My (2008) macbook pro, running 10.5.8 runs for about 30 seconds and then goes into deep sleep mode. After significant difficulty awakening, it runs for 30 seconds and....start repeating here. It did this once before about a year ago.

.....and then goes into deep sleep mode. When it (finally) awakens....it runs for about 30 seconds and.....start repeating here.
And yes, I've shut dwn and restarted multiple times, rebooted in terminal mode and run fsck, rebooted and reset the parameter ram, yadda-yadda......
Anybdy got any ideas?

Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on Mac portables with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Still having problems? Replace steps 6 and 7 with the following:
Reconnect just the MagSafe power adapter.
Press the power button to turn on the computer,
Then reconnect the battery.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light may cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

Similar Messages

I have a new MacBook Pro Mid 2012 and it goes into deep sleep when I disconnect if from AC power.

I have a new 13" MacBook Pro mid 2012 and it goes into deep sleep when it is disconnected from AC power. I have to press the power button to wake it up. Is this a known issue or is there something wrong with the MacBook Pro?

There are a few threads about this around. Its a known issue for 2012 non retina users, not sure about Apple. It should not work this way and Apple has not put out an update to fix it yet. Check out these threads for some workarounds. I think I saw if you reinstall and don't update one of the updates you get normal functionality back. Otherwise there are some terminal changes you can make to make it operate mostly normally. I made some changes in terminal.
https://discussions.apple.com/thread/4512384
https://discussions.apple.com/message/20436126#20436126#20436126

Help: Macbook goes into deep sleep instead of sleeping

Any time my Mac is supposed to go into sleep, like when I leave it alone for 15 mins or close the lid, it goes into deep sleep (hibernates). How do I fix this?
Also, it started happening after I changed the starup disk from Windows to OS X through the boot camp control panel in Windows.

Just reset the SMB following these instructions: http://support.apple.com/kb/HT3964 and still having the same problem. However I realized two key things:
The computer goes into Deep Sleep mode whenever I tell it to Sleep (Even if I use the Sleep button in the Apple menu)
The above only happens when the power adaptor is plugged in. When running on batteries Sleep seems to work properly
While typing this up I just realized that a widget I have called Deep Sleep for dashboard might be causing my problems, and sure enough... it is. Apparently there is a setting on there that lets you make your Mac's "regular" sleep mode Deep Sleep and I probably turned this on without realizing it. For anyone who's reading this I'll try to keep you posted on if this fixed the problem or not... if I don't post anything else on here you can assume it's fixed. Watch out if you use the Deep Sleep widget
Message was edited by: musicmannn

I updated my iMac to lion and now when i leave my desktop and it goes into stand by it like a picture is taken of the screen and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopar

i upgraded my iMac to lion and now when i leave my desktop and it goes into stand by mode, its like a picture is taken of the actice desktop and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopard. does anyone else experience this and is there a fix?

I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard. It was totally updated with the latest from Apple when I bought and tried installing Lion. The upgrade failed, shot my OS and I couldn't boot. Had the constant spinner on a grey screen.. did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck. Crashed my system one too many times. I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac. I have the stuff running on my Mac Pro but have yet to notice anything impressive. I've always used F3 and really didn't require Mission Control. Just open you app folder for launch pad... duh? I use the hot corners anyhow. As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow. I don't like the new Mail either..
As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

Hi Guys 'n' Gals! I have a problem with my computer going into 'Display Sleep' mode and it actually goes into full sleep mode. anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never go into computer sleep

Hi Guys 'n' Gals!
I have a problem with my computer not going into 'Display Sleep' mode but actually goes into full Computer Sleep mode. Anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never' go into 'Computer Sleep' within the 'energy saving' section!
Any ideas guys?
Miffa!

Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.

My 2008 MacBook Pro screen has now got interference across the whole screen. It looks similar to a pre-cable interference from bad reception. What is the problem here?

My 2008 MacBook Pro has interference across the full screen. It looks similar to a pre-cable TV screen with bad reception. Any idea of what the problem might be?

Took it to the Apple Store, they determined it's my screen that's messed up (they connected to another monitor, and since the lines didn't mirror onto the monitor it couldn't have been my GPU making the lines but rather the screen itself), so not connected to my wifi issue or a potential logic board issue, so I'm going to get my screen, wifi card, and trackpad (it's been failing too but that wasn't urgent at all) replaced for $330 using their flat-rate repair service which is much better than I imagined in terms of price.

My 3rd generation ipod touch shut off but now won't charge and is not recognized by my computer. All it shows is the black screen with the apple logo. It did this once before and after letting it sit for a day it charged. I tried this again but nothing.

My ipod touch 3rd generation shut off when the battery died. When i tried to charge it but it would not charge and it wasn't recognized by my laptop. This happened once before and it charged after sitting for a day. So I tried it again but it didn't work. I don't know if it is still covered, I got it last july as a replacement for one that broke. Help!! Please!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My Macbook Pro will not boot up. I can hear the sound that it has started and then goes into an infinite loop.

My Macbook Pro will not boot up. I can hear the sound that it has started and then it goes into an infinite loop.

What model MBP and which version of OS X? Sounds as if the hard drive may have failed. If you have an installation disc, try booting with it. If your machine came with Lion or Mountain Lion, try booting to the Recovery partition - Command and R keys held down while booting.
Clinton

My iPad colors are fuzzy with lots of reds and purples. Did this once before and cleared up. This time it won't clear up. Any suggestion?

My iPad colors are fuzzy with lots of reds and purples. Looks like my digital camera when it needs to be recharged if that helps describe the issue. Can anyone help?

Next step is to back up and restore via iTunes. If the problem continues, restore as a new device and test. If the problem is solved, there is some kind of corruption in your backup file. If it continues, take it to an Apple store for evaluation of a possible hardware problem.

When i stay on another tab for a long time and then goes back to the facebook tab, firefox will open the tab for about 5-10 seconds...it looks like a lag

if i use firefox and open tabs, the moment that i go back to the facebook tab, it would take firefox 5-10 seconds to open the facebook tab.it's really annoying

That is most likely caused by Firefox releasing memory used in that tab to minimize the memory that is currently in use.<br />
This includes memory that stores the DOM tree and that tree needs to be rebuild to allow navigation scrolling and clicking items on the page.<br />
On complicated pages that have a lot of elements this can take a few seconds.
See also:
*http://blog.kylehuey.com/post/21892343371/fixing-the-memory-leak about:khuey - Fixing the Memory Leak

HDMI input options into early 2008 Macbook Pro

I have an early 2008 macbook pro. I'm looking to connect it to a casio digital video camera with hdmi output. What are my options for input into my macbook? Ideally, I would be able to capture live video from the camera into a golf video analysis program. I've read that the dvi port provides the highest quality video transfer. What kind of dvi cable do I need for the early 2008 port, if it allows for input at all? Would firewire or USB be a decent option? Do I need some sort of conversion card for video intake? Thanks for any advice...

Yes, if I understand you correctly, You can certainly transfer footage from a video camera to your MacBook Pro and view it there: you just can't have, for instance, a live video feed.
There are a number of ways to transfer data from a video camera - iLink (Firewire) was once an option, and may still be on some cameras, USB, etc.
Good luck,
Clinton

MacBook Won't go into deep sleep by itself

I recently noticed that although my monitor will go to sleep after the specified idle time the hard drive never goes to sleep on it's own. The indicator light never goes into "pulse mode". The strange thing is I think it worked fine before I did the recent updates.
I can put it to sleep through apple menu, CMD:OPT:DEL, or by closing the lid. Those methods all work fine but if left unattended it never goes into deep sleep and eventually drains the battery completly.
please help.
Thanks,
Chris
MacBook 13" 2 GHz Mac OS X (10.4.7)

It doesn't seem to make a difference if it's plugged in or not. Closing the lid puts it into deep sleep. Unplugging or plugging it in while it's asleep doesn't seem to effect it.

I to use iphoto library manager to save corrupted iphoto and each time it saves some and the first time it brings up iphoto, iphone goes into "not responding" mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2.

I've had issues with my iPhoto "not responding" and as a result I am attempting to save my photos to an external hard drive using iPhoto library Manager but each time I start the program it saves some, and then when it starts iPhoto, iPhoto then goes into not responding mode. Using mac book pro, iphoto 9.5.1, and maverick 10.9.2. I have completed all of the photo library first aid steps several times, but it makes no difference, iphoto eventually goes to "not responding." Initial issues started with Time Machine back ups stopping because of iphoto. Thanks......

Do you have a back up?
If you're just trying to recover the photos you can do that much more simply:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Originals' or 'Masters'. (varies according to the version of iPhoto)
Your photos are inside - these are the originals as imported from your camera.

My MacBook Pro doesn't accept CDs or DVDs anymore, but it did when I bought it 2 years ago. How can I get it to read disks again?

My MacBook Pro doesn't accept CDs or DVDs anymore, but it did when I bought it 2 years ago. How can I get it to read disks again?
My quess is that the new software just doesn't allow the disk drive to work. I would love an explanation why this doesn't work and some help getting it to work. It's really frustrating because I get a bunch of CDs from work and never get to listen to them on my MacBook.

Make sure the discs are free of finger prints. The optical drive cannot read a disc with smudges and dust.
Check Finder > Preferences > General
Make sure: CDs, DVDs, and iPods, is selected.

When I OCR two versions of the same document and then compare th documents in Acrobat Pro XI, I usually get the message that there are no changes to mark. However, I know there a quite a few number of changes. I raised this question more than a year ago

When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark. However, I know there a quite a few number of changes. I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents. However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked. When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?

OCR is only for recoginition of the image / picture of text provided by an scanner.
Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image or picture of text - it is the digital text. So, no OCR involved.
When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
Once OCR is performed it is the OCR output that is exported.
OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents".
Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
being processed with Acrobat Pro's Compare can certainly be done.
But - well you've described what can be observed.
Be well...

My (2008) macbook pro, running 10.5.8 runs for about 30 seconds and then goes into deep sleep mode. After significant difficulty awakening, it runs for 30 seconds and....start repeating here. It did this once before about a year ago.

Similar Messages

Maybe you are looking for