My 4S wont ring when off, but rings when on.

Ive tried reset and mute button.  It just wont ring when off.  Incoming text and email sounds wont work when off either.

Polyoxide wrote:
Ive tried reset and mute button. It just wont ring when off.  Incoming text and email sounds wont work when off either.
When you say off do you mean your phone is powered off?
If so, that behavior is expected, when your phone is powered off, you won't get anything because it is powered off.

Similar Messages

  • My iphone 3gs shows charging when off but wont charge

    my iphone 3gs shows charging when off but wont charge

    my iphone 3gs shows charging when off but wont charge

  • Sound works when testing, but not when uploaded

    I used the Behaviors pallet to stream my mp3 files, and it
    works fine when tested locally, but as soon as I upload everything
    and test it online, nothing plays. The site is
    www.spidersandsnakes.net/media08.htm.
    Any ideas?

    I suspect this is where my issue lies, but I am not sure how
    to fix it. I have attached some code that defines the image
    location. I am able to successfully retrieve documents with the
    following, is this the same type of scenerio,
    http://www.skytitleagency.com/documents/Land_Contract.doc,
    except in the images folder ?

  • NaN when running, but not when debugging

    Hello out there,
    I am creating a JSP application with JDeveloper, and when I run the application the first time, it works without problems... but when I submit the values again to recalculate, the results of some operations that I'm doing are displayed as NaN.
    Anyway, when I go to the debug feature, and start stepping over each line, and finish the program... the expected values are there! so I'm not able to figure out what's going on there...
    any help will be highly appreciated.

    Read the note in https://wiki.archlinux.org/index.php/St … ot#inittab
    Try https://wiki.archlinux.org/index.php/St … sh_profile instead.

  • Podcasts won't refresh when subscribed but will when unsubscribed?!?

    The topic says it all.
    Win 7 Pro 64 bit / iTunes 11.3.1 (the latest) / all other hardware well ahead of spec
    In the past, I'd had an odd phenomenon when refreshing podcasts - old episodes would appear long after they'd been downloaded, played in their entirety, etc. Only 1-2 of them, easily deleted. A pain, but a minor one.
    Now we have a showstopper - podcasts that are subscribed won't update.  The update icon appears etc.
    Then I unsubscribe. Suddenly the podcast in question (e.g. the episode for the most recent day) appears with the cloud download icon as usual.  I can download it with no problem.
    Now the insult-to-injury part:  re-subscribing to the podcast makes the file disappear from my library!
    It's the understatement of the year to say this is contradictory, Bizarro-world behavior.  Devising a desperate, random workaround is all very well but hardly a desirable, permanent fix.
    I have uninstalled. I have manually cleaned.  I have reinstalled. I have burned incense but so far have stopped short of worshiping graven images.
    This is the part where I take a bitter swipe at Apple but even the most phlegmatic user must wonder aloud how such chaos is possible especially given the enormous user base.

    Hi
    All your file references are to your local hard drive, change these to reflect your site structure.
    <link href="file:///C|/Documents and Settings/Pretak/Desktop/ron art/site_layout.css" rel="stylesheet" type="text/css">
    <link href="file:///C|/Documents and Settings/Pretak/Desktop/ron art/site_layout_mainpage.css" rel="stylesheet" type="text/css">
    <script src="file:///C|/Documents and Settings/Pretak/Desktop/ron art/Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
    PZ
    www.pziecina.com

  • Customized chrome works when running, but not when compiling ?

    Dear webmates :
    I have customized my chrome in Flex : it does not show the window container  (transparent) , etc... and works great when I run it... however, when I compile it in order to have the standalone file... it simply works displaying again the window ! what do I have to do ? thanks in advance...

    Hello,
    When you built your installer, did you include all of the dynamically called VIs?  The application builder does not know about dynamically called VIs unless you specifically tell it about them (which of course makes sense, as they are dynamic).  Other potential issues might be the change in behavior of the Current VI's Path constant, or a lack of other dynamically called objects such as dlls or drivers.  Make sure that the dynamically called VIs have been properly installed on your target computer in the desired paths.  If that doesn't solve the problem then make sure that your application has good error handling capabilities (i.e. handles all error wires and eventually passes them to an error handler) so that you can use the error to determine which files are missing or in the wrong location.
    Regards,
    Ryan K.

  • Not authorized when suspensing, but not when logged in from terminal

    Hi All,
    I have the following line in my inittab, to start an X server for the user "cedric"
    x:5:once:/bin/su cedric -l -c "/bin/bash --login -c /usr/bin/startx >/dev/null 2>&1"
    This works great, my X server is started during the startup of the rest of the services. when I then try to mouns an USB stick, suspend or reboot the machine, I get the message "Not autorized"
    When I then kill X, login from a terminal, and then start X, everything works great, I can mount USB sticks, and suspend my machine from the lxde session without any problem, the message "not autorized" never comes up anymore
    What have I missed in the iniitab line above? Is there a better way to autostart the X server? How can I debug these messages?
    Best regards,
    Cedric

    Read the note in https://wiki.archlinux.org/index.php/St … ot#inittab
    Try https://wiki.archlinux.org/index.php/St … sh_profile instead.

  • 2330 noise when talking but not when connecting th...

    I have bought  the 2330 three days ago
    Its the second phone because the first one had a screen problem.
    With this one the problem is that when i call someone i hear a noise from the earphone especially when iam at home or indoor places. Also the person that i call listens to the same or simillar noise.
    The bizarre is that when i connect the hands free equipment everything is just perfect.
    Anyone has an answer on that or has someone the same problem with me ??

    I do not hear a noise on my 2330.
    Is this your second 2330?
    By the way, does your nokia 2330 have the correct time to the minute? My 2330 is slow by a 1 minute 37 seconds after the time is auto updated.

  • Project works when tested but RowConflicts when deployed

    I have a project page with some pretty simple code to open a table and update it. The fields are all open for update and virtual forms configured to participate in a save action. The save works and commits the changes to the database (oracle) when using the creator studio to build/run the project. However, when I deploy the WAR to the Sun Application server using the same driver setup, I get a ROW_UPDATE_CONFLICT error on the rows that have been modified. This is a complete show stopper. What am I missing here?
    javax.servlet.ServletException: Number of conflicts while synchronizing: 3 SyncResolver.UPDATE_ROW_CONFLICT row 2 values changed in database
    root cause
    java.lang.RuntimeException: Number of conflicts while synchronizing: 3 SyncResolver.UPDATE_ROW_CONFLICT row 2 values changed in database

    I got exactly the same thing as you did, except that I am using Tomcat 5.5.17 instead.
    It has wasted me a lot of time.
    Message was edited by:
    Mountainer

  • Why do inserted PIX disappear when sent, but appear when returned by receiver?

    When a number of PIX are cut and pasted from one e-mail to another e-mail the pix disappear at the receiver end or a blank box or space appears. The reply from the receiver shows the embedded PIX. This problem has existed for quite sometime and appears endemic to all provider software. The other providers have similarly been notified without a response or solution. Can the Mozilla team resolve this problem?

    Firefox doesn't do email, it's strictly a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [https://support.mozillamessaging.com/en-US/home] <br />
    or this one <br />
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • MBP  17" running OS10.9.2....... how do I reformat it and then instal OS 10.6.8 on it.... have put in SL disc and pressed C when starting but I cannot install the OS

    I have MBP 17" running OS 10.9.2....... I need to have OS 10.6.8 so I can contiue running Quicken 2006. I have this on my Mac Pro but am switching to iMac and hence will dedicate laptop to finances. I pressed option when starting and got disk utilities and erased the HD..... I put in the Snow Leopard disc and pressed C when starting but then when I try and install it shows icon of my HD and says I cannot start up from that disk....... I get the same thing when I insert the #1 instal disc that came with the computer. How do I instal OS 10.6.8 (if I go recovery mode it will insatll 10.9.2 which I don't want on this laptop.
    Thanks for any help.

    The grey disk says OS 10.6...... i tried it as well as the SL disk with the C pressed....... what happens is that it directs you to agree etc and then asks where you want it installed..... the icon of the computer HD however has the yellow exclammation sign saying I cannot start from that disk.
    My super drive is working.......
    Since I need to get to Quicken for taxes etc what I have done presently is formatted a LaCie rugged drive, partitioned it and when I attach that drive to the MBP and start up again I was able to install on the external drive....I am presently downloading the combo upgrade that will take me to 10.6.8
    I still don't understand why it wont instal on the MBP I i know you cannot go earlier than what the machine shipped with but since this is 10.6 it should.I have a Mac Pro with one internal drive running 10.9.2 and the other 10.6.8 and I'd select the earlier system to start when I wanted to do my finances. I have upgraded to an iMac and hence cannot use that for acessing the earlier system
    Interestingly, I partitioned another LaCie drive and was able when running 10.6.8 on Mac Pro to install on the external drive...... however when selecting that ext. HD for starting it never did restart with it , always restartd using the 10.9.2 system that was actiually on the other disc.

  • My phone vibrates when ringing but no sound comes out . When i go in to settings and choose a ring tone it plays then but not when getting a call, the silent switch on the side has also stoped vibrating when swithed on or off

    My phone only vibrated when i have a call be no sound comes out .in the settings it produces sound when i choose a ring tone ! The silence button on the side would vibrate when turned on or off but this also no longer does this !
    Im not very good with tech so bare with me

    Hi Bradybunch364,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help with troubleshooting sound issues on an iPhone:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Jeremy

  • I have a frustrating problem with my iPhone 5 post ios8 installation. The ring tone won't sound when phone is locked/switched off, although the vibration does work. I think it has something to do with "do not disturb"

    Hi, I have a frustrating problem that seems to have occurred post iOS 8 installation. When my iphone5 is switched off the ring tone fails to sound i only get the vibration. If i am using my phone and a have an incoming call then the ring tone works as normal. I think it has something to do with "do not disturb" ... i see from the menu in "do not disturb" that under the heading "silence" there are two options "always" and "only when the phone is locked" This does not seem to make sense as i have to choose one or the other!
    If anybody can help advise me on this problem i would be very grateful.
    Thanks

    Hello Mogulman46,
    So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off. 
    Use Do Not Disturb on your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5463
    Regards,
    -Norm G. 

  • When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

    When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

    Hello there, RobenCaatje.
    The following Knowledge Base article is specific for the issue you're describing:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Specifically:
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    Go to settings/music/volume limit tap on that.  Make sure it is set to OFF and when you tap it that the slider is at max

Maybe you are looking for