My 5300 doesn't vibrate anymore.

Since today my gsm doesn't vibrate anymore,
I reset all my configurations. But nothing worked. What should I do??

That happened to me before after droppping my phone..When dropping it again by accident it worked again There is a little vibration motor inside the phone which may not be alligned properly.If it is under warranty bring it to nokia centre for repair!! If not -you could try gently tapping /flicking the back of the phone and see if that works

Similar Messages

Why my iphone4 doesn't vibrate anymore when it's in silent mode?

I checked if the vibrate modes were on & they're, and I've been having missed calls due to this issue, how can I fix this??? Thanks

Hi Mike,
Thank you for replying. We have tried it using a different QR code reader and it does the same thing. It's very strange as it doesn't make sense that it would work in Indesign and also if you save it as a jpg it's still readable but as a pdf it doesn't scan. I had previously created the QR code online using a website and placed it into Indesign and that worked when it was saved out as a pdf but it created a white box around it and I prefer just the code with no background. My colleague discovered we can create one in Indesign in whatever colour which is great but am stumped by it not being readable in a pdf. I'm going to try and do the same in Illustrator and see if that works, if not I will send it over to you.
Thank you very much.
Mel

Iphone 5 doesn't vibrate anymore

I've had my i5 for five months now, and about three months ago, it started having an issue with the vibrate when on silent. At first I didn't notice too much as it seemed to only do it randomly, but now my i5 no longer vibrates at all. At first it was just when it was on silent, but now its all the time. I have read some forums about setting a custom vibrate, or doing a hard reset on the phone which I have done but nothing works. What else can I do, other than going and spending two hours at an Apple store? I haven't downloaded the newest update, but I know that has nothing to do with it because I have downloaded other updates and it has not helped so far to date. Anybody who has any suggestions, ideas, or the same problem with a resolution is appreciated!

Thanks Resno, this was it for me. It's confusing that there can be two ways to turn off vibrate while phone is silent; Apple might consider referencing one from the other...
And while I was there I learned about the custom vibrate tone! Shave-and-a-haircut-two-bits for my friends!

My iphone doesn't vibrate anymore.

I have rebooted the phone a bunch of times to see if that was the problem, but nothing. suggestions? thank you

Did you also reset your phone (sleep and home button until the Apple logo comes back again)?
Did you check the Settings/Sound/Vibrate ->ON? Does it vibrate if you switch from ON to OFF and back again?
If this does not help, set it up "as new device again" How to set up your iPhone or iPod touch as a new device

The vibration function doesn't work anymore, why?

My iPhone won't vibrate anymore and I can't figure out why! It just stopped vibrating one day and I can't seem to figure out what went wrong. Anyone have any ideas how I can get it to work again or is it just fried? Do I need to take it in to get serviced or do I just need to get it replaced?
HELP PLEASE!!!

Hey SoCalSkippy,
So when you toggle the ringer/silent switch(shows a red dot when silent) on the left side of the iPhone it does not vibrate?
Try resetting or restoring the iPhone.
http://docs.info.apple.com/article.html?artnum=305743
http://docs.info.apple.com/article.html?artnum=305744
If it still does not vibrate after a restore it may need hardware repair. You can contact AppleCare or Make a reservation to speak with a Mac Genius.
http://www.apple.com/retail/
U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
http://www.apple.com/support/contact/
Jason

Hello i have an iphone 4 ios 6.0.1 and it doesn't vibrate.

i am experiencing the vibration would not work i tried everything, only works on trial when i smack it on my palm.. then it turns right off when the trial is done (ibrate) and if i run the app and tap the app it doesn't work till another slap on the palm.. i cant get to no apple store so im a bit stuck. wont vibrate when i get messages, or anything.

I have the same problem. After updating my iPhone 4S to ios 6.0.1 the vibration doesn't work anymore. Who can help ?

How to deauthorize a computer , that doesn't exist anymore?

I unisnstalled windows , and for some reason when i inserted my ipod to the freshly installed windows+itunes , and logged on my account , iTunes said , that its a new computer and asked me to authorize it , and so i did.
My question is: how can i deauthorize my old version of windows , that doesn't exist anymore?
I also have another question in this topic : When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?

Take a look at this Apple support article; it may help:
One computer using multiple iTunes Store authorizations
When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?
I'm not sure what you mean by this. What "items"? If you are referring to music, videos or movies, you get only one download per purchase, so if you buy the items again, whether from another device or the same one, yes, you will be charged again. Only apps allow redownloading without additional charge.
Regards.

My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc)

My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc) I can't find why.
I trieds to go on Youtube and for that I have sound so it is just for the rings.
Can somebody help me please?
Thank you so much!
Mary

Have you checked your mute switch (right above the volume buttons)? If you see orange, it is muted and will affect the rings, but not the audio on YouTube.
Just toggle the switch so you don't see the orange and check again.

I've put my phone on silent and when it rings it's silent and doesn't vibrate which is what I want, but when I get a text it makes a beep noise but I want this to be silent too. How can I make it silent? Is there a way to do it without using the DND?

I want my phone to be completely silent. If I flick it on to wilent it doesn't vobrate when it rings which is great and it doesn't vibrate when a message comes through. However, it does beep when a text comes through which I don't want, plus I don't know why it beeps as that isn't my normal text tone anyway. But I just want it to be silent. I'm not too keen to use the DND function if I dont have too.

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?

Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?

TarahCurrie Sep 10, 2014 3:48 PM
Restore From Time Machine Backup
Reinstall OS X
Get Help Online
Disk Utility
MacBook Pro, Mac OS X (10.5.8)
You are running 10.5.8
Did you try booting off your Install disk holding the c key down. From here you can get to the drop down menu just a few clicks in (you are not going to install) and run the Disk Utility>Repair Disk. See if it will let you do this.

If i selected to "Create a new backup" and then cancelled that option but want to go back and select "Inherit backup history"; how do i go back and do that since now when i plug in my HD, that option doesn't appear anymore?? Any Help?

If i selected to "Create a new backup" and then canceled that option but want to go back and select "Inherit backup history"; how do I go back and do that since now when I plug in my external hard drive, that option doesn't appear anymore?? Any Help? I bought a MacBook Air, but decided to return it for the newest model, and I wanted to back it up so that I can then back it up on my new MacBook Air. I didn't understand the option to Inherit or start a new back up, and therefore selected the option to create a new backup. I believe I should have selected to Inherit backup history so that when i back it up on the new MackBook Air, it appears the same as the one I'm returning.... Is there anyway that i can re-select the option to Inherit backup history for time machine?

Thanks for sharing this link.
I've posted a question here https://discussions.apple.com/message/22049103#22049103 describing my situation. Are you able to suggest me the right option?

Efi Express doesn't work anymore so I can't print

I Use Efi Express as RIP and colormanagement software to print to my Epson Pro 4900 printer. Now I need prints and this doesn't work anymore.
I installed Maverick so that is most likely to be the problem, because just before I did this the pritner and software worked fine. I installed Efi Express again but I keep getting a message aboutr a system extension that isn't properly installed.
I looked in the system folder for this .kext file, but it doesn't exist at all.
Please help.

We use the Fiery Express driver with our Canon copiers that use the optional EFI print controller and have no issue with this driver on 10.9. In fact, at this point in time, it is the only EFI driver we have for 10.9.
The Express driver plugins should be located in /Library/Printers/efi and the PPD will be in /Library/Printers/PPDs/Contents/Resources/en.lproj and is called Fiery Express. So trash these files and check the EFI web site for the latest version of the driver.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

Su doesn't work anymore but sudo works

Hi all,
I normally use my standard user account but when I'm installing with macports I routinely "su" into root to do things.
Today I went on my machine and noticed that "su" wouldn't work. Before anyone decides to tell me that I don't need to use "su", I realize that but I use it for my own purposes.
From the system log I am seeing this each time "su" fails:
su[1376]: pam_authenticate: Permission denied
What is interesting is that doing a "sudo su" works, and I'm able to do all of my admin duties that way.
I have a feeling something messed up my bash profile but not totally sure. Has anyone else run into this issue?

Hi all,
Thanks for the help on this issue.
I'll clarify: I'm using this install as a server and this is why I have 2 admin accounts on it. The original account is my own; the one I created when I first installed OS X. I then enabled System Admin (root) so that is the other admin account. After installing MacPorts I have been running the system as a multi-user webserver. I occasionally log in as root to do maintenance and upgrades. I have found that it's easier to use the SysAdmin account in certain situations because of permissions issues and ease of installing upgrades.
I'll often log in under my username and then su to root. Recently (yesterday) I noticed that "su" didn't work anymore when I used my normal username.
There are sometimes that I will log onto the machine as System Admin and usually via the terminal (console) I can log in as any of the other accounts by doing
su <username>
this also doesn't work anymore. I get the error:
shell-init: error retrieving current directory: getcwd: cannot access parent directories: Permission denied
I have two servers set up this way. One works the way it should, the other one has this problem. The only difference I can see is in roots bash profile but I'm not sure why they are different on each machine.
Also when logged in as System Admin, I should be able to turn off "allow user to administer computer" on my regular account but it's grayed out. On the other similarly configured machine, under the same conditions, I can. I'm not sure why I can do it on one and not the other.
I've tried turning off enable root via Directory Utility but that didn't fix the issue.

Time Machine Just Doesn't Work Anymore

I was a happy Time Machine (with Time Capsule) user for months. But it just doesn't work anymore. It takes longer than an hour to do every hourly backup so it is backing up 24 hours a day. It finds hundreds of thousands of files changed every hour and tries to back them up. Finders says only tens of files have been modified all of today. I have tried rebuilding my spotlight indexes, repairing my Time Capsule with Disk Utility and starting over with a brand new backup. But it just backs up hundreds of thousands of files every hour. So I am turning off Time capsule since it is clearly broken. If anyone has any suggestions at all I would welcome them.

Marcia,
Consider the following, it might give you some ideas:
Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
One poster observed regarding Photoshop: “If you find yourself working with large files, you may discover that TM is suddenly backing up your scratch disk's temp files. This is useless, find out how to exclude these (I'm not actually sure here). Alternatively, turn off TM whilst you work in Photoshop.” (http://discussions.apple.com/thread.jspa?threadID=1209412)
If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
Installing new software, upgrading existing software, or updating Mac OS X system software can created major changes in the structure of your directories. Time Machine will backup every file that has changed since the installation.
Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
*TechTool Pro Directory Protection*
This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
*Backups WAY Too Large*
If an initial full backup or subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*FileVault / Boot Camp / iDisk Syncing*
Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
Let us know if any of this helps.
Cheers!

My 5300 doesn't vibrate anymore.

Similar Messages

Maybe you are looking for