My 2nd generation nano will not charge and is not recognized by my computer

last week I accedentally disconected my ipod while it was syncronizing and now my computer will not recognize it and it wont charge. I have tried rebooting both my ipod and my computer I have tried other computers and nothing seems to work, does anyone have any other ideas?

Hey andyk85,
Thanks for the question. I understand you are having issues with your iPod nano, the following article provides troubleshooting steps that may help:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
If you are unable to resolve your issue, or believe it is hardware-related, see the "My issue is still not resolved. What do I do next?" section.
Thanks,
Matt M.

Similar Messages

  • Updated my Windows 8 and updated Itunes to newest versions and now my Ipod 7th Generation Nano is not recognized on my computer or Itunes anymore. I have went thru all steps instructed and offered here so what else can I do?

    Recently have updated my Windows 8 and updated Itunes to mose recent version available. My Ipod 7th Generation Nano worked, connected and synced without difficulty prior to this updating, Now when I plug into my computer it will pop up Itunes but say that this Ipod is not recognized. I have done multiple steps offered to try and nothing has worked. Any other suggestions would be helpful. I just got this Ipod for Christmas and now can't even use it to sync content anymore.

    Try a different cable. And are you connecting directly to your computer or through a USB hub?

  • My 6th generation nano will not sync music from itunes anymore

    My 6th generation nano will not sync music from itunes anymore.

    could you give us a bit more detail on the situation, Eeve?
    is it that the songs say that they're transferring, and appear on the ipod screen in itunes, but when you unplug the ipod they aren't on there? or is something a bit different going on?
    (if you're getting an error message, let us know what it says. include error message numbers if you're getting any.)

  • My 2nd generation shuffle will not sync with itunes. Why?

    I have done everything I can think of. I have restarted my mac several times, restarted Itunes and my 2nd generation shuffle will not show up in my iTunes. I just updated my iTunes and Mac to the latest version. Any help? Why wont my itunes connect to my ipod shuffle??

    When iTunes is NOT running, does the shuffle show up on the Desktop, or appear in Disk Utility (when you run it)? Or, if you run System Profiler
    Apple Menu -> About This Mac -> More Info -> System Report (if running Lion)
    does the shuffle appear as a device under Hardware/USB?
    If it is being recognized by the Mac in some way, you may be able to get it working again, using the iPod Reset Utility
    http://support.apple.com/kb/HT1238
    This utility is for 1st and 2nd gen iPod shuffles only, as a "lower level" reset when you can't do a regular Restore in iTunes.
    If the Mac is not seeing the shuffle at all, there is probably a problem with the USB connection, probably the USB cable/dock or the connection point on the shuffle (headphone jack) becoming faulty.  To rule out the USB port in the Mac, be sure to try different ports.  If you have been using a USB hub (or the spare keyboard port), be sure to try a direct port on the Mac.  And be sure to try it with ALL other USB devices (except standard mouse and keyboard) disconnected, in case there is some USB device conflict happening.

  • Ipod Shuffle won't turn on or charge and isn't recognized by the computer

    My Ipod shuffle won't charge and isn't recognized by the computer , it turned orange than stopped and won't charge or turn on since. Does anybody has a solution please ?

    I have exactly the same problem with both my ipod shuffles. That suggests to me that it is a problem with the ipods rather than my PC or computer software. I'm surprised that no Apple tech has suggested a solution yet.

  • 2nd Generation Nano does not play all the songs with Album Art.

    Hey My 4G 2nd Gen. Ipod Nano will not play none of the songs that have Album art. It was fine for a long time but recently it just skips right over all of the songs that have a picture, and all of the songs that it skips are from the itunes store. I need help really bed, because it is bugging me. I reset it and everything, and it still will not play thoes songs. PLEASE HELP!!!!!

    See this.
    iPod does not play content purchased from the iTMS.

  • HT4623 my 2nd. generation ipod will not update the software from 2.2 to 4

    my 2nd. geration ipod will not update the software from 2.2 to 4 or 6.

    Are you sure you have a 2G? A 1G can only go to 2.1 via iTunes but a 1G can go as high as 3.1.3 that you get here:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    Identifying iPod models
    To If you do have a 2G that can go to 4.2.1 by:
    iTunes: Backing up, updating, and restoring iOS software
    For 4.2.1 you need iTunes version 10.X and that requires OSX 105.8 or later.
    If you have 10.4.11 you can only go to iOS 4.1 since that OSX can on go to iTunes 9.X

  • My 2nd generation ipod will not stay on an app

    my 2 nd generation ipod will not stay on an app for instance ghost radar classic stays on for a minute then goes to app store

    Believe it or not the iPod can go for months on end without ever completely powering down. Sometimes it helps to simply reboot it like any computer.
    The following article explains how to do that, and more:
    http://support.apple.com/kb/TS3281

  • 3rd Generation Nano:  iTunes not recognizing iPod

    I've already syncd music to ipod several times, now iTunes is telling me to "restore" only option that is available. iPod will not restore, I kept getting error message 1418 (?) before this iPod was being charged on another computer, after it was charged, all songs were gone? Now this...
    I've already tried all that was suggested, reseting, etc...problem though, iPod was bought as a gift in the states and we live out here in American Samoa

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Cheers,
    Patrick

  • My iPod Shuffle 4th generation 2GB is not recognized by My Computer in Windows or under Devices in iTunes.

    Everyone has the same problems. My iPod has been plugged in properly, I have followed all the support suggestions but nothing works. HELP PLEASE!

    I have downloaded that utility but can not use it, as
    when I plug the shuffle into the USB port, it is not
    recognized by either computer I am using. I can not
    reset or restore, because in order to do that the
    computer would have to know the shuffle is plugged in
    and it doesnt. I have tried this on two different
    computers and get the same result, so I dont think
    its a computer issue, its an ipod issue. I also used
    to be albe to play the shuffle on the Xbox 360 and
    now can not.
    Just as a check, did you actually follow the THESE directions...EXACTLY?
    Using iPod shuffle Reset Utility
    1. Quit all running applications on your computer.
    2. Open the iPod shuffle Reset Utility.
    3. Connect iPod shuffle to a USB port on your computer. Do not connect iPod shuffle to a USB port on your keyboard or other non-powered USB hub.
    4. Click the Restore button. If prompted, enter an Admin user name and password.
    5. The restore process will start.
    6. When it is complete, quit iPod shuffle Reset Utility and open iTunes to sync music to your iPod shuffle.

  • My 4th generation shuffle is not recognized by 'my computer' or by Itunes', what now?

    This is the second IPod shuffle I've been through with the same issue.  It's not recognized on neither Itunes or 'my computer', therefore, Im unable to load anything onto the the shuffle.  The last time this happened, those were the symptoms I experienced before the entire unit went dead.  Any idea what I'm to do next?  I couldn't possibly get 2 x defective units. Anyone?

    Hi jasthom,
    If you are having issues with your iPod nano not being recognized by iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Regards,
    - Brenden

  • My ipod 3rd generation nano will not power up and itunes does not recognize it, what can I do?

    My 3rd generation will not power up. I've tried to reset it by holding the menu and select buttons at the same time but nothing happens. My itunes will not recognize it either when i connect it to the usb port. Does anyone have any suggestions? Thanks.

    See:
    iOS: Device not recognized in iTunes for Windows

  • IPOD Touch 2nd Generation A1288 will not Restore/Reset

    I have an iPOD Touch 2nd Generation A1288 that has gone into disabled mode. The Apple instructions for putting my device into recovery mode are not working and I have a new computer that has never connected/synced with this iPOD before :-( . iTunes just keeps telling me it can't connect to the ipod because I need to type my password into my ipod. IPOD screen still just says disabled. I have tried to get it into restore mode so many times that the "power off slider" won't appear on screen anymore when I hold down the sleep/wake button. The screen just goes black. When I press the home button the disabled screen pops up again.  Do I need to take my iPOD to an apple store? The iPOD is named with my name and I have my ID to show the iPOD is mine so will they help me at the store? I have been researching for hours it seems and I just can't find further help on restoration/reset. Side note: was my daughters old iPOD and she does not remember what the password is. Ugh... teenagers! thanks ahead of time.

    No reason for an Apple store visit. It not an ID problem at all
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • My 2nd generation ipod will not show on itunes when connected

    my 2 nd generation ipod does not show on itunes when connected

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • 2nd generation ipod shuffle not recognized by usb 3.0 port, 2nd generation ipod shuffle not recognized by usb 3.0 port

    Hi,
    My 2nd generation ipod shuffle will not connect to any usb 3.0 port.  I've tried on to computers -- one Windows XP and the other Windows 7.  Any ideas?

    Hi
    I had the same issue with my Late 2009 Mac mini running Mavericks and iTunes 12. When I connected my 2nd generation iPod shuffle it would blink amber once then do nothing. This seems to be a common problem with the iPod shuffle and newer versions of Mac OS X (10.6 and up) and iTunes albeit with somewhat varying symptoms but the same overall problem syncing the iPod with iTunes.
    The predominant go-to solution is to give the iPod more power by either connecting the iPod directly to a USB port on the Mac or by disconnecting all other USB devices. On paper this makes sense.
    What worked for me, however, was the opposite. After trying to solve this problem for hours (weeks, months), I had success ONLY after adding a low-powered 4-port USB hub to the chain between the iPod and the Mac. I suspect this had the effect of throttling the power supplied to the iPod from the Mac. I was able to perform a restore on the iPod then sync my music over.
    I can't tell you much about the USB hub except that it is running at USB 1.1 speeds (12 Mb/sec). In theory a USB 1.1 extension cable should also do the trick. You might even be able to use the USB hub in old wired Apple USB keyboard. I will attach a photo of the hub I used to this post for greater clarity.
    I really hope this helps.

Maybe you are looking for

  • AUC Down Payment issue

    Dear Experts, Recently we have activated the down payment process in our system for normal purchase orders without configuring for AUC. In the month end we settle the internal orders to AUC (KO88), while doing this process, I got the error You cannot

  • Restrict PO creation with a third Party vendor

    Hi, I would like restrict a user for PO (ME21n) creation if the vendor belongs to the third party vendor account group? Regards Sreeni Edited by: sadasiva srinivasa rao on Oct 12, 2010 5:27 PM

  • Types of cluster in ms sql server 2012

    Hi, I am not good in sql server, i got one requirement to migrate standalone ms sql server(which contains replications also) to cluster env, so i have few things to know 1) what are the types of cluster available in ms sql server 2012 2) any steps wo

  • DW CS4 Ignoring Check In/Out on 1 Site Suddenly

    We're using Dreamweaver's Check in/out functionality in my office and have been for about a month now. No problems. Suddenly this morning, my coworker's DW is not checking out the files when she opens them. It sometimes throws a prompt that the file

  • Error ORA-13285

    Any suggestions on what could be going wrong here? SQL> Select t1.* from t1, t2 2 where (sdo_relate(t1.geoloc, t2.geoloc, 'mask=ANYINTERACT querytype=JOIN') = 'TRUE'); where (sdo_relate(t1.geoloc, t2.geoloc, 'mask=ANYINTERACT querytype=JOIN') = 'TRUE