My 4500 all in one goes into power save and will not come out of it without pulling the power plug.
I have tried hitting the power button short and long, pushing every button, but it seems the only way out is pulling the power plug.
Thanks for any help.
HI
This is a known issue and HP is working on Firmware to fix this issue. This will be released soon.
So please use the workaround for the time being if the printer goes to power saving mode.
regards
Mugu
---- If my answer was helpful please click the "Kudos" star.
If your problem is solved please click the "Accept as Solution" button ---->
Though I work for HP the post are of my own
Similar Messages
-
Monitor goes into sleep mode and will not wake up
My monitor goes to sleep and will not wake up. I try powering off and that will not respond. I have to unplug the workstation and start back up. I have turn off sleep to never sleep and now it just goes to sleep when Im working.
Hello @rosendahl14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter
reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
I Have a iphone 4s and can't get the charger to come out...it was hard to get out the time before but i thought it was just me so then i charged it last night tryed taking it out and it is stuck on one side and will not come out...any suggestions on how to get it out?
You will just have to carefully pull harder. Push the other side back in so it is aligned, then pull it straight out.
-
I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
I have attempted to update my iPhone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!
Without knowing what you did and exactly what happened (error messages) all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPod Touch will not power up and will not respond to itunes when plugged into a computer
iPod Touch will not power up and will not respond to itunes when plugged to computer, have tried holding both buttons down for 10 secs like support suggest but nothing has happen. Any suggestions?
Try the other actions here:
iOS: Not responding or does not turn on -
I attempted to update my iphone5 to 7.1.1 There was an error and now my phone is erased. I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also, do you remember what the error message said? -
My ipad does not communicate with my iphone on one of my email accounts and will not remove deleted emails that are done on the iphone and vice versa, what setting needs to be changed?
It's my understanding that an iPhone can only sync with one computer. You need to choose one computer. Sounds like it syncs at work, but not at home. If you want to just sync it at home, then you have to make sure the home computer has all the info that you want on it, like music etc. Then you have to deauthorize the work computer for it to sync at home. When you connect it will ask if you want to set up as a new iPhone or restore from backup. If you don't have a backup on the home computer then either way you will be wiped clean. So any photos, contacts, notes etc you have will be erased. You would need to backup or copy your photos from your iPhone. When you connect it to your home computer, it will give you that popup message to open your iPhone files. Then you can copy those photos and save them onto your computer and sync them back in through iTunes.
For your contacts, do you use any type of address book? If so you'll want to back that up and then transfer to your home computer. For notes, you can just email those to yourself and then save that email. I use MobileMe so the contacts issue is easily resolved. -
please help, my ipad mini is gone into to recovery mode after updating to iOS8.1 and even though I restored it through iTunes it still will not come out of recovery mode
Try a Reboot press & hold menu button & power button hold both down until you see Apple Logo you will not lose any data. But you may need to do this more than once. I never use PCs for software upgrades or downloads I always use wifi had no problems with iOS 8.1 B sydd
-
My Ipod will not turn on. I held down the power and home button for several seconds, and the apple sign shows up. Itunes doesn't even recognize my Ipod. HELP!!!!
How do I restore my Ipod when Itunes doesn't even recognize it???
I don't care even if I loose all my songs and apps, I just want me Ipod to work again!!!
PLEASE HELP!!!! THANKS IN ADVANCEI ended up on this link, which related to my problem:
http://support.apple.com/kb/ht1808
When I got to step #3 (While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.) my Ipod would not turn on, and Itunes did not recognize my Ipod. :S -
MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer. -
Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
PLEASE PLEASE HELP ME thanks for your timeThis is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.
-
after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
My phone will not come on because it says i need to plug it into itunes, so i did and now it will not restore. I have changed the USB cable, used different USB ports and used a different computer however errors still keep happening. Please help.
You need to tell us exactly what the errors your getting say.
-
I'm not a "Cloud" member. I just upgraded to Lightroom 6 from Lightroom 5. All was working well yesterday. Today Lightroom will not open (Windows 7). I see the logo photo over my Lightroom platform but nothing loads and I see "Lightroom not responding." I checked the catalogs and see that lrcat-Journal and lrcat-Lock have been created every time I try to open. I have a backup from the first day I upgraded, but Lightroom doesn't want to access it. Should I reinstall?
Well, is the catalogue (and the folder it is in) writable? Have you actually checked the permissions? Lightroom won't be spitting out the error just to tick you off, and - computer wizard or not - this sounds very much like something you'll have to fix at the OS level: it's probably nothing to do with Lightroom or those funny lads at Adobe.
Some light reading for you, courtesy of the site search: https://forums.adobe.com/search.jspa?q=%22+not+writable+and+cannot+be+opened%22&place=%2Fp laces%2F1383621&depth=ALL
It would help to know your OS.
Maybe you are looking for
-
I am getting this error: Oracle XML Developers Kit 10.1.0.4.2 - Production XML-25011: Error processing XSLT stylesheet: file:///C:/Products/jboss-5.0.1.GA/server/default/deploy/ontrack.ear/ontrack.war/reports/manifest/container_lbl.xsl file:/C:/Produ
-
Ipod mini with Bose Sounddock/remote issues
Just purchased mini & sounddock, but for remote to work, software version must be 2.2 or later; my mini will only update to 1.4.1. Can this be remedied, or do I kiss the remote feature goodbye?
-
Wanting to sign up for free Wi-fi but I need the primary user e-mail address. It's been years since this was set up and I can't remember it or the password. How do I get round this problem? Do I change the primary user e-mail address if so how?
-
Can the i pod Nano 7th Generation be connected to a Bose docking system?
Can the i pod Nano 7th Generation be connected to a Bose docking system? Or is there some other docking system that can be used? I need to play my i-pod Nano over a loudspeaker system of some kind.
-
Ok, how do I get the dang download?! itunes says my phone is upto date. I tried searching through the forum for an answer and couldn't find one. I have windows xp. Thank You to whoever can help me with this.