My 3gs keyboard goes crazy writing something eles!

My 3gs keyborad has become nonresponsive,sometime it becoms crazy like if i press "w" it will write soething eles!What do i do?
Harman Singh

iPhone: Troubleshooting touchscreen response

Similar Messages

Keyboard Going Crazy.

Hi, I own a MacPro 06/07 edition...
I recently upgraded or downgraded (whatever) my videoboard from a x1900xt to a GT8800 because I couldnt stand the noise anymore... so far so good and silent...
what happened reasonably after that, I have no Idea if it has any connection or not, but My keyboard
on the Numpad part is not working the numbers, only Enter, +,-,*,/,=,Clear, Volume controls and Eject control, soh only the numbers aren't, and if I pess 0 it Blocks the computer then I gotta repress "321." and play with it until it goes back to normal, its SOOO WEIRD, and never happened before, and I really use Numpad a lot on Photoshop application and others... so its really a Must, to have the Numpad working properly.
What could have caused that? any configuration on the Keyboard? I didnt even played with it, even though I went there and restore to default, and still is doing that. I can't use the numbers...

Hi, tough to tell at the moment.
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.

Keyboard going crazy, Insanely slow G3 PowerMac

Posted this on MR, will post here too:
Hey guys, my friend is having trouble with her PowerMac G3. It is going insanely slow and the keyboard is in all caps and adding random letters/numbers in. I gave her instructions to reset nvram etc. That didnt work. A typical IM with her now:
Friend 1:53KERWYBOAERDFS BEROKERW
Me 1:53 huh?
Friend 1:53COMPUTER VERY VERYW SLOW
The conversation was really amusing
Anyways, I'm having her try Safe Boot now, though I suspect that won't work. If anyone has any idea on what to do, please do post.
Thanks in advance!! She runs 10.3.9

Hi, Steve -
Welcome to Apple's Discussions.
To avoid wasting time fruitlessly seeking a software solution when there may be none, the first thing to do would be to verify whether the problem may be in the keyboard, such as from a liquid spill.
Ask your friend to try using a different keyboard - if the problem goes away, then the fault lies in the keyboard itself.
Another test - boot the machine to a CD. If the problem goes away, then it is software based; if it does not go away while booted to the CD, the fault is in the hardware.

Keyboard going nuts

I posted a topic about a water spill issue a few weeks ago, and I'm telling you that this laptop gives me anxiety and depression...The keyboard must be damaged, here are some symptoms :
- when i press some numbers, i hear a beeping sound, same beep when you press too many buttons at a time
- then the keyboard goes crazy and starts typing on its own like : zero nine one one one one one one one one etc.... and doesnt stop. the browser goes full screen and it opens inspect element
-after i make it stop numbers except five and six dont work.
- i also noticed that after the water spill the power button didnt have lights but the light came back on and the problem started
I really apreciate your help, and I hope i can fix this without having to replace the keyboard because without the numbers, u cant play video games or type some pretty important things

It will depend on the availability and shipping cost to your place and how flexible you are with the keyboard layout (if you look for a seldom layout expect to pay more).
Check for Ebay and alikes for any T410/T420/T510/T520/W510/W520 keyboard.
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Kernel 2.6.32-ARCH slows down and syslog-ng goes crazy *

Hi, it's a month now that randomly my computer slows down.
I took a look with "iotop" and found that syslog-ng was going crazy writing continuosly to the logfile.
taking a look at these files i found this message that gets written over and over again:
ACPI: EC: input buffer is not empty, aborting transaction
ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AMW0.WMCA] (Node ffff8800bf4182c0), AE_TIME
here is my computer info
2.6.32-ARCH #1 SMP PREEMPT x86_64 Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz GenuineIntel GNU/Linux
Any ideas on what's causing this error??
Last edited by .:B:. (2010-09-30 08:21:58)

Taking a look at dmesg i found this
ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning for \_SB_.PCI0.PEGP.VGA_.MXMI: Excess arguments - needs 1, found 2 (20090903/nspredef-303)
ACPI Warning for \_SB_.PCI0.PEGP.VGA_.MXMS: Excess arguments - needs 1, found 2 (20090903/nspredef-303)
Don't know if it could be of any use..
here is my dmesg|grep ACPI
BIOS-e820: 00000000bfd64000 - 00000000bfd9f000 (ACPI NVS)
BIOS-e820: 00000000bfde3000 - 00000000bfdfe000 (ACPI data)
modified: 00000000bfd64000 - 00000000bfd9f000 (ACPI NVS)
modified: 00000000bfde3000 - 00000000bfdfe000 (ACPI data)
ACPI: RSDP 00000000000f7160 00024 (v02 PTLTD )
ACPI: XSDT 00000000bfdf47ec 0005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
ACPI: FACP 00000000bfde5000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 00000000bfde6000 0939E (v02 Intel CANTIGA 06040000 MSFT 03000000)
ACPI: FACS 00000000bfd9efc0 00040
ACPI: HPET 00000000bfdfdd86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 00000000bfdfddbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: SLIC 00000000bfdfddfa 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
ACPI: APIC 00000000bfdfdf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 00000000bfdfdfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 00000000bfde4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
ACPI: Core revision 20090903
ACPI: bus type pci registered
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
ACPI: SSDT 00000000bfd1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bfd19620 00549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Lid Switch [LID0]
ACPI: Sleep Button [SLPB]
ACPI: WMI: Mapper loaded
acer-wmi: Acer Laptop ACPI-WMI Extras
ACPI: Thermal Zone [TZS0] (55 C)
ACPI: Thermal Zone [TZS1] (56 C)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: Power Button [PWRF]
ACPI: SSDT 00000000bfd1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 00000000bfd1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: AC Adapter [ADP1] (on-line)
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
ACPI Warning for \_SB_.PCI0.PEGP.VGA_.MXMI: Excess arguments - needs 1, found 2 (20090903/nspredef-303)
ACPI Warning for \_SB_.PCI0.PEGP.VGA_.MXMS: Excess arguments - needs 1, found 2 (20090903/nspredef-303)
EDIT:
keeping an eye on kernel.log, i got these errors before it started going nuts
Jan 27 12:31:32 deathstar kernel: CE: hpet increasing min_delta_ns to 15000 nsec
Jan 27 12:32:03 deathstar kernel: CE: hpet increasing min_delta_ns to 22500 nsec
Jan 27 12:52:55 deathstar kernel: CE: hpet increasing min_delta_ns to 33750 nsec
Jan 27 13:26:00 deathstar kernel: CE: hpet increasing min_delta_ns to 50624 nsec
Jan 27 14:01:08 deathstar kernel: ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424)
Jan 27 14:01:08 deathstar kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.TZS0._TMP] (Node ffff8800bf41c700), AE_TIME
Jan 27 14:01:09 deathstar kernel: ACPI: EC: input buffer is not empty, aborting transaction
Jan 27 14:01:09 deathstar kernel: ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424)
Last edited by z3r0 (2010-01-27 13:03:23)

Imac going crazy

Help. My Imac (Intel) running OSX 10.6.7 has started going crazy - writing new file names, sending messages on MS messenger etc. Can anyone help? I tried rebooting after resetting the PRAM but with no luck. Is there anyway to set a safe mode? switch off automatically loaded programmes such as messenger? Has anyone else seen this problem? The machine is switched off pending help - I am writing this from another machine. Thanks

see this on how to boot your Mac into safe mode .
(click on image to enlarge)

When I am on Safari, the page randomly goes back to the previous page I was on. This is really frustrating when I am writing something online because it does not save my work. Fix for this?

When I am on Safari, the page randomly goes back to the previous page I was on. This is really frustrating when I am writing something online because it does not save my work. Fix for this?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

My keyboard occasionally goes crazy, not allowing me to type. Also, cursor goes crazy and opens pages and windows at will. Help!

My typing cursor frequently goes crazy, not allowing me to type and jumping from place to place, deleting letters. Suddenly, a line I have typed will be highlighted and deleted at will. Also, mouse cursor moves at will, opening multiple pages in seconds. Help! What could be causing this, and how can I stop it?
I've had my Macbook pro for over a year and it has never done this before. Restarting the computer fixes the problem temporarily.

My first thought was the hard drive and OS has a built in Sudden Motion Sensor whcih will stop the hard drive heads from crashing into the platters when the computer is moved suddenly. This does work most of the time and could cause some of the tings you are seeing.
But then after reading more of your first post it seems your system and drive is doing some very strange things.
It would be best to first take it into an Apple Genius Bar and have it looked at. They can run tests on it and since it is still in the original 1 year warranty this should not cost you anything even if something needs to be replaced.
You can also run the Apple Hardware Test on it your self by connecting it to the Net by Ethernet cable and booting holding down the d key or the Command+d keys. That will boot the computer from the Apple internet servers and load the AHT.
Good Luck.

My computer is infected with something...the cursor is going crazy. i bought apple to avoid infections and now you want to charge me to get rid of the malware? i paid for protection when i bought the computer. shame on Apple.

my computer is infected with ?malware and it makes the cursor goes crazy. apple support wants to charge me to fix this.
paid more for the apple laptop because it had built in protection. not fair. shame on Apple. can anyone help?

Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem(s)? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, you can’t boot in safe mode. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

When using Live View, site looks great, browser testing goes crazy

I am creating a new website (and I am really unexperienced with Dreamwaver CS5). But when I check my site using "Live View" everything looks great, the way it is supposed to. Then when I go to test it in my browswer (Primary browser is Chrome) it goes crazy: I at first noticed that I had saved one copy as an .asp but then resaved it to .xhtml I did delete the first line of code already that the .asp file created as it kept giving me an error on line 1.
Then I tried to do a spry drop-down menu bar, which I have deleted since I thought I was doing something wrong with that and I should just stick to what I half-way know.
If I were to preview the template page it gives me this error:
This page contains the following errors:
error on line 150 at column 76: error parsing attribute name
Below is a rendering of the page up to the first error.
Here is line 150:
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
If I were to test the index.xhtml page in the browser, it ignores most images (all but one), and the first nav-bar (an editable region) appears to the left instead of under the header. The layout is totally ignored and everything is on the left-hand side of the screen instead of in a two column layout.
I am not testing this on a server just off of my computer.
I am assuming that the error has something to do with the .asp file I first did and when I resaved it, since I don't know what I would be looking for, is still in there screwing it up.
Here is the code from the template page:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Midwest Window Brokers | Page</title>



<style type="text/css">

</style>
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
</head>
<body onload="MM_preloadImages('/images/home2.jpg')">
<div class="container">
<div class="header"><a href="/index.xhtml"><img src="../images/heading.jpg" alt="Midwest Window Brokers, Windows, Siding, Roofing, 605-791-5352" name="Insert_logo" width="950" height="200" align="right" id="Insert_logo" style="background: #FFFFFF; display:block;" /></a>
    <div id="h-navbar1"><a href="/index.xhtml"><img src="/images/home.jpg" alt="home" width="159" height="51" id="Image1" onmouseover="MM_swapImage('Image1','','/images/home2.jpg',1)" onmouseout="MM_swapImgRestore()" /></a><a href="/windows.html"><img src="/images/services.jpg" width="151" height="51" alt="services" /></a><a href="/freebay.xhtml"><img src="/images/specials.jpg" width="153" height="51" alt="specials" /></a><a href="/gallery.html"><img src="/images/gallery.jpg" width="152" height="51" alt="gallery" /></a><a href="/roofing.xhtml"><img src="/images/order.jpg" width="152" height="51" alt="order" /></a><img src="/images/blank.jpg" width="75" height="51" /><img src="/images/facebook.jpg" width="38" height="51" alt="facebook" longdesc="http://facebook.com/midwestwindowbrokers" /><img src="/images/twitter.jpg" width="37" height="51" alt="twitter" longdesc="http://twitter.com/midwestwindow" /><img src="/images/google.jpg" width="42" height="51" alt="google+" longdesc="http://https://plus.google.com/u/0/b/108071947231835835141/108071947231835835141/posts" /></div>
</div>

<div id="h-navbar">
    <div id="h-navbar2">  Content for id "h-navbar2" Goes Here</div>
</div>

<div class="sidebar1">
    <ul class="nav">
    </ul>
    <p> <div id="wufoo-z7x3k1">
Fill out my <a href="http://midwestwindow.wufoo.com/forms/z7x3k1">online form</a>.
</div>
<script type="text/javascript">var z7x3k1;(function(d, t) {
var s = d.createElement(t), options = {
'userName':'midwestwindow',
'formHash':'z7x3k1',
'autoResize':true,
'height':'601',
'async':true,
'header':'show'};
s.src = ('https:' == d.location.protocol ? 'https://' : 'http://') + 'wufoo.com/scripts/embed/form.js';
s.onload = s.onreadystatechange = function() {
var rs = this.readyState; if (rs) if (rs != 'complete') if (rs != 'loaded') return;
try { z7x3k1 = new WufooForm();z7x3k1.initialize(options);z7x3k1.display(); } catch (e) {}};
var scr = d.getElementsByTagName(t)[0], par = scr.parentNode; par.insertBefore(s, scr);
})(document, 'script');</script></p>
    </div>

<div class="content">
    <h1>Instructions</h1>
    <p>Be aware that the CSS for these layouts is heavily commented. If you do most of your work in Design view, have a peek at the code to get tips on working with the CSS for the fixed layouts. You can remove these comments before you launch your site. To learn more about the techniques used in these CSS Layouts, read this article at Adobe's Developer Center - <a href="http://www.adobe.com/go/adc_css_layouts">http://www.adobe.com/go/adc_css_layouts</a>.</p>
    <h2>Clearing Method</h2>
    <p>Because all the columns are floated, this layout uses a clear:both declaration in the .footer rule. This clearing technique forces the .container to understand where the columns end in order to show any borders or background colors you place on the .container. If your design requires you to remove the .footer from the .container, you'll need to use a different clearing method. The most reliable will be to add a <br class="clearfloat" /> or <div class="clearfloat"></div> after your final floated column (but before the .container closes). This will have the same clearing effect.</p>
    <h3>Logo Replacement</h3>
    <p>An image placeholder was used in this layout in the .header where you'll likely want to place a logo. It is recommended that you remove the placeholder and replace it with your own linked logo. </p>
    <p><span style="font-size: 18px; color: #C00; font-weight: bold; font-style: italic;">Logo Replacement</span></p>
    <p> Be aware that if you use the Property inspector to navigate to your logo image using the SRC field (instead of removing and replacing the placeholder), you should remove the inline background and display properties. These inline styles are only used to make the logo placeholder show up in browsers for demonstration purposes. </p>
    <p>To remove the inline styles, make sure your CSS Styles panel is set to Current. Select the image, and in the Properties pane of the CSS Styles panel, right click and delete the display and background properties. (Of course, you can always go directly into the code and delete the inline styles from the image or placeholder there.)</p>
    <h4>Backgrounds</h4>
    <p>By nature, the background color on any div will only show for the length of the content. This means if you're using a background color or border to create the look of a side column, it won't extend all the way to the footer but will stop when the content ends. If the .content div will always contain more content, you can place a border on the .content div to divide it from the column.</p>
    
</div>

<div class="footer">
    <p class="footer"><strong>  <em>References Available!</em> We accept cash, check, Visa, Discover, MasterCard</strong></p>
      Copyright 2012 Midwest Window Brokers Inc. All Rights Reserved.
    </div>
</div>
</body>
</html>

I had saved one copy as an .asp but then resaved it to .xhtml
I'm assuming this is a static web site. Rename (F2) all your pages with .html or .htm extension.
.xhtml is not a valid extension.
Nancy O.

Keyboard gone crazy - writes 'pl' when stroking 'l' etc - on IdeaPad S10e

Suddenly the keyboard is acting very strange - many of the keys is writing something different than what it should. Even dobbelt (and different) characters appears when stroking the key once.
Anyone who have a suggestion how to fix?

Hi you are welcome, and greetings to copenhagen ... sorry i must laughing about "dobbelt" .double...
Now , give you the same hint... try your keyboard in Quickstart ...
or if you have a optical usb-drive check with linux-live-CD ... or a USB-Flash-Device with bootable Ubuntu ...
or borrow from friend... to check out if this crazy keyboard is still under linux or Quickstart (small Linux)...
if it works in normal condition ...there is something wrong with your XP (virus....)
recover your Windows XP...
if you have the same in Quickstart you have to call your local lenovo service...
sincerely KalvinKlein
Want more ? For further information to get the most of your S-Class machine
EnergyManagement
Backup
Windows 7
Clean XP Install
XP Startup
Small WebCam Guide
Screen > 1024x576/600
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

PS2 mouse goes crazy on T8000

Hi there,
When i trie to use a Trust optical mouse with my T8000, this mouse goes crazy. The "internal mouse" in the keyboard keeps working perfectly... but that's who wants to use that?
Ideas anyone?

Hi
It is not easy to explain why this happened. In my opinion you should try with another external mouse. Try also to disable internal mouse while you use an external one.
Check also BIOS settings. There is an option called Pointing Device or something like that. Try to change from Auto-selected to Simultaneous.

Macbook is going crazy!

The battery life is terrible! I have 2 batteries that don't hold much of a charge at all. They each last about an hour just while browsing the web. No flash content either.
My power adapters haven't been working right in a long time, so I called AppleCare. They were really nice, and knew what was going on and offered to help me out. The agent suspected the worst, as I did, and said that there was obviously something wrong with the computer, as I have 2 screwed up batteries and 3 screwed up chargers. The chargers don't charge it right. The LED indicator does whatever it wants and the agent said it was because there were problems with the part of the logic board that controlled charging or something like that. The LED is green when it's charging sometimes, and is orange when it's charged. Or OFF all together when it's charged. They also get dangerously hot, to the point where I can't even pick them up without them burning my hands. I've tried it in multiple outlets, etc. Even in a different state halfway across the country! So again, I took it into the store. They said they again couldn't help me, that I damaged the power adapters myself! That's crazy! They said they couldn't replicate the issue, but strangely enough when I found a power outlet in the store and tried it, it messed up AGAIN!
I've been in touch with Corporate Customer Relations, and they want me to take it back to the store, but there comes a point when you just say NO. I have to drive across town to go there, and I don't have time to screw with those idiots up there anymore. He (Ryan) also suggested an authorized service provider, but they can't help me either. So now, I'm stuck. I don't know what to do now.
Now, the keyboard randomly types things and the trackpad goes crazy. I installed more RAM a while back (so I'm up to 4GB), and it runs as slow as my first 512MB system. It constantly uses 3GB just sitting in the Finder with nothing open. External devices don't work right, or refuse to mount. And my airport card randomly disconnects me from my network.
I am so gentle on these computers, because I bust my tail to afford nice things like Apple Products. I have NO reason to purposely damage products, and that's absolutely crazy to say that I do. I spend a lot of money with these people, and so do countless friends and family members. I thought customer service was a priority, but apparently it's not.
I need help!
< Edited by Host >

I've been in touch with Corporate Customer Relations, and they want me to take it back to the store, but there comes a point when you just say NO.
How do you expect to get anything fixed if you don't want to cooperate with Apple? No one in these forums can magically fix it.
Call Apple back and have them send you a box to ship it in for service. I live 90 miles from an Apple Store, so I sent mine in. Apple pays all shipping, so there is no charge to you. I had the computer back in three days also.
If Apple can't get it fixed after three repair attempts, the usually replace the unit. They did for me. You just need to be patient and follow protocol. It's that simple.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

My Finder is going crazy. Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop. buttons don't work.

My Finder is going crazy. Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop. buttons don't work.

Something else you can try.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist. Move the .plist to your desktop.
Restart and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

Nokia N81 8gb Screen goes crazy

ok so i buaght my Nokia N81 like in january last year and ive been using it quiet regularly....
Until today... I slid the phones slider to reveal the keys to write a text message, when the screen went crazy with funky colours and such lines and random things on the screen. If i slide it up and down while its like this it changes its effects and stuff as if its something to do with the contacts of the slider and the screen. If i let the screen black out into powersaver it returns normal but if i slide it again to close the phone or open it back up it goes nuts again.
i tried leaving the battery out but no use.
LOTS OF HELP please ?
i was thinking a factory reset ??

Hi! I have the same problem as well! And this is the SECOND time this is happening! The first time I took it back to my SP, and they then replaced it with a brand new handset; that was 10 months after using my phone for the first time. Now, 8 months after receiving my brand new handset, I have the same problem again!
What was very strange to me, before it first happened, was that my slider became REALLY tight and difficult to manouevre, so I slid the screen up and down as it felt like there was something obstructing the slider, and out came a clear piece of sticky plastic film... I took no note of it, until the same thing happened to me about 2 weeks before my phone went wonky again.The funny thing is, my fiancé has the 2gb phone, and he seems to have no trouble at all with his handset, and he's now had his phone for more than a year (that's longer than I've had both of my handset before going crazy), so I'm thinking it must be a problem with the N81 8gb models. Now I need to take the phone back AGAIN, which I'm not very happy about... I don't want to have to take my phone back, or repair it, every 8 to 10 months... It's a waste of my time AND money.
Oh, and another thing... when they replaced my handset, I asked them what the problem was with my phone, and they said that they didn't know, but that they couldn't fix it! SERIOUSLY?! So now how exactly will I get to repair my phone if the Nokia technicians can't even find the problem NOR fix it?! I've basically spent ALL this money on a phone that only works for a few months until it's irrepairably broken... I don't think I'll be using another Nokia after this again...
Message Edited by mizrulez on 08-Nov-2009 10:48 AM

My 3gs keyboard goes crazy writing something eles!

Similar Messages

Maybe you are looking for