My 3G is not work from last 2 weeks
I'm using 3G last one year. But thts nt work properly from last 2 weeks ... So pls help me sir
Hi Khaled10
Go to settings
Then networks and connections
Enter mobile network
Network Search Mode only activated this option or change to 3G.
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I
Similar Messages
-
Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
ThanksWithout contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable. -
File sharing is not working from pc to imac os x 10.9.2
file sharing is not working from pc to imac os x 10.9.2
Hello there Karen,
It sounds like you are having to power cycle your modem to get internet back every single day. We can start by troubleshooting your Airport Express to help isolate the issue. I would first perform a Soft Reset, then test the issue again. If needed as a last resort I would then perform a Hard Reset:
Soft reset
Connect the device to power and wait for it to complete its start up process. To learn more about the start up process, please see All about Wi-Fi base station Status Lights (LED).
Press and hold the reset button with a pen, pencil, or straightened paperclip for 1 full second, then release it. The light (LED) will begin flashing amber, indicating that the device is in soft reset mode.
From the AirPort menu bar item, choose the network created by the device (the network name does not change).
Open AirPort Utility from Applications > Utilities.
Select the base station, then click Edit (The Edit window will indicate that the base station is in Soft Reset mode).
Move through the tabs to make changes to your passwords or other settings as needed, and click Update and Continue as required
Quit AirPort Utility.
Hard reset
Press and hold the reset button with a pen, pencil, or straightened paperclip until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
Release the button and the device will reset.
Wait about a minute for the base station to finish restarting, then open AirPort Utility from Applications > Utilities.
Select the base station from Other Wi-Fi Devices, then click Edit.
Select the Other Options button.
Select "Restore previous settings" and click Next until you get to the final window.
AirPort Utility will indicate that Setup is complete. Click Done.
Quit AirPort Utility.
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Drag and Drop not working since last software update
Drag and Drop not working since last software update - this is occuring on Outlook for the mac and I just tried moving an icon on the doc and the same thing occured. YOu can drag but the items will not drop.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Navigation Link not working from save search result
Hello Experts,
We have a requirement in our application which is created from scratch, I have implemenetd save search and its working fine, we have some navigation links in result. these links does not work from save search results moreover it works with normal search.
Can anybody help me out to achieve it.
Thanks in advance,
Madhu OmerHi Madhu,
If you want to trigger cross-component navigation to an overview page, then the following conditions should be satisfied:
1. Your last outbound plug calls method fire_outbound_plug( ).
2. The collection passed in fire_outbound_plug( ) contains two entities - a navigation descriptor as the first entity and a root object of the object you want to navigate to as the second entity.
In your case, is condition 2 satisfied? You can create a navigation descriptor by calling the following method passing its two mandatory importing parameters as indicated:
CL_CRM_UI_DESCRIPTOR_OBJ_SRV=>CREATE_UI_OBJECT_BASED(
EXPORTING
IV_UI_OBJECT_TYPE = * UI object type of object to which you want to navigate *
IV_UI_OBJECT_ACTION = 'B' "for Display
If you keep debugging the standard outbound plugs, then you will see that at some location, SAP will surely be inserting this navigation descriptor object in the collection as first object in the collection when calling fire_outbound_plug( ).
If you still can't trigger navigation, please mention the BOL objects you are working with, the component you have created and where you have used it.
Regards,
Shiromani -
External Task not working from job
Hi,
I am trying to call a batch file which copied fdr files from one folder to another and runs sarmanalyzer to generate csv files in the edq landing area.
The batch file is working fine when called from command prompt or double clicked in the edq server, but does not work as expected when called from project or job.
I generated a log file which confirms that the log file is being executed by the job to the last line, but the file copying and sarmanalyzer commands simply do not work.
Any pointers are greatly appreciated.
Thanks,
SidHi Nick,
Thanks for help!
My bat file runs without any errors from external tasks in EDQ.
The account has full control on all the shared folders i am using.
My script:
set ss_temp_dir=D:\Datanomic\dnDirector\config\landingarea\EDQ_Notification
echo s1 > log.txt
set srm_analyzer_path=\\<appsrvr4>\d$\sba81\siebsrvr\BIN
echo s2 >>log.txt
COPY /Y \\<appsrvr1>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
COPY /Y \\<appsrvr2>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
COPY /Y \\<appsrvr3>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
:: The above copy is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
echo s3 >>log.txt
:: log s1-s2-s3 created in commandarea.
setLocal DisableDelayedExpansion
pushd \\<sharedloc>\siebfile\FDR\
setLocal EnableDelayedExpansion
echo s4 >>log.txt
for /f "tokens=* delims= " %%G in ('dir/b/od T*.fdr') do (set newest=%%G)
echo s5 >>log.txt
copy %newest% %ss_temp_dir%
echo s6 >>log.txt
:: log s4-s5-s6 created in \\<sharedloc>\siebfile\FDR\
pushd %ss_temp_dir%
echo s7 >>log.txt
for %%F in (%ss_temp_dir%\*.fdr) do (
::set outfile=%ss_temp_dir%\%%~nF.csv &&
%srm_analyzer_path%\sarmanalyzer.exe -o %ss_temp_dir%\Snapshot_Working_CSV.csv -x -f %%F
:: The above saqrm_analyzer is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
echo s8 >>log.txt
MOVE /Y %ss_temp_dir%\*.fdr %ss_temp_dir%\BU\
echo s9 >>log.txt
:: The above move is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
::Log s7-s8-s9 created in %ss_temp_dir%
Thanks,
Sid -
Sound not working since last upgrade. Get no sound with Netflix or ABC, NBC,etc. worked fine before last update.
How
do I fix this?Hey Janetna5,
Thanks for the question. Does restarting your iPad help the issue?
Restarting your iOS device
1. Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
2. After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
via iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If not, is it possible that your side switch is toggled to mute sounds? See this resource for information:
Volume buttons and the Side Switch - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9940e758
Mute notifications, alerts, and sound effects. Slide the Side Switch toward the Volume buttons.
The Side Switch doesn’t mute the audio from music, podcasts, movies, and TV shows.
Thanks,
Matt M. -
Dashboard link is not working from BI Publisher
Dashboard link is not working from BI Publisher. Please let me know How to fix this problem.
Please somebody guide me.
Dashboard link is working fine from the Apps Server Machine. But the link is not working from other machines. Do I need to setup machine.domain:<port_number> any where.
Thanks,
Vara -
My mail is not working from my iPod touch. I looked it up and it says it trouble shooting? But they are not giving me anything to fix it. I restored my iPod touch to see if that worked and it didnt. Can anyone help me?
Can you access the account from another device?
Without you telling use the email provider and type of account we can't really help you. -
HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.
HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.) -
MM-Report to see the materials which is not used from last 3 months
Dear All,
I want to find out the materials which are not used from last 3 months.Is there any report?
Thanks
VishalHi
check MB5B
give material and plant there
select valuates stock radio button and NON-Hierarchical representation layout on selection screen
give last three month duration period on selection screen and execute report
and see total Goods receipt and total goods issue for material
Regards
kailas ugale -
File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13
File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
ThanksI hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print -
In 5s, personal hot spot does not work from time to time. Not detected
In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.
Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
also avoid special characters making a password. hashtags or open brackets for example doesn't work too good. -
my phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution
We are all just phone users here, and no-one can hope to provide any advice with so little information to go on as to what exactly has happened. You need to provide some detail.
Maybe you are looking for
-
Battlefield Hardline PC Digital Download Pre-Order issues
Seems there's a couple issues with the "Digital Download" for PC pre-order of Battlefield Hardline. First, the pre-order is not showing up as a $10 certificate promo for Gamersclub, which is should be because all versions of Battlefield Hardline are
-
Licensing Stopped Working Error Message
Can't launch licensed copy of Photoshop Elements 8. Receive error code 150:30 Message says "licensing for this product has stopped working" and asks me to restart computer. I have - same message!
-
Elements 13 crashing when attempting to start
Bought elements and downloaded. When I attempt to click either the organizer or photo editor option from the they both instantly crash. I have not been able to open the program at all. Attempted to run as admin with no luck. This is a fully author
-
REQ: Repeated tags in m4a songs
Requesting features for future iTunes updates Allow iTunes manage repeated tags from m4a songs for add more than one artist or more than one composer, for example M4A format is able to store repeated tags in same file (two or more tags for "Artist",
-
The screenshot attached shows the file question mark labeled "mindwine (winter)" - how do I remove it? It isn't even on my computer anymore.