them. I think the problem is more widespread than Apple would indicate on the phone.
Anyway, my concern is whether or not the replacement card will be able to use the Open CL (sp?) protocol that will come with Snow Leopard. This will allow the computer to use free cycles on the graphics card to boost processing power. The guy on the phone and at the Apple store I went to was fuzzy on this. The last thing I want to do is upgrade to an antiquated card.
He suggested the Nvidia GeForce 8800 GT which I cannot find (discontinued).
Does anyone know if the 4870 will take advantage of the new Snow Leopard features?
Thanks,
G

8800 GT crapped out, 1st-gen Mac Pro

When I tried to turn on Mac Pro today, the monitor didn't appear to be receiving any video, and the fan on my GPU was at full speed without stopping. The computer otherwise seemed to be working fine (startup sound played, could hear hard drives working). I ruled out the monitor as the issue, and upon replacing the Nvidia GeForce 8800 GT with an old ATI X1900 XT I had lying around, the computer started working fine. The ATI was the original card that came with the Mac, which I replaced with the Nvidia about 3 years ago.
The problem now is that I need a replacement for the 8800GT. Unfortunately, I have a first-gen Mac Pro (2006) and my warranty ran out, so a free repair is not likely. I called the local Apple store, who forwarded me to Apple support, who told me that Apple doesn't have any 1st-gen Mac Pro compatible 8800s lying around. They suggested I check Newegg, but after some time trying to struggle through the site I don't believe they have any either.
So, I guess my question is, what now? My Mac functions fine with the X1900XT, but the reason the card was replaced was because it performed terribly, overheated often, and had artifact issues, so I'd rather not keep it.
This is my first experience trying to replace hardware out of warranty, and coming from PCs it's hard to imagine there are no replacements out there. Do I have to live with the ATI, or does anyone know if/where I can find a replacement 8800?
I have a MacPro1,1, dual Intel Xeon 2.66GHz, 4GB RAM, latest version of Mac OS X.

BTW, 9.5 Minutes in a 425F oven has about 50/50 odds of reviving your 8800GT. You need to remove fan first. There are multiple "how tos" on web. I have done this with MANY 8800GTs and can report odds really are about 50% that card can resume normal life.
Issue was early Lead Free solder.

1st gen Mac Pro has gone... dark?

I have a 1st generation Mac Pro, 2.66 x 2, with NVIDIA 7x00 (GeForce GT? can't remember which and the card has absolutely no part number I can find that is searchable on the NVIDIA site, or intelligible to the human mind). The Mac Pro locked up when I was syncing my iPad (I love that thing!) and I thought, no big deal I'll just turn it off and turn it back. It's frozen up on me about 10 times since I bought it in 2006. It's been a stellar - and stable - piece of machinery. Anyway, no dice on restart. The screen is dark and says No Signal. No signal? How can that be?
At first I thought it was the power supply, but then I knew it wasn't - the fans start up, the drive spins up, the little red lights are lit on the motherboard. I've taken all the drives out and reseated them, taken out the video card and reseated it, unplugged everything from the computer and let it sit,and then just plugged in the power cord and keyboard and mouse. Still no go. I thought about beating it with a bat but thought that might be counterproductive.
I'm hoping it's not the graphics card. Is there a way to check anything else to verify that before I spend the bucks? And if I do have to get a new one, could someone recommend a decent replacement?
Thanks in advance for any help or direction,
Rube

Okay, so I guess the CPUA and CPUB have to do with ram memory. I have reseated all memory - no change. I have reinstalled the original Apple memory config (512 x 4) - no change. I have reset the SMC - no change.
Well, whatever it turns out to be, this will the first of my Macs to go down hard. All my other macs (SE, Centris 650, 9500, G4) have always worked fine and still work. I hope I can figure this out.

Confused about upgrading Video card on 1st Gen Mac Pro

When looking in the Apple store under video cards it looks like the 8800 or even the ati 2600xt say :
PCI Express 2.0 but under the reviews for the ati card there are a few posts that say they used this card to upgrade their '06 ' and '07 Mac Pro from the Nvidia 7300 ...
But if the older Mac Pro's dont have pci express 2.0 how can this be ?
I also have read that a nvidia 8800 for the 1st gen mac pro may come out but what if it does not ? Whats the deal ? Will there be a video upgrade path for the 1st gen mac pro or not ?
Why are we being " left out " in the cold for buying a machine a year and a half ago ?
So basically there is the 7300 or the ati 1900 and thats it for the 1st gen mac pro's ?
Even my 4 year old PC has video options and its agp !

If you are bored you might be able to find an early post of mine from the early MacPro days when I commented that MacPro buyers should only buy if they can live with never being to upgrade the graphics card. Apple is Apple and if you know the history of Apple you know that graphics cards are all but ignored. I remain hopeful that Apple, through nVidia, comes out with an 8800 for older Mac Pros, but I don't count on it. The MacPro line has glaring strengths and glaring weaknesses and the dearth of video cards is a glaring weakness. Still better a MacPro with this weakness than a PC box, but with no official word from Apple and all this expectation from a single comment by an nVidia PR person (PR for gosh sakes!), I don't find the rumor to be terribly credible. Hope I'm wrong. Very much so. Hope the oft quoted email by steve j. regarding it being looked at is on the money and we have an announcement tomorrow. Holding my breath till then....

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion?

I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion? On the Apple's site on upgrading (http://www.apple.com/osx/how-to-upgrade/), I see that "Mac Pro (Early 2008 or newer)" is required for the upgrade. What's up with that?
Will upgrading of the GPU do the trick?
I'm curretly on Snow Leopard, will I be limited to Lion?
Kamal
my system info:
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          13 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Serial Number (system): xxxxxxxxxxxxxxxxxxxxxx
Hardware UUID:          00000000-0000-1000-8000-00xxxxxxxx
ATI Radeon X1900 XT:
Chipset Model:          ATY,RadeonX1900
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          ATI (0x1002)
Device ID:          0x7249
Revision ID:          0x0000
ROM Revision:          113-A52027-140
EFI Driver Version:          01.00.140

I have the following Mac Pro which I have upgraded the GPU to an ATI Radeon HD 5770:
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          3 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          8 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Serial Number (system):          G86334VTUPZ
Hardware UUID:          00000000-0000-1000-8000-0017F20153D2
Mountain Lion won't install.
Will this change or do I need to further upgrade the GPU.
Thanks In Advance!
--Dave K.

We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?

If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

My 1st Apple, Mac Pro. How do I connect an Epson XP-610 Printer?

Similar Messages

Maybe you are looking for