My 4th generation iPod has iTunes logo and power cord on sreen, how do I fix it

My 4th generation iPod screen is locked with a picture of the power cord and iTunes logo, how do I fix it?

just plug it into the computer and follow onscreen directions

Similar Messages

  • I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT4623 Did update now phone has iTunes logo with power cord and can't get past it

    I have completed the new update to my iPhone and now can't get past the iTunes logo on my phone, all my music is on a computer that is now not working, how can I fix my phone to get past this??

    I agree on the updates, I wish it wasn't automatic.  I completely, totally agree.
    Keep in mind, you can't complain about having CM7 messed up from webOS updates. CM7 is not supported on this hardware by HP. CM7 is all on you.
    There was no webOS upgrade in your case.  The upgrade was stopped midstream, possibly damaging the TouchPad.
    I asked 'why did you do that', because I actually want to know why in the world anyone would ever stop a firmware upgrade.  It's like teasing a crocodile with chicken meat and wondering why it bit your hand off.  You seem to know your way around technology, so I can't understand why you'd stop a firmware upgrade.  I'm sure you know how dangerous that is.  I did, in fact, provide a constructive suggestion.  But not a solution, because I don't know of one.  I haven't run across anyone who stopped their TP's upgrade process midstream.  I am sure it's happened before somewhere, I just don't know about it.

  • ITunes logo and usb cord showing on iPad 2 after iOS 8.02 update

    I updated my iPad 2 last night with ios8.02.   Immediately after the update, my iPad was frozen with the iTunes logo and power cord.  When I conned to iTunes, the error message says my iPad is set to recovery mode and when selecting the option to restore, the message "Are you sure you want to restore the iPad “iPad” to its factory settings? All of your media and other data will be erased, and the newest version of the iPad software will be installed" appears. 
    Well, I obviously do not want to lose the last photos of my mother who passed away on July 1st, not to mention the countless things included in the full 64 GB hard drive, so I called Apple support. Their advice was to restore and hope iCloud backup has the data.
    I'm on hold right now waiting for a "Senior Advisor" to provide a solution.  I have been on hold for 49 min 58 seconds.
    Does anyone have a fixe to this un-vetted upgrade release gaff? Whoever authorized this release needs to leave Apple and apply for a job selling popcorn with the LA Clippers.

    Hi,
    I had the same problem for the past 24 hours.
    I found the below advice resolved my problem completely.
    Basically, rebooted mbp, restored iPad from previous back up = iPad 3 back to normal.
    Phew...that was a tad frightening !
    Hope it helps you....
    If you can't update or restore your iPhone, iPad, or iPod
    Kind regards,

  • I have a 4th generation ipod classic (click wheel) and it's giving me a sad ipod error as well as not mounting in itunes... I hear a clicking inside when it is connected to power but nothing is working. Help!

    I have a 4th generation ipod classic (click wheel) and it's giving me a sad ipod error as well as not mounting in itunes... I hear a clicking inside when it is connected to power but nothing is working. Help!

    You won't believe this but a friend of mine (who happens to be an Apple Genius) told me to put a towel or cloth on a sturdy countertop (I know this may sound weird) but hold the selct button (in the center) and menu part of the wheel at the same time until an Apple logo comes up on the screen and then quickly turn the ipod on it's side and wack it on the counter where the towel is so as not to damage anything cosmetically. It seems the clicking is the hard drive reader is stuck and this dislodges it. Mine works now (no clicking) and all seems to be well again. Who knew?

  • IPhone has iTunes logo and USB logo on screen

    iPhone has iTunes logo and USB logo on screen

    That is its way of telling you to connect it to your computer, and open iTunes (if it doesn't open automatically).

  • TS1424 how do i remove the picture of the itunes logo and chargin cord from mu ipad? it is frozen

    How do I remove the picture of the itunes logo and charging cord from my ipad?  it is frozen! I was going to download the ios7 and this popped up!

    The image indicates that the iPad has gone into recovery mode, you will need to do as image shows and use the cable to connect the iPad to your computer's iTunes (you will need an up-to-date version of iTunes on your computer) : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it

  • Accidentally upgraded to ios 6.1.3 and now my iPhone shows an iTunes logo and usb cord. How to fix this?

    The first thing happened was an apple logo blinking on and off. tried pressing home and power button together then now it shows an iTunes logo and usb cord. Please help me!

    shut down the phone first.
    hold the Home button and then connect it to iTunes, keep pressing the home key till the time you see a message on iTunes saying 'itunes has detected a device in recovery mode'  click ok a,release home key and click on Restore 

  • Iphone 4s "slide to unlock & slide to turn off" has stopped working and i cant unlock phone, how can i fix it please ?

    iphone 4s "slide to unlock & slide to turn off" has stopped working and i cant unlock phone, how can i fix it please ?
    when i conect to itunes to restore it tells me "find my iphone must be turned off" but of course i cant unlock my phone to do that.
    im stuck please help..

    How about a hard reset.  Hold the top button down along with the home button until the phone turns off.

  • I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

    I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

    Hi there Rlong50,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

  • Update problem - will not start up, showing itunes logo and power cable

    I tried to install the latest update this morning and now my iphone 5 will not start up.  When I press the start button the apple logo appears then the screen shows an itunes logo and a picture of the power cable.  I have started up itunes on my laptop and plugged the phone into it, but still the same problem.
    Help!!!

    That screen means it has entered recovery mode and you must use the recovery mode instructions in http://support.apple.com/kb/HT1808 to connect to a computer running iTunes.  In summary:

  • IPhone just shows pic of iTunes logo and USB cord after updating to iOS7, iPhone just shows pic of iTunes logo and USB cord after updating to iOS7

    We were updating one of our iphones and it just shows an itunes logo and a usb cord image on the screen. No matter how much we restart, restart the computer, etc, that's all we get on the phone.
    Has anyone else experienced this or have any idea what we do from here?

    I'm seeing LOTS of this, both with Mac and PC-based systems. Hopefully Apple is doing something about this issue. We are restoring the other phone now. Not a good thing!

  • I just tried to update my iPad 4, and it just shows an iTunes logo and a cord.  I've tried to reset, but it's frozen.

    I just tried to update my iPad to 7.1.1, and an iTunes logo and long white cord shows up.  It's been an hour, and it's as if it is frozen.  I tried to reset, but it keeps coming back to this.  How do I get my iPad back?  This is an iPad four.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • I wanted to restore my iphone 4s from 6.1 to 6.1.1 and itunes showed me (error -1) and i cant do nothing because its stuck with the itunes logo and the cable what should i do to fix it helppp please...

    i just wanted to restore from 6.1 to 6.1.1 on my iphone 4s and itunes gave me an error -1 and know it doesnt work i dont know if the warranty from 1 year of apple can fix it or what i can do to solve the problem... as i said i just wanted to update and know im stuck with the restore logo ( the itunes logo and the cable) need some help please!!!!

    no so i dont know what happened

  • HT4528 My phones shows the itune logo and ubs cord

    I cannot get my phone to turn on. The face shows the iTunes logo and a ubs cord

    It is showing you that you need to connect the iPhone to your computer and restore using iTunes on your computer.

Maybe you are looking for

  • über problems with Z10 for past two weeks.

    Hi there For the past two weeks I've been having major problems with my Z10. I started noticing that my Whatsapp messages were coming through, but not making a sound. I reset and set the notification settings again, but still no luck. I figured since

  • Is it possible to resize the partitions without losing data?

    I have following issue: I have dual-boot Arch with Windows XP. I created 4 partitions: 40GB XP's system disk (ntfs), 80GB ntfs data disk, 1GB swap and 25GB Linux partition. But I am running XP so rarely, that it is frustrating, that I have most of my

  • G/L line item is stored in BSIS but shown in standard trans. as cleared.

    Hello Experts, Why is that there are some G/L line items that my program fetch in BSIS so meaning that it is still open but when we check the standard transaction to list G/L line items it shows as cleared. Hope you can help me guys. Thank you and ta

  • FTP Receiver Adapter parameters

    Hello everyone! I have configured a scenario wherein XI sends a <b>PO.xml</b> file to a folder in an FTP server through the File Adapter (Receiver). Right now, I'm getting an error: <i><b>Error Category: XI_J2EE_ADAPTER_FILE Error Code: PROCESSING_ER

  • Strange rectangle overlapping all objects in Illustrator CS6

    Mac OS 10.6.8 A strange rectangle overlapping all objects in Illustrator CS6 http://s14.directupload.net/file/d/3081/orzhlvx8_jpg.htm does anybody have an idea how to get rid of this? thanks in advance!