My 6 gen nano just stopped working, but is recognized by iTunes

Although fully charged, my 6th generation nano just stopped working for no apparent reason, but is still recognized by iTunes.  It was purchased only 20 days ago and used 3 times.   What can be done?

Read the PDF manual:  iPod nano (6th generation) - User Guide

Similar Messages

  • My ipod nano just stopped working right after playing a song, any suggestions to get it back working?

    my ipod nano just stopped working right after playing a song, any suggestions to get it back working?

    Did the battery run out of power?  If not, try doing a Reset to "reboot" the iPod
    http://support.apple.com/kb/ht1320
    (A Reset does NOT erase the iPod.)

  • Nano just stopped working???

    My ipod has just stopped working. I was listening to it this morning and there was more than enough charge in it. I go to turn it on now and nothing, checked to make sure it was not locked and still nothing. Connected it up to the computer and it doesn't even see it as and external device - it's just dead. I only purchased this ipod less than 60 days ago. I did have a weird thing happen about 2 weeks ago as well.......the music stopped and all the pictures were scrambled lines all the graphics on the ipod were gone. I did manage to reset and re sync with my computer that time, but I'm thinking maybe I got a lemon? How do I go about getting this issue resolved? Looking forward to anyones suggestions. BTW I did try to take it back to Walmart where I purchased it and they won't take it back after 10 days what a bunch of crap.

    Just got this from some else's question about a dead ipod and this worked...Thanks glad I visited the site.
    You may need to reset it. So first thing to try is...
    Put the hold switch to the OFF/White position. Now toggle it ON/orange then back off again. Then press and hold both the MENU and center buttons on the iPod and hold them for a good 15 seconds or so. Your iPod should reboot starting with the Apple Logo screen.
    If it doesn't work the first time, give it a second or third go. Sometimes it takes a few/several tries.
    See this thread as an example of what I mean by needing to try it many times...
    http://discussions.apple.com/message.jspa?messageID=5065208
    http://www.apple.com/support/ipod/five_rs/
    Patrick

  • HT5521 MY USB cable has a error message UNknow Devise and my IPod Nano has stop working as I was downloading Itunes

    MY USB cable and Ipod Nano has stop working while I was dowloading a CD to  from my computer to Itune.  Error message is a Unknows Devise.  Unable to turn on Ipod nano

    Hello hjoan
    Check out the article below to troubleshoot issues with your iPod showing up on your computer and in iTunes. It will give you multiple options on troubleshooting the issue.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Regards,
    -Norm G.  

  • My rotor just stopped working but has power help

    My wiresless rotor has worked and just stopped. We have tried to reset, unplugged and turned off all computer as we have in the past but it still doesn't respond yet all the normal lights are on

    let me know the router model number , the isp details ( cable or DSL )

  • Help, my iPod Nano just stopped working

    Help I've had my iPod nano 7th generation for about 6 months now.  It's always worked fine until one day after charging it, it will no longer turn on.  It does get hot when I try to charge it or reboot it (reboot using the home and on/off button together).  Can anyone please help?

    Hi AliPe!
    I have a website that I believe will help you troubleshoot this issue. The website is an iPod troubleshooting assistant, and it can be found right here:
    Apple - Support - iPod nano - iTunes Troubleshooting Assistant
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Just follow the troubleshooting steps suggested by that website and you should be on the right track. Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • TS1398 ipod is in the network and then just randomly just stops working but other devices are working

    hi i need help my ipod is being weird and acting up... when i go to use someone's wifi it works for a good while and then it just logges me out of it say that im unaviable to us that network and other devices r working right on the same wifi I need help.....

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My iPhone 5 just stopped working now not visible with iTunes

    I have had the iPhone 5 for a few weeks, tonight I was recieving a call, as I went to answer it the slide bar locked half way accross and the phone locked up. It then turned its self off and now won't start up again, I have connected it to my iMac to see if iTunes can resotre it but iTunes doesnt even recogonise anything is plugged in.
    Whats my best steps from here?
    Things to try...
    Or is it back to the store when they open tomorrow?

    Same thing just happened to me, through no instigation. Ive had my iphone 5 for a couple of weeks, working ok, came to reactivate it from sleep and got no response at all, tried plugging it in and still nothing. Found this thread and the trick worked, I'm grateful to find the post but the occurrence is disconcerting, has anyone had any recurrent problems with this? I bought my phone abroad and am going back to UK soon where I'm worried the warranty won't cover it. Considering going back to the store in case I have further troubles with this handset.
    Thanks to JDM-NZ

  • Just stopped working -- black screen

    My nano just stopped working, I plugged it in to charge for the past four hours and still nothing, what should I do?

    I have the same problem.  Mine is charged but seems frozen....

  • Tx2-1375 pen just stopped working

    Pen worked fine until yesterday. Just stopped working but touchscreen still works. I had an extra pen from another tx2 that i tried but it didn't work either. Any suggestions? Is there and on/off for the pen since everything else seems to work fine? Thanks for any help.

    Hi, I've had a similar problem, and discovered that it is in fact the pen.
    Inside the digitiser pens is an electromagnetic coil, with a soft ferrite core in the middle (I opened mine up when it stopped working). This is what reacts to the electromagnetic field generated by the active digitiser screen.
    If your pen has been dropped, or even just rolled off the table, chances are this soft core is broken. This will prevent the coil from reacting to the magnetic field correctly.
    Short answer - buy a new pen.

  • I Pod Touch Music player stopped working but Sounds and iTunes samples still work?? Help.

    Howdy. My Music player has stopped working, but regular sounds and iTunes samples still work?? Can anyone help.
    Push the orange music button and the player opens, but when I push the play button nothing happens other than the pause icon comes up.
    Both side volume and the onscreen volume read at full.

    -restore ipod to latest ios if problems still happenes then it's a hardware problem nothing like a good old appointment at genuis bar would help.

  • 4th gen. nano's buttons just stopped working

    I have a nearly new 4th generation ipod that just stopped working in certain respect. It charges, its recognized by the computer and syncs just fine.
    The only issue is, my buttons do not work. I keep it in extraordinary shape-and too be honest I'm a little furious that its committing suicide because i treat it so well.
    I've restored, reset and still no solution. Which by the way is a twist in the story- the buttons work in order to reset the ipod but do not work to actually use the **** thing.
    HELP

    my buttons work fine its just when I try to scroll it seems to stick or just not go as fast as it should, im ****** to. i want to know if this is fixable and covered in my warranty, which is about to expire.

  • Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto the shuffle. My laptop crashed whish had all my new music

    Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto th nano. My laptop crashed whitch had all my new music, and im afraid if I sync my Ipod touch to the desktop with all my old songs, ill lose all my newer ones which I dont want to happen because I want them on my nano. Im sorry for the confusing topic im just so lost.

    All you have to do is connect your new iPod to the computer that has the library for your old iPod.
    When iTunes comes up, click on your new iPod under Devices.
    At the top of the Summary Page click Music.
    Click Synch Music.
    Do the same thing for Photos, Apps, Movies and so on...
    Now just synch the iPod.

  • 2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

    2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

    The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
    The TC runs too hot..
    Look on ebay for "Time Capsule power supply"
    You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
    If you can DIY it is really only a few dollars worth of capacitors that go bad.
    See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    For a bunch of alternatives.

  • My 2nd Gen Apple TV seems to have just stopped working with Youtube. Is there a particular reason this has happened ?

    My 2nd Gen Apple TV seems to have just stopped working with Youtube. Is there a particular reason this has happened ?  All of the other services work correctly.

    Apple already have a position on such matters. If you have a problem with one particular service and not others, contact the provider.
    Contact Apple TV content providers - Apple Support
    However, 3 similar reports, do not a problem make. Perhaps there is a problem, perhaps there isn't, but it really doesn't seem to affect many people if there is, believe me when there is a problem it's quite obvious from the additional traffic it causes in these communities. It's also not exactly clear that you are all seeing exactly the same thing.

Maybe you are looking for

  • Can I place a web link into a Learning Interaction widget?

    I like the format, but it resists anything that is not an image, audio or text. I am new to Captivate...I want to put a list of topics together and then have links to other things

  • Aufnahmedatum in Bridge CS5

    ich habe folgendes Problem: In der Kamera SONY kopiere ich die Szenen vom internen Chip auf die eingelegte Speicherkarte. Diese schiebe ich in den Schacht im PC. Im Premiere Pro CS5 wird unter " Matadaten" das Aufnahmedatum angezeigt. Im Bridge CS5 w

  • Can't get CPU bound!

    Has anyone have any suggestions for the following set-up: we have a 4 Processor NT box with 512MB memory, 15GHD. We're running one instance of Weblogic (256 MB allocated) under Sun's 1.3 Hotspot Server edition JVM. The components are all java, ie we'

  • Fan speed increases and windows 7 freeze on my Satellite A200

    I am using Toshiba Satellite A200-24A (PSAE3E) from 3 years now. It came pre-installed with Vista. Last year i switched to Winows 7 Ultimate. Everything was fine. 4 months ago, i switched to Windows 7 Enterprise N. Hated to see no Windows Media Playe

  • RAW compatibility

    Is there any way to know if Aperture is ever going to support RAW files from the Panasonic G1 camera? I've had the camera since last fall. I really wanted to use Aperture as all my previous pics are stored in iPhoto and I wanted some continuity. Adob