My 5s gold edition goes off & on

my 5Sgold Edition goes off then on continually for about an hour now. someone can tell me what's going on please

Try resetting the device.
Turn your iOS device off and on (restart) and reset: http://support.apple.com/kb/HT1430
iOS: Back up and restore your iOS device with iCloud or iTunes: http://support.apple.com/kb/HT1766
**Backup your device to iTunes or iCloud before restoring to factory settings!!!

Similar Messages

How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

I have the same problem with my iPhone. I set up a recurring calendar event for every Thursday. That event is no longer happening during the summer, so I went in and chose one from the current month and selected Delete. Then it gve me two choices, one of which was to Delete All Future Events of this one, and that's what I chose. I figured, this way, I'll still be able to see the ones from the past, but won't have to see (or hear the alert) for the future ones.
The following week, my phone alerted me to the appointment, and even showed it on the initial screen, even though it wasn't in the calendar. I went in to the calendar and NOTHING was scheduled for that day. So why is this happening?
So I set up a new recurring event, for in the past, then went in and deleted all furture occurances, and it did the same thing... still alerted to an event that was no longer in the calendar.
I hope somebody else has found a fix, or at least a reason for why this is happening.

Need help creating illusion of a long road going off into the distance...

I can't for the life of me seem to figure something as simple sounding as this out... I've spent 2 whole days now working with every different program in the CS4 Master Collection and am ready to shoot myself.
I'm trying to create a nice banner and in it is a street sign and the road it's naming going off into the distance as if you were standing on the road looking straight down it forever into the vanishing point.
For some stupid reason this is the hardest illusion of all. In PS CS4 I create a really long Road as a Smart object,and then try to turn it into a 3d postcard so I can rotate it, but only the part that is seen within the boundaries of the Banner renders in 3D, the rest of the layer that hangs outside the border is cropped.
I want to be able to put a light on it and texture it to make it look realistic, other wise I would have just drawn a triangle with lines on it. So I try using After effects to at least handle this part. I created a really long (20,000 px) road in Illustrator, ported it into AE, but AE kinda does the same thing, I am only able to see a piece of the road, the ends are invisible, so only the middle, say 5,000 px of the road are rendered when I rotate it into the plane I want!
Is there a tutorial or something that can help me achieve a realistic looking long road?
Thanks All
Aza

My advice is to use good old perspective transform, along with Scale and maybe distort to change the vanishing point. Edit/transform/perspective. These transform parameters are very easy to work with and will create a good visual perspective. Not a good idea to use Warp or Liquify because this will throw your perspective off. Best thing to do is light the image from above before transforming. This is an excellent use for Smart Objects.
Another slightly more complex way is to use the vanishing point filter. Copy your flat road and paste it into a carefully created vanishing point grid.
Getting into the 3D tools for a simple task like this, just creates more things that can go wrong, as you have discovered.

MacBook backlight goes off when lid partially closed

My 2yr old MacBook backlight has started turning off when the screen is partially closed. It works fine if the screen is open beyond a certain angle (about 90 degrees), but turns off when the screen is closed beyond that angle. Comparing to another MacBook (newer system): the backlight stays on until the screen/lid is just about closed.
It's definitely the backlight (the logo goes off as well), not the system suspending.
I'm worried this may be an early sign of a general failure.
It's well out of warranty -- any ideas what part should I look at replacing?

Louie -
I have the mid 2009 MBP - is there a magnet inside the unibody aluminum housing? The lid latch below the track pad is smooth and seems to have some magnetic attraction to the lid itself.
S.U. -
My problem is that the screen does not go off when the lid is closed. The problems described with the SMC reset involve the screen backlight not turning on. It also says to not reset the SMC unnecessarily. WIll that reset affect anything else?
Tried the paper clip - no joy. Will check with a magnet at work.
Is there a time setting for sleep mode on close?
Message was edited by: Thomas Seery

Earlier comments added goes off while saving PDF with new comments

When I add comments to a PDF file which already has some comments, the earlier comments goes off and only the changes I add gets saved in the PDF file. At the same time in some other system the new comments are added correctly to the file (that is, the earlier comments doesn't go off)

"I should perhaps add that I'm working here with .doc files (not .pages files) and that I edited the info.plist of Pages to give it the role of 'editor' instead of 'viewer' for all ".doc" files. Mainly to ensure that if I work on a .doc file which I want to remain a .doc file, I don't have to Save As (.doc copy) all the time but can just save in the normal way. Could this interfere with the above problem?"
Here is your problem. Every time you open a .doc to Pages it is a new document. When you work on in Pages it is a Pages file and not a .doc file. If you want to work in PAges save the file as the generic .pages and do the export for .doc. Keep that name and next time you Save as Word or export as word in the same location the .doc file will be overwritten with the new one. and you'll only have on .doc file and one .pages file.
If you want only have .doc files don't use Pages.

'Get info' does not open after alarm goes off

Using iCal, before an alarm goes off, I'm able to 'get info'/'edit' the event, but after an alarm goes off, I'm unable to edit the event unless I quit and reopen the app. Any ideas why and how to resolve?

I posted this over a week ago. Does anyone have an idea how to rectify this. I can't be the only one having this problem!
(Using iCal, before an alarm goes off, I'm able to 'get info'/'edit' the event, but after an alarm goes off, I'm unable to edit the event unless I quit and reopen the app. Any ideas why and how to resolve?)

TNS Listener goes off frequently

I have installed oracle9i on my laptop having operating system Windows XP Home. I have successfully created database, TNS Listener both. I can start TNS Listener as the windows service. But when i try to connect to database using SQL Plus or any other client, TNS Listner goes off. If I start it again, it will be on until next time i will try to connect to database.
This is a strange behaviour of listner i am seeing first time.
If any of you Database GURUs have any idea, why its happening ?
Appreciate your help.
Regards,
Nilesh

Hi 120116
Oracle9i is not certified for XP Home Edition. I have seen a lot of people with that same problem. Regarding that you can not do anything apart from change your OS to XP Professional.
Joel PÃ©rez
http://www.oracle.com/technology/experts

Alarm incorrectly going off since Daylight Savings Time

My alarm is always set for 6:30AM Monday through Friday.
Since Daylight Savings last week, my phone has consistently gone off at 5:30AM, and the 6:30 alarm doesn't go off. If I set a later alarm, say for 6:31AM (in addition to the 6:30AM alarm), my phone will go off at 5:30, and then 6:31... disregarding the 6:30 alarm.
I have deleted my alarms and then rebooted the phone, and then added the alarms back in. Unfortunately, my phone keeps going off an hour earlier than it should.
Last night I set an alarm for 6:31AM and deleted the 6:30 alarm, and my phone went off at 5:31, disregarding the 6:31 alarm.
Any ideas on how to fix this, or am I doomed to wake up at 5:30 the rest of my life?
Message was edited by: louismartini
Message was edited by: louismartini

Or you could expect a product that you pay for to work as it's supposed to.
I don't disagree with that.
The iPhone, and ALL smart phones are highly complex devices. There are several hundred different programs all interacting with each other, in addition to the phone operating system.
This software is constantly being changed and updated. Certain versions will be stable with certain applications. Updates can cause bugs (like the clock not working).
I am a pilot. I do not use the navigation programs on the iPhone. I use a FAA certified navigation system, because I need something more reliable.

My display goes off when Battery being charged on Acer E5-511 after upgrading to Windows 10

I upgraded my window 8.1 to Window 10 on Acer E5-511 machine yesterday. I notice that when I switch on power to charge its battery, a beep sounds and display goes off. when power is again switched off the display comes back with a beep again. However, when the machine battery is allowed to charge for some time, either it goes to hibernation mode or stops working since display does not come back even after switching off the power supply. This peculiar problem did not existed when I had used this Notebook with windows 8.1 for past eight months. Can any one help me to solve this problem as i am being forced to charge the battery only when Notebook is not powered on.

A BIOS update fixed Grey Bat's (a.k.a. Myotis grisescens) problem. http://community.acer.com/t5/Windows-10/Restart-problems-with-Acer-E5-511-P8C8-laptop/m-p/370322#M24 http://us.acer.com/ac/en/US/content/drivers Edit: Acer also said that "Your system may require additional software, firmware, and/or a BIOS update to install and run Windows 10." http://us.acer.com/ac/en/US/content/windows10-eligible-models

Iphone 4 will not start up...the apple icon comes on and then goes off and then comes on and goes off again continuously....any ideas?

Iphone 4 will not start up....the apple icon comes on and then goes off and then comes on and then goes off continuously....any ideas?

1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
2. If that doesn't solve it, use: http://support.apple.com/kb/HT1808
Using this article will erase everything on the device, so make sure you have a backup!
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
JW
Message was edited by: jesterwylde

Files going off line

I don't seem to have a problem with files going off line after capturing, but when I send a file to motion and send it back to final cut it goes off line. Can someone tell me what causes files to go off line, and what I need to do to correct this? Thanks
Michael

If you are editing the file you send to motion, and saving it, then it is normal for the file to show up as offline. Just right click and relink, if its still in the same place, it should find it in no time.
What files exactly are the ones going offline? .motn?

My cursor keeps going off the page on the left when typing. How do i indent to permanently see the whole writing?

When typing i hit the enter button and the cursor goes off the page on the left and it takes two spaces or letters before wording reappears; of course the first two letters of each word is missing. Only way to read correctly is to put two spaces before each line

Are you zooming the page?
You may have zoomed the page(s) by accident.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Did you make changes to the default font settings?
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Edit > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Edit > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

Nano crashes (reboots) when alarm goes off

When the alarm goes off on my Ipod it just reboots and shows the Apple logo.
I have the language set to Swedish but when I set the language to English the alarm works without any problems, so my guess is that it's something with the firmware.
So here is my questions:
Is anyone experiencing similar problems?
Is it possible to reinstall the latest firmware, just to make sure it's installed correctly?
Can anyone test to set the language to Swedish and see if it happens for you too?
I have a Nano 3g with v.1.1 PC version.
/Andreas
Message was edited by: asjokvis

Ok, then I guess it's a well known bug (at least in Sweden) now when we at least have three iPods with the same problems. So I guess we just have to wait for a firmware that fixes this issue.
I reported it as a bug to Apple (if they care), so let's hope they can fix it until the next update.
Thanks for your answer and if anyone else is having this problem maybe they can let us know in this thread. It would also be interesting if someone that has the language set to Swedish still can use the alarm (reminders) without it crashing.

Phone goes off while Synchronise

I need Help
Recently I have updated my phone software via Nokia Software.
i have two issues
one is the mobile goes off with you Sync. with outlook then on agin without completing the task.
also when trying to send txt MSG selected To: Open Log.
also phone goes off then on
any idea for the issue
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: العربية
Locale: English
Input language: English
Nokia PC Suite:
Version 6.83.14.1
Language: English
Connectivity Cable Drivers:
Version 6.83.9.0
PC Connectivity Solution:
Version 7.7.10.0
Microsoft Outlook:
Version 12.0
Build 1014
No supported Bluetooth stack foundMessage Edited by rabia_saifan on 09-Aug-200707:24 PM

Duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Curve/hi/m-p/2645505#nobanner
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Wireless Printer keeps going off-line

I have an HP Officejet 6700 Premium - Print/Fax/Scan/Copy/Web Printer
Serial No:  [edited Serial Number by Moderator]     - Product No CN583A - FPU No 64001
I have a Network set up - Connected to this Network is: 1. Sony Vaio Laptop - Operating on Windows 7   2. Apple iPad Air 3. Apple iPhone 5 and 4. The Officejet Printer mentioned above
I am using the Mweb Fon Router - Wireless-N VDSL Modem/Router (802.11n)
I also have a ZyXEL Wireless Extender N300 - also supplied by Mweb that extends the signal to the other end of my house.
I have several different things happening as follows:
1, Sometimes the printer goes off-line completely and I have to search for the Router and re-enter the password to get it online again
2. The Printer sometimes says it is on line, but my laptop cannot connect with the printer and I also cannot get a Scan connection either
3. Sometimes when I cannot print from the Laptop which is saying the printer is off-line, if I go through my iPad/iPhone I can print.
4. Sometimes I cannot print from any of my devices as there is no connectivity at all even though the printer says it is connected.
5. I have to continually re-boot my laptop and I can print for a while then, but the connection is lost again after a short while.
I have downloaded your HP Print and Scan Doctor and run the program which does repair it for a while, but it still goes off-line again after a short period of time.
Please can you advise me of a solution to these problems, it is really agravating to keep having to re-boot to get the printer connectivity back, especially if this happens when you are banking online and want to print a proof of payment!!!!
Would my printer be faulty, if so should I send it back under the Guarantee which is still valid until the 5th January 2015
Please advise me of a solution as soon as possible as I am getting very frustrated with this situation.

Hello all, and welcome to the HP Forums.
I understand there are connection issues afoot. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know, and thaks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My 5s gold edition goes off & on

Similar Messages

Maybe you are looking for