My 30 second clip stops playing with 9 frames left. Audio and video are to 30 second mark.

My video stops just before the end without any reason. Seems to be related to audio track but I have replaced the audio and it still happens. If I extend the audion beyond 30 seconds the video plays clean through. How can I adjust for 30 second commercial?

What version FCPX?
Is the audio MP3? If so, covert to AIFF.
What you're experiencing is abnormal; you shouldn't have to devise a workaround if the media is OK.
Russ

Similar Messages

When streaming Vid with flash player, audio and video are not in sync

With Flash 11.6, audio and video are not in sync. Video is slower. Using Firefox 20.0.1

Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
[[Flash Plugin - Keep it up to date and troubleshoot problems]]
[[Flash 11.3 crashes]]
[[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
http://forums.adobe.com/thread/1018071?tstart=0
http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
Please tell us if this helped!

TS1362 All of the movies I have rented or purchased from iTunes in the last 4 months fail to play properly. The audio and video are constantly out of sync. I have followed the iTunes suggestions to correct this, however nothing has worked. (Windows 8)

I am using a Dell inspiron 14z, with Windows 8, and before that a Dell with Windows XP. This is also happening on my iPad. For the last four months, none of the movies or television shows I have rented or purchased from iTunes have played properly. The audio and video are out of sync. I have tried the troubleshooting measures iTunes suggested, however nothing seems to work. I have read on the community that this has been a problem for users in the past, and have attempted to try some of the fixes individual users have suggested also. Again, nothing seems to work. At this point I am frustrated, as we purchase or rent almost exclusively from iTunes. I would appreciate a support-staff person response. Thank you so much.

this problem has been going on for windows users for over a year now.
Apple has no solution to this problem.

HT1267 i have purchase an iphone but no audio and video are available with it .can i record video and audio by this device

i have purchase an iphone. but no audio and video are available with it .can i record video and audio by this device
<Personal Information Edited by Host>

Hello JessCastle,
Start with the article below to troubleshoot issues with the microphone on your iPhone. If none of it works then contact Apple Support to further help you out.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Take it easy,
-Norm G.

New Project will not save, re-open with accurate or matching audio and video.

I filmed footage last week. Uploaded it into Premiere Elements and edited the footage in Elements, and saved my work as a project. I opened Elements this morning, and upon opening my saved project I was prompted by the program to locate the file. When I then selected the raw footage files, it loaded the project, but with audio and video out of order, not synced, etc.
How do I save my work as a stand-alone project file with the audio and video synced as I intended, in a format that I can load, share, re-open and work on without having to re-locate the raw video?
This seems to be a basic function of Video Editing software, so I hope it is something small I can adjust and move on from. Oh Also all the files, both project (.prel) and raw footage (.mov) are saved on the desktop of the computer i am using to run Premiere Elements.

brjames1
What version of Premiere Elements are you using and on what computer operating system is it running?
After you have created a project and it has been saved, you should be expected to be able to reopen the project with the
project as before the save/close (some discussion about rendered files remaining rendered, but essentially as written).
When they do not, we can invoke the damaged project syndrome.
The following is an Adobe document on that subject.
Troubleshoot a damaged project file | Adobe Premiere Elements
If you are getting "Where is the file....?" messages when re-opening a saved closed project, typical reasons
a. you have moved, deleted, or renamed files and folders that were imported into the project after the save close...when
you import media into a project, all you get are copies of the originals in the project. But the project needs to trace back
to the originals in the hard drive location where those originals were when first imported into the project.
b. if you store your source media on an external hard drive, the external hard drive may be malfunctioning and/or the
drive letter of the external drive changing for a variety of reasons. Does any of that apply to you.
Please review and consider, and then we can decide what next.
Thanks.
ATR

Audio and video are not in sync when playing movies in iTunes

I have downloaded several movies from the iTunes store, and also ripped two digital copy discs into my iTunes library. When I try to play them, the audio is not in sync with the video. Very frustrating when you see the characters lips move, then about a second or two after, you hear what they were saying.
Any help with this would be greatly appreciated. I am running most current version of iTunes, and QuickTime.

I have looked a little bit more, and it seems as though the video is lagging behind, not the other way around. Video seems choppy, but the audio is playing perfectly. Music Videos are suffering from the same problem as well. Also, when I sync to my iPod Touch 16GB, audio & video match up perfectly.
I still have no idea how to fix this. Please help.

BB Z10 - contacts stopped syncing with Office 365 - e-mails and calendar are still syncing fine

I have had my BB Z10 for over a month and e-mails, calendar and contacts were syncing great from my Office 365 account. E-mail and calendar still sync but I have lost all connectivity to the contacts. Nothing shows up from Office 365 (my other contacts show up ok from LinkedIn etc.).
Help as this is a critical function on my phone. I can't call or e-mail anyone if I don't have their contact information.
Solved!
Go to Solution.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books (pre-BB10 devices only)
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected accounts. Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Just recently, when I put clips into iMovie, the audio and video are not in sync. How can I fix this problem?

Whenever I try to make a video on iMovie, the audio is not in sync with the video. This just happened recently. I have no clue what is causing the problem, or how to fix it. What should I do?

Hi samueldoherty,
If you are having audio issues during video playback in iTunes, you may find the following articles helpful:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden

Finder crashes with "open as" on audio and video files

My system was restored by Time Machine some time ago.
Since than my Finder crashes whenever i use the "open as" menu on movie or audio files.
I do a ctrl-click and choose "open as" nothing happens like a freeze and than the Finder crashes and starts new. Sometimes the Finder doesn't even appear again, so that i have to use the power button of my MBP to switch it off.
Other file types like jpg, pdf, ... work just fine.
I'm using a MBP, Intel Core Duo 2Ghz with 2 Gb Ram under 10.6.4.
I repaired permissions and even rebuild the launch services but it didn't help.

Hello s:
The only thing I can think of to try is to trash a preference file (com.apple.finder.plist) and restart.
If that does not help, I would reinstall OS X 10.6 (over your existing system and then run software update.
Barry

Please help with audio and video not syncing.

I'm using Encore 3, and have already authored a DVD a month ago without a glitch. The following are the same steps I used, but this time around, the video and audio in Encore are not syncing.
Here's what I've done.
1) I export my Final Cut projects to .mov using the following settings (Share > Master File).
Format: Video and Audio
Video codec: H.264
Resolution: 1920x1080
Audio file format: Quicktime Movie (AAC)
Include chapter markers: Unchecked
Roles as: Quicktime Movie
2) I run the .mov file in Compressor using the "Disc Burning" preset.
3) I then import the .ac3 and .m2v files that Compressor created into Encore.
4) In Encore, I select both files and go to New > Timeline.
In the Timeline window, the durations on both are the same. But I don't understand why the audio and video are not synced when I preview or when I burn a test DVD. The audio comes in just a tad late.
Video Clip:
Source In: 00;00;00;00
Duration: 00;02;33;29
In-Point: 00;00;00;00
Out-Point: 00;02;33;29
Audio Clip:
Source In: 00;00;00;00
Duration: 00;02;34;00
In-Point: 00;00;00;00
Out-Point: 00;02;34;00
What's puzzling is that two of the 10 videos I've import to Encore are synced perfectly -- same export settings from FCP, same settings Compressor.
Please help.
Thanks!
Mark

Hi Mark.
Do you have any situations where there is more than one video file in a timeline?
Secondly - why are you using H264 HD files for a DVD? This is using lossy compression to make the H264, which is in turn then scaled & even further bitrate reduced for M2V.
I would give it a try rendering an SD video file for use in Encore - not the H264 - and starting out with Dolby Digital or LPCM audio, not AAC.
As with all DVD authoring programs, Encore works best with DVD compliant assets - which you are most definitely using - but I still think you are over-complicating things by using H264/AAC at all.
Eliminating this may help.

IChatAV not doing audio and video with Jabber

I am using a Macbook and have configured iChat to talk to MSN via Jabber using Psi and a server in UK called tuff.org.uk. The buddies show up and I can text chat with them but the buttons for audio and video are greyed out. I have usually use a wireless router with NAT and have played with port forwarding. As an exercise I have tried connecting to the internet via my mobile phone (no NAT) and the results are the same. I am not using the firewall on the Mac.
There are no hardware problems I am aware of, the built-in iSight camera works within iChat etc.
Any help would be appreciated.

Hi Jan,
Rocky's answer is the correct one.
I must admit I am not even sure you were addressing him though as you post looks like a strange ramble and looks like you signed it as Rocky as well.
iChat to iChat over Jabber names is possible as both ends will use the iChat way of doing Video (or Audio) chats.
iChat to another Jabber app will not do Video (Audio) chats.
The only App on a PC that Might be technically capable is Trillian as it does Jabber and AIM. However there seems to be no way to get it's Jabber side to invoke the AIM A/V features to match iChat.
5:32 PM Sunday; March 25, 2007

Audio and video not synchronized in recording made with Lync 2013

There appears to be no forum for the Lync 2013 client yet, so I am posting this in the Lync 2013 server forum.
Environment: Lync 2013 Server and Lync 2013 32-bit client. Only one Lync pool. Conference call was scheduled using "Lync Meeting" in Outlook about a week before the call. Call recorded on a laptop that was plugged into our LAN with an Ethernet
cable.
Problem: User scheduled a conference call with screen sharing (PowerPoint) and recorded the call. The audio and video are not synchronized in the recording. There is several minutes' delay, with the audio lagging behind the PowerPoint. The last slide
on the call was presented, the call ended, and the presenter ended the recording (I was present for all this and can confirm no user error in these steps); however, in the recording, the slides change before the speaker talks about it, and the last
couple of minutes are cut off.
Any ideas on why this happened? Web research has failed me. Thank you.

You may need to lower the recording quality as your PC might not be able to keep up the pace.
Go to Options in Lync client -> Recording -> Select 480p
Then test again
- Belgian Unified Communications Community : http://www.pro-lync.be - MCM/MVP/MCT

Clip stops playing

I am looking at a large number of mov. clips which I am logging and transcribing in a database. Every time I switch over to the database program, the clip stops playing in FCP. Is there a way to display a clip that will continue running while I switch over to a different program?
If not, is there a media player that can display the timecode of .mov clips? I did not find the timecode in Quicktime 10.
Thank you!

Thanks RedTruck, however I am running 10.6 which comes with Quicktime 10. Is there a way to make QT 10 display the timecode? If not, how can I install QT 7? I tried to do it, but the system said it cannot proceed since there is a newer version of the program already installed.
Thanks -
Message was edited by: tgruene

While playing videos on itunes, audio and video will stop and start. It just started doing this recently and it does it with all my itunes videos..help!!

While playing videos on itunes, the audio and video will stop and start several times during playback. This just started recently and it does it on all my videos. Help!!

Try to download the application VLC.
It is a media player that should be able to play any audio or video file you may have. If your videos play flawlessly using that application, then the issue is with iTunes and Quicktime, as they are both essentially similar software types when it comes to playing media.
In that case you may need to install a plug-in file called Perian, in order for the videos to play correctly within iTunes or at least Quicktime...

When I play my Ipod shuffle 3rd gen there's a moment when I start hearing interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.

My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down. First I thought it was the earphones, but I exchanged them for newer ones and so far its the same

You may want to do a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If it's a software or data corruption glitch, the Restore should fix it. After the Restore, reload or resync your songs, and try it again. As a test, you may want to initially select a small number of songs to put back on the shuffle.

My 30 second clip stops playing with 9 frames left. Audio and video are to 30 second mark.

Similar Messages

Maybe you are looking for