My 3.6.8 Mozilla is not recognised by Mozilla webside when I want to install a plugin, it wants me to update first.

I was trying to install "Better Privacy" plugin but the Mozilla webside show a sign saying the plugin is not avoilable for Firefox 2.0.0.14. And that I should update my browser. I did. It didn't work, the sign didn't disappear. Before updating I had Firefox 3.6 already installed.

Your user agent string, which identifies your version of Firefox has been changed by the megaupload toolbar, it incorrectly makes it appear that you have Firefox 2.0.0.14 instead of 3.6.8
If you reset it, you should then be able to install the add-on. For details see [[Web sites or add-ons incorrectly report incompatible browser]]

Similar Messages

  • Mac does not recognise my admin password when I try to install updates

    I have followed the forget password instructions by installing the Mac OS X install disc and restarting and holding down c key etc and when I put my password in it is still not recognised

    Check the Accounts preference pane to make sure you are still listed as Admin. Check this out:
    http://support.apple.com/kb/TS1278

  • HT1567 Itunes 10.6.1.7 is not recognising an Audio CD when inserted in the drive. This means I connot import any CD's. What could be wrong?

    iTunes 10.6.1.7 is not recognising an audio CD when inserted in the drive. This means that I cannot import CD's. It used to work but since installing other software iTunes does not see the audio CD and will not open the drive when "eject disc" is selected from the controls menu.

    Check the drive letter of your CD drive.  iTunes doesn't seem to work properly with CD drives if they are mapped to the letters A or B.  Use Disk Management tool in windows to change to a different letter and this will fix it (if this is the cause!).

  • My iPhone 4S is not recognised by my computer when I try to sync. I am looking to upgrade, is it just easier to purchase a new one, then manually transfer data and information?

    My iPhone 4S is not recognised by my computer when I try to sync. I am looking to upgrade, is it just easier to purchase a new one, then manually transfer data and information? I don't want to try syncing and backing up data to just lose it all. As the new one I plan to get is a newer model, I'm thinking it is just better to do it manually, but then I have the issue of syncing the new one to start.

    Hello Smeebo,
    Thank you for asking your question! It sounds like your iPhone is not recognzied in iTunes when you connect it to back it up, or update the device. I would try the troubleshooting in either of these 2 articles depending on what operating system you have:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    or:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
    iPad: Unable to update or restore

  • My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    Hey there mbarikiwa,
    If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
    OS X Yosemite: If a USB device isn’t working
    If the device is connected to a USB hub: 
    Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on. 
    If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord: 
    Try plugging the device directly into your computer’s USB port  or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding. 
    If you have many devices connected to your Mac: 
    Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps. 
    Verify that the device appears in System Information: 
    Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information. 
    In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps. 
    Restart apps: 
    Quit and restart any apps that use the device. 
    Restart your Mac: 
    Choose Apple menu > Restart.
    Check your device’s USB connection
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • HT4796 I am getting the message "WindowsMigrationAssistantSetup.exe is not a valid Win32 application" when I try to install Migration Assistant on my PC running XP SP3

    I am getting the message "WindowsMigrationAssistantSetup.exe is not a valid Win32 application" when I try to install Migration Assistant on my PC running XP SP3

    That's a Windows PC issue. What is the Mac OS X Lion issue? In other words what are you posting in the Lion forums about?

  • Iphoto 11 compatability with gmail. Server not recognising user or password when I attempt to share photo,s

    When attempting to  email photo,s  using iphoto this message appears; server not recognising user or password. i have checked preferences and may gmail a/c is listed as default sender. Any help out there for me? PS It was fully functional before I installed Home and office for mac.

    Upgrade to v9.4.1 or
    Trash the HP Plug in from /Library/Application Support/iPhoto
    There are two libraries where this plugin might be
    HD/ Library
    and
    HD/Users/Your Name / Library
    (On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)

  • Hand Held application not recognising a database instance when running in cradled mode through Windows Mobile Device Centre.

    How do I get a Hand Held application to recognise a database instance when running cradled through Mobile Device Centre?
    I have a database instance on a networked machine as NZTESTSERVER2\NZ2008.
    If I run the Hand Held application in WI-Fi connected mode it resolved this database connection name without any problems.
    This database connection name also works from a Desktop application running on the PC that I have cradled the Hand Held to.
    But the instance isn’t being resolved when I run the Hand Held application in cradled mode, without a Wi-Fi connection. In this case it still recognises the server address part ‘NZTESTSERVER2’ but it doesn’t recognise this with the database instance included
    (\NZ2008).
    I even tried using it with the servers IP and the instance (192.168.0.14\NZ2008), but again it recognises the server IP address (192.168.0.14), but not with the instance (\NZ2008).
    So why does the app run in WI-Fi but not cradled mode?

    It would better to understand your problem if you can share some code here,

  • Does not show my hard drive when i try to install Tiger...

    I have a Powerbook G4 that has no operating system installed yet, so when i try to install Tiger, i have to put the DVD in while booting up. I went to the installing screen, and i agreed to everything and all, but when i got to the part where it asks where to install, my hard drive does not show up. I went to DISK UTILITY and chose to erase the entire hard drive (I dont have anything on it yet) and I also chose to repair it. It didnt have any needed repairs, so I went back to the install screen, and it still didnt show the hard drive as an option. It is a 55.9 GB hard drive, and when i erase it, the size does not change, so I know there is nothing on it yet. In Disk Utility, the details for the Hard drive says it is named CSD CAT060L, it is a Disk, the media type is Generic, and it is Internal. I have tried this many times, but the exact same thing happens. My DVD for Tiger was unopened, and new out of the box. If you need any information about what happens or anything, just ask.
    Thanks a bunch, Eshan.

    Try this:
    1. Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

  • I want to install PSE 13, but want to uninstall PSE 12 first. It is not listed in the control panel. I have windows 7. How do I uninstall it?

    How do I uninstall PSE 12? It is not listed in the control panel. I have windows 7. I want to install PSE 13.

    Does the iPod show in My Computer? If so then go to My Computer>iPod>DCMI Folder and copy them from there to where you want them

  • Hard drive not recognised. Haven't backed up my work recently. Don't want to lose everything

    I'm having a bit of disaster. I finished university for the term today, and typically my laptop decided immediately after my last class to die.
    When I turn it on I get a picture of a flashing folder with a question mark.
    I put it into recovery mode, intending to try and repair the disk. But it says the only disk in Disk Utilities is the Mac OS X base disk, or something like that. I DO have a time machine backup that I'm pretty sure I ran since installing Mountain Lion. Unfortunately I don't think I've backed up using Time Machine in the last 8 weeks, so it won't have any of my work from this term of university. Obviously losing this work would be a bit disastrous for my life and sanity.
    Does anyone have any advice as to what to do? I have a genius bar appointment booked bu not until Thursday and if it's something I could fix myself I'd be keen to do that (although obviously I'm not keen for taking apart my laptop for fear of destroying it even further, and also because I think my laptop is still under warranty. I bought it 13 months ago in the education store, and I thought I read somewhere that it came with a 3 year hardware warranty - can anyone confirm this?)
    Any advice would be most gratefully received!

    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Aperture does not recognise my .mcac membership when exporting to .mac

    I have been trying to update a web gallery and have had problems with images being extended or squashed when they are displayed on the web. After trying several times to export and get the site to exhibit properly I now get a prompt when a click on "publish to .mac" Saying that I don't have a" .mac account configured on this computer". Oddly enough I have the idisk synced on the desktop and am logged into my .mac account.
    Has anybody seen this before and what can I do to fix it?
    thanks
    leadparrot

    What happens if you log into the .Mac web site? Do you access it OK?
    If so, check your Keychain for a corrupt/old password or userid.
    If you're using .Mac backup, or .Sync, then keychain should be OK.
    In this case, quit Aperture and then trash your ~/Library/Preferences/com.apple.Aperture.plist
    Restart Aperture and try again. (Note: you'll have to change your Aperture/Preferences back to your needs.)
    Hope this helps.

  • Aperture does not recognise my .mac account when exporting to .mac, help!

    When trying to update my web gallery, I am getting a message stating "no .mac accoount registered on the computer." Can anyone help with this? I have the Idisk synced on the desktop and am logged into my .mac accoount.
    Any help is appreciated
    Jeff
    macbook pro   Mac OS X (10.4.7)  

    What happens if you log into the .Mac web site? Do you access it OK?
    If so, check your Keychain for a corrupt/old password or userid.
    If you're using .Mac backup, or .Sync, then keychain should be OK.
    In this case, quit Aperture and then trash your ~/Library/Preferences/com.apple.Aperture.plist
    Restart Aperture and try again. (Note: you'll have to change your Aperture/Preferences back to your needs.)
    Hope this helps.

  • DSR11 Not Recognised.   FCP Crashes When Log & Capture Selected.

    I've recently had a quite traumatic period installing QT7 Pro to work with iDVD disk burning. During that period, FCP3 worked faultlessly. Succeeded at last with disk burning then shut down for the night. Next day went into FCP and found that my DSR11 was not being seen by it. Chose 'Continue' and tried to set things up through 'Easy Setup' in the usual way. Couldn't be done. Selected Log and Capture as a 'try' and FCP crashed, leaving me with the Desktop screen. Despite numerous attempts to create a connection with the DSR11, I always am getting the box telling me it cannot be found and giving the choice to try again or select 'Continue.'
    I'm wondering if the QT settings were in some way corrupted as I shut down the computer.... I'd like some help in getting back the settings.
    I downloaded the QT7 upgrade which afforded the correct running of FCP and iDVD disk burning but now I can't find any record of the prog and its key in order to re-install it. I looked in HD/Library/Receipts and could only find references to Flip4Mac and QT Packages - no QT references with numbers following. Since inplutting this post I've found that the last mentioned QT package is 7.2 so I tried reinstalling it but after going through the procedure it ends with a message that there were errors in the installation and that I should try reinstalling it again.... Well, after four attempts with the same result, I'm here, and on tenterhooks!
    As an aftermention..... I also have used the DSR11 with my MacPro to successfully operate FCP in its normal way.
    Ron.
    Message was edited by: Ron

    On the Apple website it specifically states that QT7.2 with OSX.4.10 (actually any system of 10.3.9 and above) is the best way forward for the most efficient result from my computer. In view of that, I've recently used their Feedback page to pass the information to them. Yes, I know it states that one can only use it for feedback and they will not entertain other than that but we should have the abililty to put back to them the sort of quandary I'm in over their OS and allegedly compliant prog - ie QT7.2.
    I've now taken the bull by the horns, because there's no other way I'm going to get satisfaction with Apple's software which should be capable as stated, and I'm about to re-install QT7 then try once again. That's despite not finding those additional Receipt files for scrapping prior to the install.
    I'll report back the result when finished and tested. If it again fails, Apple will get an official complaint regarding their software that fails after being bought when their advertising says it improves rather than fails.
    Thanks for your inputs.
    Ron.

Maybe you are looking for

  • Error G/L Account is not defined in Chart of Account INT

    Hi, I have create a company code by doing copy of SG01 in transaction EC01. I have also create a vendor under the newly created company code. When i try to do a testing in FB60 transaction it prompt me an error : G/L Account is not defined in Chart o

  • How to keyframe from colour to black & white

    I am trying to do a video from present then moved to the past. So I am starting a clip from colour, then slowly it turns into black & white. I have 2 questions: 1) How do I keyframe the above effects ? 2) Instead of using the Sepia effect, is there o

  • Report painter formula  problem

    Hi we are getting the error when generating the report painter report that " Formula too long to be converted". does anyone has idea about this issue. Thanks

  • When building my application the system W98 crashing

    I have an application with subvi dinamically linked, My O.S. is W98 and the Labview 6.1 with the Application builder 6.1.The latest version of MAX(3).The target is P3 666Mhz 32MB ram. When i compile the application in this target machine i have a cra

  • Export playlist from iPhone?

    Does anyone know if it is possible to export a playlist off the iPhone? I know this works with iTunes, but does it somehow work with the iPhone/iPod? I don't want to copy the music off the phone, but just the list as an xml file.