My 4th generation iPod nano stopped responding.

It was working fine ealier today, and now it won't respond. It's frozen on the main screen. I've reset it on iTunes, and on the iPod (menu button & center button).

Try the suggestions mentioned in the user manual - iPod Manuals
and iTunes & iPod Hints & Tips

Similar Messages

  • My 4th generation iPod just stopped responding.

    It won't turn on, reset or do anything else at all.
    Please help!

    How did you try to reset it?  What happens when you connect the device to iTunes?
    If nothing else, let the battery fully drain and then charge it backup long enough for you to restore it in iTunes to factory settings.
    B-rock

  • My 4th generation iPod nano was washed, screen is super dim, how can I fix this?

    So a few months ago, I accidentally left my blue 4th generation iPod nano in my pant pocket. My clothes were set to wash with the iPod in my pants. I'd completely forgot about it being in there. After finding out what had happened, I let the iPod soak in a jar of rice for about a month. I took it out to see if anything had worked but it wouldn't turn on.
    Thinking it might need a charge, I plugged it in and found that it turns on only while it's plugged in and instantly turns off when unplugged. I also noticed that the screen is extremely dim, even when put on full brightness. It's as if I turned the brightness all the way down, even though I'm putting it all the way up. I also tried connecting it to iTunes to try to see what I could find. The attempt was unsuccesful as the iPod went unrecognized on iTunes v10.5.
    I'm not sure what else I could do to fix this. Has anything similar to this happened to you before?
    Also, I have a 4th generation iPod touch and iPhone 4. I honestly don't need this iPod at all, but it'd still be nice to get it fixed for extra use.
    Thanks for any help in advance!
    -Tony

    I would recommend taking it in to your local Apple Store to see what the people at the Genius Bar can do for you.

  • Having problems with 4th generation iPod Nano. Desperate.

    I'm having this problem with my 4th generation iPod Nano. Whenever the iPod is connected to iTunes I get message saying "iTunes cannot read the contents of the iPod “IPOD”. Go to the Summary tab in iPod preferences and click Restore to restore this iPod to factory settings." However, I have music on the iPod that is purchased through different accounts on different computers (some of which are no longer existent) meaning I can't afford to restore and lose my music. Is there any way I can recover my music without having to restore the iPod?

    sorry, 5th gen. 30gb w video

  • HT1459 4th Generation iPod: camera stopped working; I touch the icon, the screen goes blank navy blue. What do I do?

    4th Generation iPod: camera stopped working; I touch the icon, the screen goes blank navy blue. What do I do?

    Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • My 4th generation ipod nano is stuck on the apple screen even after i reset it

    My 4th generation ipod nano (the nano chromatic) is stu ck on the apple screen, i tried to restore it by putting it in disk mode like apple support stated but its not showing as connected in iTunes, everytime i reset it, it just shows me the apple logo and nothing else, my warranty has long expired and i need my ipod so please help !

    I assume by a reset you mean holding both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear correct?  Keep in mind this may take a number of tries.
    If that doesn't work, try connecting your iPod touch to your iTunes library in Restore Mode using the instructions from this Apple support document.
    http://support.apple.com/kb/HT1808
    B-rock

  • My 4th generation ipod nano backlight no longer working. Any suggestions

    My 4th or 5th generation ipod nano backlight is no longer working.  Any suggestions?

    Hi grecokev,
    Thank you for contributing to the Apple Support Communities.
    You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
    Turn off your computer and your iOS device or iPod, then turn them on again.
    Check to make sure that you've installed all required updates for your computer.
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    You can find these steps in this troubleshooting article:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
    Best Regards,
    Jeremy

  • 7th generation ipod nano stops tracking my runs after a minute

    7th Generation Ipod Nano: when using the fitness icon and running, it pauses every minute or so and i have to physically hit resume to start again and the mileage is off. Anyone know how to fix? I can't get it to calibrate because it won't make it through a whole work out to do that.

    Is an earphone or Bluetooth headphone connected to the nano?
    If its an earphone you can check the earpod jack on the iPod to see if there is any lint in it.
    If there is no earphone or Bluetooth headphones connected, the iPod thinks play was hit by accident and pauses it to conserve battery.

  • 4th generation ipod nano not working

    All of the sudden my 4th generation, 8GB ipod nano isn't working. I had a 2004 G4 aluminum Powerbook that started to go so I bought a refurbished Macbook Pro a couple weeks ago. On my Powerbook, the screen all of the sudden went dark. I researched what might be the cause and found it to possibly be the inverter board. I bought the part and installed it to no avail. Which probably means it's the mother board... which is why I bought the new Macbook. Before the screen went dark, my left USB port and audio in was having problems (probably the mother board dying). I would always charge my ipod from that left USB port. Could this be why now it's acting up and not even recognizing it on my old Powerbook and new Macbook? When I plug it into either computer, the apple start up screen shows, then it shows the "Low Battery" screen, then it briefly shows my playlist, movies, etc. screen... and then goes back to the apple start up screen, and filters through this process as I keep it plugged in. I'm assuming the worst but hopefully there's a solution and I won't have to now buy a new ipod   Thanks for any help that anyone can provide.

    Anyone ever had this problem before?

  • Does the 7th generation ipod nano have the same storage capacity as the 4th generation ipod nano

    Just bought a ipod nano 7th generation to replace my 16gb 4th generation nano as its battery life is getting shorter
    Went to load my library on to my new ipod and it could not take all the songs, wheras my 4th generarion had room to spare
    so i have had to uncheck a lot of songs to get my new ipod to accept loading
    my guess would be around 300 mb
    Is this difference right when they are both rated as 16gb and showing on itunes at keast the same storage capacity?

    Need to add I have restored the ipod twice with no change to storage capacity
    'others' is showing
    4th gen    119 mb
    7th gen 136 mb

  • I have a 4th generation iPod nano 4th and when I turn it on, the screen won't progress passed the main screen with the Apple logo. What should I do?

    I have a 4th generation 8GB iPod nano and it will not progress past the blank screen with the white apple logo on it. I have charged it fully and tried to restart it by pressing and holding the menu buttons for 3-7 seconds. The devices screen will turn off and then, after a couple of seconds, the screen with the Apple logo will appear again. This screen will remain lit until the iPod runs out of battery again. I have tried plugging it into my Macbook Pro. I have the newest versions of iTunes software and OS X Mavericks. The computer will not recognize the iPod and the device will not show up in the computers list of devices. I looked up the troubleshooting for the device and found out how to put the device into disk mode. I followed the intructions but the iPod would not go into disk mode. The screen still displayed the Apple logo and would not set into disk mode. I fear that I have run out of options. I have come to this forum in hopes that I can still salvage my device. If there is anything I can do, please loet me know so I can try it. If not, I am affraid I will have to go to an Apple store of authorized retailer and have it repaired or replaced.

    Try manually connecting the device to your PC in Disk Mode and then restoring it iTunes.
    From http://support.apple.com/kb/HT1363
    Putting iPod devices with a Click Wheel into Disk Mode
    If necessary, verify that your iPod has a Click Wheel.
    Before placing the iPod into Disk Mode, verify that it is charged.
    Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
    Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
    When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
    Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
    If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
    B-rock

  • HT1351 I have a 4th generation Ipod Nano. I downloaded an MP3 song. It is showing in the folder but not on my playlist. I cannot sinc the song. Also how do I sync a CD to my ipod Nano?

    I have a 4th Generation I Pod Nano. I have downloaded a MP3 song. How do I add this to my playlist and how do I sync the ong to my Ipod?
    Also, how do I sync songs from a CD to my Ipod Nano?
    I have windows 8.
    I have tried everything.
    Please help.

    Welcome to the Apple Support Communities
    Connect the device to the computer and iTunes will ask you to update iOS to the most recent version. Settings > General > Software Update appears on iOS 5 and 6

  • The brightness on my 4th generation ipod nano is broken how can I fix this?

    The brightness on my ipod nano 4th generation is broken. I have it set on high, but it is very faint. Is there a procedure I can do or pay someone else to do to get it fixed?

    I had a simlar issue with my friend's iPod Classic (3rd Gen), what he did was getting it fixed.
    > iFix&Repair
    > Amazon

  • Can i use the same charger for a 4th generation ipod nano with a 5th generation ipod nano

    I am buying a nano 5th generation ipod with no accessories> will my 4th generation charging lead work on it

    Yes.

  • My ipod touch 4th generation ipod camera stopped working how can i fix it?

    My ipod touch 4th generation camera stopped working how can i fix it?

    Basics from the manual are restart, reset, restore.
    Try each of these.

Maybe you are looking for

  • Depreciation for subsequent acquisitions not posted in following month.

    Hello Experts, I had a problem with subsequest acquisition - after posting depreciation was not distributed equally during follwing months. As Paul and Markus advised per note 92260, the period control method should has been set on "06"(start of year

  • Front row on 'power pc'

    ive seen people running front row on the powerbooks and iBooks which "shouldn't" be doing that  Is this possible to do and if so how...

  • Watching movies from seagate

    Hello can someone please help me i was up all night busting my head trying to figure out this problem. I just recently purchased an ipad mini and a seagate wireless for my 2015 vacations. Just trying it out i have LOTS of digital copys with my movies

  • Lockbox with EDI 823

    Here is the process we follow: We get EDi823 from the Bank. we create the I-doc FINSTA01 which creates the data in the Payment advice. The customer pays by 2 fields- Actual Invoice number and reference which is a sales order number. What are the sett

  • File appears to be unsupported or damaged after exporting an image.

    After exporting an Image I wanted to go back into the development module and make another tonal correction. After clicking on develop I received this error "File appears to be unsupported or damaged". What happened? I had just toned and exported it.