My 2010 Macbook Pro won't turn on...

I left my Macbook Pro alone for a moment and when I had returned it had shut down on it's own and wouldn't turn back on.
(MagSafe unattached)
1. It will not turn on.
2. Battery Indicator - When pressed displays nothing. Computer is super, super dead.
(MagSafe attached)
1. Still will not turn on.
2. MagSafe light maintains a constant Green Light.
3. Battery indicator - When pressed displays one light that flashes really fast.
4.Sleep indicator light pulses once per second.
5. help plz :- /
I tried the control, option, shift, power button reset. It stopped the sleep indicator light from flashing for about 10 seconds but that was it.
I haven't removed the battery yet.
I've never replaced or messed with any of the RAM.
I've never even opened it.
Any suggestions?

Hey dude all this mens is that one of the components is disconnected : for example you RaM your hardrive etc.
This usually happens when you drop your laptop or hit hard etc. Just take it to a mac store and thy will know what was unplugged and then plug it back for you its no biggie.
This happne dto me like three times already. lol i dropped laptops alot lol.

Similar Messages

My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

Mac OS X: Gray screen appears during startup

My MacBook pro won't turn on all the way gets to the apple with the spinning wheel underneath and that's all I need help asap

My MacBook pro won't turn on it just gets 2 the spinning wheel and keeps spinning

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If this doesn't work then you will need to erase the drive and install Snow Leopard from scratch:
Erase and Install Snow Leopard
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. When completed quit DU and complete the Snow Leopard installation.

My MacBook Pro won't turn on although the battery life is showing full

My MacBook Pro won't turn on although my battery life is showing full ,

Go step by step and test.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step 5
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

My MacBook Pro won't turn on. What keys do I use toed last week.

My MacBook Pro won't turn on. What are the keys to reboot? This happened last week.

http://support.apple.com/kb/HT3964 if you haven't replaced the PRAM battery in the last 4 years.
If you have:
http://support.apple.com/kb/HT1379
Note, the PRAM battery is not the normal replaceable battery for power. It is the equivalent of the PC CMOS battery.

My MacBook Pro won't turn on, what's wrong?

My MacBook Pro won't turn on. What's wrong?

gobetty wrote:
My MacBook Pro won't turn on. What's wrong?
Depends upon what you mean by it not turning on, there are various causes.
Is the power button pressed and nothing happens? Disconnect all other devices, then a SMC and NVRAM reset.
Is there a white screen and nearly nothing? A hosed EFI firmware.
Is there a grey screen and a loading bar that gets stuck? Either a failed firmware update or corrupted drive/OS X.
Is there a grey screen with a spinning wheel? Bad third party or Apple at boot kext file.
Are you loading but not able to log in? Possible corrupt third party software designed to startup upon login.
..Step by Step to fix your Mac

My macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

my macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

Might be a problem with the adapter.
Help here > Apple Portables: Troubleshooting MagSafe adapters

My macbook pro won't turn on without any reason?

my macbook pro won't turn on without any reason, is there any solution in this case?

You need to hit the "reply" button on post to whom your responding too, it's hard to tell if your responding to me or someone else.
small button on the side of the computer and didn't lightting up( no reponse at all). is their any problems do think with the battery?
Usually if your battery is dead because it wasn't charged you can do the SMC Reset and then check the Magsafe if it's connected and showing the orange light, then let the battery charge up.
Once the battery charges up, the computer will boot normally and then you have to reset the PRAM, time, date etc.
https://support.apple.com/kb/TS1365
Magsafe issues: https://support.apple.com/kb/TS1713 https://support.apple.com/kb/TS4127
*PRAM Reset http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
What's store in PRAM https://support.apple.com/kb/HT1242
Hardware Test
https://support.apple.com/kb/ht1509

I have 12,000 photos on iphoto and my macbook pro won't turn on...gray screen goes to blue screen and that is it...HELP

I have 12,000 photos on iphoto and my macbook pro won't turn on...gray screen turns blue and that is it. HELP!!

Run through this list of fixes
Step by Step to fix your Mac
You can do this to copy and remove files from the non booting internal
Create a data recovery/undelete external boot drive

My macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on.

my macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on. i don't know how to get it to progress past this loading page.

Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you are not using Lion, Mountain Lion, or Mavericks then use the following procedure:
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

MacBook Pro won't turn on even with green light on charger

i have a 2010 MacBook Pro. The battery has been permanently dead for years but it still turned on as long as I had the charger connected. Eventually the charger stopped working so I bought a new one. The light is green on the charger but the MacBook won't turn on now. I tried that reset thing as well as opening up the bottom and disconnecting and reconnecting the battery and that didn't worn either. I pressed the button on the side and there's green flashing lights so its definitely getting power it just won't turn on. I don't know what else to do at this point.

icychill69 wrote:
I tried that reset thing
Was that 'reset thing' a SMC reset?
http://support.apple.com/en-us/HT201295
If so, a new battery may be the cure but bring the MBP to an Apple store genius bar for a definitive evaluation first.
Ciao.

MacBook Pro won't turn on, but hear fan noise

My MacBook Pro, (2010 I think) won't turn on.
The power cord is working. I've tried two cords and get a a green indicator light when power cord is plugged in to computer.
With the power cord still plugged in, when I press the button to check the battery charge level all of the lights flash green.
With the power cord still plugged in my white sleep light on the front of the laptop is flashing.
When I remove the charger from the computer all of the battery charge indicator lights flash once.
When I remove the power cord and press the button to check the battery charge level nothing happens, no lights at all. White sleep light doesn't flash either.
When power cord is plugged in and I press the power button I can hear the computer trying to turn on, or something is working away inside. I don't hear the chime tho so it isn't starting.
Any help would be appreciated.
Thank you, Lori

Please make a Genius Appointment and take it in for service.

2010 Macbook air won't turn on?

I have reset the nvram/pram and the smc? what should I do.
The computer doesn't respond to the power button when pressed.

This was from another thread
2014 Apple Macbook MD760 - Won't turn on
where Carolyn Samit suggested for the poster to do go here
Troubleshooting: My computer won't turn on - Apple Support
A long thread here
My MacBook Air (2013) won't turn on
and one here
Macbook Air Mid 2010 would not turn on

Help - MacBook Pro won't turn on

Help - my macbook pro will not turn on even though it is plugged in. Holding down the power button is ineffective. The power cord has the green "charged" light, but when I plugged it in, it wasn't charged and never did charge (the light never was orange). The computer worked perfectly this morning.

Will it not turn on at all or do you just get a gray screen?
If a gray screen, look at this:
https://discussions.apple.com/docs/DOC-5282
If it does not turn on at all, try a SMC reset:
http://support.apple.com/kb/ht3964
If the reset fails to bring life to the MBP, make an appointment at an Apple store genius bar for a free evaluation.
Ciao.

MacBook Pro won't turn on and just beeps. What's wrong?

My Mac book pro won't turn and instead continues to beep three times, pause and repeats itself. What's wrong?

3 beeps is a RAM problem.
you can try resetting the SMC and PRAM and see if it helps
Or reseat the RAM
or run the AHT
Genius reservation http://www.apple.com/retail/geniusbar/
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

My 2010 Macbook Pro won't turn on...

Similar Messages

Maybe you are looking for