My 5th Gen 60gb iPod freezes when watching video, help?

I recently bought my first iPod and have downloaded lots of music and photos. I recently bought the Xilisoft platinum converting programme and converted a couple of films to MPEG 4 and then on to the ipod. Now after sometimes as little as 30 seconds the picture freezes then after 5 seconds, the film continues without sound. I have tried this on all my videos on my ipod and they are all the same. Please can someone help me as it is very frustrating, thanks alot!!!!

You and a million other people. The problem is with firmware 1.1. To solve the problem you need to downgrade to firmware 1.0. You can look through the discussions where it's been covered ad nauseam.
What I did to downgrade mine:
Here's what needs to be done for downgrading to firmware 1.0 without losing any data on your iPod:
-Connect your iPod to your computer, ensure it's updated via iTunes, then disconnect it from the PC and exit iTunes
-If you don’t have the original firmware 1.0, download iPodSetup 2005-11-17 here:
http://appldnld.m7z.net/content.info.apple.com/iPod/ww/win/061-2225.20051128.PDW nw/iPodSetup.exe
- Then download iPodWizard here:
http://sourceforge.net/project/showfiles.php?group_id=153441
(download the “Release”, the top link of the two)
- Uninstall iPod for Windows 2006-1-10 if it was previously installed on your PC and reboot.
- Install iPodSetup 2005-11-17
-Connect your iPod to the PC, make sure iTunes is not running
-Launch iPodWizard.
-In the top left, click "Open Updater"
-Locate the iPod Updater.exe located in a sub-folder where you just installed iPodSetup 2005-11-17
-In the "Firmware:" drop down menu, select "5th Generation iPod (v.13.6.0)"
-Click "Load" just to the right of the drop down menu
-In the iPodWizard Essentials box on the right, it should say "Found 1 iPod drives:"
-Click "Downgrade Firmware". I'ts very quick.
-Click “Downgrade Firmware” once more. It needs to be done twice.
-Close the iPodWizard
-Again, make sure iTunes is not running
-From your Start menu, run iPod Updater 2005-11-17 and click "Update", not "Restore"
-Once the update is completed (it takes a few minutes), exit the iPod Updater and run it again to view the new firmware number. It should read:
"Software Version: 1.0 (up to date)"
-Launch iTunes. A pop up window will ask you if you want to download the new software version 1.1. Tick the box "Do not ask me again" and click "CANCEL"

Similar Messages

  • 5th Gen 60GB ipod turns off randomly

    My iPod has a tendency to just turn off randomly. it'll leave a "ghost" screen shot of what was on it and then it slowly fades away to nothing. Then, the black screen and apple come up and take 20-30 seconds to reboot and start over at the main menu.
    Any idea as to how to fix this?
    thanks

    My 5th Gen 80GB ipod also turns off/restarts randomly after about 2-3 minutes of use. Very annoying and have had much trouble in trying to solve this problem.

  • Ipod freezes when playing video through dock

    Okay, this is a challenging one. I will be surprised if someone can help me figure this one out, but I will be very grateful!!
    Picked up a brand new 60gb 5th generation video ipod the other day. 1.1 update already installed. Everything worked great. Was able to play videos through the AV dock, no problem, and was able to hook it up to the JBL stereo for the ipod, no problem.
    Here is where it gets interesting. I took an avi video from my digital camera, and used Quicktime Pro to convert it into a .mov Apple Quicktime movie. I am using Windows XP. I then imported that .mov movie into itunes. Then I right clicked on the file and told itunes to convert it into the ipod format. I then hooked the ipod up to the computer, and the video was transferred to the ipod with no problems.
    Then I was able to play the video with no problem on the ipod screen (not hooked up to the AV dock). Then I inserted the ipod into the AV dock that is hooked up to my tv. I played videos this way without a problem, before I loaded this new home made video. When I played the new video, I answered Yes to Tv Out, and right after that point my ipod froze up. No video played at all. Then I had to reset my ipod.
    I tried this again several times, with the same result. This was now happening with regular videos that I downloaded from itunes. Also now, when I hooked the ipod up to the JBL stereo, and just tried to play a song, the ipod would freeze up. However, songs and videos play fine when the ipod is not hooked up to a dock.
    It seems to me like my home made video somehow corrupted the software drivers for the port on the ipod.
    Then to fix the problem, I finally had to do the dreaded RESTORE. I could not update the ipod, because I was already at version 1.1. I tried rolling back to an earlier version, but the updater told me that the update was not compatible with my ipod.
    The RESTORE did fix the problem. The ipod was completely back to normal. I could hook it up to the JBL and the AV dock with no problems. Until...yes, I tried playing the home made video again. I just wanted to see if it was a fluke. Same problem came back....arrghhh!
    He is another weird observation. I can start the video playing on the ipod, without it hooked up to the dock, and answer Yes to tv out. The video starts playing, then I can insert the ipod into the dock, while it is still playing, and the video plays fine on the tv, through the dock! Until the video finishes. Once the video finishes, the ipod freezes up again.
    I wonder if this is a hardware problem, and I should just return my ipod. It seems like a software problem to me. I think if it is my home made video that is corrupting my ipod, I think itunes should be smart enough to not copy something to my ipod that is going to corrupt it.
    Ha..ha...wow, sorry that was very long-winded. Anyone have any suggestions?
    Dell Dimension 2.8ghz P4   Windows XP   2.25GB of RAM

    All I can suggest is to re-encode the video as m4v with QT Pro, there might've been a problem in encoding. Also, try sending this same video (setting TV Out to Yes) with the iPod not plugged into the dock and with an Apple RCA cable, if you have one, hooked up to a TV. If that works, the dock connector might be damaged (unlikely) but it's possible. So once you've re-encoded, see if the dock situation works then. Good luck.

  • Safari and (less so) Firefox freeze when watching video

    I'm having crashes, more often in Safari, when I am watching videos from websites. It just happened with Jon Stewart and the Daily Show, so that was annoying. The pinwheel comes on, things freeze, then--poof- and the "do you want to make a report" message comes on. I don't know much about what I am doing, so simple, clear advice would be more helpful.
    Thanks!

    Please post your Etrecheck report here.....
    Download it, run it and post the results.
    ...........http://www.etresoft.com/etrecheck

  • Computer freezes when watching videos (or video calls) since I bought a new router linksys E1200

    Hello!
    Since I've bought a new Cisco router last summer,, a Linksys E1200 (v.1 updated...) (always in the wireless mode), my laptop (Sony, Vaio VGN-NW110D) freezes when I stream videos online or when I use skype video calls. It sometimes freezes for a few minutes (in that case it's just really extremely slow and it sounds like a satanic robot), and then comes back (but does it again a few minutes later. Or sometimes, and this is more frequent with skype video calls, it completely freezes, and I have to reboot the hard way...
    This never happened to me before and I've been watching videos and video skyping for years. I have windows 7, service pack 1 (32 bits) now . I have windows 7 now, since about the same time I bought the router. But what makes me think its related to the router is that when I'm at work, or at my parents, or sisters, or boyfriend's house, this problem does NOT occure.... Do you think you could help me? This is getting really annoying! I would really appreciate it! :-) Thanks a lot! 
    ps-Oh and I don't know if this information could be relevant, but this does not happen when I make videos calls with skype on my iphone

    You can try the following combination of settings:-
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
              1] Open the software and go to the option which says "Router Settings"
              2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
             3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your routers main/ basic setup page). Here is the link for determining and setting up the correct MTU size: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the user name field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

  • 5th gen 60GB iPod memory

    Hi there,
    Not sure if this is a silly question, but I've almost used the entire memory of my trusty 5th generation iPod. The thing is - I've a folder of a few images I'd like to add, and while my iPod says I have 66.2mb left and the folder I want to add is only 3.4mb; it won't add it when I try synching it in iTunes. The message I get is that there isn't enough memory on my iPod.
    I've tried optimising the images further, but still no luck.
    While it isn't worrying me as I plan to buy a new iPod when I get a new laptop, I am wondering why it won't let me use the remaining memory (it just seems like a waste).
    Anyways, if anyone has any suggestions - that would be awesome.
    Thanks!

    Where are you looking at the "Available Memory" for the iPod?
    How are you determining the size of what you are trying to add?
    How are you "Adding Photos"? Manual sync or automatic?

  • 5th gen 60GB iPod takes for ever to bee seen by iTunes and Windows XP

    Can anyone help me??
    let me start by saying that I have tried the 5 R's and still nothing!
    when i conect the ipod I hear the the sound the pc makes when you plug in a divice, but I will not see the ipod in "My Computer". maybe 15 min later itunes comes on and it starts syncing my iPod but then after about 100 songs it stops and says: "the disk can not be syncronized because it can not be read or written to" and the few songs that were synced, do work!! if I try again it will sync another 200 or so songs and stops again with the same message. SOMETIMES when I connect the ipod, iTunes will not see the software version or the serial number and continue to sync anyways.
    after itunes tells me that it can not read or write the iPod it ejects it and it is no longer seen in MY COMPUTER either. PLEASE HELP

    See if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod
    Disk cannot be read from or written to error syncing iPod in iTunes.

  • Ipod Freezez When Playing Videos

    HI
    I have a 5th generation Ipod. everything was fine until one day it started freezing every time i tried to watch a video but i kept trying and then one day it froze and didnt wanna turn back on, I had to restore it like 15 times until it would turn back on again and now it still freezez everytime i wanna watch a video. I tried deleting the videos and putting them back on the ipod but that didnt help. PLEEEEEEEASE someone help me!!!!!!!! i'm going insane!!

    The old iPod updater software is how you will fix all of this. Unfortunately, because iTunes 7 thinks that it's better and more up to date, it will prevent you from opening the old version of the software if you still have it on your machine.
    So first of all, uninstall iTunes 7.0. (You do not have to remove your library information, just the software.) Restart the computer.
    If you still have the old iPod updater, try it and see if it runs. If it does, read on. If not, skip to the next paragraph. So, if it does run, simply hit Restore and you can go back to a previous version of the firmware. I believe that Apple discontinued the firmware page since releasing iTunes 7. Look around some search engines like Google if you really want the latest firmware.
    Take out the installation CD that came with your iPod. Run it and it should install the old iPod updater along with iTunes 6.x. iTunes 6.x cannot run since iTunes 7 changed your libary's formatting, but that will not be a problem. Run the Restore process in the old updater and it should be alright for you to start loading your stuff on again without problems.
    Since iTunes 7 reformatted your libary listing, iTunes 6 will no longer work. However, you can still use it by reinstalling iTunes 7. Just make sure you do the following.
    TO KEEP THE SAME THING FROM HAPPENING AGAIN
    iTunes 7 is actually alright. It's the updater part of it that will screw up your iPod.
    - iTunes 7 will tell you that a new iPod software version is available when you open it.
    - Check the "Never Ask Again" box and click Don't Install.
    - When you sync your iPod to your computer, NEVER touch the Version section when you're changing your iPod's settings. Everything else is alright to work with.
    - Everything will work fine as long as you never update the iPod's software via iTunes, at least until the programmers can fix this issue in a later release or patch.
    kEat0n

  • 5G iPod Freezes When Playing Videos

    Starting about a month ago, my iPod began to freeze randomly in any video I played. The video would slow down to an eventual stop and a static/scratching sound would occur. This usually ended up in restarting my iPod. The video would continue if I fast forwarded to about 3 minutes later in the movie. Eventually the freezing happened again and again in random places. All the music works fine.
    I have formatted and defragmented my iPod many times but to no avail. The same videos still froze but in different places. Is it time for a new iPod or new hard drive? Thanks, Steven.

    Photo viewing and Music playback is fine, only Video playback is the problem.

  • Toshiba satellite C650D freezes and buzzes when watching videos

    Hi my toshiba satellite freezes when watching videos and randomly freezes when loading pages.Sometimes I can unfreeze my computer by holding the power button.but most of the time i have to turn it off.So yeah any help is appericated.

    Satellite C650D-10K (PSC16E-008007EN)
    Downloads here.
    Tell us more about what happens.
    And do your problems occur only while using the browser? If so, which browser? Which version?
    -Jerry

  • Ipod 5th Gen 60Gb keeps resetting and... (please read)

    Hi everyone.
    My ipod 5th gen 60Gb keeps resetting itself when plugged to the wall charger.
    Once it starts again it gives me the sad face and the "Very Low Battery" screen.
    Tried to reset it and i gets to the screen that tells me to connect to itunes for restore.
    When i do that itunes won't see my ipod.
    How can i fix it? How do i get to finally restore my ipod? Is that an hardware problem? I did replace the battery and it finally has power for hours but i still have this tooth to pull out.
    Can anybody help me please with some suggestions/solutions?
    Your help would be really appreciated! Thank you!

    I forgot to say: When i plug it it it gives me the apple for 5 - 6 seconds, the the SAD FACE with the link to the apple support page, then the "Very Low Battery" screen, then it restarts again and it does the same thing over and over again.
    I can put it in disk mode, yes it will charge but if i attempt to plug in to the USB2 port (rear) of my computer with itunes open, it doesn't get recognized.
    The hardware management of windows sees the ipod once i put it in disk mode. Then after 30 secs more or less it restarts and windows tells me the ipod device has problems.
    Help PLEASE!!

  • 5th Gen. Ipod won't restore. ???

    I have a 5th Gen. Ipod. I have plugged it in and I have clicked RESTORE IPOD. It looks like it is doing the job, then......when it is all done...the Ipod says, "Connect to Computer to Restore" (It is already connected). Then the computer still shows the option to restore the Ipod. It will not allow me to do anything else.
    What I have done so far
    push and hold center button and menu button and wait for "apple" to appear.....it does...then shows.."Connect to computer to Restore" ...so then I do the following
    Restore on ITUNES
    Plug it in -charge it completly
    Pray for it
    Stare hard at it
    Still scratching my head.

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Itunes playlists no longer showing up in my 5th Gen 80GB ipod

    Ok, my ipod 5th Gen 80GB ipod works fine, all of my music is in there, and I can successfully sync with the latest version of itunes. The problem is: I can see my playlists in itunes on my laptop, I can sync my ipod successfully, but the playlists do not show up on my ipod. I have already tried resetting my ipod and restarting my computer.
    I'm stumped on this one

    Hello steelydan0613,
    And welcome to Apple Discussions!
    How do you have your iPod set up to sync music? Manually or automatically? If you sync automatically, how do you have your iPod set up to sync music from under its Music tab in iTunes? You may want to double check these settings.
    B-rock

  • HT1449 I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch).  All music is there and playable but will not recognize any devices

    I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch).  All music is there and playable but will not recognize any devices. Help please

    The ipod is not a backup/storage device.
    You need to copy everything from your old computer to your new one.
    The Apple store will do this for you,  you can call apple support and they will help you, you can use google.

  • During sync my ipod freezes when copying angry birds app

    During sync my Ipod freezes when it tyies to update the angry birds app.  I cannot get past it and therefore cant finish the sync.  can anyone help me?

    Dry deleting the app from iTunes and redownload the app and then sync.

Maybe you are looking for

  • How can I move a folder to another catalog using LR 3

    I have imported a large amount of folder into cat#1, but now i have decided to create cat#2. I have tried to move the "folders" and not "catalog" using the following workflow: 1- Opening cat #1, make selection of folder to be moved 2- Go to file and

  • Runtime in Java- Beans

    I have the requirement to write a Java- Bean, which calls a command line Application on the Client. The Problem is: if I call a command- line Application, it seems that Java grabs the Input and Output- streams (I dont see anything in the command line

  • News page without using blog theme

    Hi, I would like to add a news page on my iweb site where i can write small texts. I want to display the title and a few lines with a "read more" feature Using the blog theme is not what I want because I don't want people to have access to the archiv

  • Pasting text into indesign 2014

    I'm trying to copy text from word into indesign 2014 and it isn't working ... I have tried copying the text from illustrator into indesign and it doesn't work???

  • Hrforms doubts

    hi experts , i am designing  payslip in hrforms . how to retrive the Entire records for the personnel number in Hrforms . i am getting the current record only. but i need the all records .