My 5800 is died after updating the software

Guys,
My 5800 was working smoothly with the older version but now when i updated to the new version my phone is died. It doesn't gives any response. I removed my battery and memory card and switch it on after 5 mnts.But its not giving any response. Do u have any idea on this.

According to this:
http://support.apple.com/kb/HT1937
Softbank does not offer unlocking of iphones.
Your iphone is carrier locked to Softbank and cannot be activated with any other carrier in any other county.

Similar Messages

After updating the software on my ipod touch to OS 6 it no longer works in my car

After updating the software on my ipod touch to OS 6.1.4 it no longer works in my car.

Try:
- Reset the car system
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem,then the iOS update broke compatibility. That happens sometimes.

When I click on the button to download the new IOS software, I get a message saying that all the items on my iTouch will be removed. Will I have to reload everything after updating the software?

When I click on the button to download the new IOS software, I get a message saying that all the items on my iTouch will be removed. Will I have to reload everything after updating the software? Because I had to have my hard drive wiped a while back, I have items on my iTouch that are not in my iTunes. Is there a way to copy everything on the iTouch into iTunes, if necessary, before I load the new software?

It is possible to transfer purchases from your iPod back into iTunes before updating the OS. If you had any CDs from your personal collection, these you have to put back into iTunes manually. Hope this helps you & good luck!

I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts, is it only from my device or the updated software should be adjusted?

I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts anymore(the button edit doesn't exist anymore), is it only from my device or the updated software should be adjusted?

That's exactly right. And since you have a MacBook Air (as I do), that means the synching should occur just fine (if you've set it up right in iTunes). In other words, once you actually do the update, the iTunes on your MacBook Air will re-sync your photos back to your iPhone.
Basically, the process is that your iPhone gets backed up, wiped clean, then the new iOS version gets installed, then the backup gets restored. That will restore everything in the article above, which does not include your photos. But the sync process that happens after the iOS installation would restore your photos from iPhoto given you've set it up that way in iTunes.
When you have your iPhone plugged into iTunes, while looking at the iPhone's summary page, click "Photos" on the right side of iTunes to see how you have your sync set up.
Regardless, it sounds like you'll be fine! Your photos will wind up in iPhoto once you place them there. They will be safe there.

No keypad sound after update the software into 10.3.1.1565

Hi guys..please help me. I'm using Z10, after update the software into 10.3.1.1565, there is no sound of the keypad, eventhough i have made the volume of the keypad sound to the maximum.
Is anyone has any idea or suggestion about it? Thank you.

Lots of users are complaining about issues with Contacts from OS 10.3.1 udpdate (Q10 v5).
I've tried everything under the sun (reinstalled OS multiple times, completely wiped my device, etc) and the problems still persist.
I've noticed that if I repeatedly disable and re-enable Contact syncing via Settings (and then waiting an hour or two), the Contacts will eventually appear after about 5-10 attempts, and my text messages and phone calls will show names again.
BUT, as soon as my Q10 soft resets for any reason (if battery dies, for example), all of my main Contacts completely disappear. Then I have to repeat the steps above every time.
There are a few other things I've noticed:
1) If I click "Edit Contact Folder Settings" button in Account Settings, it shows Contacts, LinkedIn AND "LinkedIn 2". I don't even have LinkedIn installed!
2) If I turn OFF the toggle switch to "Sync All Contact Folders" then click save, it doesn't actually save my settings (usually if something saves successfully, the devices seems to think for a few seconds, which doesn't happen). As soon as I go back to manually edit the Contact folders, the settings are reverted back to All Contacts.
So frustrating..

Ive backed up my phone and restored it after updating the software and now a lot of my apps have waiting next to them and i cant access them from the interface

Ive backed up my phone and restored it after updating the software and now a lot of my apps are greyed out and i cant access them via the phone interface
I can only access them via the App store

I did plug it into itunes and then backed it up to the cloud (im actually wondering if thats my problem)
then restored it from the cloud.
Maybe I should restore it from the computer (when its plugged into itunes?)
thanks sberman

HT1414 i lost my all contact no. after update the software, where can i restore it?

i had lost all my contact info after update the software.
how can i retrieve it?

You should have been syncing your contacts with your computer all along. They should be in your computer in whatever program you have chosen to sync.

My iphone 3g does not work after updating the software through itunes

Some days ago I made a security copy of my iPhone 3G at iTunes. Today when I conected my iPhone to iTunes I had a message saying I had to update the software of my phone. I accepted and after around 30 minutes of update I got another message saying there had been a problem restarting my phone. The screen of my mobile was showing the iTunes icone and the USB icone and I can't access to the content of it. So I disconnected the mobile from iTunes and connected it again and I got another message saying iTunes has detected a mobile phone in recovering process and it says I have to restaure the iPhone to be able to use it in iTunes. And, by the way, before all this when I connected my phone to iTunes the iTunes recognized the name of my mobile. It doesn't anymore, it just says "iPhone" on the left column.
My question is: Should I restaure the iPhone? Will I be able to recover the security copy I made some days ago? Where can I access that copy?
Thank you so much in advance!
B

You're welcome.
Already answered.
When restoring the iPhone with iTunes, the iPhone is completely erased first folllowed by the current iOS version being re-installed. After iOS is reinstalled, you are prompted to restore from your iPhone's backup, which is the default selection. The other available selection is to restore as a new iPhone or not from the backup.

I could not take picture at video mode after updating the software to IOS 7

I have iPad 3 and update the software to IOS 7 recently,after updating of software I could not take picture in videos mode and I could take only photos.please advise how to resolve this issue.

Swipe up or down to select options.
You can do it in the middle of the screen.

Help, my googlemaps can not use the gps any more after updated the software.

hello
i am fresh here
about a month ago i got a 9630 from bell
at first the googlemap works well, but a few days ago i updated the software(9630AMEA_PBr4.7.1_rel77_PL4.1.0.40_A4.7.1.40_Bell_Mobility_Inc)
since then it can't use the gps any more.
it always say "your current location is temporarily unavailable. gps temporarily unaviliable "
thank you very much if any buddy can help me

Go into your OPtions, then advanced options, applications and highlite google maps, menu button, edit permissions. make sure they are set to "allow". this will typically solve it. also go into your GPS settings (under options) and make sure its set to "location On".
Try these and you should be back up and running.

IPhone 4S was working fine until recenty after updating the software to the 5.1 version

My iPhone 4s was working fine until I recently updated the software to version 5.1, now it locks up on nearly any screen and reverts back to the main screen. Even in settings, if I go in a few tabs in settings all of a sudden it takes me back to the main screen. I have done a total reset on the phone and it has not helped.
Also, it is now completely frying the battery goes from 100% to 35% in about 4 hours. I have killed all apps running and it is still hot and using up the battery.

I have done all of the above suggested restart, reset and restores using iTunes and without. No luck.
What I have found is that under Settings; General; About; Diagnostics & Usage; there is an error message populating every single minute that says low memory. It appears that the reset back to the main screen coincides with this error message. I have very little data stored on the phone, 13 Gig available.
How does one go about emptying this memory?

After updating the software Mac won't Start!!! Plz help.

Hi last week I brought MacBook Pro 17" Lion 10.7.3, 2.4 ghz Intel core i7, 4gb Ram.
I updated its software before going for work in countryside. But now when I restart it stops on grey screen with apple logo after the blue screen.
I can mov the cursor but I login window doesn't comes up...
I didn't brought my Back up Drive to boot with....
I went through the discussions on my iphone and have tried doing all this ..
1. Went into safe mode and into disk utility and have verified disk and repaired disk.
Have also done verifying and repairing disk permissions. It goes all good but still when I restart it gets
Stuck on that grey screen with no login space.
2. Have also tried going into single user mode and tried doing those steps about Fsck
But only first time it says file modified and after that I tried it again and everytime it says disk is ok.
And then restarted it but again gets stuck.
3. Have also tried going into terminal in utilities and putting the commands that Kappy has tried to explain to someone through sudo chow.
And restart it but then also gets stuck on grey screen.
4. I tried locating /System/Library for editing the start up items but can't find that.
I will go back to main city in 2 weeks. Till then I can only start in safe mode. Any suggestion plz.

Restart and hold down the command-r keys so the Mac boots to the Lion Recovery disk. Select Disk Utility and then run Repair Disk.

Windows does not recognise my iphone after updating the software to 4.3

Drivers for my iphone does not have Software since i downloaded the 4.3 update, it is telling me to insert a disk and I do not have one.. Please help, I'm desperate. Phone does not restart or turn off, it continuously shows the the message where to connect the usb lead to itunes, but it is not recognised.

Can anyone tell me how to reset the phone, i press the home key and the off switch together, the apple logo comes up, but it still tells me to connect to itunes but there the software is not recognised.

TS4107 I have to use the optical output to my receiver for my surround sound ( it does not decode HDMI). After updating the software on my Apple TV the optical no longer works. The HDMI to my TV works and provides sound to the measly TV speakers. WHY?

I updated my software as "recommended" and my optical output is not working anymore to my receiver and thus no surround sound. My HDMI to the TV still provides the picture and sound to the TV. My receiver only uses optical and was fine BEFORE the software was updated. How can I go back to the prior software or fix this? My Apple TV is the earlier 720P version. I have tried restarting on the Apple TV and then unplugging and reinserting all plugs to no avail. It provides no optical sound on Netflix, Youtube and other selections but does via HDMI only to the tinny TV speakers. ANY IDEAS?

GO to your Dolby Digital settings, and toggle the options.. Auto, On, Off. That worked for me, and a few other people.

HT4623 when i try to update my iphone with itunes finished update and try to activate but i cannot activate my i phone after update the software

when i try to update my iphone via itunes then after update my phone cannot activte how can i activate my iphone ? and what is the wrong with that

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

My 5800 is died after updating the software

Similar Messages

Maybe you are looking for