My 2 cents on CS5.5
Hi all,
I'm new to this forum, but would describe myself as a very experienced user of Adobe Audition 1.5. I have recorded hundreds of sessions on it and have always thought it a wonderfully intuitive and simple interface for recording.
I've recently upgraded to CS5.5 and, with all respect to the developers, I must say I'm quite disappointed at a few major ommisions.
Firstly, what recording interface doesn't have a metronome?! This is a grave absence. Nearly every musician I work with will want a metronome track on at least a few of the songs they're recording.
Secondly, the looping functions are far less sophisticated in the new version. Clip duplicate is gone (a very handy function if you want to loop a sound that you've cut in the multitrack window that belongs to a longer series of sounds). But the actual looping function has lost its various stretching capabilities making it far harder to do sequencing work within the session window. This was a major tool for me in my sessions when building up arrangements around bands who have played to a metronome.
Thirdly, I'm really quite frustrated that I can't open older sessions with the new software. I had this same problem with AA3.0. Why can't you include a compatibility mode so I don't have to have three different versions of the one program on my machine? Seems pretty ridiculous to me, considering most software packages these days include compatibility functions. I think you should be showing some support to the people who have bought your older software and wish to have access to older sessions.
I've only recorded one session so far so need to dip my toes in a bit further, but if I can't find some solid work arounds I'm going to have to look into another interface.
cheers,
Adam
Welcome to the forum Adam,
You are not alone in having some angst with CS5.5 but pretty much all of this has been covered by the developers elsewhere in the forum.
That of course doesn't make the pain go away.
However, the points I'd like to address are:-
"Clip duplicate is gone"
That is not so it is still there it's just more flexible and accessed in other ways eg highlight a section of a clip and hold down the alt key while clicking on the top of the clip and you can drag a new instance of the clip. (sounds harder than it is).
"I'm really quite frustrated that I can't open older sessions with the new software. I had this same problem with AA3.0."
Again not so - AA3 can open all previous versions of ses files including CEP.
Additionally there is http://www.aatranslator.com.au/ses2sesx.html which should cover you here.
Be thankful you are not a Final Cut Pro X user where you pay twice the value of the upgrade just to export an OMF!
"so I don't have to have three different versions of the one program on my machine?"
Some users actually choose to do so and are relieved that Audition allows this rather than overwriting previous versions.
I used to love AA1.5 and resisted the urge to move to AA2 and then AA3 but I just couldn't live without xfades now. Sure it was a quantum leap in getting used to it but it was worth it. I suspect (and this is not directed at yourself) that CS5.5 compared to AA1.5 in many ways is a bit like giving a time machine to Java Man. By that I mean conceptually its hard but in reality its just a matter of a different approach (sure there is no getting around funtionality that you need that is yet to be implemented).
"I think you should be showing some support to the people who have bought your older software "
As a developer myself you have to consider the cost of supporting software that is what 10 years old?
If it was me and my customers either couldn't be bothered or didn't want to spend the upgrade money or even if they are happy with the old version there is a limit to catering for those customers as opposed to catering for the needs of those who continue to support your product by upgrading.
I guess a line has to be drawn somewhere especially when somethings don't necessarily have logical conversions into later versions.
"but if I can't find some solid work arounds I'm going to have to look into another interface."
And really this applies to every user of every daw - if the daw you are using doesn't do it for you then you need to find one that does.
I've been down that path also and while I'll use another daw to convert my midi drums when required I would rather dig my eye out with a spoon than use it over AA.
This is just my two bobs worth not that my two bobs worth is worth any more than anyone else's ;-)
Hang in there if you can.
Similar Messages
-
How do you select the center of a box in CS5?
I notice in CS5 that you can no longer select a box - say a picture box - click on the center and snap it to a guide or move to a location. You can only grab the edge of the box to move it. I'm sure this is a vast improvement but I don't like it. Is there a pref to turn on or off to be able to select an object at it's center? Thx.
Hmmm. ID doesn't put the old center dot in a frame anymore, at least not most of the time, but the center should still be snapping, regardless of where you grab the frame. I'm not seeing any necessity to grab the edge (though if you have the content grabber turned on it's not difficult to accidentally move the content instead of the frame). What are you seeing?
-
How to center web page made in indesign cs5
Hi everyone,
I'm new to this forum and I hope I'll get help, because I need it
I've made a web page in indesign cs5, exported in SWF and generated HTML.
My swf file looks good, but my html file is not centered, web page is positioned
in upper left corner, and I want it to be in the center.
How can I put it there?
Thnx very much!
HrestaI know ID is not the best option for a website, but I need it that way.
I know html/css, but my generated html file contains javascript which
I'm not familiar with :/
There's no div so I don't know where to put my auto margins?
Simply on top of the html file?
Thnx anyway!! -
I created a website layout template in Photoshop cs5 once i opened it into Dreamweaver i was trying to Align it to Center but it would not go center still stays to the left. I know that something is not right i am missing something and i am new to this not much experience with Dreamweaver, can someone please tell me how to fix this issue in a way a beginner would understand, i greatly appreciate the help.
Did you export HTML from PShop? Graphics apps generated code is not suitable for real web pages. It's really only acceptable for quick comps to show the client before you undertake the real work of building the layout in DW with HTML & CSS code.
To center pages, you need 3 basic things.
A valid doc type declaration on the first line of your code.
A stated width in px, % or ems.
A margin-left and margin-right of auto.
Copy & paste this code into a new, blank document in DW. Save and preview in browsers.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5, centered 1-col layout</title>
<style>
body {
margin:0;
padding:0;
background: #696;
font-family:Segoe, "Segoe UI", "DejaVu Sans", "Trebuchet MS", Verdana, sans-serif;
font-size: 100%;
#wrapper {
width:90%;
margin:0 auto; /**with width, this is centered on screen**/
padding:1%;
background: #FFF;
</style>
</head>
<body>
<div id="wrapper">
<h3>Heading 3</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
<h3>Heading 3</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
</div>
</body>
</html>
Nancy O. -
Why does the box have an "Only for distribution in Asia Pacific and Japan" sticker on the side if I purchased it from a distribution center in Utah? Can I still use it? What are the differences?
Would it be possible for you to post your solution to the problem here?
I am having the same problem with CS5.5
Thanks;
Zach -
Click to change rotational center broken in CS5?
In CS4, I could click anywhere inside a frame or shape to instantly change the center of rotation to the point where I clicked. Now it seems I must click the center point and drag it to where I want it. This is driving me CRAZY! Anyone got a workaround?
I'm working on a PC.Yep not working file a bug/feature request - the more the merrier
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
And if you hold down alt it will work - but you get a dialog box - cancel it or hit the ESC key. -
[none] on center of page when printing from CS5
All of the sudden a [none] is printing accross everything I print from CS5. There is no error message and the print goes through without a problem.
I can print from MS word and other programs without a problem. I'm printing to an HP3800 and my OS is Win7.
Any help would be appreciated!I did the ctrl-alt-shift pressed while starting photoshop. I also uninstalled the only plugin I had installed.
Below is the last bit of information from the Help -> System Info....
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Access CS Live
CS Review
CS News and Resources
Installed TWAIN devices: NONE
Guess it could be a font issue. What do you reccomend for font validation (OS win7)? Found this info on MS website. http://www.microsoft.com/typography/fontvalidator.mspx
NOTE: The proof I am currently trying to print is flat....
UPDATE: I am able to print the same document from CS6 on a mac without issue. -
How do you center an oval inside an oval CS5
I made an oval. Then I copies and pasted an oval. I selected the lower right had corner of the square around the oval. I drag the corner inward to keep it porportional (I hope this is correct) to the first oval. Now I want to center the smaller oval inside the larger oval. I want to have the distance the same all around the smaller oval. I then plan to type in the area between the two ovals.
thanks
MikeYou can also use a combination of SmartGuides and Rulers as well as default objects such as the Rectangle Tool which have Center Points to get the center once you apply the rulers using smart guides.
+ <----------------------------------------centerpoint of rectangle -
Pasting from illustrator to the center of Photoshop CS5.5
Hi, I have an illustrator file (various circles and half circles) built with various layers, I would like to copy and past these layers into photoshop and change them to a shape layer, but when copying each layer and pasting the vector falls in slightly different place to the illustrator file, how can I keep the postion the same as the illustrator?
thanksScripting might have provided a solution – but writing the Script might have taken more time than doing it like this.
So unless the task is a very frequent one for you it’s probably not worth the trouble. -
How to see html code in a php file using CS5.5 without using testing server?
In CS5.5 when I open a page with php extention, DW does not show any html code in design view without me having to set up a testing server. In DW 8 it would open the same files and show me the html in design view. I have no need to test php code, I just need to alter the html. Is there a setting I can change to enable this in CS5.5? Thanks.
Below is the code. I discovered that if I create a new php document not from
a template, then I can see the html elements in design view. If I create a
new page from a template and save it as html, design view still works, but
if I save a new page from template and save it as php, I only see symbols
for php and nothing else in design view.
Thanks for your help on this.
<!--
body
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to
zero padding and margin on lists. For consistency, you can either specify
the amounts you want here, or on the list items (LI, DT, DD) they contain.
Remember that what you do here will cascade to the .nav list unless you
write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where
margins can escape from their containing div. The remaining bottom margin
will hold it away from any elements that follow. */
padding-right: 15px;
padding-left: 15px; /* adding the padding to the sides of the elements
within the divs, instead of the divs themselves, gets rid of any box model
math. A nested div with side padding can also be used as an alternate
method. */
a img { /* this selector removes the default blue border displayed in some
browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including
the group of selectors that create the hover effect. ~~ */
a:link
a:visited
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard
navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~ This fixed width container surrounds all other divs ~~ */
.container
/* ~~ The header is not given a width. It will extend the full width of your
layout. It contains an image placeholder that should be replaced with your
own linked logo. ~~ */
.header
/* ~~ These are the columns for the layout. ~~
1) Padding is only placed on the top and/or bottom of the divs. The elements
within these divs have padding on their sides. This saves you from any "box
model math". Keep in mind, if you add any side padding or border to the div
itself, it will be added to the width you define to create the *total*
width. You may also choose to remove the padding on the element in the div
and place a second div within it with no width and the padding necessary for
your design.
2) No margin has been given to the columns since they are all floated. If
you must add margin, avoid placing it on the side you're floating toward
(for example: a right margin on a div set to float right). Many times,
padding can be used instead. For divs where this rule must be broken, you
should add a "display:inline" declaration to the div's rule to tame a bug
where some versions of Internet Explorer double the margin.
3) Since classes can be used multiple times in a document (and an element
can also have multiple classes applied), the columns have been assigned
class names instead of IDs. For example, two sidebar divs could be stacked
if necessary. These can very easily be changed to IDs if that's your
preference, as long as you'll only be using them once per document.
4) If you prefer your nav on the right instead of the left, simply float
these columns the opposite direction (all right instead of all left) and
they'll render in reverse order. There's no need to move the divs around in
the HTML source.
/* sidebar1 = left */
.sidebar1
.content
.sidebar2
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol
/* ~~ The navigation list styles (can be removed if you choose to use a
premade flyout menu like Spry) ~~ */
ul.nav {
list-style: none; /* this removes the list marker */
border-top: 1px solid #666; /* this creates the top border for the
links - all others are placed using a bottom border on the LI */
margin-bottom: 15px; /* this creates the space between the navigation on
the content below */
ul.nav li {
border-bottom: 1px solid #666; /* this creates the button separation */
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that
your links retain their button look even after being visited */
padding: 5px 5px 5px 15px;
display: block; /* this gives the anchor block properties so it fills
out the whole LI that contains it so that the entire area reacts to a mouse
click. */
width: 160px; /*this width makes the entire button clickable for IE6.
If you don't need to support IE6, it can be removed. Calculate the proper
width by subtracting the padding on this link from the width of your sidebar
container. */
text-decoration: none;
background: #C6D580;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the
background and text color for both mouse and keyboard navigators */
background: #ADB96E;
color: #FFF;
/* ~~ The footer styles ~~ */
.footer
/* ~~ Miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page.
The floated element must precede the element it should be next to on the
page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page.
The floated element must precede the element it should be next to on the
page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a
or empty div as the
final element following the last floated div (within the .container) if the
.footer is removed or taken out of the .container */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
TD.mincart {
font-size: 10px;
font-family : Verdana;
position:relative:
left: 10px;
top: -30px;
P.mincart {
font-size: 10px;
font-family : Verdana;position:relative:
left: 10px;
top: -30px;
#search
#minicartdiv
P.smaller{
text-align:center;
font-size: 12px;
position: relative;
top: 1px;
#tagline {
font-weight: bold;
color: #03F;
height: 18px;
width: 350px;
font-size: 18px;
position: relative;
left: 10px;
padding-bottom: 10px;
#contact {
font-size: 12px;
float: right;
height: 18px;
position: relative;
padding-right: 10px;
font-weight: bold;
font-family: "Courier New", Courier, monospace;
padding-top: 7px;
Call 541-424-5555 Mon-Fri 7am-4pm Pacific Time. Email:
[email protected]
Bluetooth and More! No Sales Tax!
body, this
is a test
[Home | index.php] - Store Policies - Products
- Search - Checkout
email: [email protected] Call
541-424-5555</p>
<!-- end .footer --></div>
<!-- end .container --></div>
SSL
COT("images/cot.gif", "SC2", "none");
</html -
Hi!
I just tried to update my Adobe Creative Suite to Adobe CC. I have a registered CS5.5 Master Collection from 2012 that I bought while studying (Students Edition).
On the Adobe Website I can choose the CC as a special offer and a price o 35,69€ per year. When my Serial is checked they say that I'm not allowed to use this special offer.
Does anybody know what's the problem? Can't I use the special offer with the old serial of a student's edition?
Thank's for your help!
Best!!!No. Student licenses cannot be used per the terms and conditions...
from: Terms and Conditions | Adobe
"Eligible customers may purchase an Adobe® Creative Cloud™ Complete Membership with annual commitment for a reduced price. Offer valid for purchases of an annual plan, which requires a 12-month contract. This offer is only available to customers who own a Creative Suite edition or individual product in one of the following versions (CS3.x, CS4, or CS5.x, or CS6), and who purchase directly from the Adobe Store or by calling a regional Adobe Call Center. This offer is not available to Education, OEM, or volume licensing customers." -
Is there a shortcut to center-align all items of a certain type only?
I know the title of this thread is poorly worded; I apologize. Let me try to explain.
I design transit schedules, which I create in InDesign using tables. These schedules list arrival times for bus stops, but when the bus does not stop at a particular stop, this is indicated by an em dash.
Example:
The times are left-aligned within the columns (they are aligned on the colon). However, the em dashes are center-aligned. Currently, the entire table is left-aligned by default, and I manually highlight and center-align the em dashes. When there are just a few em dashes or when the em dashes are all adjacent to each other, it's no big deal.
But I often have to work with schedules in which the em dashes are in every other row (like the top half in the example above) or scattered throughout the table, and in those cases, my very manual method is a real pain in the neck—I have to highlight and center each em dash individually.
What I would LOVE to find is a feature similar to the Find and Replace feature, in which I could essentially ask InDesign to Find all em dashes within the document and center align them only. I've searched for such a feature to no avail. Am I overlooking something, or is this just not possible in InDesign? And if it's not possible, can you think of a better and more efficient way of center-aligning the em dashes than my current method?
FYI, I'm still using InDesign CS3, though I hope to upgrade soon. If I learn that a Find and Align type of feature is available in CS5, well—that's just more motivation for me to upgrade ASAP!
Thanks for your help and input.It can be solved through find and change itself. I think the below image will clarify your requirement.
-
Swf previews in browser and doesn't work on server after upgrade from cs3 to cs5
I have upgraded from CS3 to CS5. My site uses a template created in dreamweaver 8. When I edit a page and embed a .swf file created in flash cs5, it doesn't work on my server, but works on my computer when I 'test in browser'. I have uploaded all the files in the 'scripts' directory. I am streaming video. I have tried using both actionscript 2.0 and 3.0 and streaming .flv and .f4v. None work.
I have a big site and do not wan't to redo my template unless I absolutely have to.
Here is the link:
http://retinavitreous.com/educationalvideo2010/clips/intro_eyesees.html
Here is the code on my page:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<!-- saved from url=(0014)about:internet -->
<html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/mainnopop.dwt" codeOutsideHTMLIsLocked="false" -->
<head>
<!-- InstanceBeginEditable name="doctitle" -->
<title>video vitrectomy for macular hole re-operation ilm peel</title>
<!-- InstanceEndEditable -->
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css">
td img {display: block;}body {
background-color: #0000FF;
margin-left: 0px;
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
a:link {
color: #FFFF00;
a:visited {
color: #00FFFF;
a:hover {
color: #FFFFFF;
a:active {
color: #99CC00;
#main {
position:absolute;
width:579px;
height:815px;
z-index:1;
left: 168px;
top: 96px;
#right {
position:absolute;
width:238px;
height:817px;
z-index:2;
left: 792px;
top: 98px;
</style>
<!--Fireworks 8 Dreamweaver 8 target. Created Tue May 26 14:59:01 GMT-0400 (Eastern Daylight Time) 2009-->
<script language="JavaScript1.2" type="text/javascript">
<!--
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
//-->
</script>
<!-- InstanceBeginEditable name="head" -->
<script src="../../Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<script src="../../Scripts/swfobject_modified.js" type="text/javascript"></script>
<!-- InstanceEndEditable -->
<link href="../../css/yellowblue.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
body,td,th {
color: #FFFBF0;
-->
</style></head>
<body bgcolor="#ffffff" onload="MM_preloadImages('../../Templates/tempanimation/temp_animation_r1_c1_f2.gif','../ ../Templates/tempanimation/tempanimation_r1_c1_f2.gif','../../Templates/tempanimation/temp _animation_r1_c2_f2.gif','../../Templates/tempanimation/tempanimation_r1_c2_f2.gif','../.. /Templates/tempanimation/temp_animation_r1_c4_f2.gif','../../Templates/tempanimation/tempa nimation_r1_c4_f2.gif','../../Templates/tempanimation/temp_animation_r1_c5_f2.gif','../../ Templates/tempanimation/tempanimation_r1_c5_f2.gif','../../Templates/tempanimation/temp_an imation_r1_c7_f2.gif','../../Templates/tempanimation/tempanimation_r1_c7_f2.gif','../../Te mplates/tempanimation/temp_animation_r1_c8_f2.gif','../../Templates/tempanimation/tempanim ation_r1_c8_f2.gif','../../Templates/tempanimation/temp_animation_r2_c6_f2.gif','../../Tem plates/tempanimation/tempanimation_r2_c6_f2.gif','../../Templates/tempanimation/temp_anima tion_r4_c1_f2.gif','../../Templates/tempanimation/tempanimation_r4_c1_f2.gif','../../Templ ates/tempanimation/temp_animation_r5_c1_f2.gif','../../Templates/tempanimation/tempanimati on_r5_c1_f2.gif','../../Templates/tempanimation/temp_animation_r6_c1_f2.gif','../../Templa tes/tempanimation/tempanimation_r6_c1_f2.gif','../../Templates/tempanimation/temp_animatio n_r7_c1_f2.gif','../../Templates/tempanimation/tempanimation_r7_c1_f2.gif','../../Template s/tempanimation/temp_animation_r8_c1_f2.gif','../../Templates/tempanimation/tempanimation_ r8_c1_f2.gif','../../Templates/tempanimation/temp_animation_r9_c1_f2.gif','../../Templates /tempanimation/tempanimation_r9_c1_f2.gif','../../Templates/tempanimation/temp_animation_r 11_c1_f2.gif','../../Templates/tempanimation/tempanimation_r11_c1_f2.gif')">
<table border="0" cellpadding="0" cellspacing="0" width="1440">
<!-- fwtable fwsrc="tempanimation.png" fwbase="tempanimation.gif" fwstyle="Dreamweaver" fwdocid = "41244840" fwnested="0" -->
<tr>
<td><img src="../../Templates/tempanimation/spacer.gif" width="99" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="68" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="14" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="85" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="121" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="114" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="160" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="163" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="616" height="1" border="0" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="1" border="0" alt="" /></td>
</tr>
<tr>
<td rowspan="2"><a href="../../index.php" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c1','','../../Templates/tempanimation/temp_an imation_r1_c1_f2.gif','tempanimation_r1_c1','','../../Templates/tempanimation/tempanimatio n_r1_c1_f2.gif',1)"><img name="tempanimation_r1_c1" src="../../Templates/tempanimation/tempanimation_r1_c1.gif" width="99" height="24" border="0" id="tempanimation_r1_c1" alt="" /></a></td>
<td rowspan="2" colspan="2"><a href="../../ouroffices/alloffices.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c2','','../../Templates/tempanimation/temp_an imation_r1_c2_f2.gif','tempanimation_r1_c2','','../../Templates/tempanimation/tempanimatio n_r1_c2_f2.gif',1)"><img name="tempanimation_r1_c2" src="../../Templates/tempanimation/tempanimation_r1_c2.gif" width="82" height="24" border="0" id="tempanimation_r1_c2" alt="" /></a></td>
<td rowspan="2"><a href="../../patientinfo/forms.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c4','','../../Templates/tempanimation/temp_an imation_r1_c4_f2.gif','tempanimation_r1_c4','','../../Templates/tempanimation/tempanimatio n_r1_c4_f2.gif',1)"><img name="tempanimation_r1_c4" src="../../Templates/tempanimation/tempanimation_r1_c4.gif" width="85" height="24" border="0" id="tempanimation_r1_c4" alt="" /></a></td>
<td rowspan="2"><a href="../../treatments/overviewtreatments.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c5','','../../Templates/tempanimation/temp_an imation_r1_c5_f2.gif','tempanimation_r1_c5','','../../Templates/tempanimation/tempanimatio n_r1_c5_f2.gif',1)"><img name="tempanimation_r1_c5" src="../../Templates/tempanimation/tempanimation_r1_c5.gif" width="121" height="24" border="0" id="tempanimation_r1_c5" alt="" /></a></td>
<td><img name="tempanimation_r1_c6" src="../../Templates/tempanimation/tempanimation_r1_c6.gif" width="114" height="1" border="0" id="tempanimation_r1_c6" alt="" /></td>
<td rowspan="2"><a href="../../video files/videostart.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c7','','../../Templates/tempanimation/temp_an imation_r1_c7_f2.gif','tempanimation_r1_c7','','../../Templates/tempanimation/tempanimatio n_r1_c7_f2.gif',1)"><img name="tempanimation_r1_c7" src="../../Templates/tempanimation/tempanimation_r1_c7.gif" width="160" height="24" border="0" id="tempanimation_r1_c7" alt="" /></a></td>
<td rowspan="2"><a href="../../flash/animations/overview_animations.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r1_c8','','../../Templates/tempanimation/temp_an imation_r1_c8_f2.gif','tempanimation_r1_c8','','../../Templates/tempanimation/tempanimatio n_r1_c8_f2.gif',1)"><img name="tempanimation_r1_c8" src="../../Templates/tempanimation/tempanimation_r1_c8.gif" width="163" height="24" border="0" id="tempanimation_r1_c8" alt="" /></a></td>
<td><img name="tempanimation_r1_c9" src="../../Templates/tempanimation/tempanimation_r1_c9.gif" width="616" height="1" border="0" id="tempanimation_r1_c9" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="1" border="0" alt="" /></td>
</tr>
<tr>
<td><a href="../../patientinfo/insurancepar.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r2_c6','','../../Templates/tempanimation/temp_an imation_r2_c6_f2.gif','tempanimation_r2_c6','','../../Templates/tempanimation/tempanimatio n_r2_c6_f2.gif',1)"><img name="tempanimation_r2_c6" src="../../Templates/tempanimation/tempanimation_r2_c6.gif" width="114" height="23" border="0" id="tempanimation_r2_c6" alt="" /></a></td>
<td><img name="tempanimation_r2_c9" src="../../Templates/tempanimation/tempanimation_r2_c9.gif" width="616" height="23" border="0" id="tempanimation_r2_c9" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="23" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="9"><img name="tempanimation_r3_c1" src="../../Templates/tempanimation/tempanimation_r3_c1.gif" width="1440" height="69" border="0" id="tempanimation_r3_c1" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="69" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../patientinfo/overview_patientinfo.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r4_c1','','../../Templates/tempanimation/temp_an imation_r4_c1_f2.gif','tempanimation_r4_c1','','../../Templates/tempanimation/tempanimatio n_r4_c1_f2.gif',1)"><img name="tempanimation_r4_c1" src="../../Templates/tempanimation/tempanimation_r4_c1.gif" width="167" height="30" border="0" id="tempanimation_r4_c1" alt="" /></a></td>
<td rowspan="9" colspan="7" ><div id="main"><!-- InstanceBeginEditable name="main" -->
<h2 align="center">How the Eye Sees Animation
</h2>
<p align="center">
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="874" height="520" id="FlashID" title="eye sees">
<param name="movie" value="eyeseesas2.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />
<!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
<param name="expressinstall" value="../../Scripts/expressInstall.swf" />
<!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
<!--[if !IE]>-->
<object type="application/x-shockwave-flash" data="eyeseesas2.swf" width="874" height="520">
<!--<![endif]-->
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />
<param name="expressinstall" value="../../Scripts/expressInstall.swf" />
<!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
</p>
<!-- InstanceEndEditable --></div>
<div id="right"><!-- InstanceBeginEditable name="right" -->
<p> </p>
<script type="text/javascript">
swfobject.registerObject("FlashID");
</script>
<!-- InstanceEndEditable --></div></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="30" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../diseases/overview_diseases.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r5_c1','','../../Templates/tempanimation/temp_an imation_r5_c1_f2.gif','tempanimation_r5_c1','','../../Templates/tempanimation/tempanimatio n_r5_c1_f2.gif',1)"><img name="tempanimation_r5_c1" src="../../Templates/tempanimation/tempanimation_r5_c1.gif" width="167" height="33" border="0" id="tempanimation_r5_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="33" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../refdoc/overview_refdoc.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r6_c1','','../../Templates/tempanimation/temp_an imation_r6_c1_f2.gif','tempanimation_r6_c1','','../../Templates/tempanimation/tempanimatio n_r6_c1_f2.gif',1)"><img name="tempanimation_r6_c1" src="../../Templates/tempanimation/tempanimation_r6_c1.gif" width="167" height="32" border="0" id="tempanimation_r6_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="32" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../ourdocs/alldocs.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r7_c1','','../../Templates/tempanimation/temp_an imation_r7_c1_f2.gif','tempanimation_r7_c1','','../../Templates/tempanimation/tempanimatio n_r7_c1_f2.gif',1)"><img name="tempanimation_r7_c1" src="../../Templates/tempanimation/tempanimation_r7_c1.gif" width="167" height="31" border="0" id="tempanimation_r7_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="31" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../ouroffices/alloffices.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r8_c1','','../../Templates/tempanimation/temp_an imation_r8_c1_f2.gif','tempanimation_r8_c1','','../../Templates/tempanimation/tempanimatio n_r8_c1_f2.gif',1)"><img name="tempanimation_r8_c1" src="../../Templates/tempanimation/tempanimation_r8_c1.gif" width="167" height="31" border="0" id="tempanimation_r8_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="31" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../contactus/contacthome.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r9_c1','','../../Templates/tempanimation/temp_an imation_r9_c1_f2.gif','tempanimation_r9_c1','','../../Templates/tempanimation/tempanimatio n_r9_c1_f2.gif',1)"><img name="tempanimation_r9_c1" src="../../Templates/tempanimation/tempanimation_r9_c1.gif" width="167" height="32" border="0" id="tempanimation_r9_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="32" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><img name="tempanimation_r10_c1" src="../../Templates/tempanimation/tempanimation_r10_c1.gif" width="167" height="13" border="0" id="tempanimation_r10_c1" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="13" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><a href="../../lowvision/lowvisionhome.html" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('tempanimation_r11_c1','','../../Templates/tempanimation/temp_a nimation_r11_c1_f2.gif','tempanimation_r11_c1','','../../Templates/tempanimation/tempanima tion_r11_c1_f2.gif',1)"><img name="tempanimation_r11_c1" src="../../Templates/tempanimation/tempanimation_r11_c1.gif" width="167" height="102" border="0" id="tempanimation_r11_c1" alt="" /></a></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="102" border="0" alt="" /></td>
</tr>
<tr>
<td colspan="2"><img name="tempanimation_r12_c1" src="../../Templates/tempanimation/tempanimation_r12_c1.gif" width="167" height="503" border="0" id="tempanimation_r12_c1" alt="" /></td>
<td><img src="../../Templates/tempanimation/spacer.gif" width="1" height="503" border="0" alt="" /></td>
</tr>
</table>
</body>
<!-- InstanceEnd --></html>It's not 100% clear from your post, but you should be aware that CS5 plugins should not work in CS5.5. Because of a CS5.5 bug, CS5 plugins will load in InDesign 7.5.0, but that is fixed in 7.5.1 so they will not load.
You should lean a bit harder on Virginia Systems. They should be able to tell you how to get them the stack trace from the crash which they should be able to look at and tell you which plugin (if any) is responsible for the crash. I could do it for Mac OS X but I don't know how under Windows. You could start by looking at the Event Viewer, though. That may have some helpful information about the crashes and the faulting module. -
CS5.5 Gripes/CS6 Wish List (from the perspective of an FCP switcher)
I have been a Final Cut Pro user for more than 10 years (starting with version 1.2 on a 500 MHz G4). Final Cut Pro X is a disaster, but that’s a well-covered topic for a different forum. After experimenting with Premiere Pro CS5.5 for a few months, I am ready to make the switch for all of my future projects.
I make a living editing video. I don’t, however, work for a big company, and I don’t have a lot of money to spend on third-party software or hardware. Much of my work is shot on DSLRs and delivered online. That may put me in the category of “pro-sumer” to some, but I wouldn’t be making the switch if I didn’t require a more professional alternative to FCPX to do my job.
I also don’t think “pro” has to be synonymous with clunky and ugly. (I’m looking at you, Avid.) When Final Cut was young, it was fun, intuitive, and sturdy. It became a robust, professional NLE over time. I think Premiere Pro is on that path now.
I like the look, the feel, and the functionality of CS5.5. It’s not quite Apple-slick, but it’s very much at home on a Mac. Overall, it’s an upgrade to FCP7 and a very strong alternative to FCPX. I have high hopes for CS6.
But this is not a comprehensive review. It is just a list of negatives: my gripes, wishes, and personal preferences. My list of positives would be much longer, but my concern right now is with CS6 and the improvements that I hope it delivers. As I am new to Premiere, it's quite possible that I am mistaken about certain functionalities or lack thereof, but I thoroughly researched each point in the help docs and forums before posting this.
My primary system is a 3.2 GHz iMac 21” (2010) with 8 GB RAM, 512MB VRAM (ATI Radeon HD), running Mac OS X 10.7 with external Firewire 800 drives and a DisplayPort-to-HDMI external display.
MAJOR ISSUES
Hardware acceleration support for ATI GPUs
There are rumors that Apple will be switching back to nVidia, but all recent iMacs have ATI and only ATI cards.
Background rendering (or at least improved rendering options)
Background rendering is probably FCPX’s most impressive feature and Adobe needs to catch up. However, even if true background rending can’t be achieved, there should be an auto-render option (after a set idle time), partial rendering (if you cancel a render, keep everything that has been rendered up until that point), and more render options (e.g. render all and render selected). Regarding that last point, I think the whole work area concept should be dropped. It makes sense for other apps, particularly for animation, but it just gets in the way of more important timeline functions while offering little functionality beyond being a clumsy way to control the area to be rendered. At the very least, have a way to hide it.
Full-screen preview
Maximizing the program frame just isn’t the same (although the grave accent key function may be reason enough to switch to Premiere). Full-screen preview isn’t just a nifty function for demo-ing sequences. It’s a big part of the way I work.
DisplayPort/Thunderbolt out to HDMI
It may be that a third-party card is required for proper color correction on an external display, but there’s no reason this feature shouldn’t exist.
Thumbnail images/show frames bug
This one drives me crazy. I’ve tested this on 3 different Mac systems with various hardware configurations. Thumbnail images in the bins and frame images in the timeline seem to be recreated every time a project is opened, even though the thumbnail image files in the media cache folder don’t actually appear to get rewritten. It’s as if there is no cache at all (even for the most recently viewed bins and timelines segments). It can’t be an intentional functionality for saving hard drive space because the cache files continue to take up more and more space.
Open multiple projects simultaneously
I know that you can cut and paste between projects but being able to open multiple projects at the same time is a very useful feature of FCP7.
Magic Mouse/Magic Trackpad scrolling
Premiere Pro is a cross-platform system and impressively so, but there need to be a few Mac-specific interface adjustments, the most important of which is support for the Magic Mouse and Magic Trackpad scrolling. I use a Magic Mouse. (It’s an irritating device sometimes, but once you get used to it, it’s hard to live without it.) When I’m in a window, I expect a flick up or down to scroll up or down -- in every situation, every time, including the timeline. Unless I stop using all other Mac apps, I will never get accustomed to the timeline suddenly flying left or right when I want to scroll up or down. Also, here’s a chance for Adobe to fix a problem that FCP7 shared: When you scroll up or down in the effect control window using the mouse, the drop-down effect controls sometimes twirl all over the place if the mouse happens to float over them. As it is, it very easy to throw settings into random disarray without even realizing it just by scrolling through the pane.
The timeline: selection indication, icons, and general improvements
It is very difficult to discern at a glance what, if anything, is selected in the timeline. Transitions always look selected! Audio tracks should be a different color or otherwise more distinct. There should be an option to show frames only without any text. The icons for track options are small, crowded, and ugly. Some of the editing icons are too similar, namely edit and ripple edit, although the excellent status bar at the bottom of the application goes a long way towards making up for this. Simply put, the timeline could use some polish. Don’t be afraid to steal from Apple on this one. Keep the tracks; just make it easier on the eyes!
Conforming audio
The ability of CS5.5 to work natively with DSLR footage is awesome, but it’s not fully DSLR native if it has to pre-render a major component of the footage before it can play, even if it’s just the audio.
Media loading
When launching a project, it can take a long time for all the media in the project to “load” as tracked in the status bar. I’m sure there’s a reason for this, but since the program is able to determine which source media files are missing before this step (and gives you the option to reconnect them), what is it doing and why must it load every clip in the project, even those not in use by any sequences?
Page up/page down and arrow key commands
For starters, the current page up/page down key functions should take the CTI to the next cut in the sequence, not the next cut in the track that happens to be targeted, which can be way down timeline. In FCP7, I frequently navigated cut to cut with the up and down arrow keys. I’ve avoided customizing the keyboard commands to match FCP7 -- I would rather endure some hardship and learn the proper Adobe commands -- but this one is flat-out backwards. The page up/down keys should page through the timeline (left to right and right to left), while the up and down arrow keys should take over the clip to clip function (assuming the targeted track issue is fixed). Currently, the down arrow takes you to the very end of the timeline, a function already duplicated by and better suited for the “end” key.
Bin management and clip relationships
Deleting an item from a bin should not delete it from the timeline, but this is part of a bigger problem, which is the whole master file versus instance versus subclip versus dup clip thing. There aren’t any good indicators regarding the relationships of these clips, and there are few ways to adjust them. If clips are going to be connected, then they should be fully connected. For instance, changing the name of a clip in the bin should change it in the timeline. Adding an effect or trimming should affect the corresponding clips between bin and timeline. Otherwise, the clips should just be completely separate instances. I haven’t been able to find an option to turn a clip into an independent instance, although I have to think it exists. Also, editing an instance of a title does change every other instance of that title throughout the sequence. I would prefer to be able to edit them separately without having to duplicate them in the title editor.
Bin effects
Related to the above, it should be possible to add effects to clips in bins or keep effects on clips added to bin from timeline. It would also be nice to be able to group effects together in bins for a specific project. The effects window is better suited for global collections.
Clearer visual indicators that a clip has been adjusted in the effect controls panel
Even with the effects panel visible, you have to take a close look to see if there have been any adjustments to the standard settings. An indicator on the clip in the timeline itself would be useful.
Snapping should include the CTI
It should also include the blade tool, although the Cmd-K option to cut at the CTI position does make this less of an issue.
Smoother scrubbing
Scrubbing is pretty awful. While this is understandable with native footage, FCPX somehow manages to make this silky smooth at full resolution.
Color correction shape mask and better color correction in general
Simplify the primary functions of the 3-way color correction effect. Keep all the rarely used adjustments out of the way. I use Magic Bullet for some purpose, but I’ve always done most of my color correction within FCP. Put the most common adjustments front and center (or up top, as it may be). The highlights/mid-tone/shadows drop-down is inconsistent in what controls it pertains to.
FCPX’s color correction is actually one of its more underrated features. The way it allows you to layer corrections is dead-simple yet as powerful as anything in FCP7 or Premiere. Stick with the 3 wheels, but rely less on hard to control tonal ranges and add simple keyframe-able shape masks for secondary color correction.
Better support for shared media access
AVID is king in this arena and Adobe needs to improve. It should be possible for multiple editors to safely work on the same project files and share media over a server.
MINOR ISSUES
More vertically compact playback/edit control area in source and program panes
Make room for either a taller timeline or bigger previews. The virtual scrubber and shuttle controls are the nifty things you drag with the mouse the first time you ever use an NLE and never touch again.
Larger icons in icon view
Remember size and position of bin windows
Playback resolution setting indicator
There should be an always-visible indicator of the playback res setting in the preview pane that’s easy to adjust without right-clicking.
Better markers for sequences and clips
Include colors and more keyboard shortcut control.
Clip sliding with keyboard commands
“Opt-,” (that’s Option-comma) should cause a clip collision, not overwrite. Either that, or “,” and “.” should slide, while “Opt-,” should overwrite. Opt-arrow should only extend an adjoining clip if in the middle of two clips. Basically, this whole arrangement should be re-thought.
Project browser should auto refresh/sort.
Option-drag on a Mac should always be copy, not move.
Copy is currently command-drag in the project browser.
Stop auto-save from interrupting adjustments in timeline.
Ideally, the auto-save should just be a background function, but it should at least wait until you’re not in the middle of dragging something.
Add ability to select a cut directly and add default transition.
CTI control
If you move the CTI while it’s in play mode, it should continue to play from that spot after you release the mouse, not stop there.
Show number of frames being adjusted during keyframe adjustments.
Enable/disable specific effect parameters/keyframes.
Clearing an effect should clear keyframes as well.
Or have an option to clear both.
Position controls
There should be a preference to make the default position 0.0 x 0.0 (as opposed to 50% of whatever the resolution happens to be), and include a reset button.
Through-edit indicator in timeline
And a quick way to join clips, such as a right-click menu option.
Border controls for images
Auto save location preference and functionality
In FCP7 I set the number of auto saves to keep to the maximum of 100 and Premiere can go even higher. I have always used this feature as an additional backup and archive system, which has come in very handy. Those files add up, however. So, I prefer to auto-save to an external drive. Also, auto saves in Premiere continue to occur whenever there are unsaved changes. This means that if you make a small adjustment and then leave Premiere for a while, it will keep auto saving the same iteration, which is not only inefficient but leads to my next point….
Tame the bouncing dock icon on auto save
While using other apps, there’s no need for the dock icon to bounce every time Premiere performs an auto save.
More/clearer control over cache locations
There should also be an option to reset the cache/render file locations to their defaults.
Export source range
When exporting, remember the last-used setting of the export source range (or just dump the whole work area thing as I previously suggested). It’s too easy to cut off a portion of the video when the export defaults back to the work area every time.
Larger timecode display
After spending hours and hours editing, the current timecode for clips and sequences is something you want to be able to track without squinting. Use the letters h,m,s and f instead of colons.
Simple slug
Creating a black matte works okay, but it involves a few extra steps.
Snapping toggle
FCP allows you to quickly toggle snapping while dragging a clip. Upon releasing the clip, the snap toggle returns to its original state. Premiere could use this fucntion, but I suggest something simpler. Holding down the “S” key should always turn snapping on regardless of toggle state, while releasing it returns it to however it was set before.
Ability to dock the audio meters along top
I like to give my timeline as much horizontal space as possible. I’ve noticed a lot of users keep the toolbar up there, myself included. I think it would be a good place horizontally aligned audio meters as well.
More detailed tool tips or hover explanations in preferences
For example: The options regarding XMP data should make it clear that the original files will be modified by Premiere. This caused me problems in other applications. (After researching these settings, I understand that various Adobe applications use this information to share resources, but it’s still very unclear what the specific benefits are or what functions are lost without this option.)
More detailed support documents
The online support documents on the Adobe site very good. They are nicely arranged and easy to search, but they could be more detailed and offer fuller explanations. (Peruse the support forums and you will discover all kinds of debates that could have been easily cleared up with one concise line in a help document.)
Icons and button design
Icons and buttons are often too small, too similar, and too crowded throughout the interface. Take some style tips from Apple on this one.
NEW FEATURE WISH LIST
Footage auto-analysis: shot recognition, color correction, and color match
If only Apple had just added these features and others to the FCP7 framework. Adobe can do it better though, by using smart folders in addition to the traditional bins that we know and trust (anything besides those dreadful iMovie-style “events”).
Effect previews
In the 64-bit era, there has to be a quicker way to preview effects.
Ability to render in alternate formats
Namely ProRes or DNxHD. This would save me considerable time on exports by allowing me to select the “use preview files” option.
PluralEyes functionality
Okay, I suppose I should just purchase PluralEyes...again.
Many, many more effects!
How about starting with the missing vignette effect? Just because an app is “pro” doesn’t mean you should have to custom build every effect.
Many, many more looks!
Will most of them be cheesy looks I would never touch? Sure...but give me some templates to play with before I tweak the look down to my exact specifications.
More speed!
FCPX, for all its flaws, blazes on any modern Mac. This probably comes back to hardware acceleration, but while Premiere Pro on a Mac isn’t slow, it doesn’t blow you away.You hit the nail on the head, Peter.
I recently started giving Premiere Pro CS5 a try, and was shocked by the amount of bugs and usability issues. I'm not even going as deep as you in the features, but the most glaring evidence of the lousy interface is that timecode offset bubble that appears everytime you move a clip in the timeline... the bugger appears just under your mouse pointer and won't go away, so if you try to just move a clip down a track quickly, and let go of the button ONTO the bubble, it acts as an obstacle and your drag/drop fails ! seriously, Adobe... don't tell me nobody has stumbled upon this one during beta-testing ?
Ditto on the autosave that basicly interrupts anything you're doing. No background saving in 2011 ? At first it bothered me to no end so I disabled the autosave. And then a few hours later, Premiere crashed, and didn't even try to recover my work. I lost 2 hours of intricate work. I put autosave back on, and learned to endure the constant, annoying save dialog. And it's not like the save process is instant... even the simplest of projects takes 5 to 10 seconds to save... on an SSD... come on... let me work already...
Of course, a headache-inducing implementation wouldn't be complete if the autosave didn't trigger even 30 seconds after a manual save. If I choose an interval of 5 minutes, just autosave 5 minutes after a manual save !
In thumbnail view, you can reorder the clips manually. It's all fine, but you can't reorder them by name or date or length, unless you switch to list view and of course, lose the thumbnails.
Dragging and dropping a clip in thumbnail view is a chore, because the palette doesn't scroll when the mouse reaches the edge. You know, when you want to move something at the top all the way to the bottom... so you have to drag, let go, scroll one screen, drag, let go, scroll one screen... it's a joke. Even the timeline can do it. Heck, it's a software standard, nowadays.
Renaming a clip and pressing ENTER takes you back to... the top of the folder !?! How many times I've renamed files that were at the end of the thumbnail view, and for each clip, I had to scroll back down. Time waster.
Want to locate a clip from the timeline, in the project ? the locate function takes you to the folder. But not to the file, you have to navigate towards it manually.
Ditto on the up/down arrows. I haven't found a way to jump from cut to cut like in FCP7. How often do I need to jump to the starting/ending points ? much less often than jumping to a nearby cut.
How come I can't reorder filters in the effects pane ? sorry, I can actually reorder the filters... provided I take them from the bottom and move them up. Moving effects down doesn't work. It's driving me crazy.
Conforming happens more or less anytime. Without reason. And even if the Media Cache is already full of conformed files.
When moving the boundaries of the work area, no timecode/offset appears. You need to let go of the button and THEN hover, then you'll know the exact time/duration.
Try scrolling up in the timeline, it scrolls to the left (which is stupid, it should scroll up). Now scroll up on the tabs of a palette : they scroll to the right !?!
Can't select an active track. Direct consequence : copy-pasting a clip overlaps anything that's on track 1. Say I want to duplicate clips on the same track... I can't do it.
Copy-pasting between projects doesn't keep the transitions, only the order of the clips.
Have you tried doing a frame freeze on a reversed clip and setting proper in/out points for the freeze ? Good luck.
"Duplicate" command, when you right click on a thumbnail, is way too far from the cut/copy/paste commands at the top, even though they're quite related.
The other day I transcoded footage with different audio parameters. Just the audio had changed. Upon opening the project, Premiere wanted me to locate the files, which I did. And it failed miserably. Instead, I opened the project ignoring the missing files, and then re-linked them. I pointed Premiere at the first missing file, and had to confirm the replacement. Premiere saw all the other missing files in that folder, and began prompting me FOR EACH SINGLE FILE !!! two hundred and forty three of them, precisely. Can't I have a "yes to all" button in 2012 ? and why does the relinking work inside the project and not when you open a project ?
That was just from 3 days with Premiere Pro CS5. I still can't believe it. Just to think people bashed Final Cut Pro X, praising Premiere in comparison... Sorry, but they both have serious issues. And Premiere doesn't even have the excuse of novelty. -
I cannot update Photoshop CS5, Bridge Extended after a fresh reinstall.
It's running in 32 and 64, but there's all these quirks.Like Bridge crashing in 64 but not 32. Raw also.The ATI Radeon5450 is often problematic (not capable of Open GL) In fact, I've been unable to work for a month now. Also, I can't tell if I've got Extended, I tried a downloaded install as well as from my original disk.
Here's what I have (Sorry about the size, I didn't know what might help)
Summary
Operating System
Windows 7 Home Premium 64-bit SP1
CPU
AMD Phenom II X6 1035T 29 °C
Thuban 45nm Technology
RAM
8.00GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
Motherboard
Dell Inc. 0FF3FN (CPU 1) 31 °C
Graphics
Generic Non-PnP Monitor (1360x768@60Hz)
P244W (1920x1080@60Hz)
1024MB ATI AMD Radeon HD 5450 (Dell) 51 °C
Hard Drives
932GB Seagate ST310005 28AS SATA Disk Device (SATA) 32 °C
Optical Drives
HL-DT-ST DVD+-RW GH50N SATA CdRom Device
Audio
Realtek High Definition Audio
Operating System
Windows 7 Home Premium 64-bit SP1
Computer type: Desktop
Installation Date: 06/17/10 12:43:37
Serial Number: 6RBBT-F8VPQ-QCPVQ-KHRB8-RMV82
Windows Security Center
User Account Control (UAC) Enabled
Notify level 1 - Rare Notify
Windows Update
AutoUpdate Download Automatically and Install at Set Scheduled time
Schedule Frequency Every Day
Schedule Time 3:00 AM
Windows Defender
Windows Defender Disabled
Firewall
Firewall Enabled
Display Name AVG Internet Security 2013
Antivirus
Antivirus Enabled
Display Name AVG Internet Security 2013
Virus Signature Database Up to date
.NET Frameworks installed
v4.5 Full
v4.5 Client
v3.5 SP1
v3.0 SP2
v2.0 SP2
Internet Explorer
Version 11.0.9600.17207
PowerShell
Version 2.0
Java
Java Runtime Environment
Path C:\Program Files (x86)\Java\jre6\bin\java.exe
Version 6.0
Update 37
Build 06
Java Runtime Environment
Path C:\Program Files\Java\jre6\bin\java.exe
Version 6.0
Update 23
Build 05
Java Runtime Environment
Path C:\Program Files (x86)\Java\jre7\bin\java.exe
Version 7.0
Update 55
Build 14
Java Runtime Environment
Path C:\Program Files\Java\jre7\bin\java.exe
Version 7.0
Update 51
Build 13
Environment Variables
USERPROFILE C:\Users\Admin
SystemRoot C:\Windows
User Variables
TEMP C:\Users\Admin\AppData\Local\Temp
TMP C:\Users\Admin\AppData\Local\Temp
Machine Variables
ComSpec C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK NO
OS Windows_NT
Path C:\Program Files\Common Files\Microsoft Shared\Windows Live
C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live
C:\Windows\system32
C:\Windows
C:\Windows\System32\Wbem
C:\Windows\System32\WindowsPowerShell\v1.0\
c:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static
C:\Program Files (x86)\AMD\Fusion Media Explorer\
c:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLShared\
C:\Program Files (x86)\Windows Live\Shared
C:\Program Files (x86)\Calibre2\
C:\Program Files (x86)\QuickTime\QTSystem\
C:\Program Files (x86)\Smart Projects\IsoBuster
PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE AMD64
TEMP C:\Windows\TEMP
TMP C:\Windows\TEMP
USERNAME SYSTEM
windir C:\Windows
PSModulePath C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
NUMBER_OF_PROCESSORS 6
PROCESSOR_LEVEL 16
PROCESSOR_IDENTIFIER AMD64 Family 16 Model 10 Stepping 0, AuthenticAMD
PROCESSOR_REVISION 0a00
asl.log Destination=file
Power Profile
Active power scheme High performance
Hibernation Disabled
Turn Off Monitor after: (On AC Power) 60 min
Turn Off Hard Disk after: (On AC Power) Never
Suspend after: (On AC Power) 60 min
Screen saver Disabled
Uptime
Current Session
Current Time 7/11/2014 7:16:54 AM
Current Uptime 10,666 sec (0 d, 02 h, 57 m, 46 s)
Last Boot Time 7/11/2014 4:19:08 AM
TimeZone
TimeZone GMT -8:00 Hours
Language English (United States)
Location United States
Format English (United States)
Currency $
Date Format M/d/yyyy
Time Format h:mm:ss tt
Process List
AAM Updates Notifier.exe
Process ID 6124
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\UWA\AAM Updates Notifier.exe
Memory Usage 7.09 MB
Peak Memory Usage 15 MB
alg.exe
Process ID 2164
User LOCAL SERVICE
Domain NT AUTHORITY
Path C:\Windows\System32\alg.exe
Memory Usage 2.00 MB
Peak Memory Usage 4.63 MB
armsvc.exe
Process ID 1924
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\armsvc.exe
Memory Usage 16 MB
Peak Memory Usage 19 MB
atieclxx.exe
Process ID 1276
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\atieclxx.exe
Memory Usage 6.10 MB
Peak Memory Usage 8.94 MB
atiesrxx.exe
Process ID 932
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\atiesrxx.exe
Memory Usage 2.21 MB
Peak Memory Usage 4.74 MB
audiodg.exe
Process ID 3912
User LOCAL SERVICE
Domain NT AUTHORITY
Memory Usage 19 MB
Peak Memory Usage 34 MB
AVG-Secure-Search-Update_MAY2013_TB.exe
Process ID 2252
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\AVG SafeGuard toolbar\AVG-Secure-Search-Update_MAY2013_TB.exe
Memory Usage 4.22 MB
Peak Memory Usage 5.21 MB
avgcfgex.exe
Process ID 3980
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\AVG\AVG2013\avgcfgex.exe
Memory Usage 2.04 MB
Peak Memory Usage 5.21 MB
avgcsrva.exe
Process ID 4064
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\AVG\AVG2013\avgcsrva.exe
Memory Usage 44 MB
Peak Memory Usage 54 MB
avgcsrva.exe
Process ID 2964
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\AVG\AVG2013\avgcsrva.exe
Memory Usage 129 MB
Peak Memory Usage 219 MB
avgemca.exe
Process ID 2616
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\AVG\AVG2013\avgemca.exe
Memory Usage 8.71 MB
Peak Memory Usage 13 MB
avgfws.exe
Process ID 1996
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\AVG\AVG2013\avgfws.exe
Memory Usage 29 MB
Peak Memory Usage 48 MB
avgidsagent.exe
Process ID 2044
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\AVG\AVG2013\avgidsagent.exe
Memory Usage 36 MB
Peak Memory Usage 41 MB
avgnsa.exe
Process ID 2600
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\AVG\AVG2013\avgnsa.exe
Memory Usage 20 MB
Peak Memory Usage 27 MB
avgrsa.exe
Process ID 2828
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\AVG\AVG2013\avgrsa.exe
Memory Usage 88 MB
Peak Memory Usage 102 MB
avgui.exe
Process ID 5128
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\AVG\AVG2013\avgui.exe
Memory Usage 19 MB
Peak Memory Usage 110 MB
avgwdsvc.exe
Process ID 1232
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\AVG\AVG2013\avgwdsvc.exe
Memory Usage 25 MB
Peak Memory Usage 54 MB
CCC.exe
Process ID 5420
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static\CCC.exe
Memory Usage 119 MB
Peak Memory Usage 128 MB
CS5ServiceManager.exe
Process ID 736
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Common Files\Adobe\CS5ServiceManager\CS5ServiceManager.exe
Memory Usage 7.50 MB
Peak Memory Usage 7.50 MB
csrss.exe
Process ID 456
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\csrss.exe
Memory Usage 9.57 MB
Peak Memory Usage 11 MB
csrss.exe
Process ID 540
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\csrss.exe
Memory Usage 19 MB
Peak Memory Usage 32 MB
Dropbox.exe
Process ID 5568
User Admin
Domain HANDYWERKSTATIO
Path C:\Users\Admin\AppData\Roaming\Dropbox\bin\Dropbox.exe
Memory Usage 137 MB
Peak Memory Usage 191 MB
DSUpd.exe
Process ID 4200
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Dell DataSafe Local Backup\Components\DSUpdate\DSUpd.exe
Memory Usage 7.46 MB
Peak Memory Usage 18 MB
E_S40RPB.EXE
Process ID 1764
User SYSTEM
Domain NT AUTHORITY
Path C:\ProgramData\EPSON\EPW!3 SSRP\E_S40RPB.EXE
Memory Usage 1.21 MB
Peak Memory Usage 3.76 MB
E_S40STB.EXE
Process ID 1360
User SYSTEM
Domain NT AUTHORITY
Path C:\ProgramData\EPSON\EPW!3 SSRP\E_S40STB.EXE
Memory Usage 1.38 MB
Peak Memory Usage 4.25 MB
eEBSvc.exe
Process ID 1680
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\Common Files\EPSON\EBAPI\eEBSVC.exe
Memory Usage 9.88 MB
Peak Memory Usage 13 MB
EEventManager.exe
Process ID 5196
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Epson Software\Event Manager\EEventManager.exe
Memory Usage 8.48 MB
Peak Memory Usage 12 MB
EvernoteClipper.exe
Process ID 5328
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Evernote\Evernote\EvernoteClipper.exe
Memory Usage 4.85 MB
Peak Memory Usage 8.15 MB
explorer.exe
Process ID 2416
User Admin
Domain HANDYWERKSTATIO
Path C:\Windows\Explorer.EXE
Memory Usage 223 MB
Peak Memory Usage 277 MB
firefox.exe
Process ID 5924
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Memory Usage 656 MB
Peak Memory Usage 760 MB
FreemakeUtilsService.exe
Process ID 1732
User SYSTEM
Domain NT AUTHORITY
Path C:\ProgramData\Freemake\FreemakeUtilsService\FreemakeUtilsService.exe
Memory Usage 81 MB
Peak Memory Usage 90 MB
Fuel.Service.exe
Process ID 1972
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files\ATI Technologies\ATI.ACE\Fuel\Fuel.Service.exe
Memory Usage 4.38 MB
Peak Memory Usage 7.82 MB
GoogleCrashHandler.exe
Process ID 5640
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\Google\Update\1.3.24.15\GoogleCrashHandler.exe
Memory Usage 656 KB
Peak Memory Usage 4.53 MB
GoogleCrashHandler64.exe
Process ID 288
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\Google\Update\1.3.24.15\GoogleCrashHandler64.exe
Memory Usage 716 KB
Peak Memory Usage 4.96 MB
GoogleUpdate.exe
Process ID 5492
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\Google\Update\GoogleUpdate.exe
Memory Usage 5.27 MB
Peak Memory Usage 7.61 MB
ipoint.exe
Process ID 4244
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files\Microsoft IntelliPoint\ipoint.exe
Memory Usage 20 MB
Peak Memory Usage 31 MB
lsass.exe
Process ID 652
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\lsass.exe
Memory Usage 16 MB
Peak Memory Usage 20 MB
lsm.exe
Process ID 660
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\lsm.exe
Memory Usage 2.94 MB
Peak Memory Usage 5.04 MB
mbae-svc.exe
Process ID 2896
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\Malwarebytes Anti-Exploit\mbae-svc.exe
Memory Usage 7.40 MB
Peak Memory Usage 12 MB
mbae.exe
Process ID 5276
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Malwarebytes Anti-Exploit\mbae.exe
Memory Usage 5.36 MB
Peak Memory Usage 10 MB
mbam.exe
Process ID 3520
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Malwarebytes Anti-Malware\mbam.exe
Memory Usage 48 MB
Peak Memory Usage 72 MB
mbamscheduler.exe
Process ID 2332
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\Malwarebytes Anti-Malware\mbamscheduler.exe
Memory Usage 13 MB
Peak Memory Usage 18 MB
mbamservice.exe
Process ID 3396
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\Malwarebytes Anti-Malware\mbamservice.exe
Memory Usage 74 MB
Peak Memory Usage 260 MB
mDNSResponder.exe
Process ID 1624
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files\Bonjour\mDNSResponder.exe
Memory Usage 3.91 MB
Peak Memory Usage 6.45 MB
Microsoft.MDX.AnalyticsService.exe
Process ID 3488
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\Microsoft Digital Experience\Microsoft.MDX.AnalyticsService.exe
Memory Usage 57 MB
Peak Memory Usage 65 MB
MOM.exe
Process ID 6104
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static\MOM.exe
Memory Usage 110 MB
Peak Memory Usage 111 MB
OSPPSVC.EXE
Process ID 5116
User NETWORK SERVICE
Domain NT AUTHORITY
Path C:\Program Files\Common Files\Microsoft Shared\OfficeSoftwareProtectionPlatform\OSPPSVC.EXE
Memory Usage 8.32 MB
Peak Memory Usage 14 MB
Photoshop.exe
Process ID 5956
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Photoshop.exe
Memory Usage 2.09 GB
Peak Memory Usage 2.10 GB
RAVCpl64.exe
Process ID 1268
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files\Realtek\Audio\HDA\RAVCpl64.exe
Memory Usage 14 MB
Peak Memory Usage 22 MB
services.exe
Process ID 644
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\services.exe
Memory Usage 7.89 MB
Peak Memory Usage 15 MB
SftService.exe
Process ID 3656
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\Dell DataSafe Local Backup\sftservice.EXE
Memory Usage 8.15 MB
Peak Memory Usage 13 MB
smss.exe
Process ID 312
User SYSTEM
Domain NT AUTHORITY
Path \SystemRoot\System32\smss.exe
Memory Usage 1.91 MB
Peak Memory Usage 2.41 MB
Speccy64.exe
Process ID 8140
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files\Speccy\Speccy64.exe
Memory Usage 30 MB
Peak Memory Usage 30 MB
spoolsv.exe
Process ID 1436
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\System32\spoolsv.exe
Memory Usage 20 MB
Peak Memory Usage 27 MB
STService.exe
Process ID 4276
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Dell DataSafe Local Backup\COMPONENTS\SCHEDULER\STSERVICE.EXE
Memory Usage 12 MB
Peak Memory Usage 18 MB
svchost.exe
Process ID 1016
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\System32\svchost.exe
Memory Usage 262 MB
Peak Memory Usage 350 MB
svchost.exe
Process ID 132
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\svchost.exe
Memory Usage 58 MB
Peak Memory Usage 768 MB
svchost.exe
Process ID 3792
User NETWORK SERVICE
Domain NT AUTHORITY
Path C:\Windows\system32\svchost.exe
Memory Usage 4.29 MB
Peak Memory Usage 7.56 MB
svchost.exe
Process ID 656
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\svchost.exe
Memory Usage 3.31 MB
Peak Memory Usage 6.21 MB
svchost.exe
Process ID 6152
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\svchost.exe
Memory Usage 1.82 MB
Peak Memory Usage 4.96 MB
svchost.exe
Process ID 376
User LOCAL SERVICE
Domain NT AUTHORITY
Path C:\Windows\system32\svchost.exe
Memory Usage 18 MB
Peak Memory Usage 22 MB
svchost.exe
Process ID 1112
User NETWORK SERVICE
Domain NT AUTHORITY
Path C:\Windows\system32\svchost.exe
Memory Usage 19 MB
Peak Memory Usage 24 MB
svchost.exe
Process ID 1528
User LOCAL SERVICE
Domain NT AUTHORITY
Path C:\Windows\system32\svchost.exe
Memory Usage 17 MB
Peak Memory Usage 21 MB
svchost.exe
Process ID 1552
User LOCAL SERVICE
Domain NT AUTHORITY
Path C:\Windows\system32\svchost.exe
Memory Usage 10 MB
Peak Memory Usage 18 MB
svchost.exe
Process ID 764
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\svchost.exe
Memory Usage 14 MB
Peak Memory Usage 18 MB
svchost.exe
Process ID 844
User NETWORK SERVICE
Domain NT AUTHORITY
Path C:\Windows\system32\svchost.exe
Memory Usage 7.57 MB
Peak Memory Usage 11 MB
svchost.exe
Process ID 976
User LOCAL SERVICE
Domain NT AUTHORITY
Path C:\Windows\System32\svchost.exe
Memory Usage 43 MB
Peak Memory Usage 50 MB
System
Process ID 4
Memory Usage 188 MB
Peak Memory Usage 369 MB
System Idle Process
Process ID 0
taskeng.exe
Process ID 1476
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\taskeng.exe
Memory Usage 3.57 MB
Peak Memory Usage 6.61 MB
taskhost.exe
Process ID 2212
User Admin
Domain HANDYWERKSTATIO
Path C:\Windows\system32\taskhost.exe
Memory Usage 15 MB
Peak Memory Usage 23 MB
Toaster.exe
Process ID 3896
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\Dell DataSafe Local Backup\TOASTER.EXE
Memory Usage 106 MB
Peak Memory Usage 124 MB
TuneUpUtilitiesApp64.exe
Process ID 1380
User Admin
Domain HANDYWERKSTATIO
Path C:\Program Files (x86)\AVG\AVG PC TuneUp\TuneUpUtilitiesApp64.exe
Memory Usage 7.35 MB
Peak Memory Usage 12 MB
TuneUpUtilitiesService64.exe
Process ID 3740
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files (x86)\AVG\AVG PC TuneUp\TuneUpUtilitiesService64.exe
Memory Usage 17 MB
Peak Memory Usage 30 MB
wininit.exe
Process ID 532
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\wininit.exe
Memory Usage 3.78 MB
Peak Memory Usage 7.03 MB
winlogon.exe
Process ID 600
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\winlogon.exe
Memory Usage 4.29 MB
Peak Memory Usage 6.38 MB
WLIDSVC.EXE
Process ID 3864
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files\Common Files\Microsoft Shared\Windows Live\WLIDSVC.EXE
Memory Usage 9.04 MB
Peak Memory Usage 17 MB
WLIDSVCM.EXE
Process ID 1140
User SYSTEM
Domain NT AUTHORITY
Path C:\Program Files\Common Files\Microsoft Shared\Windows Live\WLIDSvcM.exe
Memory Usage 1.34 MB
Peak Memory Usage 3.83 MB
WmiApSrv.exe
Process ID 5268
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\wbem\WmiApSrv.exe
Memory Usage 6.47 MB
Peak Memory Usage 6.47 MB
WmiPrvSE.exe
Process ID 5344
User NETWORK SERVICE
Domain NT AUTHORITY
Path C:\Windows\system32\wbem\wmiprvse.exe
Memory Usage 20 MB
Peak Memory Usage 20 MB
WmiPrvSE.exe
Process ID 5448
User SYSTEM
Domain NT AUTHORITY
Path C:\Windows\system32\wbem\wmiprvse.exe
Memory Usage 20 MB
Peak Memory Usage 20 MB
wmpnetwk.exe
Process ID 3644
User NETWORK SERVICE
Domain NT AUTHORITY
Path C:\Program Files\Windows Media Player\wmpnetwk.exe
Memory Usage 50 MB
Peak Memory Usage 50 MB
Scheduler
7/11/2014 7:35 AM; DigitalSite
7/11/2014 7:36 AM; GoogleUpdateTaskUserS-1-5-21-2935147341-2944613476-2207280127-1002UA
7/11/2014 7:47 AM; Adobe Flash Player Updater
7/11/2014 12:00 PM; SystemToolsDailyTest
7/11/2014 10:36 PM; GoogleUpdateTaskUserS-1-5-21-2935147341-2944613476-2207280127-1002Core
7/11/2014 11:16 PM; IORRT
7/12/2014 2:00 AM; AdobeAAMUpdater-1.0-HANDYWERKSTATIO-Admin
7/14/2014 10:00 AM; Adobe online update program
7/14/2014 10:00 AM; ALL Update
7/14/2014 10:00 AM; FileHippo.com online update program
7/14/2014 10:00 AM; Java Update Scheduler
7/25/2014 8:00 PM; PCDoctorBackgroundMonitorTask
AVG-Secure-Search-Update_MAY2013_TB_rel
CCleanerSkipUAC
Google Updater and Installer
GoogleUpdateTaskMachineCore
GoogleUpdateTaskMachineUA
Hybrid
PCDEventLauncherTask
Private Internet Access Startup
SidebarExecute
TuneUpUtilities_Task_BkGndMaintenance2013
Hotfixes
7/10/2014 Security Update for Windows 7 for x64-based Systems (KB2971850)
A security issue has been identified in a Microsoft software
product that could affect your system. You can help protect your
system by installing this update from Microsoft. For a complete
listing of the issues that are included in this update, see the
associated Microsoft Knowledge Base article. After you install
this update, you may have to restart your system.
7/10/2014 Update for Microsoft Office 2010 (KB2878252) 32-Bit Edition
Microsoft has released an update for Microsoft Office 2010 32-Bit
Edition. This update provides the latest fixes to Microsoft Office
2010 32-Bit Edition. Additionally, this update contains stability
and performance improvements.
7/10/2014 Update for Microsoft Office 2010 (KB2881028) 32-Bit Edition
Microsoft has released an update for Microsoft Office 2010 32-Bit
Edition. This update provides the latest fixes to Microsoft Office
2010 32-Bit Edition. Additionally, this update contains stability
and performance improvements.
7/10/2014 Update for Microsoft Office 2010 (KB2837581) 32-Bit Edition
Microsoft has released an update for Microsoft Office 2010 32-Bit
Edition. This update provides the latest fixes to Microsoft Office
2010 32-Bit Edition. Additionally, this update contains stability
and performance improvements.
7/10/2014 Update for Windows 7 for x64-based Systems (KB2952664)
Install this update to resolve issues in Windows. For a complete
listing of the issues that are included in this update, see the
associated Microsoft Knowledge Base article for more information.
After you install this item, you may have to restart your computer.
7/10/2014 Update for Windows 7 for x64-based Systems (KB2966583)
Install this update to resolve issues in Windows. For a complete
listing of the issues that are included in this update, see the
associated Microsoft Knowledge Base article for more information.
After you install this item, you may have to restart your computer.
7/10/2014 Security Update for Windows 7 for x64-based Systems (KB2973201)
A security issue has been identified in a Microsoft software
product that could affect your system. You can help protect your
system by installing this update from Microsoft. For a complete
listing of the issues that are included in this update, see the
associated Microsoft Knowledge Base article. After you install
this update, you may have to restart your system.
7/10/2014 Update for Microsoft Excel 2010 (KB2837600) 32-Bit Edition
Microsoft has released an update for Microsoft Excel 2010 32-Bit
Edition. This update provides the latest fixes to Microsoft Excel
2010 32-Bit Edition. Additionally, this update contains stability
and performance improvements.
7/10/2014 Windows Malicious Software Removal Tool x64 - July 2014 (KB890830)
After the download, this tool runs one time to check your computer
for infection by specific, prevalent malicious software (including
Blaster, Sasser, and Mydoom) and helps remove any infection that
is found. If an infection is found, the tool will display a status
report the next time that you start your computer. A new version
of the tool will be offered every month. If you want to manually
run the tool on your computer, you can download a copy from the
Microsoft Download Center, or you can run an online version from
microsoft.com. This tool is not a replacement for an antivirus
product. To help protect your computer, you should use an antivirus
product.
7/10/2014 Definition Update for Microsoft Office 2010 (KB982726) 32-Bit Edition
This update provides the latest junk email and malicious links
filter definitions for Microsoft Office 2010 32-Bit Edition.
7/10/2014 Security Update for Windows 7 for x64-based Systems (KB2972280)
A security issue has been identified in a Microsoft software
product that could affect your system. You can help protect your
system by installing this update from Microsoft. For a complete
listing of the issues that are included in this update, see the
associated Microsoft Knowledge Base article. After you install
this update, you may have to restart your system.
7/10/2014 Security Update for Windows 7 for x64-based Systems (KB2961072)
A security issue has been identified in a Microsoft software
product that could affect your system. You can help protect your
system by installing this update from Microsoft. For a complete
listing of the issues that are included in this update, see the
associated Microsoft Knowledge Base article. After you install
this update, you may have to restart your system.
7/10/2014 Update for Microsoft Office 2010 (KB2837606) 32-Bit Edition
Microsoft has released an update for Microsoft Office 2010 32-Bit
Edition. This update provides the latest fixes to Microsoft Office
2010 32-Bit Edition. Additionally, this update contains stability
and performance improvements.
7/10/2014 Update for Windows 7 for x64-based Systems (KB2973337)
Install this update to resolve issues in Windows. For a complete
listing of the issues that are included in this update, see the
associated Microsoft Knowledge Base article for more information.
After you install this item, you may have to restart your computer.
7/10/2014 Cumulative Security Update for Internet Explorer 11 for Windows 7 for x64-based Systems (KB2962872)
A security issue has been identified in a Microsoft software
product that could affect your system. You can help protect your
system by installing this update from Microsoft. For a complete
listing of the issues that are included in this update, see the
associated Microsoft Knowledge Base article. After you install
this update, you may have to restart your system.
7/10/2014 Security Update for Windows 7 for x64-based Systems (KB2973351)
A security issue has been identified in a Microsoft software
product that could affect your system. You can help protect your
system by installing this update from Microsoft. For a complete
listing of the issues that are included in this update, see the
associated Microsoft Knowledge Base article. After you install
this update, you may have to restart your system.
6/24/2014 Security Update for Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package (KB2565063)
A security issue has been identified leading to MFC application
vulnerability in DLL planting due to MFC not specifying the full
path to system/localization DLLs. You can protect your computer
by installing this update from Microsoft. After you install this
item, you may have to restart your computer.
6/23/2014 Security Update for Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package (KB2565063)
A security issue has been identified leading to MFC application
vulnerability in DLL planting due to MFC not specifying the full
path to system/localization DLLs. You can protect your computer
by installing this update from Microsoft. After you install this
item, you may have to restart your computer.
6/12/2014 Windows Malicious Software Removal Tool x64 - June 2014 (KB890830)
After the download, this tool runs one time to check your computer
for infection by specific, prevalent malicious software (including
Blaster, Sasser, and Mydoom) and helps remove any infection that
is found. If an infection is found, the tool will display a status
report the next time that you start your computer. A new version
of the tool will be offered every month. If you want to manually
run the tool on your computer, you can download a copy from the
Microsoft Download Center, or you can run an online version from
microsoft.com. This tool is not a replacement for an antivirus
product. To help protect your computer, you should use an antivirus
product.
6/12/2014 Security Update for Windows 7 for x64-based Systems (KB2957509)
A security issue has been identified in a Microsoft software
product that could affect your system. You can help protect your
system by installing this update from Microsoft. For a complete
listing of the issues that are included in this update, see the
associated Microsoft Knowledge Base article. After you install
this update, you may have to restaupdate directly, http://www.adobe.com/downloads/updates/
Maybe you are looking for
-
Interest calculation on vendor down payments
With reference to above subject, I have configured all the settings, after that i was executed vendor interest calculation in F.4A, system showing batch in put session created.But it is not showing intrest break up... after that I had run the batch i
-
Add interaction to the end of a video
I have a client that wants to have a video be used as an instructional video. The video will be visible on the internet - on the company website. The client wants someone to view the entire video then have the ability to fill out a form and not go to
-
Is my uh... battery suppost to flop out?
Hello my friends, I'd like to tell you of the wonderful things that has happened to me over the past year with myself and my iBook G4. I got the machine back in February of last year from Amazon.com, they were having a really good deal so I said "Wha
-
Please read this and help me.
I got passed on OCJP exam and need certificates right now so I sent lots of e-mail to oracle official e-mail. like 3days ago, I got an requesting e-mail from [email protected] saying that I need to send my address to [email protected] so that they ca
-
Unexpected error when configure a new web application
hello, I'm trying to create a new web application ( under Deployments in console). I just manually create an sub-dir under ".\config\<active-domain>\applications" directory, say WebAppDir. Then I went to the console and right-click on the "Web Applic