My 2nd gen Ipod isn't being recognized by my Mac. What can I do?

My Mac doesn't recognize my 2nd gen I pod nano.  How do I fix it?

Hello there, klr81.
The following Knowledge Base Article provides some great steps for the issue you're describing:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • 2nd Gen Ipod Shuffle is not recognized by Power Mac G4 Mirror Door

    When I first bought my Shuffle and connected it to my G4 it worked flawless, i put my music on the shuffle and charged it . About 3 weeks later i went to put some new music on it and i plugged it into the dock (iTunes usually comes up automaticly and it shows that my shuffle is connected to the computer), this time it didnt open iTunes and the ipod icon didnt show up on the desktop, i tried taking it off the dock and unplugging it from the computer then plugging it back in and it still wasnt getting recognized. My ipod still plays music fine but when i connect it to my G4 it just blinks amber once and then thats it, nothing happens. Anyone else have similar problem? I cant figure it out.
    Power Mac G4 Mirror Door   Mac OS X (10.3.9)   Power Mac G4 dual 1 GHz prossesors,1.5 GB of RAM, and 200 GB HD

    When I first bought my Shuffle and connected it to my
    G4 it worked flawless, i put my music on the shuffle
    and charged it . About 3 weeks later i went to put
    some new music on it and i plugged it into the dock
    (iTunes usually comes up automaticly and it shows
    that my shuffle is connected to the computer), this
    time it didnt open iTunes and the ipod icon didnt
    show up on the desktop, i tried taking it off the
    dock and unplugging it from the computer then
    plugging it back in and it still wasnt getting
    recognized. My ipod still plays music fine but when i
    connect it to my G4 it just blinks amber once and
    then thats it, nothing happens. Anyone else have
    similar problem? I cant figure it out.
    Is the Shuffle dock connected to one of the REAR USB ports? What does Apple System Profiler say about the USB tree? Does it show the Shuffle?

  • 2nd Gen iPod shuffle is not recognized by iTunes or computer

    I read the other posts about people's 2nd Gen Ipod shuffles not being rcognized by iTunes or their computer, but none of them seemed to fit.
    I have had my iPod shuffle for less than a week. Last time I had my iPod connected to iTunes in the "Settings" section I clicked "Do not automatically open iTunes and synch with iPod" or something along those lines. I assumed this meant iTunes wouldn't always open when I plugged it in to charge it.
    However, now when I plug it into my computer, iTunes does not recognize it and I get a message from my computer that there is a "USB Device Not Recognized" and the error message reads: "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." It shows up as an "Unrecognized Device". I have tried plugging it into a different USB port, and I have also downloaded the "Ipod Reset Utility" to try to reset it to it's factory settings, in case that would allow it to synch up with iTunes again. This does not work. Does anyone know why this is happening, or how I can get iTunes to recognize my iPod again? Thank you!

    Brand new ipod shuffle (2nd gen). When I plug it into the USB port, a "Disk Insertion" prompt warning appears with the message "The disk you inserted was not readable by this computer." The two options in the prompt window are 'Eject' or 'Ignore.'
    Having read other message boards, I decided to plug it into a PC computer and re-formatted it with FAT 32 filing system, but the exact same thing still happens. My MacBook give me the same message when I plug the shuffle to the computer. iTunes does not recognize it that anything is plugged in either.
    Any suggestions?

  • My 2nd generation ipod is not being recognized by laptop or ipod player and night before , it was

    my 2nd generation ipod is not being recognized by my laptop or ipod player and the night before it was

    I have followed all the 5-R's, resetting, retry,restarting, reinstall itunes, restore.  I realize this is an older ipod nano, but it works great but just not communicating with my laptop or ipod player.

  • HT1353 2nd gen iPod isn't recognized by iTunes nor Windows - What to do?

    I have an iPod A 1019 (2nd gen?). When I connect it to the firewire connector on my PC, the unit screen shows a checkmark and "OK to disconnect." I tried to reset with Menu + Select (=nothing happened) but Menu + Play works. Still, PC + iTunes won't recognize iPod. Help? I suspect that the software on the iPod itself is too old but since the device cannot be discovered, I can't update it. I tried iPod transfer software, but nothing recognizes my oldie. Sigh.

    Hi, Griff W.!
    Thanks for taking the time to offer me the troubleshooting steps. I tried them all, but unfortunately to no avail. I can listen to the iPod, but once I connect it to my PC with the firewire cable, it still isn't recognized in iTunes or in Windows. I checked the Universal Serial Bus controllers. The iPod is nowhere to be seen. I checked the version of the software on the iPod and it's 1.5. Maybe that's the problem: the software is too old?
    BTW, the firewire cable is charging the iPod.
    Maybe if I could find someone with an old PC that has a firewire port?  But even if I were to make the iPod visible, would I be able to copy the songs onto my new iPod? From what I've been reading probably not. It's really exasperating. They music is legit, copied from my CDs or purchased.
    I am looking at my new superslim iPod Touch 5th generation and right next to it the clickwheel iPod 2nd generation that's more than a cigarette pack sized. Progress. I guess.
    Thanks for helping out. If you have any more ideas, please let me know.
    Best regards,
    D.

  • My iPod isn't being recognized by the computer.

    I've had my classic since this past christmas (it's the new 120g), and last week, everything got wiped off of my iPod. I'm not sure what happened exactly. I restored it on my computer, and re-synced it. Ever since then, my iPod has been showing the big red X at least once a day. Sometimes I can restart it a couple of times, and it will be fine. Today it happened, and no matter how many times I reset it, it still shows the X. I have it plugged into my computer, but the computer doesn't recognize it. It doesn't show up on My Computer or iTunes or anything. I have no idea how to restore it or what do now. I've tried using the "contact the experts" thing online, but when I plug in the serial number for a classic (8M8398FV2C5), it tells me that the number is invalid. That's the number on the back of my iPod and when I plug that number in the search bar, it comes up with a classic.
    Please help me, my iPod is my baby.

    Did you try everything here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Next try another computer.

  • My ipod isn't being recognized by itunes

    My ipod just randomly stopped connecting to itunes. I've tried restoring and restarting it, my itunes is up to date, and there are no problems with me cord. What should I do now?

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • My ipod isn't being recognized in itunes and not in my computer

    when i plug my 2nd generation ipod up it won't go to itunes and it wont even register in the computer. But when i plug up the 30 gig ipod it goes directly to itunes and it shows up in the address bar. I ran the diagnostic and it showed that the 2nd generation was the secondary and not the primary ipod on the computer. I wonder if that has anything to do with that at all? I have no idea I've been checking for months i need some help.

    "I ran the diagnostic and it showed that the 2nd generation was the secondary and not the primary ipod on the computer."
    What diagnostics?
    If you are connecting both iPods at the same time this will cause problems. Disconnect the 30GB while syncing the Nano.

  • My iPod isn't being recognized on itunes or my computer

    I just got the ipod touch and I wanted to sync my itunes music to my ipod but itunes can't recognize my ipod. I ran a diagnostics check also but it still wasn't found. I checked to see if my computer could recognize my ipod also but it still wasn't found. I don't know how to fix this problem, can someone please help?

    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Make sure you have iTunes 10.7 or later on the computer.

  • Ipod isn't being recognized by my computer

    My ipod has the icon that shows that it needs to be connected to itunes to be synchronized but once i connect it to the computer it won't recognize it. One of the reasons im thinking is because, i connected it to a new computer not the one i had originaly downloaded too. If this is the cause what can i do to install it to my new computer? All my USB ports are correct (I connected it to each one) and the wire is fine but i dont understand why it won't recognize it.
    Pleas respond ASAP
    Thank you
    Andy61

    Welcome to the discussions,
    try the basic troubleshooting mentioned in this article: http://support.apple.com/kb/TS1538

  • I have ipod nano gen 7, can't get it to sync on my computer,message keep coming up ipod isn't being recognized. what can i do to fix the problem, all my itunes are updated.

    my ipod nano gen 7, will not sync any music from my computer, all itunes are updated.the message is itunes is saying, that a a ipod has been detected,
    but it will not show up on my itunes so i can put music on this new ipod. what could i do to fix this error. i uninstall itunes, and still the same.could you help out.
    thank you
    robertleearmy

    Hello robertleearmy,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Best of luck,
    Mario

  • Ipod isn't being recognized by my pc or itunes.

    For some reason (probobly something stupid I did) my ipod is telling me to connect to itunes to restore, however when i connect my ipod to my computer itunes doesn't say it has connected and my pc says that it isn't connected in any of the usb ports. I've tried uninstalling and reinstalling itunes and resetting my ipod, but my pc/itunes says that the ipod is not connected. The ipod however says it is and still charges and comes up with a white do not disconnect screen.

    There are too many plausible suggestions, refer to this Apple Support Article on
    iPod not recognized in 'My Computer' and in iTunes for Windows
    But do the Disk Diagnostic first, as posted by tt2, it will help us in troubleshooting.
    Have a nice day!

  • My new iPod isn't being recognized by my computer

    Here's my issue: the iPod is brand spankin' new; it was a graduation gift from my uncle, and since we finally got an operating system that's compatible with the software, I installed it all in yesterday. It posed no problems, so I downloaded music onto it and let it charge until this morning. When I took it off, it gave me the 'folder with exclamation point' icon, so I went to Apple's support site and it told me to download updater 2006-06-28. I was hesitant, so I tried everything else before I finally downloaded it.
    Now, iTunes doesn't recognize it, the computer doesn't recognize it, and not even the freakin' updater recognizes it. Not to mention, of course, that all my music and settings have been completely erased from it and continue to be erased everytime I take it off in order to try something new.
    Is there anything I can possibly do?
      Windows XP  

    iOS: Device not recognized in iTunes for Windows
    You need iTunes 10.7

  • New iPod system vers. 1.2: Now my iPod isn't being recognized

    So I just bought last week's episode of 'The Office' through iTunes. Of course, in order to do so, I had to download the new iTunes 7.0.
    So when I connect my iPod and try to transfer 'The Office' to my iPod, I'm told I need to download and install the new iPod 1.2, which I do.
    Problem: when I ran the installer, I got this 'meter' in the middle of my screen, which said 'Updating iPod.' It ran for 3 minutes...5 minutes...10 minutes. I let it run for like 20 minutes, and it never went away. So I had to close iTunes by using my Windows Task Manager.
    Now, when I hook up my iPod, iTunes opens, but my iPOd is nowhere to be found in my menu on the left-hand side.
    Any suggestions/ideas?

    i had problems like that, the hardest part is getting your computer to recognize the ipod again. if you can get it to recognize it as a hard drive though use windows to do a quick format to erase it. after that just plug it in and start over. then you can reinstall whatever software version you want. *when trying to get the computer to recognize it as a hard drive have itunes closed

  • My ipod isn't being recognized by my computer or itunes no matter what i do

    I have tried my ipod on two different computer , install the new software and everything i could possibly do but it does have the folder with the icon but other then that it is frozen.

    Got the same problem... ipod mini not recognised by the pc and the icon folder is displayed. Refused to reset or restore either from the pc via itunes or directly from the menu & set buttons on the ipod.
    any luck in resolving it?

Maybe you are looking for

  • To show all employees in Napesco Staff Ledger

    hi when the report Napesco staff ledger olap report is run in erp simultaneously Napesco Staff Ledger Details Report(exec file name is 'NPSTALEDDTLS') is also run Both are PL/SQL Stored Procedures when i checked the pl/sql stored procedure i found th

  • Unable to process your request when clicking next page button in web app

    Hi, 1) I'm using CR for VS v13 (13.0.2000.0) 2) .Net 2.0 in IIS6 compiled with TFSBuild on TFS2008 3) Issue ocurs when deployed on QA server 4) Database is SQL server 2005 5) Ado.Net passing data definition thru an xsd with a multiple tables dataset

  • Vendor Master post code control in drop down option.

    Hi, I want to control In Vendor master drop down option, post code should not display in drop down for particular account group. How I can control in drop down option. Please help me. Br, Hanuman.

  • BAPI's in FICO module

    Hi,    How can i see all the available BAPI's in FICO module.          Thnaks,          Ram.

  • Softwareupdate hangs and consumes 90%+ of cpu

    I have an acquaintance who will occasionally run softwareupdate from a script, with various parms. The parm used doesn't make a difference. It will hang and consume upwards of 90%+ of his cpu. He does have a proxy setup. We added "apple.com" to the b