My 2010 iMac has just been updated to osx 10.9 Mavericks
My 2010 iMac has just been updated to osx 10.9 Mavericks & now runs very slowly. Has anyone experienced this problem? Any easy fixes?
The new update(Flash Pro CC release - November 2013) that has a fix for this OSX 10.9 buzzing sound issue is now available to you. This Flash CC update will update your flash version to 13.1.0.217.
You can update from the Adobe Creative Cloud application or from Flash Pro CC Help -> Updates menu.
You will more information on the update at: http://helpx.adobe.com/flash/using/whats-new.html
Thanks,
-Sujai
Similar Messages
-
My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?
Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario -
H. My iMac has just been stolen and I can't remember if icloud was activated. Is there any way of telling?
Welcome to Apple Support Communities
On a computer, go to http://www.icloud.com and log in with your Apple ID. If it lets you log in, you enabled iCloud. Then, choose Find my iPhone and check that your computer shows up. If so, Find my Mac is enabled and you can track the Mac if it's connected by Wi-Fi -
hi everyone, i've updated all software etc to ios 5.0.1 from ios 4.1 as it has taken me 1 year to figure out how do the update. Everything has been restored and working but i've been able to connect to my wi-fi but still won't let me use the internet, I have done the 'forget network' and re-connected back to my wi-fi but still no connection to the actual internet. Someone please give me some tips or hints. Thank you
Despite the WiFi sign you may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
We run a SBS 2003 Exhange box, however since an over-the-air update this particular handset has refused to recieve mail from Exchange (apparently Yahoo had issues too).
Authentication is fine, it will happily recognise the account if it is deleted and set up - once the user tries to recieve mail however it will annonce that the connection to the server failed.
We have several other devices on the same iOS version and others below which are working fine!
Mobile access is enabled along with all expected services with no errors being flagged in the event manager for this user - I'm not wondering what might be the cause! Something in his mail box that iOS 5.1.1 doesn't like?!
Short of a backup/restore of the device I'm can't see anything to help...It would worth your asking in the Final Cut Pro X forum - someone else may have experienced the same problem.
I assume you have already trashed Preferences/ByHost/com.apple.dotmac... (several files beginning with this) and (same path) com.apple.idisk - though I suspect the problem lies rather with the individual programs which are trying to access something on the non-existent iDisk. -
this means that my iphone cant be updated so i might loose all of my information on it!?
how do i get my computer to recognise it again?I keep getting this too.
I love how nobody ever replies solutions. It's ******* me off. -
My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?
Welcome to the Apple Community.
Yes, update first, Settings > General > Software Update.
Then navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from. -
I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydasOk... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options. -
My daughter's iPhone 3gs has just been replaced by Apple. When she tried to restore her backup files she was told to upgrade to itunes 10, but she can't because her Macbook is too old to run it. What do we need to do to get all her stuff onto the new phone?
Here's what I'd do, go back to the Apple store, take the phone & computer. Ask the geniuses how to fix this since they replaced the phone. You never know, they may just update the computer for free...its happened before...can't gurantee it will happen for you, but worth a try.
Otherwise, you're looking at purchasing a retail copy of Leopard, however if her computer can handle Snow Leopard you can purchase the $29 upgrade disk & install a full copy of SL. -
Hi there, my iMac has automatically been deleting files from my thumb drive when I try to open them. The lost files aren'tin the trash or anywhere else I can think of. Any ideas?
If one drive works and the other doesn't that points the finger at the errant drive. They are cheap, replace it. To check formatting right click it in Finder and choose Get Info and look for Format type. Finally do you eject it when removing it or do you just pull it out of the USB connection?
-
i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help
If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
http://support.apple.com/kb/ht1808 -
The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!
Hey there Luba_kalstad,
It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section down toward the bottom if needed:
Unable to locate a Wi-Fi network
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
Take care,
Sterling -
My daughters iPad has just been factory restored from the apple shop, she was using my iTunes account with her email. When trying to create her own iTunes as she is the correct age it has come up that her email is already being used. How do we do this with he same email address
Hello spooner68,
Thank you for the details of the issue you are experiencing when trying to create an Apple ID for your daughter. Because her email address is associated with your Apple ID, you are receiving the message that the email address is in use.
To remedy this, you will have to first remove her email address from your account using steps 1-3 of the section titled "How to add an additional email address that is already associated with another Apple ID" in the article below and then attempt to create her Apple ID with her email address:
How to add an additional email address that is already associated with another Apple ID
If you have an email address that is already associated with another Apple ID, you may need to remove it from your other Apple ID before you can add it to your preferred Apple ID.
Sign in to My Apple ID with the Apple ID that has the email address already associated with it.
Find the email address that you want to move to your preferred Apple ID, then click Delete.
Click Save Changes, then click Sign Out at the top of the page.
You can find the full article here:
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.
If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
Or you could move them to the internal drive and double-click on them once the move is completed.
To create a single catalog file from multiple ones, you could use File->Import from Another Catalog -
hello,
After installing the Adobe reader, I got the following error message:
Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendorFor AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).
Maybe you are looking for
-
Motion 1 Crashes on Intel Core
hi There When i run Motion V1 on my new Intel 1.83GHz Core duo, it loads to the motion screens before it quits. Any help? cheers scott
-
Use of text element in function module
hi friends what is the use of text element i.e list headings, selection texts,text symbols in a function module. where a can see these things after giving some text into it and activated. kumar.
-
Can I use the sub from my Gigaworks 700s with a receiver?
The Sub from this speaker setup with this receiver. Someone said I could purchase a 3.5mm to RCA adapter like this and it MIGHT be possible to connect the 3.5mm to the Subwoofer/Center input on the back of the subwoofer and then try both of the RCA's
-
Dear All, I need one clarification on Opening balances of all Vendor, Customer and G/L balnces uploanding Please advise me proper procedure in SAP 6.0 Thanks Sudhan
-
Deficiency in Reports to Support OLE
Todays users require the ability to format (i.e., bold/italicized/underlined text, spell-checker) and spell-check text like what can be done in MS WORD. Beyond that users need to be able to include graphics in their comments (.e.g., gif, jpeg, etc) j