My 4th gen. ipod will not keep a charge, wont play music and keeps freezing-did full restore/updates already - please help!!

The ipod will charge and allow me to access it/touch screen still works. When you click on an ap it is very delayed accessing. Sometimes music takes a while to show up, other times it freezes altogether.
Started a few weeks ago after it sat in a hot vehicle (not in use) for a few hours and hasnt worked since!

If you still have problems after restoring the iPod to factory defaults/new iPod you very likely have a hardware problem.  Excessive heat will permenently degrade the batter.  I would make an appointment at the Genius Bar of an Apple store.

Similar Messages

  • My nano 4th Gen. ipod will not sync album I just purchased from itunes.  It says it is syncing but does not. Can anyone help?

    My Nano 4th gen. ipod will not sync my new album I just purchased from itunes store.  It says it is syncing but does not transfer music.  can anyone help?  I am using windows 7.
    thanks,
    B.H.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • 4th Gen iPod will not mount or connect to Windows

    Hi, one of my iPods will not connect to Windows XP. Its a 4th Gen 40gb non photo iPod
    The iPod still plays and works "normally" as a portable device (ie I can play music), but I cannot connect it to my pc at all.
    When I plug it in via either USB or Firewire ports the iPod disc whirrs and gets stuck in a loop (that can last over 2 hours plus) before i need to reset it in order to disconnect it from the pc.
    When I connect, it doesn't launch iTunes as it should.
    It doesn't appear in My Computer.
    It doesnt appear in Computer Management>Disk Management
    Latest iPod updater cannot read it (even when put in disk mode) and tells me that it can't mount the iPod.
    Also, the iPod has since started to mess my PC up - it will not allow the PC to boot up with the iPod connected. If I connect the iPod to the PC with iTunes already launched it causes iTunes to freeze and crash. When I go to restart the PC, Windows will not shutdown.
    Getting sick now - any ideas please (besides throwing it out the window!)?
    It's weird how the iPod still plays, but it will not connect to the PC when my other 4G 30gb photo and Shuffle will.

    I have tried resetting and restoring the ipod before, and I have put it into disk mode too (in order to restore it) but the ipod updater said it could not mount it
    However, I did try Deanz advice by putting it into disk mode whilst attached to the mains and then connecting it to the PC has at least enabled me to see it in "My Computer" for the first time as (the "F" drive), even if iTunes is not recognising it.
    However, when I attempt to see the ipod in Disk Management I get the same problem outlined above in an earlier post (grey screen).
    If I try to browse the iPod via My computer that task freezes. Task Manager claims the function is "not responding"
    Grrrrrrrrrrrrrrrrrr
    Anyway, all my music is backed up so that's not a problem. The iPod works, but I can't update it so it could be worse. Not really sure how to remap the iPod to a different drive letter
    [edit] During the process of closing down the non-responsive "My Computer", Windows had a major gimp out and completely froze me out until I reset the ipod an put it back into disc mode (again). Then Windows reappeared in the same state before it crashed. I suspect this is due to some kind of conflict with the iPod as it has done this a few times now since my iPod started acting up (and only when the iPod is connected).
    Thinking of some elaborate home insurance claim now..............

  • Ipod Will not Sync - Songs skip wont play

    Hi,
    I am using windows vista 64 and ITunes 8.
    Whenever I attempt to sync my music (especially LARGE play lists) iTunes will pause wait ages, even tho the ipod is already attached it will reattach itself (ie windows will ask again if I would like to use it for ready boost) then it will start to sync. Everything appears fine but the music will not play. When I attempt to play a a song it will skip around and play 1 second of the start of the song then the a bit from the middle then the start again then either crash the iPod or just skip to the next song.
    - I have tried this on 4 different ipods (all 4'th gen) all of which I know work
    - My music is currently being stored on a windows home server and I access it over a network.
    I have reinstalled iTunes 5 times. It used to work fine with itunes 7.7 this only has happened since I upgraded, and yes I know the first release of iTunes 8 was faulty...
    Any Ideas? I have been trying to sort this for 3 weeks now....

    Same here. At time I will end up with a message saying ITunes cannot read the Ipdo please restore...Between those episode, the only way i have found to sync & read complete songs was to sync song by group of 3 or 4...if i try to sync larger group, i will end with song that stops on the Ipdod after 30-40 sec...This problem has occured for more then a year and Imn very tired to reload my 60G 3 songs at the time...:(

  • Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

    Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got  extra money to spend..

    Just what happens when the restore does not complete?
    Error message?
    Does it freeze? Is so what is listed in the status bar of iTunes?

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • I have a 4th gen. ipod touch.  It has software 4.2.1 and itunes always tells me I need to update to ios 6.  I always click download and install.  After the download is complete, nothing happens.  It doesn't install on its own.  Thanks,

    I have a 4th gen. ipod touch.  It has software 4.2.1 and itunes always tells me I need to update to ios 6.  I always click download and install.  After the download is complete, nothing happens.  It doesn't install on its own and there is no option to install manually..  Thanks.

    Are you sure it is a 4G iPod?  Does it have a camera?

  • HT2999 why my ipod will not read a charger?

    why my ipod will not read a charger?

    not read a charger?
    Do you mean when you plug it in it doesn't charge? If so, check your charger and swap it out with another. If the issue persists iwth another charger then it's a problem with your device. take it into the local apple store and have them take a look at it.

  • Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me

    Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me.

    Farooq,
    If you look at the first one, you should be able to align quite easily as follows, View>Smart Guides being your friends:
    1a) ClickDrag the top flower with the Selection Tool (black arrow) so it is clear of the pointy part;
    1b) Click an empty spot on the Artboard to deselect, then ClickDrag the top flower by its bottom Anchor Point (Smart Guides say anchor when you are close enough to grab it) down to snap to the top Anchor Point on the pointy part (Smart Guides say anchor when you are close enough);
    1c) Do the same for the boroom flower.
    If you look at the third one, to get the triangles and the hexagon sized and aligned precisely, you may, creating them with stroke and no fill:
    3a) Click with the Polygon Tool and select a suitable/chosen Radius and 6 Sides, then Object>Transform>Rotate by 30 degrees (or use the Rotate option in the Transform palette), you may Object>Transform>Reset Bounding Box to have it look nicer;
    3b) Click with the Polygon Tool and select the same Radius and 3 sides, then deselect and ClickDrag the top Anchor Point to snap to the top Anchor Point of the hexagon;
    3c) Object>Transform>Rotate by 180 degrees clicking Copy, deselect, and ClickDrag the bottom Anchor Point to snap to the bottomAnchor Point of the hexagon;
    3d) Select all and Ctrl/Cmd+G to Group (for alignment purposes, you will know why if you try without grouping, see below).
    To create full symmetry, you may use circles rather than almost circular ellipses; you may:
    3d) Click with the Ellipse Tool and select a suitable/chosen Width = height;
    3e) Object>Transform>Move a copy vertically by the Height (= Width) twice (or you may Ctrl/Cmd+D to repeat), to get three circles over one another with no gaps;
    3f) Select the topmost and bottommost ones and Object>Transform>Rotate a copy by 120 degrees twice, to have all the seven circles precisley touching one another; you may Group them, but it is not necessary.
    To have everything aligned, just:
    3g) Select everything and click Vertical Align Center and Horizontal Align Center in the Align palette; you may click the pointy group or the circles ojnce more before aligning if you want to keep it in place (that will make it the key object that the other set is aligned to).
    These ways may also help you further.
    Edit: About half an hour after midnight here. High time to attend to other duties, before the sun is up.

  • TS1424 my itunes will NOT let me buy any explicit music and i dont know why can anyone help me?

    my itunes will NOT let me buy any explicit music and i dont know why can anyone help me?

    Either:
    iTunes is trying to protect you from the ugly side of the adult world
    Your parents are trying to protect you from the ugly side of the adult world
    You've turned on the Parental/Content Restrictions by mistake
    Look in iTunes at Edit/Preferences/Parental>Content Restrictions>Restrict explicit content and make sure the tick is not in the checkbox.
    Tango1214, you are reminded

  • Apple mobile device will not install on my computer (hp pavilion g7-1237 dx Notebook PC). Can someone please help me?

    Apple mobile device will not install on my computer (hp pavilion g7-1237 dx Notebook PC). Can someone please help me?

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help

    My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help! xx

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • 2nd Gen iPod will not charge in Windows 7 machine.

    My 2nd Gen ipod will sync to iTunes just fine, but will not charge.  Windows 7 shows a problem (yellow triangle) in Devices.  I've got the latest Windows Updates, iTunes version, and iPod update.  It works fine with our Windows Vista machines, just not my newer Win 7 laptop.  What is going on?

    Is the iPod being plugged into a high powered USB 2.0 port on the Win 7 machine?  Are there any other USB devices plugged into the Win 7 machine? If so, remove them, reboot the machine and reconnect the Shuffle.
    B-rock

  • 3rd gen iPod will not complete the RESTORE process with new Hard Drive

    I have an 3rd gen iPod and I have replaced the hard drive with a newer MK2006GAL. The drive formats fine with a USB cable, formating Mac OS Extended Journaled. It will not complete a "restore" when connected via FireWire in iTunes or with any ipod updater utility. this happens on any mac (we have several). It will not even see the iPod updater when connected via USB and it says MUST CONNECT WITH A FIREWIRE CABLE. It will not format with Disk Utility when connected with the Apple FireWire cable only USB. This is the second new hard drive I have tried. I thought the first "replacement drive" was bad. Turns out it must be something else. Does this sound like a bad battery or motherboard or bad FireWire cable to you? The connectors look fine (under magnification). other problems, while this iPod will not Restore properly, it also will not turn off.
    Would like to know if anyone else has seen this trouble.
    thanks.
    Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod   Mac OS X (10.3.9)  
    Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod   Mac OS X (10.3.9)  
    Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod   Mac OS X (10.3.9)  

    Hmm now getting this message.
    "The ipod "ipod" could not be restored.An Unknown Error occured (1429)".
    It still will not format. Does anyone know what a 1429 error is?
    Powermac G4 1.25 MDD, OS9/OSX Mac OS X (10.3.9)

  • HT1727 the computer my itunes were on completely crashed. i rebuilt my files on a new computer but my 4th generation ipod will not sync with the new library. what can i do to have the two devices work together again?

    the computer my itunes were on completely crashed, nothing was recoverable. i bought a new computer but my ipod would not sync with it. i rebuilt my itunes library from scratch but my ipod will not sync with it.how do i get the two devices to sync?

    Follow the steps given here…
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Maybe you are looking for

  • Problem when installing oracle 9i

    hi all, After I put oracle 9i CD into my CD ROM, it was no reaction. Also, I double click 9i setup icon, it was no reaction too. I am sure the CD ROM and the CD's are fine. Do anyone knows what is happening? Thanks. Amy

  • Lock Timed out exception in stateful Session Bean

    Hi All, We have a stateful session bean and put the reference of the bean in HttpSession and retrieve it from other JSP. While calling a method from bean, we are often getting the following exception. Any help please? weblogic.ejb.extensions.LockTime

  • Itunes dosen't recognise iphone

    tried reinstalling the itunes it was working good till last night but now itunes dosent recognise.....

  • How can I save edited photos to the photostream?

    When I edit a picture in iPhoto, the photostream in the app shows the edited photo...however it does not truly sync to the photosstream as the photos app on both the iPad and the iPhone show the old picture...any thoughts?

  • Inserting click boxes in Q slides in Captivate 5.5

    I don't have the option to insert click boxes in question slides in my version of Captivate (5.5), which I would like to do to create a quiz with multiple reults per these instructions: http://kb2.adobe.com/community/publishing/852/cpsid_85255.html).