My 40 gb iPod doesnt show any text on the screen

My 40 gb iPod doesnt show any text on the screen. The screen will light up and there is an audible clicking noise when using the navigation wheel. Hooked up to my iTunes the iPod also no longer shows up. Ive tried reseting with no luck. Any help is appreciated.

If a restore of the iPod in iTunes does not resolve the issue, it's likely that your iPod's screen will need to be replaced.
B-rock

Similar Messages

  • My ipod wont show any notifications on the lock screen and it did before. what should i do to fix this?

    HI so i no longer receive notifications on my lock screen when someone texts me or a twitter notification comes up or anything and i dont know what to do about it

    If this is the problem following the instruction.  Frequently it is a hardware problem.
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    Otherwise try (assuming that other devices see your network)
    - A reset. Nothing wil be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power of and then back on your router.
    - Reset network settings: Settings>Genral>Reset>Reset Network Settings
    iOS: Troubleshooting Wi-Fi networks and connections

  • HT1688 i checked my imei, and it doesnt show any carriers. by the way, my phone is locked. i cant use it. how can i find , which is my carrier?

    how can i find my carrier and, unlocked my phone?

    Call AppleCare with the serial number. They may be able to tell you.

  • So my Ipod Touch restored for some reason, and it doesnt show any of the apps i bought on iTunes. How do I make them come back?

    So my Ipod Touch restored for some reason, and it doesnt show any of the apps i bought on iTunes. How do I make them come back? Please Help

    Redownload them from the iTunes Store. It's free.
    (58292)

  • Please help me out! my ipod doesn't show any thing in my screen.

    please help me out! my ipod doesn't show any thing in my screen. please can someone helphelp me please T^T.
    or could someone teach me to open a ipod photo on. i want to check inside is it find?

    Try resetting it. If that doesn't help, try restoring it.
    There are no user serviceable parts inside an iPod, and opening it will void the warranty.

  • My ipod doesnt play any of my songs

    my ipod doesnt play any of my music, what can i do?

    i have the same problem but i have ios 5.01. how do you unsync? please help, thanks

  • HT1338 software update doesnt show any updates

    My update software doesnt show any updates after is checks but im running on 10.5.8 and i know i need to update..

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether further updates are required.
    You should now see the App Store icon, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
    http://support.apple.com/kb/HT4759
    You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/

  • My macbook, from 2009, doesnt show any picture in a piece of his screen

    My macbook is from 2009 and now a piece from his screen doesnt show any pictures anymore. I went to a shop from Apple and they told me that its a contact problem and to solve this it will cost about U$700, thats almost the price from a new mac! Does that mean that I have to buy a new Mac every 4 years?
    Has someone else the same problem?
    How you solved this?

    Hi there
    The quote for 700 is outrageous. It could be as simple as a loose connection or something not terribly expensive as a new screen. Did they tell you exactly what was to replaced for that 700 dollar diagnosis? Unfortunately, Apple seems to charge you 50 dollars for a screw, no wonder they are doing so well these days. Your Macbook uses a screen made by a manufacturer who makes the same screens for Laptops made by other manufactures who make "PC" laptops. Depending on screen size,you could purchase the screen on Ebay for about 100 dollars. Thats what I did with my MacBook which had a 13.3 inch LG Philips LP133WX1 (TL)(A1) LCD screen. I put it in myself, which is relatively easy. The hard part would be to replace the CCFL bulb inside the LCD if that went, now thats a bit trickier, but that isnt the case here, you are replacing the whole screen. I would call around, but I can almost guarantee you that it would cost you less than 200 dollars total for the screen and a local computer store to install that screen. Call the local shop that specializes in mac first, then call a local PC shop for a second quote to have some leverage. Some places seems to charge double or triple if it has a Apple logo on it.
    Good luck and let us know the outcome.

  • HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time  always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

    put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time  always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

    It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
    As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
    Was there an update maybe ?

  • HT4972 I hv IPhone 4 with iOS version 4.3.3 (8J2), it doesnt show any option to upgrade to iOS5 or any else. Can you guide how to do it.

    I hv IPhone 4 with iOS version 4.3.3 (8J2), it doesnt show any option to upgrade to iOS5 or any else. Can you guide how to do it.

    After updating iTunes to 10.2.2 it wiped out my iPhone, iPad and iPad2 and it will not restore on another pc in the house.  I spent 6 hours restoring the iPhone but the iPad and iPad2 has taken 6 hours going thru every step in the support recommendations as well as 3  hours on the phone with 2 separate techs today.
    I uninstalled and reinstalled, went thru with the tech and edited the registry as well as the msconfig.  Rebooted the PC's, reinstalled, uninstalled all of the anti virus software and did a limited start-up, all to no avail.
    You cannot reinstall the last working version of iTunes because the library is synced with a later version - so I have 2 dead devices.
    Other friends are experiencing the same problem and I know of 2 dozen others experiencing the same issues.
    Apple needs to fix the latest update of iTunes!

  • TS2771 i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO

    i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO so i todd what others did then i did it but it kept showing the apple sign and now turn to blue again the turn yellow now white. Apple please fix it i havent been able to be gone at all past few days because of this also tries to connect with my labtop didnt work whats up with it. for people who didnt update it wait until they fix it beleive me

    it still blinking with the apple sign

  • I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture?

    I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture? has anyone got any ideas as to what the problem is, is it self-repairable or even repairable at al?

    The LCD Display connector has partially come loose from the logic board connector, and simply needs to be pressed back down into place. Or the front screen assembly is now faulty, and needs to be replaced again.

  • My ipod touch shows both white and blue screen and wont come on

    My ipod only shows white and sometime blue screen I have reset it and let the battery go completly dead and tried hooking it back up to charger. Even tried different usb cords and no luck with any of it. I was trying to update its software and then It just done this. It has not been dropped or anything. Any ideas is much appreciated. -Thanks

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Why can't I create a document in my Facebook group on my iPad? It won't let me input any text into the text box field after I create a new document. Thanks.

    Why can't I create a document in my Facebook group on my iPad. It won't let me input any text into the text box field after I create a new document. Thanks.

    Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
    I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
    The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
    I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

  • Need to assign char in o12c to show long text of the char in PI sheet

    Hi, Trying to learn PP-PI.  in o12c t-code, created instruction category u201Ctextu201D under instruction cattype (0) and trying to assign a characteristic (test) which is having char group as u201Cprocess instruction characteristicsu201D and willing to select u201Clong text indictor- Tu201D against this characteristic, but getting the error that u201Cthis characteristic is not supported for long textu201D. Please advise how to set long text indicator so that we can show long text in the pi sheet. Thank you.

    Hi,
    To Maintain Long text for characteristic in O12C , you need to
    1) create the Char in T-code O25C with Data type character and click on Proc.Mgmt tab
    2) Tick unlimited field situated right of Length and SAVE the char
    3) Assign this char in O12C under instruction cattype (0). You can see the indicator in the field Text. Now it will allow to main long text for that char in O12C.
    Hope this will help
    Regards
    Brahmaji D

Maybe you are looking for