My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion.
I have it on upper left corner but it take the whole computer to sleep, no way to turn just the display.

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Similar Messages

Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG

IPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

iPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

Apple TV remote doesn't work with my 4s anymore

Why does the Apple TV remote app not work with my 4s anymore?

Hi capoconstruction,
If you are having issues with the Remote app on your iPhone, you may find the following article helpful:
Apple Support: Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
http://support.apple.com/kb/ts1741
Regards,
- Brenden

IPhone 3G ver 3.1 - spotlight doesn't work with accessory connected anymore

Hello,
I've been using iPhone 3G for quite a long time now and everything was fine until a recent update to OS ver. 3.1... I've noticed, that spotlight doesn't work now as it worked before... The thing is that I'm using iPhone as a phone and a source of music in my car. I connect it to Pioneer car audio system via USB. Before 3.1 update I was able to search for a song in spotlight and when I tapped it - it just played via car speakers. Now it doesn't do anything. I keep tapping, but nothing happens. The only way to play a song - disconnect iPhone from Pioneer, find song in spotlight, tap on a song to launch it and connect iPhone to Pioneer while the song is playing.
Well, I have a workaround, but it requires both of my hands... But it's kind of unsafe to do so while driving... Could someone confirm spotlight working while connected to any accessory?.. Maybe I'm the only one having this issue and iPhone restore would help?.. I just don't want to restore without any reason...
Thanks in advance for your answer.

Hi to the forum. This is my first post - ever!
It's taken me 25 years of Apple equipment purchase and enthusiastic advocation to get to this point.
And what has got me here? 'The GPS on my iPhone 3G has doesn't work'. If you Google this statement you get 12 million hits. It seems to me that's probably 12 million people who have a problem with an Apple product they've purchased.
I've read a lot of the solutions that other users have come up with - dozens of different ones. I've updated the iPhone software as soon as I can, I've been patient, I've given Apple chance to sort it out. I've even gone back to printing out Google maps onto paper (remember 'paper') and taken those out with me in the car to find my way around town.
However - the southern hemisphere summer is coming and I want to use the (totally brilliant) Navionics chart/GPS App on the boat. No chance. According to the iPhone we're in Africa not New Zealand.
So what to do? I can't find any 'official' info from Apple. I've no idea how the politics of these situations work - and I don't care! 12 million hits can't be wrong. Apple needs to tell it's users what is happening (even if they're still working on it), and when we can expect a fix.
Come on Apple, keep us in the loop - we love your products - and we want to keep advocating for you!
PS - this is the best place I could find to have ths little discusion - if anyone has a more direct line to God (err I mean Apple) please let me know!

HT6030 Unread mail count still doesn't work for any mail accounts after installing the Nov. 7 Mail fix. I deleted Gmail from my Mac Mail so that's not the problem.

I still cannot get an Unread Mail count in the Dock even after installing the the Nov. 7 Mavericks update. I deleted my Gmail account from my Mac, so I know that's not a problem. I checked the Mail preferences, and thay is configured correctly. Any suggestions?

Point noted re multiples posts [ there were loads of typos in previous] . Your previous reply may indeed be one way of solving my problem. Thanks .
Nevetheless why does Apple prodcue "updated " software which isnt properly comptiable or tested; with the result that it now doesnt work well with Gmail when the prevoius version worked fine. You would think an update would at least work with Gmail as well as the prevsoius version did. G mail is very widely used, so they, Apple, and probably Google too are shooting themselves in the foot if they can't make the software compitable,

I have an iMac Intel 2 Duo with Mac 0SX Snow Leopard downloaded. Can I upgrade to the new mountain lion

I have an iMac Intel Core 2 Duo with Mac OSX Snow Leopard installed. Would it be ok to download the new Mountain Lion?

Your iMac needs to be a mid-2007 or newer model. See this page for specs supported, and assuming you meet them, you can upgrade from Snow Leopard to Mountain Lion (see step 2 on the linked page).

Office 2011 Mac doesn't work with OS X Yosemite

Who can help me with that problem. Was talking to the Microsoft hotline and they couldn't solve the problem. It doesn't really launch anymore. It doesn't open properly and looks like frozen.

To follow up with another question. I was looking into uninstalling office and they say:
Step 2: Remove the Microsoft Office 2011 folder
On the Go menu, click Applications.
Drag the Microsoft Office 2011 folder to the Trash.
I do not know what they mean by the Go menu; I cannot believe how little I know .
I hope you can help.
Waiting to learn what to do next.

HP Scan doesn't work with HP LaserJet 2840 after upgrade to Leopard

Small bug mucho irritating.
I can't scan documents anymore. The program starts but doesn't give med a scanning window so it's no use at all. The problem is the same on my Intel based MacBook.
Is there a work around? I've seen various solutions by starting the program with rossetta on intel machines but it's not the problem in my case.

Can you elaborate? I'm going through this right now with my HP printer.
It worked fine with Tiger. Worked fine with Leopard when I upgraded. However, when I had to do a complete erase and install of Leopard to try and fix a Mail issue, the scanning no longer worked.
I've escalated with HP and they tell me I am out of luck and can not do scanning (particularly multiple page) to a clean install of Leopard (only if upgraded from Tiger).

Cups doesn't work with lp command anymore?

I can print a testpage but when using the lp <file> command my printer starts to spit out emty papers and some papers with a few characters on them. The error log says E [29/Aug/2010:14:02:12 +0200] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported. Whats the CUPS problem now? I'm running Openbox on a x86_64 computer.

jai134 wrote:Thankyou. I have now antiword installed. I have tried to convert to .txt and print it. No problems. Can you explain for me how to convert it to .pdf or .ps. I don't understand how to make antiword use 8859-1 instead of UTF-8. My default locale is sv_SE-UTF8 but I have the 8859-1 also. How can I tell antiword to use it?
man antiword
is your friend. It should pretty self explanatory.
Haripeddi wrote:I have installed antiword. And am able to convert doc -> txt and doc -> pdf. But headers/footers of word document are not getting converted in txt/pdf files. Can anyone help me in this regard?
Of course the rendition antiword makes is just an approximation of the word document. If you want exact output you would have to ask your contacts to send you pdfs output directly from Microsoft Word.

ITunes 10.4.1 doesn't work with my keyboard anymore.

I used to use mmkeys.dll before to use the media keys on keyboard which is a 'Microsoft Wireless Keyboard 3000 v2.0' but now I can't use the media players without the iTunes in like control or whatever (not sure how to call it, but its when my iTunes is like 'in front' of the other programs I have in use, and like I can control it and stuff, sorry for my stupidity >_>).

One of the latest updates broke media keys. Apple "fixed" it by making it so you can use media keys when itunes is the active program, but they didn't fix it for when itunes is in the background. Unfortunatley, no one needs to use media when itunes is the active window. Logitech keyboards got a fix, but everyone else is stuck until a real fix comes out.

Sound Blaster omni 5.1 doesn't work with Yosemite 10.10.1

Hi all! My SoundBlaster omni 5.1 doesn't work with Yosemite 10.10.1 (installed driver for Yosemite 10.10). Equipment in system is displayed properly, like "Sound Blaster Omni Surround 5.1". And SB is set as active. Volume controller is active (system shows volume adjustment). But there is no sound on output (either) and mic doesn't catch the signal.With MS Windows 8.1 it works good. Therefore I suppose problem not in hardwear, most likely in drivers.Does anybody have the same problem?

Hi Andrew,
The latest drivers release on 4 Nov, 2014 can be found here.
Please download/install it and let me know if you still have the same problem.
Cheers,
Colin-CL

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

HT204291 i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video j

i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video just music. I want to mirror it on my apple tv. Will you please help me?

That's why, you will need to upgrade to 10.8

My remote Control doesn't work with my new imac

I have a brand new iMac 27" with mountain lion, and Doesn't work with my aluminium remote control, I already follow the steps on Help, but there's no IR option on the advanced button of security and privacy. Of course I already check with my iphone dock and the batteries are OK, So I think it's a bug from the OS.
Any thougths?

Thanks mende1.
Apple that, *****!!

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion

Similar Messages

Maybe you are looking for