My 5 s camera and flashlight have stopped working

My camera app and flashlight quit working. I've rebooted, reset, and everything else recommended and now it just crashes.

Hi there Laura1221,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W.

Similar Messages

My iPhone 5s's camera and flashlight suddenly stopped working.How can i fix this?

I've tried resetting the phone, its settings, turning off the phone, the voiceover thing, and nothing works at all.

Hello there, wicky1096.
The following Knowledge Base article offers up some practical troubleshooting steps to try when an application is not working as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
If the issue persists, you may then want to do the following:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My camera and iBooks have stopped sending emails, the function and ability to create the email is still there but my iPad will no loner send the email or even store a draft on my account to suggest the email was ever written; please help I need thability

My camera and iBooks have stopped sending emails, the function and ability to create the email is still there but my iPad will no loner send the email or even store a draft on my account to suggest the email was ever written; please help I really need this functionality.

Can you send any emails at all indicating that the mail app is working? Did you try any basic stuff yet?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Close those affected apps and restart the iPad. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Camera and flashlight does not work

My camera and flashlight will not work after the ios 7 upgrade. I have rebootd and completely wiped out my iPhone and still no camera or flashlight. I have seen where others are having the same problem but no answers.

I had the same problem it's definitely a software issue because the camera would sometimes work in camera apps but now I could not switch cameras at all.
I may have found a solution of course I probably won't get credit for thanks to Apple.
I believe the problem arises from a bug when the camera is used in lock mode, try restarting your phone with the home and power button. Then open your camera in locked mode and set the flash to auto. Maybe take a few pictures, switch the camera back and fourth, turn HDR on and off, but make sure the flash is set to auto before you unlock the phone. Heck even try playing with the flashlight.
After I did this in locked mode to my surprise my camera and flashlight are now fully functional after I have unlocked it with the password. I'm not to sure what triggered this bug but when I first got iOS 7 and played with my phone some how I unlocked the lock screen without putting in a password. Just by using the camera and the notification and control Center, I unlocked the phone which might of triggered the bug.

FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. Can u please help???

FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

I downloaded a new version of Itunes on my PC now some songs and videos have stopped working as well as ringtones have disappeared.

I downloaded a new version of Itunes on my PC now some songs and videos have stopped working as well as ringtones have disappeared.

I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

Links in PDF's and Excel have stopped working

I'm using a fresh install of Firefox 14.0.1. Links in PDF's and Excel have stopped working (the reinstall was part of the problem solving). FF is my default browser.

Starting in Firefox 14, Firefox no longer creates registry settings for launching links using "DDE". This has been reported to create two different problems:
* "Firefox is already running" or "Firefox is not responding" error when following links in email messages in Thunderbird ([https://support.mozilla.org/en-US/questions/932461 Can't open links in Firefox by clicking URL in Thunderbird])
* New instance of Firefox launches if the existing instance is running in Sandboxie ([https://support.mozilla.org/en-US/questions/933798 Firefox is running. I click on a link, say in an email, it tries to start another instance of the browswer instead of just opening a new tab as it did before.])
Not sure whether your "silent fail" scenario is related.
It is possible to configure Firefox 14 to use DDE by inserting some settings into the registry. I haven't researched this carefully myself, but there was some information about it on and external site linked in the Sandboxie thread.

Lift and Extract have stopped working in Premiere Pro CS6.0.1

Lift and extract have stopped working in a sequence in Premiere Pro 6.0.1. If a create a new sequence it works ok. It seems the sequence has got locked up it some way. Does anyone have any ideas.

Thanks this worked but I found how to make it fail. I created a sequence with 3 stereo tracks and a 5.1 master. I then added a 5.1 audio track and deleted the stereo tracks. From then on the lift and extract fails.
I couldn't find a way to submit a bug to adobe. Please can someone tell mehow to do this.

Filters, styles and effects have stopped working in Photoshop Elements11

Filters, styles and effects have stopped working in Photoshop Elements11, what do I do?

Operating system and version? Have you installed anything new lately in PSE or done any OS updates?

TS1702 Both Pages and Numbers have stopped working. seem fine.

Both Pages and Numbers have stopped working. All my other apps seem fine. I can open the initial screen for both apps with the gray background but nothing else functions. I regularly update and sync the iPad and the linked pc.

Before you take the drastic step of restoring your ipad as gire.prasad suggested, it may be that the apps have not fully downloaded to the iPad. First check that the icons on the springboard don't say either "Downloading" or "Installing". If they do, then tap them again to restart the download.
If that doesn't work, go into the Appstore app and find them in the purchased tab. There may be an indicator that allows you to restart the download process there.

Keyboard and trackpad have stopped working

Hi there
My girlfriend and I have 3 yr old MBP's and her keyboard and trackpad have stopped working. She can plug in an external USB mouse and it moves around, but she can't type her password into the log in. hence she's stuck.
We have tried powering down and up 3 times, even taken out the battery.
Can anyone suggest help?
Thanks Rob

She needs a new top case. On older systems, the keyboard, trackpad, and even power button are all controlled via a single cable. Odds are, if you wait long enough, the power button will stop working too.
I'd estimate the repair cost at probably around $250-$300, so she might just want to be looking for a new laptop. You can also hit ebay and craigslist to see what you can find, just be careful with the screws for the top case. You get the wrong screw in a couple of the holes, they will never come back out until you break something.

USB ports and sound have stopped working

As the subject reads, all 3 of my USB ports have stopped working and all sound. In the device manager I receive a (code 10) for realtek high definition audio. I have done everything I can think of at this point, I have even done a complete OS reinstall. Afterwards I have also updated with every possible driver file I can find from realtek and toshiba, I really don't know what else to do at this point, any thoughts? advice? anybody else with this problem?
Windows 7
Toshiba Satellite
L505D-S5983

Same here. I have an L505D that is doing the same exact thing. No sound device, all USB ports not working and the SD card reader not working either. Also when you close the lid and reopen it, the machine won't wake up. Have to restart to get it to come back. Haven't found ANYTHING in forums to help.
Sound devices, USB ports and SD card doesn't show up in the Device Manager.
Took the laptop to a local fixer-upper. Unhooked the charger, took battery out, put battery back in, then restarted the laptop without being hooked up to the charger and everything came back on. But only for a short while. After a couple of days, it does its thing all over again.
Are we looking at a mother board issue here? SURELY someone out there in cyber space has a solution.

My BBM and Internet and Emails have stopped working.

my BBM and internet have stoped working, when i go onto bbm my recent updates wont update and my messages wont send them come up with the red timer, im also not recieving emails or when i go onto my internet it say no 'network coverage' or 'error' yet my text messages are sending and recieving meanwhile i have full bars of reception, ive tried taking my batter sim and everything out and rebooting my phone but still doesnt work, how can i get it working again?

Hi and Welcome to the Community!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider (virgin) for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issues with Win 7 & CS2. Illustrator and Photoshop have "Stopped Working"

Hi, New to this so I apologize in advance. Bought a new computer in December '09. 6gig quad processor and plenty of 500gigs of disc space. NOt a Memory Issue! Installed CS2 ( 'cause the computer took all of my money!) and all worked fine until 4 days ago. I mainly use illustrator and photoshop. When I tried to save a document... The programs simply "Stopped Working" I'm a rookie with the tech stuff so please speak slowly and simply.... I would appreciate any help as I'm losing money and work right now! Thanks

CS2 is totally unsupported under Win 7. And if you have 6 gigs of RAM I'll guess that it's a 64 bit system which simply adds to the complexity.
Sorry, but the best advice you'll get is to upgrade.
Bob

Merge to HDR and Photomerge have stopped working. Process never starts!

I have a problem with Merge To HDR and also photomerge. The issue appears to have the same cause. Basically what happens is as follows:
1. Open Photoshop
2. Goto File->Automate->Merge To HDR Pro
3. Dialog box appears.
4. I select the files stored on HDD
5. Click OK
And then nothing happens... No screen appears, no progress bar, no dialog box of any kind. Photoshop continues to work fine as if I had just opened it.
The other issue is even more strange.
1. Open Photoshop
2. Open the files that I wish to merge (saved on the HDD)
2. Goto File->Automate->Merge To HDR Pro
3. Dialog box appears.
4. I select the 'Add open files' option
5. Dialog box appears telling me that the files must be saved before they can be merged.
The exact same issues occur with Photomerge as well.
I am using a 15" MacBook Pro (Early 2011) with 4GB RAM, 500GB HDD (100 GB free), 2GHz i7 processor. Currently running OSX Lion 10.7.2. My current Photoshop version is 12.0.4 and I am running it on 64 bit (although have tried in 32bit mode).
This is a link to a screencast I made which documents the issue (with a completely new user): http://youtu.be/6_jltW-f34Q
I have had this issue before but was never really resolved. I contacted adobe and was told to try various things like creating new users, deleting preferences and even uninstalling and reinstalling my entire CS5 package.
The problem resolved when I upgraded my Mac to OSX Lion, although I have no clue why. Now the issue has returned and is extremely frustrating.
Cheers, Jeremy
EDIT: Probaby should've said how do i fix this?

I am having the same problem> My HDR & Photomerge are broken!
Recently the functions for moving multiple images into HDR & Photomerge via Tools and Automate is not working. When I try I get dialog boxs that are incorrect and the software will not allow it.
I've update, removed added items from Photoshop, have plenty of memory devoted to Photoshop, spent hours working with Adobe tech, now waiting for an answer from them takes 72 hours.
Has anyone else experienced this and have you found a solution?
HELP ! PLEASE !

My 5 s camera and flashlight have stopped working

Similar Messages

Maybe you are looking for