My 2010 iMac with Mavericks 10.9.2 is very slow. How do I fix?
I have tried the usual stuff: disk permissions repair, SMC reset, PRAM reset, dragging caches to trash, restarting computer, etc. My internet connection and speed is good. Computer is mid-2010 i3 iMac with 10.9.2 OS, 12GB RAM, and there is plenty of unused space on my HDD.
The computer is very slow to start applications and load web pages. I ran Etresoft as some have suggested and the report is below. Any help is appreciated. Thanks.
Hardware Information:
iMac (21.5-inch, Mid 2010)
iMac - model: iMac11,2
1 3.06 GHz Intel Core i3 CPU: 2 cores
12 GB RAM
Video Information:
ATI Radeon HD 4670 - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:6:34
Disk Information:
WDC WD5000AAKS-40V6A0 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (172.87 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
FireWire Information:
Iomage HDD unknown_device 800mbit - 800mbit max
disk1s1 (disk1s1) <not mounted>: 32 KB
Time Machine (disk1s3) /Volumes/Time Machine: 1 TB (125.26 GB free)
Thunderbolt Information:
Startup Items:
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.cisco.anyconnect.vpnagentd.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
[System] com.cisco.anyconnect.gui.plist 3rd-Party support link
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.hp.messagecenter.launcher.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.rosettastone.rosettastonedaemon.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] net.optimum.iptv.optimumapp.agent.v3.plist 3rd-Party support link
User Login Items:
Microsoft Database Daemon
Dropbox
Internet Plug-ins:
DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 3rd-Party support link
o1dbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
Google Earth Web Plug-in: Version: 6.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.2.1.11 3rd-Party support link
OfficeLiveBrowserPlugin: Version: 12.3.2 3rd-Party support link
PandoWebInst: Version: 1.0 3rd-Party support link
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.8
CitrixICAClientPlugIn: Version: 11.2.0 3rd-Party support link
googletalkbrowserplugin: Version: 5.1.7.17873 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
InvisibleHand: Version: 3.9.37
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Citrix Online Plug-in 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Java 3rd-Party support link
MacFUSE 3rd-Party support link
Old Applications:
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
TurboTax Premier 2011: Version: 2011.r17.007 - SDK 10.4 3rd-Party support link
iSHS: Version: 1.0 - SDK 10.0 3rd-Party support link
/Users/[redacted]/Downloads/iSHS.app
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 303.96 GB
Destinations:
Iomega HDD [Local] (Last used)
Total size: 931.39 GB
Total number of backups: 147
Oldest backup: 2011-10-26 11:07:35 +0000
Last backup: 2014-03-12 00:53:28 +0000
Size of backup disk: Adequate
Backup size 931.39 GB > (Disk used 303.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
9% Google Chrome
6% WindowServer
3% mdworker32
2% EtreCheck
1% mds_stores
Top Processes by Memory:
135 MB com.apple.IconServicesAgent
123 MB PluginProcess
123 MB Safari
111 MB com.apple.WebKit.WebContent
98 MB mds_stores
Virtual Memory Information:
9.28 GB Free RAM
1.66 GB Active RAM
303 MB Inactive RAM
783 MB Wired RAM
380 MB Page-ins
0 B Page-outs
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.
Similar Messages
-
IMac running very slow; how can I fix it?
My iMac is running so slow, I can hardly use it all. All kinds of spinning balls, etc. I don't even know where to look to diagnose. If I restart, it will be faster for awhile. Both Safari and Firefox are running very slow...or not at all. I have repaired permissions and hard drive. I have dumped permissions for Safari and Finder and anything else that seemed involved. I checked my memory....this is the report I got. Does the fact that the first one say "disabled" mean anything? I will appreciate help you can give me.
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0xCE00000000000000
Part Number: 0x4D342037305432393533455A332D43453620
Serial Number: 0x772E336D
BANK 1/DIMM1:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2C00000000000000
Part Number: 0x3848544631323836344844592D3636374531
Serial Number: 0xE00CB01CQuestions and Answers:
How full is your Mac's hard drive? * Capacity: 248.92 GB. * Available:175.18. *Used 73.75GB on disk.
How many applications do you run simultaneously in the background while working in another application? *Not many. I try to remember to quit open apps especially when the computer runs slowly. I always have open Calendar, Mail, Safari.
Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X. *I have an anti virus but I do not let it run. I turn in on to check files and email now and then.
Do you run any "crapware" like Mackeeper or any other type of so called hard drive "cleaning" apps? *No, I have none.
One thing I notice is that when I turn it off at night, it runs very well the next day until I've been on it for a few hours then it gets really bad. Last night, it wouldn't work at all so I gave up and turned it off. This afternoon I turned it back on and it has been working very well ever since.
Thanks for looking at this. I have never checked my hard drive before so I didn't know how much it had on it, but it doesn't seem like it is too full. -
Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas? -
I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so. -
How can I use Aperture 3 on my new iMac with Maverick?
How can I use Aperture 3 on my new iMac with Maverick?
Do you own a copy of Aperture, perhaps bought for another Mac?
If you have not bought Aperture, you need to buy it from the AppStore.
But if you own Aperture and have it bought from the AppStore on another Mac, sign into theAppStore on your new iMac with the same AppleID you used to buy Aperure on your other Mac. Then look at the "Purchased" tab of he AppStore. It show Aperture, with the "Install" button to the right. Simply press the "Install" button and download it to your new iMac. Or if you have bought Aperture on a CD/DVD, run the installer from the CD/DVD on your new mac and immediately run software update to upgrade the Aperture 3. version to version that will run with Mavericks.
Léonie -
Fusion Drive on a 2010 iMac with 2tb HDD & 256gb SSD
Hi,
well basicailly the title says it all!
I have a 2010 iMac with the 256gb SSD and 2TB HDD which to me seems like it would be great option for the Fusion Drive...
Does anyone have any ideas on how I could make the drives work like the new Fusion Drive?
I've seen the Macworld Tutorial on a DIY Fusion Drive but i'm still not sure if doing that will work in the same way as the preinstalled 2012 iMac Fusion Drive... I know that Mac OSX will treat the combined drives as one, but in terms of moving files depending upon their usage is another matter.
If the Macworld step by step is followed will Mountain Lion handle frequently used files / apps like the apple presentation states or will it just use the drives as one and not increase the performance of my machine?
Any help on this would be much appreciated, especially if anyone has followed the Macworld steps etc!
Thanks
DarrenThanks fir the reply, I thought with the fusion drive the SSD and HDD were two seperate storage devices seen by OSX as one volume, and the software determins where the files most used will be placed and accessed from.
I've read a bit about this here;
http://macs.about.com/od/diyguidesprojects/ss/Setting-Up-A-Fusion-Drive-On-Your- Current-Mac.htm
but would be great to hear first hand experience!!
With this DIY approach it appears that the same functionality of the 2012 iMacs is achieved but simply not using the older Disk Utility, but a newer version only included on the newer models... -
I have a 2006 iMac that I've upgraded to each new os as they came out. I just wiped it (for the kids to use, I have a new iMac with Mavericks) and reintalled Tiger from the original discs. I want to get it back to Lion - which I purchased from the Mac App Store. But Tiger doesn't have the App Store and I don't have the discs anymore from the intermediate versions. I tried downloading Lion from the new iMac but it's not available...
Any ideas?To get to the App Store, you need to upgrade the Tiger machine to Snow Leopard.
-
Unable to install of Adobe Premiere Elements 10 on new iMac with Mavericks sw
get this error message everytime I try to install premier elements 10 on my new imac with Mavericks sw.
Followed suggestion and tried to do install Elements 10 with Mac in safe boot mode, same failure messagePlease re-post your question at this link:
<http://forums.adobe.com/community/premiere_elements?view=discussions>
This particular forum is for Photoshop Elements while you need Premiere Elements.
Good luck. -
2010 iMac with thunderbolt display
Guys,
I'd like to extend my 2010 iMac with a second 27" display. Initially I was considering going for a 27" thunderbolt display as this is the only display type that us still for sale. However, from browsing the forum, I understand that the 2010 iMacs have a mini display port which is unable to drive a thunderbolt display, is this correct? If so, what are my options for a matching 27" monitor?
I was thinking of the following options but I would like to have someone confirm the possibility.
1) use a mini display port to thunderbolt adapter: does this exist? Would it work? If not I would say apple removes additional sales because people are not going to update their iMac just for a thunderbolt port, they will get a non apple monitor to play nicely with their iMac.
2) more expensive, but use a new thunderbolt iMac and use the old iMac *** an external display: I read on the forum somewhere that thunderbolt devices can output to mini display port displays using mini display port cables. Is this true? If so, would I be able to expend my desktop this way?
3) can I still buy a new mini display port 27" cinema display to match my 2010 iMac?
ThanksThe 27" Cinema Display is still available new from the online store, would be perfect for you. Also, don't be afraid of the refurb models available as well. Good way to save some money and get the same warranty coverage as new. Typing this on a 27" refurb iMac. Love it and saved a ton.
-
how can i open a downloaded mp4 file that is zipped? Witch will not open. And, Convert that mp4 to play on my iMac with Maverick osx ? I there an app or apps i need to buy ?
You should be able to open the zipped file by double clicking on it.
http://www.videolan.org/vlc/index.html
This link is for a VLC Player it can play just about everything.
Cheers
Don -
I cannot transfer my Ical on my Imac with Mavericks 10.9.2 to my iphone 4 with the latest operating system. I get error message "403" when it attempts to upload to the cloud before transfering to the iphone. I've tried shutting down the computer and iphone but it has not been successful. There is plenty of data available on the icloud as I've not used it for anything else. Any advice would be greatly appreciated. Thank you.
KevinHello kmcnern3,
Thank you for providing the details of the calendar issue you are experiencing with your iMac and iPhone. I recommend following the steps in the section titled "Troubleshooting on OS X" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension
Thank you GeeD. I'm still stymied.
I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
When I open iMovie 10.0.8, the Events and Projects Folders are empty:
When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
[As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
Back to the update of version 9.0 to 9.0.9.
Presumably because I have version 10.0.8 installed, I got this alert box:
So, I cannot update version 9.0
and I cannot "Update" the Events and Projects created in version 9.0. -
I have CS4 Photoshop on my iMac with Mavericks. I am going to upgrade to Yosemite, and don't think it is compatible with CS4. Do I get the full Photoshop CC version for $9.99 a month, or do I need to buy any additional things?
Thanks, I was thinking so. I installed my CS4 from a CD in 2008, and it looks like Adobe has taken another approach to selling their products. I'll be downloading CC Photoshop a little later today.
cw
From: Brucgovn <[email protected]>
To: Chris Warot <[email protected]>
Sent: Saturday, May 2, 2015 11:27 AM
Subject: I have CS4 Photoshop on my iMac with Mavericks. I am going to upgrade to Yosemite, and don't think it is compatible with CS4. Do I get the full Photoshop CC version for $9.99 a month, or do I need to buy any additional things?
I have CS4 Photoshop on my iMac with Mavericks. I am going to upgrade to Yosemite, and don't think it is compatible with CS4. Do I get the full Photoshop CC version for $9.99 a month, or do I need to buy any additional things?
created by Brucgovn in Adobe Creative Cloud - View the full discussionYes, you will get full version Photoshop cc 2014 as well as Lightroom CC 2015 with Photography plan If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7505683#7505683 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7505683#7505683 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Creative Cloud by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Is it possible to download and use Photoshop CS2 on Imac with Mavericks OS?
This is not a photography question. It is an application specific question, Please post in the Photoshop forum.
Photoshop General Discussion
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions. -
I recently purchased an iMac with Maverick system. I want to install my Photoshop CS5 on it, is that okay?
Then I want to update it to CS6 without the iCloud purchase monthly (don't want that, want a one time charge)???As per System requirements | Photoshop, PS is not officially supported on Maverick and you might face several compatibility issues as well. However, we have many users who are still using CS5 on Mavericks. So, if you want you can give it a try and check it for your self.
As far as CS6 is concerned, you can get PS CS6 perpetual version easily from Adobe.com Creative Suite 6
Hope that Helps!
~ Arpit
Maybe you are looking for
-
I loose my windows xp. Install a new Hard drive with windows 7 and a new Firefox. I have acess to old HD data. Where can I get the Firefox profile with old bookmarks?
-
Have 2 adjacent divtags one above the other with zero margin between. I click inside top one and insert image. Then try to click inside lower one to insert another image but cursor does not appear. I can select the div by clicking its border but can'
-
PORTAL DOESN'T WORK (error:WWC-41439) after CHANGED DOMAIN NAME OF MACHINE.
machine transferred to other location and domain name got changed.I did following 1)changed the old domain to new domain name in jserv.properties file and also in the httpd.conf file. 2)I figured out that intable PORTAL30_SSO.WWSEC_ENABLER_CONFIG_INF
-
Problem with the standard RMDATIND
Good afternoon I say that tango is a problem with the standard load of the material RMDATIND where the burden me all the good materials but in the CAT type of feedstock me what brand as subject to lot but I do not step parameter that the program that
-
How to change DTP Overall Status from Yellow to Red
Dear all, if I choose "set overall status automatically", how can I change DTP overall status when I want to stop the DTP running? Thanks.