My 5180 wont print on board screen says print cartridges refer to documentation

my 5180 won't print,on board screen,icon and says printer cartridges-refer to printer documentation.I did no help.I believe ink levels are good.

Hi alleypoo,
I would like to help you with the ink error you are seeing on the printer screen. Please use the following documents to troubleshoot the issue. 'Ink cartridge is missing, incorrectly installed, or not intended for your device' Message Displays ....
You may also try the follow steps to override the message.
Disconnect any cables (Ethernet cable or USB cable) that connect both the printer and the computer.
Restart your computer. (Consider bookmarking this page in your Web browser so that you can easily return to it after the computer restarts.)
With the printer turned on, remove the power cord from the back of the printer.
Wait 30 seconds.
Insert the power cord back into the printer, and turn the printer on.
Clear any error messages.
Reconnect any cables that connect the printer to the computer.
If the issue persist, call HP. They may be able to offer you a discount on a newer model. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

Hp photosmart wireless e-all-in-one b 110 series printer on main screen says ink system failure

hp photosmart wireless e-all-in-one b 110 series printer on main screen says ink system failure

Hi,
In order to troubleshoot the problem. please follow the steps listed under '0xc19a0013' or no code displays with the 'Ink System Failure' error message below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458034&cc=us&dlc=en&lc=en&product=4022343&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printer not scanning, screen says scan deactivate, how do I fix the problem

Printer copies etc. but for some reason now not scanning, Printer screen says " the computer is not corresponding. Please check the following, then try again.
Printer software is running
Scan from computer is activated via printer software. ( for windows used)
Cannot understand as I've not had any problem before with scanning. Scanned a week or two back and no problems.
the printer screen says scan deactivate???
Can anyone help ?

Hi Sheba12,
I understand you are having an issue with Scanning from the Printer.
You should be able to just unplug the printer from the power source, while it is unplugged,
press the power button three times. Then plug it back in. It should continue from there.
Then, the HP Print and Scan Doctor can help you, just click on the link and download and run.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Please feel free to contact me if you have other questions
Thank you
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My computer is connected to the printer but if I try to print a box appears saying printer not found

When I first installed the software a couple weeks ago I printed a test page just fine as well as one document from the internet. Now after not using my computer for two weeks when I try to print a message appears saying 'the printer is not conected' and 'searching for printer'. I tried reinstalling the software. That all worked until the final screen popped up asking if I wanted to print a test page. I clicked the box that would print the test page but the same box popped up saying that the printer was not connected. However I know that the printer is connected because the software reinstalled. During the two weeks I did not use this computer I was using my old computer, and the printer worked just fine on that computer the entire time; it is only not working now that I have gone back to my new computer. Please can you help me?Thank you.

I too am experiencing an EXTREMELY slow connection to the internet when my PC comes out of sleep. When I check/troubleshoot the connection, I have all green lights, indicating I should be able to get on line, but it takes about 4 or 5 minutes before I can do so. It seems that this problem started shortly after the iCloud (or i Could as another poster said) was loaded. I know its not my ISP, because my wife, who works on an IBM machine gets right on, no problemo. Is there something going on with either the recent update or the i Could (use to be able) addition? Defective software?
TIA for any response.
ME

Canon printer not printing even though query says "printing"

I am having problem setting up my printer (Canon MF4350d) with Mac.
I installed the printer by using the disc provided with the printer. Everything went fine. When I try to "print" I see the printing query, and it even says x% is sent over and such. But… when in fact, nothing is actually being printed out at all.
I looked at the following setting:
Printer & Fax -> Option & Supplies -> under the tab "Driver" I have Generic PCL Laser Printer selected because my printer model is not on the list. I don't know if that might be the reason…
My printer says Canon MF4320-4350
I have Mac OS 10.6 Snow Leopard
I looked up in the other thread (Click here: http://discussions.apple.com/thread.jspa?messageID=12440612#12440612)
I don't see the UFR2 folder under Canon :/
Please help.
Thank you in advance.

Lin365 wrote:
I looked at the following setting:
Printer & Fax -> Option & Supplies -> under the tab "Driver" I have Generic PCL Laser Printer selected because my printer model is not on the list. I don't know if that might be the reason…
This will be the reason. The MF4350 does not support the PCL or Postscript printing languages. You need to use the proprietary Canon UFRII driver. Delete this print queue as it will not work.
I looked up in the other thread (Click here: http://discussions.apple.com/thread.jspa?messageID=12440612#12440612)
I don't see the UFR2 folder under Canon :/
Then this would indicate that you have not installed the Canon UFRII driver. Rather than using the provided disc I suggest you download the UFRII driver from the [Canon web site|http://www.usa.canon.com/cusa/support/consumer/printersmultifunction/imageclass_series/imageclassmf4350d#DriversAndSoftware]. After you download and unpack the file you can run the installer which will create the UFR2 folder under the Canon folder.
Once the UFR2 driver has been installed you can then select to add the printer, this time ensuring the Print Using menu shows the MF4350. Note that when you do select the printer you will get a prompt stating that the driver is not installed. Ignore that and open the Print Using menu and click 'Select printer software'. This will present a list of installed drivers and a search window. Type MF43 and you will see the MF4350 UFRII driver in the list. Select it and OK and then click Add to complete the new print queue creation. Now try printing - this should get a lot further than the previous Generic PCL.

Printing color match screen vs printer

newbie here. im using Aperature and the prints coming out on printer don't match what I see on screen. I'm using MacBook Pro. What is the best way to match these colors? I know there's software you can buy and other stuff, or is there anything incluced in Aperature? Any advise would be greatly appreciated. Thanks!

You may want to search on "color match" as there are several threads on this.
In net, you need an icc profile for your printer and paper combination. You may have been provided one with your printer.
You need to profile your display as viewed in your ambient lighting (this standard is the same standard used by the printer company when they set up their color profiles).
You need to switch off printer color corrections in the printer properties.
And finally, in Aperture, you need to switch on On-Screen Proofing, using the printer/paper icc profile. Adjusting under this profile should result in similar print results (excepting that transmissive light qualities of a display will differ from the reflective qualities of printed work).
G.

Photosmart 6510 Printer error/Blue screen on printer display Code:B864F472

Hello
I'm having a reoccurring problem with my HP Photosmart 6510 all-in-one. The printer will stay on for about five minutes, give or take, and proceed to flash a blue screen (on printer display) with error code B864F472
Next the screen displays a "Printer Error" message followed by "Please turn printer off and then on" with all lights on the printer flashing.
It will display this until I cycle the power and it repeats the same behavior after about five minutes.
I've searched extensively for a solution and have tried multiple things. Such as:
-Unplugging from back of printer and wall, 30 sec wait then plug back in.
-Clean cartridge and print header contacts.
-Set static IP.
-Printed various reports from service mode, No errors, Excellent signal strength.
-Connected to laptop through USB.
-Partial reset, Semi-Full reset.
-Reinstalled drivers on all computers.
-Updated firmware/software on printer itself.
-Ran HP Print and Scan Doctor.
-Reset Router
I'm at a loss now. The unit is just over a year old. I have two laptops and a desktop on the same network. Two computers running Windows 8.1 64-bit and the other Windows 7 64-bit.
Any help will be appreciated. Thanks in advance.
-Lee

I have the same problem. and no solution
All seems to work before the 5 minuts (I can print diagnostic page from the PC), then I think it a microcode problem ...

HP Office jet 6700 ,trying to print and it will say Printer Ready, Empty Print File !

I have a HP Office Jet 6700. I'm trying to print a document , it will say prining Untitled . The printer queue will open up and say printer is ready, empty print file,Idle.
It automatically goes into paused printer. When I try to click on the document itself in the print queue and resume print it gives the same message again.
The Power on the actual printer is flashing slowly as well.
I hae restarted my computer and shut down the printer completey multiple times and it still has not worked. I just printed something on this last night so I'm not sure what the probelm is.
This question was solved.
View Solution.

Hello there! Welcome to the forums @Chinadoll702
I read your post about the printing issues you've been experiencing on your Mac running 10.6 and your Officejet 6700. I have a few ideas in mind to get started and let me know the results and we will take it from there.
Update the Firmware on the printer: Getting the Latest Firmware and Product Updates
Power reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Make a few copies afterwards and tell me if the copies pause, cancel, do not work, etc.
Try printing from Text Edit on your Mac as well, and get back to me with the results.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Pixma MX922 prints a page correctly, then won't print any more...the screen says "Printing..."

As the subject line states - it shows the document is still in the queue. I have it setup on our wireless router to print. I have to unplug the printer in order to reset it - it gives no error message, will not cancel the document, etc. I end up doing this a couple of times per day. Please help! If this is a wifi/WAN network issue, I'll hook up a cord and be done with it - I don't have to use it to print wirelessly, although that is one of the reasons I selected this model was for that capability.
Joel

Hi Dababyguitar!
So that the Community can help you better, we will need to know the computer operating system you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other error messages or details you'd like to give will also help the Community better understand your issue.
Thanks and have a great day!

After printing display window still says "printing..."

using HP7310 office jet all inone
can't print while this message "printing..." is still in display window on printer. Once it goes away after about 5 minutes I can print again.
How do I fix this?
Shane

Stewart,
No, you haven't done anything. That's standard operating procedure for Pages. This issue has come up in this discussion group several times. In fact, I was surprised the first time Pages asked me to save an already saved document. My guess is that the act of printing writes some new info to the file that Pages wants to save. It's a mild annoyance, but still an annoyance.
-Dennis

My 8500a pro won't print even though it says printing. i have to turn it off and then on again.

I have to turn it off and on again to get it to print.

Try upgrading the product firmware following the below steps:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
Apart from that, if you are using Wifi connection, try selecting IPv4 connectivity.
To do that, you can go to the printer ip address from your PC browser (http://xxx.xxx.x.xxx)
Select the Network tab> Network Protocols> Enable IPv4 Only.
Some times, the network environment is contributes to unstability. Above mode at times does help resolve this issue.
I work for HP.

My HP Deskjet 3050A J611 series wont print, says its printing on the screen, but does nothing.

it has nothing to do with the connection, because even if i try to print a test page from the printer itself (not using my laptop) it still wont print. it says "printing" on the screen, but does nothing. and the green light on the power button blinks the whole time... please please help, its super frustrating, ive un-installed, re-installed, plugged it in, un plugged it, plugged the usb cord in before i realized it wasnt a connection problem, taken the ink out.. i dont know what else to do... again, its not a connection problem.. i tried to go into the settings on the printer itself and clicked printer status or something liek that and it attempted to print out a report, but nothing prints... again, the screen says "printing . . . " but nothing happens and it will continue to say "printing . . . " w/ the moving dots for hours... what could this be?? ive searched online and cant find anything that sounds liek this.. seems like everyone has connection probelms... but i need help!

This sounds like it may be a firmware problem. The first thing to do is check to see if there are any available firmware update. I'll include a link to those instructions below. Next, make sure the printer is plugged directly into a wall outlet. Plugging the printer into a surge protector, power strip, or power backup can cause it to become under powered resulting in strange problems like this one. If the firmware is up to date and plugging the printer directly into a wall outlet doesn't help, follow the steps in the document below. If that doesn't help, you will need to replace the printer. Hope this helps.
Getting the Latest Firmware and Product Updates
The HP Printer Won't Turn On or Respond
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Fuji Xerox printer working, then not! print status 'stopped'

I hope someone can help me...
-Had real difficulty getting printer to work. Finally installed drivers from set up disc and all was fine
-2 months working without an issue til today. when trying to print 'stopped' was the status of all jobs
-removed driver, rebooted computer, tried to print, printer was recognized and driver selected automatically, and same thing happened.
-tried forcing the print with ' hold' 'resume' 'pause' and so on to no avail
-removed driver, re-loaded drivers from setup disc and rebooted computer
-tried manually selecting driver from system preferences and printing... same result. I did notice once when I tried hitting 'hold' and then 'resume' that a little message flashed up for a moment next to the picture of the printer under where it says 'Printer Ready' something about opening raster file failed or some such?
I've looked at several postings here and tried many of the suggestions such as disconnecting everything and rebooting etc, but I'm stumped.
Any help would be greatly appreciated.
Many thanks in advance.

Found my own fix for this problem after much web surfing.
If anyone else has the same problem with this printer, this posting is fantastic.
http://www.macriot.com/article.php/20080208052820534
Cheers

My iphone 4s, after i updated my phone from itunes, it had an error, and the screen say connect to itunes, but it wont connect to itunes

Never before have i ever updated my iphone off the computer, there has been issue with backs up. So i went to back up my iphone 4s, it needed to be updated. so i updated it, during the update something had occur and my iphone 4s screen says connect to itunes be it wont connect???? i tried so many things. Ps this is my mom and she needs it
we have itunes off a PC

Hello there, Nunesie.
It sounds like your iPhone is not being recognized in iTunes by your computer. The following Knowledge Base article provides some great, in-depth steps for troubleshooting that issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If after following the above steps, the issue persists, then the following article helps with completing the update/restore:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

My 5180 wont print on board screen says print cartridges refer to documentat​ion

Similar Messages

Maybe you are looking for

My 5180 wont print on board screen says print cartridges refer to documentation