My 4th generation iPod touch is suddenly getting very weak at home. I have reset network settings, checked router, everything. All other devices have strong signal. It is also not connecting to any public wifi (Ex: Starbucks). How do I fix this?

I have tried every suggestion posted in questions similar to mine, and nothing is working. In know that it is my iPod and not the Internet itself. Any ideas?

Maybe the antenna connection came lose
Installing iPod Touch 4th Generation Wi-Fi Antenna - iFixit
I would first do what Ingo said and make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar      
Before taking the iPod apart.

Similar Messages

  • I receved a new computer for christmas and my ihone with show up on the new devices on my new itunes but with not connect to the itunes computer music library how do i fix this ?

    I have recived a new computer for christmas and dowloaded the new itunes on it but when i hook my iphone 4 up to the new computer with the new itunes it will only show up on the new devices the music i have on it will not show up in the new itunes lirary on my new computer i hate having to hook my iphone everytime to see my music! can some one show me how to fix this!?!?!?!?! PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!

    Welcome to the Apple Community.
    Which Apple TV do you have.

  • My final cut pro x will not show me any playback video...how can i fix this?

    my canvas area is not showing me any video and is showing a distored section ( see below ) please help!

    It looks like you have the Timeline active, and there is nothing in it, so there is nothing to show in the viewer.
    Try clicking on the clip that is shown on the image at the top left and then move the cursor over it. Make sure that you have skimming turned on (View->Skimming). Does it still not show video in the viewer? Note that part of your clip also appears to be black.
    On a side note: it is super easy to make screenshots right on your mac, so you don't have to point a digital camera at the screen. Just press Cmd-Shift-3 and you'll get a picture of your entire mac's screen (by default it is saved to your Desktop and called something like Screenshot-[date and time here].png
    Or Cmd-Shift-4 and you can drag to select an area of the screen to capture.

  • Some sites recently became blocked on my computer. I either get I'm not connected to the internet or redirected. How do I fix this?

    I went on vacation, when I came back the following websites were blocked. Facebook, Cracked & TMZ. I cannot access them from this computer either with Fixfox or IE. They can be accessed by other computers at this work. Is there a way to unblock them?
    With Facebook, I get the message saying I'm not signed onto the internet. With the other 2, I get redirected to Yahoo.com.
    Anybody have any ideas?
    Thanks

    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Can the 4th generation ipod touch get ios8?

    How can I get IOS8 on my 4th generation Ipod touch?

    IOS 6.1.6 is the end of the line for that model.
    Sorry

  • My changes to a duplicated page are not syncing up in the Creative Cloud. How can I fix this?

    I'm using Adobe Proto on an iPad. I created one page and successfully viewed it in the Creative Cloud. Then I duplicated that 1st page so I could work on the next page in that project. I made some changes to the 2nd page and then synced the project with the Creative Cloud again.
    Once I try to view the 2nd page in the Creative Cloud, it's still an exact copy of the 1st page. In other words, my changes on the 2nd page don't show up. I've tried synching the project many times and I get the same result. Tried opening the project from another browser, same result.
    My changes to a duplicated page are not syncing up in the Creative Cloud. How can I fix this?
    Thank you.

    Yes, I'm 99% certain the project is being synced. If I duplicate more than the one page so that I end up with more than 2 pages, I still see every single page that I duplicated and made changes as the initial version of the page.
    I duplicated that 1st page again so that I have 3 pages. I made changes to the 3rd one and I'm still not seeing those changes when I look at the page in Creative Cloud. I see the new, 3rd page, so that should mean the project is being synced, correct?

  • HT4972 Both my iPod and computer (mac) say that iOS 6.1.5  is the latest software available. I have a 4th generation iPod touch, how do I get it to update to iOS 7?

    Both my iPod and computer (mac) say that iOS 6.1.5  is the latest software available. I have a 4th generation iPod touch, how do I get it to update to iOS 7?

    . As Apple said in June, iOS 7 is not compatible with the 4G iPod.
    All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

  • I am trying to reset my 4th generation ipod touch via itunes (as I cannot remember parental controls code). In itunes it does a download but then says the software was corrupted during download. Itunes is up to date. Operating system is vista. Any ideas?

    I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
    "The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
    I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
    Any advice very much appreciated.
    Thank you
    UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.

    A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to
             update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    Sorry i mistakenly made this question. It was alright. No Problem At ALL

  • I have model a1367, 8gb, 4th generation ipod touch.  how do I update it from ios 4.2.1 to 6 or more?

    i have model a1367, 8gb, 4th generation ipod touch.  how do I update it from ios 4.2.1 to 6 or more?

    Update it from iTunes on a computer as described at the bottom of this article; there isn't a Software Update option in General on iOS versions prior to 5.0. It can only be updated directly to the newest iOS release supported by the device’s hardware, which is iOS 6.1.6 for a fourth generation iPod touch.
    (118217)

  • Home button on 4th generation ipod touch isn't working.  any suggestions???

    Home button on 4th generation ipod touch isn't working.  any suggestions?

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ

  • I bought a refurbished 4th generation ipod touch. How do register it?

    I bought a refurbished 4th generation ipod touch. It's registered as a camera. How do I re register it as an ipod?

    Sounds like you mean that the iPod is not appearing in iTunes on yuor computer. If so then:
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    If necessary:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • HT1459 Whenever I try to activate my 4th generation iPod Touch bought today, via my home router (Asus) which has a good signal, I get the warning: "Your iPod Touch could not be activated because the activation server cannot be reached." Very frustrating.

    Whenever I try to activate my 4th generation iPod Touch bought today, via my home router (Asus) which has a good signal, I get the warning: "Your iPod Touch could not be activated because the activation server cannot be reached." Very frustrating. When I try to activate it via iTunes on my HP laptop, it won't do it either. Very frustrated and unimpressed.

    You are running into the activation lock.
    iCloud: Find My iPhone Activation Lock in iOS 7
    You have to either enter the Apple/iCloud ID and password in order to activate the iPod for use. Or you can try to dissassociate the iPod for that account by:
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    If you can't do that you have a nice, thin but expensive brick

  • How to upgrade to ios5 on 4th generation ipod touch?

    trying desperately to upgrade a 4th gen ipod touch to ios5.  just about ready to throw the darn thing out   i finally resorted to adding iTune to my laptop (which i DID NOT want to do).  Now i have the new iTunes - no longer can see my device and GRRRRRRRRR!  The generic info on Apple site references wirelessly upgrade to ios6 but must have ios5 - grrrrr!!!!!

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem
    Btw you will update to 6.1.3.

  • New macbook pro wont connect to my 4th generation ipod touch.

    I just bought a new macbook pro and when I plugged my 4th generation ipod touch into it the ipod just flashed the battery sign off and on and made the dinging noise continuously and it never connected to my computer.  How can I get it to connect?   I've never had issues with my windows computer.  I tried different a different cord and it didn't work either. 

    I was able to figure it out

Maybe you are looking for

  • Odd urxvt focus behavior

    urxvt has not been focusing the past day or so. when I open it, it comes up unfocused. I havent made any changes to .Xdefaults nor is there any entry other than color-scheme. I have looked in rc.xml (openbox) and pypanelrc and I dont have anything in

  • Why do Track Changes no longer show up when document is saved as .doc?

    I've used iWork for many years to collaborate with people in numerous other organizations who almost all use MS Office and are mostly on Windows. This year, the documents I send them, supposedly saved in Office formats, cause freezes, don't open, and

  • How to eliminate # for empty date value in BEx Analyser

    Hi Gurus, Can any one please let me know how to eliminate # for empty date value in BEx Analyser. Thanks in advance peter

  • Click to open in new tab

    Hi, I normally do google and when I click on a link it opens in the same window instead I want it to open in new tab. Let me know where I can change these settings. And I noticed that the scratch pad "3 fingures and 2 fingures swipes or any swipes" d

  • Continuing problem with alignment

    It is a mystery to me why this problem returned. You can see in the link below that the tops of the Main Content and the Sidebar are not aligned with each other. I had this fixed by adding the overlap:hidden rule to the menubar#1. http://www.openrang