My 2006 24" iMac (6.1) no longer recognizes Tiger 10.4

As I remember, in 2006 this imac had Tiger 10.4 installed when new. Since then, I've done a clean install to Snow Lion 10.6.8. Now when I try to reinstall Tiger I see a dialog box that tells me this computer does not support Tiger! Does anyone know why and how to go back to Tiger?

Thank you Klaus, I suspected as much but wasn't sure. What I want to do is load Tiger onto an external HD so I can see Tiger as I talk my sister through a problem. Besides wiping the boot HD, is there a way to put Tiger on an external drive? Guessing "No"...

Similar Messages

Late 2006, 24" iMac, 2.16 GHz Intel Core 2 Duo, Screen Tearing, nVidia 7300

Late 2006, 24" iMac, 2.16 GHz Intel Core 2 Duo, Screen Tearing, nVidia GeForce 7300 GT
I've been suffering with screen tearing, strange screen artifacts, etc. followed by totally unresponsive freezing machine. This problem has been happening to varying degrees for about 9 months.
Initially, I was able to mitigate the problem with smcFanControl. Adjusting the fan speeds up helped keep the machine cool and prevent most of the problems. Recently, we had a spell of hot weather and the fans just couldn't keep up. If you're using smcFanControl, the only fan speed that will really make a difference is the CPU. The HDD and ODD fans are no where near where you need to be.
Also, I noticed the machine was LOADED with dust when I took it apart, including the heat sink fins for the graphics card. If you have time you may want to try a thorough cleaning with compressed air before replacing the card. You just need to get through step 11 below to access what needs to be cleaned.
Based on reading here and elsewhere, I decided to replace the graphics card. To give back to the community, I wanted to layout the procedure here.
Where to buy the card.
I had a tough time finding the right card. I did exhaustive web searches using every combination of Nvidia 7300 GT, etc. You really need to search by the Apple part number. The Apple part number for the 7300 is 661-4179, for the 7600 is 661-4180. I found it at We Love Macs and at dv warehouse. I paid $248 for the 7600 card. BE CAREFUL buying a "refurbished" card. At We Love Macs, "refurbished" means "pulled from a working machine." Could be a machine with as much mileage as yours and prone to the same failures as yours.
The card is an MXM style card (generally used in laptops), with a giant heat sink and heat pipe assembly. The card can be separated from the heat assembly. If I had time, I would have tried a generic, cheaper, MXM style card.
Dispelling some myths.
People here and elsewhere have said that no Intel iMac graphics card can be replaced, that they're wedded to the logic board. The one on this model can be replaced, I've done it. Also, some have said you can't put a 256MB, 7600 GT in a machine that originally had a 128MB, 7300 GT. Also, not true. That's what I did to my machine and it is working fine.
So here's the step-by-step on my take apart and replacement. This is just one user helping out others, PROCEED AT YOUR OWN RISK. This takes about 1 1/2 hours to take apart and 2 to put back together.
1) Install the iStat widget and monitor the temperatures for a few days and record the temperatures (to be able to verify that you've completed the repair correctly later)
2) Make a complete backup of any internal drives and make sure the backup will be bootable (use Carbon Copy Cloner)
3) Use static safeguards, like an anti-static wrist strap.
4) Get a pen a stack of paper envelopes to separate and label the pieces you remove.
5) You'll need a #2 Phillips and #6, 8, 10 Torx. Most of the screws at T-8. There are 8 T-8s holding in the LCD. They are about 1 1/4" down. You'll need a long, skinny T-8 to get to them.
6) Unplug the machine and place it on it's back on a large white sheet of paper.
7) Remove RAM door, #2 Phillips x 2.
8) Remove RAM.
9) Remove 4 T-8s along bottom.
10) Remove large rectangular plastic bezel surrounding the whole machine, tilt up being careful not to stress iSight cables. You'll need to stretch it around the RAM ejection tabs.
11) Detach two iSight cables.
12) Peel up black stickers at lower corners of speakers.
13) Remove LCD screws, T-8 x 8. You'll probably drop a few, they're pretty easy to retrieve.
14) Remove two retaining screws on right hand LCD cable. T-6 x2 Unplug cable.
15) Remove LCD inverter cable, left.
Start unplugging everything connected to the logic board.
16) Unplug cable coming from right speaker. Note cable routing, it is the only one that's a little tricky. Also, note that the left one plugs in on the right and the right one plugs in on the left.
17) Remove right speaker. T-10 Note: left and right speaker screws are different lengths.
18) Unplug ODD blower cable.
19) Unplug ODD temp cable and lift up tape.
20) Unplug HDD blower cable.
21) Unplug the HDD temp cable.
22) Unplug the camera & mic cable.
23) Unscrew the clamp securing the airport card (has two antenna cables going to it, labeled PCIE), T-6 x 2
24) Unplug SATA cable.
25) Unplug Power cable, thick black plastic harness, socket.
26) Unplug ambient temp cable.
27) Unscrew the bluetooth card, T-6 x2.
28) Unplug CPU blower cable.
29) Unplug power button cable, 2 conductor, tiny cable, bottom left.
30) Unscrew left speaker, T-10, unplug from logic board, but just leave dangling, no need to remove cable completely.
31) Remove logic board screws. Be careful to segregate them, they have different lengths and different thread pitches and thread types. Some are machine threads going into metal, some are coarse threads going into plastic.
31a) Heat sink frame to case T-8 x 2
31b) Logic board to case T-8 x 3
31c) Screws at heat sink from arrows T-8 x 3
31d) Logic board at bottom near RAM slot T-8 x 2
32) Unplug ODD ribbon cable, be extremely careful. Release plastic tabs on each side to remove. Be sure it is fully and evenly seated when you put it back later.
33) Remove logic board with attached graphics card.
34) Unplug graphics card heat sink sensor cable at logic board end.
35) Remove graphics card screws 2 x T-6
36) Remove single screw from small L-bracket on heat sink 1 x T-6
Replace graphics card.
Reverse steps, put everything back together. Be careful not to pinch any cables when you put the logic board back in. When you put the LCD back in, if you can't get the screws to stick to the driver, use some glue stick from your kid's art supplies.
Test everything. You've disconnected every cable in the system.
I torture tested the machine with a space heater on it, 5 different videos of different formats playing at the same time. No problems.
I took a lot of pictures inside the machine. As soon as I figure out a good place to post them, I'll try to add a link here.
Good luck

Greetings!
I know this is in response to your post from over 2 years ago, but I was searching on Apple's site for the max RAM I can upgrade our refurbed iMac too and it brought up this post.
Oddly enough, I've been experiencing the same screen issues and locking up on our iMac as well. I was concerned it was a bad memory module, but now I'm thinking it's the same issue you found.
Because I bought this some 2+ years ago refurbed from Apple, I'm not surprised that could be the actual problem.
I've pulled this thing apart once to replace the hard-drive which crashed about a year ago, so I'm not totally new at opening it up, but this process you mention sounds pretty intense...just wanted to get your second take on it based on what I've done thus far.
Thanks again for posting this...it was an eye-opener as to what might actually be causing our issues with our trusted Mac!
Joshua

My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?

My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?
Thank. Simon

Brian - The batteries are fine and there has only every been one keyboard paired with it. We have tried my MacPro keyboard as well, and it will not even recognise that there is a discoverable keyboard nearby.
Thanks, Simon

I can't install CS 5.5 Production Premium on my new iMac. I no longer have the CD's to reinstall. I

I can't install CS 5.5 Production Premium on my new iMac. I no longer have the CD's to reinstall. I downloaded the software using this link from Adobe http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html . When I try to put my Serial Number in the error message is that it is not valid for this product. I have checked on my Adobe account and I have all the details previously stated here correct. Please help to resolve this issue. Thank you

AS per above
This was not helpful intact i think its just passing the ball
I still have the same problem as per above
What you have given me as a solution is for the basic and obvious, which I
already know
Again, here is my product and serial no
I want better help than a link to a page that asks whether I have the write
osx
Gees
5.5
Mac
19 Nov, 2011
<serial number removed by mod - kglad>

Ever since installing MacKeeper on my IMac I can no longer watch videos on YouTube, they stop in mid sentence and cannot be restarted! Could this be a problem with my Snow Leopard

Ever since installing MacKeeper on my IMac I can no longer watch my subscribed to videos on YouTube! They start very slowly and then stop mid-sentence and cannot be restarted! I am wondering if it is time to change to Maverick or try to get rid of MacKeeper. I purchased it because my email had been hacked and now I am wondering if it was a very unwise decision since experiencing these problems?
Is there anything that can be done to unstick the YOU TUBE videos?

Mackeeper is the worst pile of crap you can install. A search of these forums will tell you the same thing over and over.
Matt

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

I have blue and green vertical lines on my iMac which is no longer covered by Applecare. Is it fixable?

I have blue and green vertical lines on my iMac which is no longer covered by Applecare. Is it fixable?

What model iMac? Could be a failing video card but maybe not. Is it that way on every screen, startup to shutdown, any time the screen is lit?
Do you have an AASP nearby? Time to have an estimate made. Fixing it will likely be very expensive.

IMac no longer recognizes bluetooth after installing XP

I just installed XP using Boot Camp 2.0, and now my computer no longer recognizes the bluetooth internal card (not in XP or OSx). When I go to system preferences, the bluetooth icon doesn't even show up and even when I go to "about this Mac" and look under bluetooth it says "No information found." Any ideas? Both in XP and OSx I have gotten a problem code 43...what does that mean??
This is my first Mac...so this is all new to me, but any advice would be greatly appreciated!
Thanks in advance!
Brian

Hi. Thank you for your response. I actually didn't get to test it out because before going to bed, I shut everything down, unplugged it, and said a prayer. (All of which I had done earlier in various combinations, except the prayer part.) This morning I plugged the computer in, turned it on, held my breath, and plugged the MyBook in - it recognized it and I downloaded everything onto my iMac before it could change its mind.
I'll keep a copy of your reply so that I know what to do the next time I pull a stunt like this.
Thanks, again, for the help response.
~alison

Imac no longer recognizes external hard drive

my iMac no longer recognizes my external hard drive. An icon used to be on my desktop, at times it would disappear and come back, but it has remained elusive for the past couple of months and is NOWHERE to be found. It doesn't even show up in the Disk Utiity. I need my files!

Please Google, "Intel iMac SMC Reset" and follow the instructions. If the drive is OK this may solve it.

IMac G5 no longer recognizes external hard drive

I have a Western Digital 250GB external USB drive. Yesterday, my G5 no longer recognizes it. I've restarted the computer, restarted the drive, unplugged and replugged the USB cord etc...
It's like it no longer exists ! Please help

Does the drive turn on? Is the power brick working? Have you tried plugging it into another computer or another USB port? I know you have plugged and unplugged it, but do it several times in a row. Unplug, turn it off, plug it in, turn it on and unplug etc etc, repeat the sequence several times.
BTW, is it an iMac you have, or a G5 tower?

My iMac osx 10.4.11 no longer recognizes my iphone

I've been using my iMac for my iPhone 3GS for 2 years, suddenly it no longer recognizes my iPhone when I try to update it. I'd appreciate any assistance.

Try http://eshop.macsales.com/shop/hard-drives/External-Enclosures/
If you have question about any items on their page, MacSales has an extremely god technical support staff.
Allan

2006 Intel iMac with new Mac Mini?

I have a 2006 Intel iMac (MA200X/A) running Snow Leopard. It's finally gotten to the stage that it's running too slow to work on, so I was looking at the Mac Minis. Is it possible to use my iMac as a display for the Mac Mini?
The iMac only has mini-DVI so I was looking at the cables available and there's mini-DVI to either VGA or DVI, and then HDMI to VGA or DVI, would using the matching cables for each of those work?
(I can't really afford to spend at least twice as much buying a whole new iMac...)

No. The mini DVI port on the iMac doesn't support video in.
http://support.apple.com/kb/ht3924

I recently installed Lion on my iMac. Pages no longer has the "Save as" command in the File menu. Help!

I recently installed iOS 5 on my iMac. Pages no longer has the "Save as" command in the file menu. Can anyone help?

It's not you, it's Lion, Save As is gone.

Best way to transfer data between iMac early 2006 and iMac late 2012

What is the best way to transfer data between iMac early 2006 and iMac late 2012?

HI, is this for Migrating all data ove, or just File Sharing?
What OSX version is in he older one?
Do you have any backup external drive for the older one?

Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!

Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!

I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected. At least that happens with my camera. Good luck.

My 2006 24" iMac (6.1) no longer recognizes Tiger 10.4

Similar Messages

Maybe you are looking for