My 2nd Gen iPod touch would not finish backing up to update to 4.2 firmware. So I tried to restore it, and it failed to restore. It shows the "Connect to iTunes" logo and iTunes will not recognize it. How can I get iTunes to recognize it?

Please help.

Think I got it figured out... I missed the whole "sync apps" when my iPod was connected to my computer (in iTunes)

Similar Messages

  • 2nd gen iPod touch only displays start-up apple icon, and is not recognized by iTunes - what to do?

    2nd gen iPod touch only displays start-up apple icon, and is not recognized by iTunes - what to do?

    Thanks, but I've checked those articles out already. I drained the battery and finally got the needs charge (battery w/red line + arrow pointing to a charging bolt), I plugged the USB into the laptop and held down the start key +home key until I saw the apple logo. However, it still was not recognized by itunes. It's been plugged in for over an hour now and the screen is cycling apple logo/low battery (battery w/red line)/and black screen.

  • 2nd gen ipod touch sleep/wake button will not work

    Like the title says, the sleep/wake button (top button) doesn't work on my 2nd gen ipod touch. In short, I can't put it into sleep mode (I have to wait the one minute), turn it off to save the battery, take screenshots, or even reset it (without iTunes, anyways).
    I don't have any guesses on why it's not working. It just stopped working one day. I don't see water damage (via the water damage detector in the earbud jack), and I don't think I dropped it in a way that would harm it (unless dropping it on carpet counts).
    I should also mention that randomly, one day after school, I was messing with it, and the button worked. I think the battery had died, and I managed to turn it on then. It worked for a few hours (I charged the battery), and then it went back to not working.
    The warranty's up (and I'm broke), so I can't repair it. I also want to point out that the problem started not long after the warranty expired. What, at this point, is my best option? Should I just save up for the newest model? Or would it be cheaper and more efficient to save up just enough for a repair? Any other options I should consider?
    Thanks in advance.

    As I said, you can move on to Restore. Backup everything then Restore as New. Restoring from backup would just copy whatever software issue you may have. But it sure looks more and more like a hardware problem. Take a close look at the button to see if perhaps some dirt particles are stuck there.
    You can also make an appointment with a Gnius at the nearest Apple store to have it diagnosed. Apple does not fix iPods, they just replace them with refurbished units, so it won't be cheap. Prices are here: http://www.apple.com/support/ipod/service/prices/
    You can Google for third part repair hops or do-it-yoursel kits.
    Good luck.

  • 2nd gen iPod touch - Factory restore not working

    I'm trying to factory restore my 2nd gen ipod touch.  I figured I could simply choose the factory reset in the setting and it would do it's thing.  Now it says it needs to connect to iTunes in order to complete the process.  However, when I plug my phone into my (windows) PC, iTunes doesn't recognize it.  It makes the normal sounds and starts charging, so I know the PC recognizes that it's connected, but iTunes will not.  now, I can't do anything on the ipod - it just sits there like a brick,   help!

    Tap Settings > WiFi > your network name (or at least the one with the check mark). Tap the little blue > next to the name. Look at Device IP - if it starts with 169.x then your router has not issued you an IP address
    You also should have "Renew Lease" and "Forget this Network" buttons. Try pressing Renew Lease to see if you then get a valid response from your router.
    If this doesn't work you can try these things:
    1. Reboot your router (just unplug the power cord for a minute, then plug back in). If this doesn't fix it, try disabling security to rule that out.
    2. Reset the touch network settings - tap Settings > General > Reset > Reset Network Settings
    3. When the touch restarts, tap Settings > WiFi > other and re-enter your network name, security, and network password.
    There is more troubleshooting info [in this support article|http://support.apple.com/kb/TS1398].
    Hope this helps.

  • 2nd Gen iPod touch 16GB  iTunes ??

    ?? When my 2nd Gen iPod touch 16GB is in the iTunes store, it no longer allows me the option to purchase an entire album (only single songs) nor am I able to tap on the review. Any info or suggs would be greatly appretiated.

    Other users have posted the same issue.  I have not yet seen a solution.

  • OS 10.3.9 / iTunes 7/ 2nd gen iPod touch - help!

    Hi,
    I've just ordered 2nd gen ipod touch, not arrived yet, but i read online that it must run on itunes 8. I've just tried to urgrade my itunes 7 to 8 but got message saying that OS 10.3.9 does't support version 8? Help! Does this mean I need to buy OS 10.4 or 10.5?
    Thanks
    Clare

    Thanks but not what i wanted to hear! ;-(
    Thinking might try running it off my Win XP laptop for a bit to start with. Now I think about it
    had same problem when I tried to install my sisters iphone on my PB few months ago but it worked on my Win XP with whatever itunes version it is I cant remember - hopefully it will work ipod touch
    too!
    Thanks
    Clare

  • How can I get Itunes 7 to burn to my external La Cie burner, and not my internal Pioneer burner, which is behaving unreliably?

    Is there a way to reset the default CD burner? I have an internal pioneer burner the DVR105, and an external firewire La Cie burner. The La Cie burner is much newer  and will burn properly. However, itunes 7 is trying to burn to the internal DVR105 only, and it keeps giving me errors.
    How can I get Itunes to burn to the healthy la Cie? I know my Toast software recognizes it...I have burned DVDs to the La Cie many times before  in Toast. Itunes offers me no option to select which burner to use, unlike Toast. My OS is Panther.
    thx
    c-post

    Sorry, Itunes is not giving me that dialog. Lemme tell you, it did give me a related dialog earlier today when my La Cie was not connected. Apparently it defaulted back to the Pioneer at that time. I have since reconnected the La Cie, and the system is seeing it, however Itunes won't offer me the option to burn to the La Cie. It just burns to the Pioneer, then gives me an error saying it can't burn the CD.
    c-post

  • I am upgrading from a 2nd gen ipod touch to a 4th gen ipod touch. Will I have problems syncing my new ipod to my existing itunes library/account?

    I am upgrading from a 2nd gen ipod touch to a 4th gen ipod touch. Will I have problems syncing my new ipod to my existing itunes library/account?

    Don't know why you would.
    You can sync as many ipods/iphones/ipads as you like.

  • My 2nd gen IPOD touch will no longer sync with itunes.

    My 2nd gen IPOD touch will no longer sync with itunes.  it tells me it cannot read the contents of the ipod then it says the ipod software server cannot be contacted.  Any suggestions?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem
    Then try restoring again.

  • My ipod reset itself it would not let me log into my old itunes account so  I made a new one how can I get to all my music and stuff.

    My ipod reset itself it would not let me log into my old itunes account so  I made a new one how can I get to all my music and stuff.

    To recovery yoyr existing account:
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
    If necessary:
    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions

  • How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.

    How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.

    Make an appointment at the genius bar.
    If you went without an appointment, then it would make sense that you could be turned away.

  • I currently have an iPhone 4s, ipad2 and 2nd gen iPod touch connected to a dock. Can I control the iPod using my phone or iPad if I have iTunes open on laptop?

    I currently have an iPhone 4s, ipad2 and 2nd gen iPod touch connected to a dock. Can I control the iPod using my phone or iPad if I have iTunes open on laptop?

    The Tango app might be of some help with that:
    http://www.tuaw.com/2010/11/08/tango-links-your-ios-devices-for-remote-music-con trol/

  • Movies converted for AppleTV won't sync to 2nd gen iPod touch with iTunes 8

    I have about 40 movies that I converted to "Apple TV" format with Quicktime Pro. They all play fine on my Apple TV. But only one of them will sync with my new 2nd gen iPod touch... and that one was converted by someone else for me to Apple TV with iSquint!
    iTunes tells me the remaining videos cannot be played on this iPod. ***? They play in iTunes, they play on the Apple TV... what's the difference with the iPod?
    So now I'm having to completely reconvert all my movies to iPod format with the function in iTunes 8 "Create iPod or iPhone version" but this is PAINFULLY SLOW!!! One video on my brand new 3.06Ghz iMac Intel Core 2 Duo took FOUR HOURS
    Anyone else having this problem? Anyone else find a faster way to fix it???
    HELP!!

    It just does.
    You can do it quicker using other tools.
    For instance I have a hardware device called Turbo.264 which shifts the conversion off the computer and is much quicker.
    You can read all about it here :-
    http://www.elgato.com/elgato/int/mainmenu/products/Accessories/Turbo264/product1 .en.html
    Ian

  • 2nd Gen iPod Touch Doesn't Charge at all

    2nd Gen iPod Touch Doesn't Charge at all, not on pc or mac or wall or anywhere. I need the information on it, last time it was backed up was 2 years ago,cracked glass and bad headphone jack. can Apple help me get my info out of it? it is out of warranty, can i pay to have it fully recovered as if it never died?

    Try connecting it for a charging source for 24 hours.
    Then try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then see if iTunes can see the iPod so you can get info from it
    - Inspect the dock connector for bend or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genus Bar of an Apple store. They may or may not be able to get info from the iPod. It depends upon what is wrong
    Apple Retail Store - Genius Bar

  • I just got a 2nd gen Ipod touch with iSO3.3.1 I want to update it to iOS 4.0 how do I do this?

    just got a 2nd gen Ipod touch with iSO3.3.1 I want to update it to iOS 4.0 how do i do this?

    Open itunes,   plug in ipod.  it sbhould tell you there is an update.
    If not then click check for updates.
    iPod touch User Guide (For iOS 4.3 Software)

Maybe you are looking for

  • Issue with MB51 - Value in Amount in LC column- Reg

    Dear ALL, I have an issue from Materia Ledger  - while executing the report MB51  to view the material document with relevant to MIGO process (GRN with movement type 101), it has been noticed  that  some items it is picking up the value in amount in

  • 24" iMac screen issue

    Hi all, just returned my new 24" iMac after a problem with the speaker and I have a nice fresh one. The problem now is when playing a DVD through either Front Row or DVD Player there appears to be a light at the bottom of the screen creeping onto the

  • Create a dll for windows with gcc

    hello! I have made a program in 'C' under linux and i want to make it into a dll with gcc to use it in labview under windows. Has anyone already done a such thing? so what is the magic option to pass to gcc to make it properly? Thank you.

  • Multiple clients on one instance of SAP SolMan

    Hello, I have doubt about the conductibility of SAP Solution Manager to support more than one client, as an example, ones for Development and the other for production. I think that the limitation is due to the Java side which does not allow to perfor

  • Have lost settings and data

    Hi, i've got a refurbished G4 running OS x.4.10 and until recently it's been working fine but i logged on the other night to find that the desktop had reverted to default settings, iphoto had started from scratch (and lost all my photos) - the same w