My 3G is not coming out of sleep mode

I've had my iPhone for 2 days. Saturday morning when I woke up, the phone would not come out of sleep mode. The phone was on, and would ring when a call came in, but the screen is blank. It wouldn't accept a hard restart for about 30 minutes. My husband was finally able to give it a hard restart. We thought it was a software glitch and was fine. This morning it's the same deal. The phone can be turned on and off, but the screen is black. This time, we have been unsuccessful with a hard restart.
Should I just head back to the store or can I fix this?

My 3G did this, and I went and got the phone replaced.
But make sure that the screen isn't working. I had managed to get mine working, so they didn't believe me, one week later I show back up with the phone working, but no screen. Got changed out real quick at that point.

Similar Messages

OS X 10.9.2 not coming out of sleep mode

Last week I updated my computer to OS X. Now I am starting to have issues. I am unable to wake my computer from sleep mode with my mouse or keyboard. I have to push and hold the power button for it to restart. Any suggestions or has anyone else had this?

Difficult to say what your issue is with not too much information. I would start buy doing some basics, Repair Disk Permissions (Disk Utility) 2-3 tiems, and reset the SMC and PRAM each 2-3 times. If you don' t know how to do the SMC & PRAM resets please click Intel iMac SMC and PRAM resets for instructions.

HP LaserJet P3005x will not come out of sleep mode

Printer will not come out of sleep mode (after being in sleep mode for an extended period of time (over 24 hrs)). When this happens, I can not ping the printer and pressing any of the buttons on the printer will not bring it out of sleep mode. I'm testing now to see if I can recreate this with the printer attached to my PC via USB.

Hi arosecarter,
I understand your monitor is not coming out of sleep mode. Take a look at the following support document, Resolving Problems with Sleep and Hibernate Modes (Windows 7). Step 3 might be of particular interest to you, as you mentioned your keyboard and mouse are not really working for you either. Perhaps it is another connected device that is causing the issue? Anyway, hopefully this document will be of help to you. Best of luck. Have a wonderful day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?

My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

Locked out of machine after coming out of sleep mode (passwd not accepted)

info macbook (intel) 10.5.1 (was upgraded from Tiger)
single user setup
after waking up machine or coming out of sleep mode (i.e lifting lid) occasionally cannot login at all, password is refused. Multiple failed attempts. Its not a problem of caps lock on.
Only solution is to force power down of machine and then OS comes back up, HOWEVER, without demanding a password after power up (hardly very secure), afterwards it may work OK for a few days (with a number of sleep cycles) before same login problem happens again.
Is this a known problem?

Please do both of the following:
1) Turn the computer off. Press and hold shift. Turn the computer on. Continue to hold shift until you see the spinning gear below the Apple logo. Once it is started up, log in. Does it do the same thing here? If it works, please know this is not a fix, just an isolation step.
2) Test this in another user account on the computer. If you don't have one, create one in: Apple menu> System Preferences> Accounts. Click the lock in the lower left corner if it is locked and enter your password. Click the + just above the lock and type in "test" for all the fields it asks for. If you are on 10.4 or earlier, check off "Allow user to administer this computer". If you are on Leopard, make the account type an Administrator. Click "Create account". Click the Apple menu and select the last item ("Log Out" Account name). Log in as the test account and test. Note: You will have to set it to ask you for a password when waking from sleep (Apple> System Prefernces> Security> Require password to wake this computer from sleep or screen saver)
Let me know the result of those tests. Please make sure to try both, as they will allow me to see what may be causing the issue.

Display is all snow coming out of Sleep mode

Just replaced a 17" LCD (using the mini-DVI-to-VGA) with a new Acer 24" widescreen LCD (using mini-DVI-to-DVI). After a little fiddling with the profile, I've got a pretty nice picture. Problem: coming out of sleep mode, the screen is all snow. If I pop the monitor off and on, everything comes back normal. I did NOT have this problem with the older 17". This is more of an annoyance than a major issue, since just a couple of hits of the on-off button correct it. But it ain't right, so I'm hoping I can fix it for good. It happens whether the Mini goes to sleep by itself or if I put it to sleep. I don't know if it's a DVI issue, monitor issue, or something goofy with the Mini's video.
I did a search and found similar issues, but not exactly the same, and saw no suggested resolutions that fixed them. Any suggestions would be greatly appreciated!
Thanks ...
Ed

The 9400M device driver on our Macs appears to be really bad.
My buddy tried to put a Sharp LCD projector on the external port on his Mac laptop, which also had a Nvidia 9400M, and it was not usable. The picture kept coming and going. The projector screen would go blank, then a picture would come up, go blank, and then the picture would come back again, over and over. Being an experienced Mac, PC, and Linux user, I attempted to help him get it working using the display properties page in the System Preferences. Nothing helped.
I'm having similar troubles with the second port on my 9400M on my new Mac mini.
The primary display is fine. I have a 24" Acer LCD on the miniport to DVI converter for my second display, and it works most of the time, however the picture goes to snow fairly often, and blacks out sometimes, too. It usually comes back. Occasionally, I have to power cycle the LCD to get the picture back.
Seeing similar problems with two different DVI display devices, when these devices work fine on our PCs, seems to point the problem at the Mac Nvidia display driver.

Recently having problem with flickering on monitor (viewsonic vg2436wm). When coming out of sleep mode. The screen goes gray, sometime out. Have to press power button to get screen on. Problem stops.

Recently having problem with flickering on monitor (viewsonic vg2436wm). When coming out of sleep mode. It will flicker, the screen goes gray, sometime out. Have to press power button to get screen on. Problem stops. Getting more frequent. After sometime problem stops. My system is a Mac Mini 2010, 2.4 intel core 2 duo, 2 GB, running OSX10.8.5

See if it's related to this...
The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

Why does my MAC sometimes crash when coming out of sleep mode?

My mac freezea sometimes when coming out of sleep mode, and occasionally the screen will go black. At other times I will be using the MAC and it will just freeze. The only way to get out of it is to kill power and reboot. It seems to be happening more frequently.
It was suggested that I fix permissions and start in sleep mode. This has helped in the past, and I am going to do it again now. I also recently upgraded to 10.6.8, and after that the crashes were fewer, but now they are increasing again.
I am including a log of the recent crash a few minutes ago.
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:15 AM com.apple.launchd.peruser.501[94] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12/23/11 11:41:23 AM com.apple.launchd.peruser.501[94] (com.apple.Kerberos.renew.plist[116]) Exited with exit code: 1
12/23/11 11:41:34 AM com.apple.WindowServer[71] Fri Dec 23 11:41:34 Macintosh.local WindowServer[71] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory

Okay thanks, but I am a newbie who is not a very tech kind of a person. The only periphals I have are a kodak camera dock, a Canon 310 copier/fax/scanner and a pair of altec speakers. How do I determine if they all have drivers for my MAC? They all seem to work okay, if that is a sign, though the Kodak camera Dock is a bit slow. How also do I determine if they are Apple energy compatible? With each of these peripherals, do I simply disconnect them from my MAC one at a time to see if there improvement?

Cannot Connect to AE After Coming out of Sleep Mode

This happens on both my iMac and Powerbook. I don't normally use wireless on the iMac but I discovered that both computers are having the same issue when troubleshooting. When coming out of Sleep mode, the Airport device cannot connect to the Airport Express. The only thing that can consistently connect is my Blackberry.
I know it's not a reception problem as when I am able to connect, the signal is strong and speeds are very good.
Some things I have tried to fix the problem have worked but not consistently as the problem keeps happening:
-Turn Airport off and back on (On the computer)
-Unplug and plug back in the AE
-Turn off MAC Address Filtering
-Factory reset the Airport Express
-Select the Join Other Network option and re-enter my wpa2 credentials
-Uncheck Closed Network option
What could be the problem? I'm really thinking there is a software bug somewhere. I have also noticed if I make any changes in the Airport Utility the AE never recovers as it stays a solid amber. I have to power cycle the device.
It's using software version 6.3 and all my OS X updates are the latest. This is very frustrating. Any help appreciated.

I have tried both remedies mentioned above. I double-checked and my network is listed in the wireless advanced settings. It's the only network in my list. Airport is at the top in my Network Preferences as well.
I was hoping the update to 10.5.8 would help but the problem keeps occurring. One thing I have tried is leaving the "Closed Network Option" unchecked for my AE. Now, I am discovering when exiting sleep mode, I see my network but when it tries to connect, I receive the error "Connection Timeout". This happens on both computers.
The only thing that works the most consistently is unplugging the AE and plugging back in. Once I'm connected, it works great.
I tried using iStumbler to see if there were any other networks using the same channel but that looks okay.
I guess I can try using a different security setting other than WPA2, but then that is not really a solution. I'm about ready to just try some other newer wireless solution. It used to work flawlessly. I think until 10.5.4, I had no issues.

Airport doesn't locate my network after coming out of sleep mode

Hi, seems that my imac has a hard time connecting with my network when coming out of sleep mode. Even when I choose the proper network, it still asks for my password (even thought it's populated in teh password field) and when I choose OK, it still times out quite often. Eventually if I turn it off and on or restart comp, it comes up OK.
I'm a little afraid to repair permissions as I have a HP C7280 all in one that the general school of thought is don't repair permissions as Leopard thinks they need repair, but in fact are OK and when "repaired" stop the machine from working properly. It took me a while to get it going in the first place, I dont want to break it again! Any ideas?? Thanks, Dan

Apple Store currently thinks it's a hardware problem

Why does my Mac Pro open to a fuzzy screen when coming out of sleep mode?

Why does my Mac Pro open to a static-filled screen when coming out of sleep mode?

But does it then come fully awake? My MB Pro comes on with out of focus screen as if in a fog but once it comes awake it clears up, there is a progress bar at the bottom showing the progress from sleep

E9220y hangs when coming out of sleep mode

My new HP Elite e9220y hangs when coming out of sleep mode- When I 'touch a key' or move mouse, power switch on computer turns from yellow to blue, but monitor remains black. Have to force off, and restart. Adjusted power management to 'never' sleep but I was hoping for a more elegant solution.

Quote
Originally posted by southmike
but i would try the settings i used in my psu/sleep thread.
https://forum-en.msi.com/index.php?threadid=43603&sid=
it fixed my hang problems and even got my lights to sleep properly
Southmike, I'm glad I could help you out. When I tried using the settings you stated, it didn't help me resume from standby. However, I did finally get standby to work by first resetting the BIOS to default, and then setting the Power Management to:
ACPI Standby: S3
Call VGA BIOS (no idea what this is): Enable
USB Wakeup: Enable
Power Management/APM: Disable
And, I also disabled a few other things I dont use like onboard Audio and RAID and voila, now WinXP can go into standby and resume from it piece of cake.

IMac doesnt always reconnect when coming out of sleep mode

I have newly converted from pc to mac. I have a new iMac 20" with the Intel Core 2 Duo processor and the new Airport Extreme Base Station. The only problem I seem to have is when my system comes out of sleep mode, it does not always reconnect to the base station. The only option I can see is to turn off the airport on my computer then turn it back on. Is there some other setting or another fix for this? Thanks!
iMac Mac OS X (10.4.9)

Hi Applehave posted a fix for this. I had the same problem on my Macbook.
Go to System prefs>network
Choose Airport in the show field
Under the airport tab choose by default,join preferred network
Any wireless connection listed using WPA or WPA2 security remove using the - option.
change the By default, join option back to Automatic
Re-connect to your router this will add it back into the list and you will reconnect automatically after sleep.
It fixed my problem

A665-s6065 crashes after coming out of sleep mode

I recently upgraded up to 8gb of RAM. Ever since I did this, when my computer comes out of sleep mode, it crashes within a matter of seconds. To get the 8gb of RAM to work in the first place, I had to update my BIOS. So I know that is not the issue.

Most likely, one of these is the culprit.
com.satmap.driver.Satmap 1.0.0d2
com.eltima.ElmediaPlayer.kext 1.0
com.paceap.kext.pacesupport.snowleopard 5.7.2
com.eltima.SyncMate.kext 0.2.5b15
Boot into safe mode (restart holding down SHIFT key). If no KP, then uninstall all of them and reinstall them, one at a time.. If KP, then most likely hardware related. Run the Apple Hardware Test suite, extended tests at least twice, followed by Rember. See
OS X About kernel panics,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics,
How to troubleshoot a kernel panic, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Time Machine crashes external HD coming out of sleep mode

I have a new iMac OS 10.7.3
I am using a SeaGate 1.5 TB external HD for backup.
If I leave the computer on continous everything works fine. It backs up every hour. It has been running fine for over a week.
If I set the iMac in energy saver mode, say 10 minutes, when the iMac comes out of sleep mode there is a warning that Time Machine failed.
I get the following errors messages:
"Time Machine could not complete the Backup"
"Error while creating the Backup Folder"
There is no way to correct it or retry. I have to run disk utility and erase the external HD, re-format, then back everything again.
I would prefer to use the energy save feature of the iMac if I could.
I tried the Apple Support number and they just said leave the iMac in "energy saver NEVER" so the iMac stays on continous.
Any ideas???
Anyone able to let their IMac go in sleep mode with Time Machine turned on???
It seems like a possible bug with 10.7.3???
Tom.........

Pondini,
As far as I can tell the Seagate stays up. While the iMac is in sleep mode the Seagate is still running with all lights on.
I will try contacting Seagate.
I am still hoping someone else has an external HD that works with Time Machine. I did a search and several other people seem to be having similar problems like me.
Tom.......

My 3G is not coming out of sleep mode

Similar Messages

Maybe you are looking for