My 4th generation iPod touch no longer gives me notifications for some apps.
My iPod touch won't give me notifications for certain apps. I have the Facebook Messanger app and I don't know when someone sends me a message. It doesn't even show up on my Facebook app. I no longer have that little red dot on the app to let me know I got something on the Messanger or Facebook. Some of my sport apps are slow at notifying me too. Does anyone else have this problem?
go to settings> notifications> the facebook app> and set the notifications to your likings. Good luck!
Similar Messages
-
There are a lot of interesting educatives apps for iPod touch that don' exist for a Mac and I'd like to use them in my Mac. How could I connect the Ipod to a Mac in order to see and use the ipod apps in the Mac?
Mac Operating System Lion
iPod IOS5
Thanks.Are you sure you are following the instructions correctly? Placing the iPod in recovery mode wil allow you to bypass the passcode lock. If it's still asking you for the passcode, you aren't doing something correctly. Keep trying.
If no luck there, try DFU mode as well.
http://www.iclarified.com/entry/index.php?enid=1034
B-rock -
I have a 4th generation Ipod Touch. It has been working for months when yesterday the battery started acting werid. I was driving and it was connected with the usb charger cable to my car stereo when all the sudden my music stopped and the stereo could not recognize my ipod at all. When I got back home, I tried to charge it so it wouldnt die but even while on the charger in the wall the battery continued to die. I charged it over night (the first time I have ever charged it over night) desperately to have battery for a 4 o clock plane flight so I would have entertianment. The ipod died over night while on the charger. When I unplugged it from the usb charging cable I noticed that the icon telling me the ipod needed to be charged came up. So I plugged it back in. The charging thunder bolt symbol popped up next to the very small red strip on the left side of the battery indicating that the ipod had no charge to turn its self on. I tried plugging it in on the computer, the wall ac charger and a stereo system made just for the ipod that also pluggs into the wall. I have used 2 different cables, the result being the same that the ipod held no charge, and it wouldnt charge at all while on the charger, and it would imediately die once i take it off the charger.
I have not idea what has happened ....
Please help
THanks!- While charging try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try restoring the iPod via iTunes. First from backup and if still problem restore to factory defaults/new iPod.
- However, I really think that the iPod has a hardware problem and an appointment at the Genius Bar of an Apple store is in order. If defective Apple should give you a refurbished iPod. -
Will apple give me money for my 4th generation ipod touch?
How much can I earn for my 4th generation iPod touch to get a 5th generation ipod touch?
Through Apple, not more than 10% off the price of a new one. If your old one's in working order, you're probably better off selling it to someone else.
(114507) -
Error message when restoring my 4th generation iPod touch
I own a 4th generation iPod touch. Eventually the device it self became slow. So there fore I tried to restore it. But unfortunately, the process failed. I tried this method several times and It gives an error message every time when start the process. The device is now in recovery mode. The iTunes version I have is 10.0.1.26. The device contain the latest version of iOS 6 update.
The following is the error message:
[ "The iPod "iPod can not restored at this time because the iPod
software update server could not be contacted or is temporareily
unavailable.
Please try again later." ].Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
"The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
Any advice very much appreciated.
Thank you
UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to
update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. My pc didn't create a backup before updating software so I can't revert back to ios 4.3.5 from there, where can I download ios 4.3.5 from?
I tried just about everything and finally brought my Ipod touch to the apple store. The tech installed ios 4.3.5 but still no WIFI. He recommended a $149 exchange - not really a bad deal with a new battery and 90 day warranty, but I thought I'd try again.
The "solution" was bizarre. On YouTube was a fix involving taking the motherboard out and heating the wifi components with a heat gun.
I did not like that idea, but another involved turning it off, putting it in the freezer for five minutes and restarting. It worked! I must admit the fix does not work reliably, so I may still go for the exchange. Still, I am now convinced that it is a hardware problem. i remember back in the old days, TV repairmen sprayed a suspected bad resistor with Freon. The chilled component would work long enough to identify what needed replacement. Perhaps something similar is happening here.
For anyone wanting to try this, I found it more convenient to place the back of my ipod on a frozen cold pack until the wifi is restored. It seems to happen when condensation forms on the face. I used a towel to wipe off the moisture so as not to add to the problem. -
New macbook pro wont connect to my 4th generation ipod touch.
I just bought a new macbook pro and when I plugged my 4th generation ipod touch into it the ipod just flashed the battery sign off and on and made the dinging noise continuously and it never connected to my computer. How can I get it to connect? I've never had issues with my windows computer. I tried different a different cord and it didn't work either.
I was able to figure it out
-
I got two 4th generation ipod touch for my girls. Can I use my Apple ID on there Ipod Touch, or do they each need their own?
You can use the same ID. See the following in order to allow Messages and FaceTime among all users of the same ID
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime -
My 4th generation ipod touch is not being recognized on my computer ?
My 4th generation ipod touch is not being recognized on my computer what do i do ?
iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem -
what is wrong with my headphone jack? i have an ipod touch 4th generation ipod touch every pair of headphones and earbuds i plug in it has the same sound going to both sides.
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
Can a 4th generation ipod touch have a second hard drive?
i have a 4th generation ipod touch and i am wondering if it is possible to have a second hard drive on it?
Nope.
-
My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.
Sorry i mistakenly made this question. It was alright. No Problem At ALL
-
Can a 4th generation iPod Touch be connected to the Pantec Impact via Bluetooth?
Can a 4th generation iPod Touch be connected to the Pantec Impact via Bluetooth? They see each other but when they are told to pair or connect it fails. Both have been tried with headsets and both connect fine. Both have the most recent software updates available.
You mean the PAN profile, which is supported by the iPod touch according to the chart?
But looking into more detail on bluetooth and of what profiles my phone supports it looks like iPod uses PAN, while my phone uses DUN for tethering.
http://www.phonescoop.com/phones/phone.php?p=2260 -
Why can't apple make there mins up and support ios6 siri to 4th generation ipod touch
Really all the tilte says all. Is there any any chance apple will release a siri app for older ipod.
To answer the question in your title;
Why can't apple make there mins up and support ios6 siri to 4th generation ipod touch
They have made up their minds. It isn't available for older iPod Touch models.
Maybe you are looking for
-
Missing right parenthesis error when querying using a list of values
Would anyone know why this statement gives the ORA-00907: missing right parenthesis error..? SELECT FIELD_X FROM TABLE_Y WHERE FIELD_X IN ( 'AJD' 'RED' 'ADF' 'MOI' The reason why I wanted the AJD, RED, ADF, etc values on top of each other is because
-
Is it possible to set a field in another item/list in a workflow?
I've created a list workflow to add a task after a new client is added to my client list. I am trying to create a pre-determined due date, so that the workflow works out the due date so that it's 2 days from today. So I decided to use the 'Add time t
-
I wonder how many Thunderbird users with poor eyesight who are forced to use Nuance Dragon are finding that it is not compatible with the latest version 13 of Dragon (confirmed without offer of help by Nuance). Versions 12 & 12.5 worked perfectly for
-
Kontakt as plug in or standalone In Logic Express?
I run Logic Express in a Mac book with 2,4 Ghz dual core 2 and I have 2 giga ram. I recently got Kontact, how is better to run it as a AU on every instrument track or in a Standalone version routing the outputs to Logic.It seems to me that the CPU wo
-
Hello Dears, I spent that last couple hours trying to make a simple L4 redirect for web session to a server group with no luck. here is my configuration on 7200VXR router. My laptop connected to interface gig0/1 with ip address 192.168.1.1 gw 192.1