My 60GB Ipod used to play videos but no it doesn't??? help!!!!!

Hi, there
my ipod used to play videos, i then didnt play one for a while and it now doesnt play them anymore..... it doesnt seem to update them onto my ipod....thanks

ok now are the videos that are not updating to the ipod the same videos that used to update to it? Or is it new content you have imported to itunes since you last updated the ipod with videos? Also, are these videos itunes purchased or user created content?
See these articles for information on file formats that will play in itunes and import to the ipod (note: itunes plays more file types than the ipod will load, so just because a video will play in itunes does not mean the file type will update to ipod)
Frequently asked questions about viewing and syncing video with iTunes and iPod:
http://docs.info.apple.com/article.html?artnum=302758
Verifying iTunes video conversion and iPod video syncing using sample QuickTime files
http://docs.info.apple.com/article.html?artnum=302892
Can't transfer videos to iPod:
http://docs.info.apple.com/article.html?artnum=301461
Now once you have made sure that your videos are in the correct format and have been converted to play on the ipod, make sure that your ipod preferences are set to automatically update the videos. Or you can try manual mode and drag and drop em onto the ipod.

Similar Messages

My Ipod classic wont play video. Why? Can you help me, please

Hi everyone , my Ipod classic 160 won¨t play video. Can you help me, please?

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(40627)

My new ipod nano plays videos but there is no sound, why?

My new iPod nano that plays videos has no sound going along with them. It's not a problem with the iPod, (I don't think) because the sound won't play on iTunes either, yet my music in playing just fine both on my ipod nano and in itunes. I dragged and dropped the video into itunes then I converted the video then used the convert selection for ipod. Why is there no sound? Is there something I am doing wrong? My 30gb ipod did worked just fine when I did it that way but my new ipod nano won't. Is there something else I have to do before I can watch and listen to videos?
Any help would be greatly appreciated.
Thanks!
Becca

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, iTunes & the iPod (both of which use QuickTime) only show the video and no sound.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

My ipod plays video but with no sounds....

i uploaded some videos to my ipod, and they play fine, but the only thing is that i get no sound coming out of my headphones, its really frustrating....

Welcome to Apple Discussions!
This is because the video you converted was muxed. See this for more info...
http://docs.info.apple.com/article.html?artnum=302588
You would have to use a converter that supports muxed videos such as:
http://www.squared5.com/
btabz

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

I am creating a slideshow with elements using photos and videos but the video sound doesnt play?

Hello jive
I am playing it back in the slideshow editor/setting up part of
programme where you determine photos/video to be included gaps between
slides, music to play etc This goes through each phot and when comes
to a video the background sound doesnt play, I am using windows 7 and
elements 10.
regards gins51

Ive got youtube videos converted to mp3 files on my itunes, they used to play fine but since the recent update they do not play correctly. how can i fix this?

Ive got youtube videos converted to mp3 files on my itunes, they used to play fine but since the recent update they do not play correctly. how can i fix this?

Try running these songs through MP3 Validator to see if there any issues.
If nothing else, convert them to another format such as AAC via iTunes using the instructions in this Apple support document.
iTunes: How to convert a song to a different file format
B-rock

PrObLeM WiTh IpOd pLaYiNg ViDeOs WiTh No SoUnD!! HELP ME!!

i have a ipod nano 8gb 3rd generation i just got a couple of weeks ago. i got it, read the directions, got the latest downloads, loaded itunes, put my music, videos, everything on itunes, and connected my i sync all of my music on mai ipod with no problem. but when i sync my videos onto my ipod....THERE IS NO SOUND!! the videos were previously converted before i synced them on the ipod. PLEASE HELP ME RESOLVE THIS PLEASE!!

QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos in iTunes to iPod format they only show the video and no sound since iTunes (really QuickTime) is not looking for the audio track within the video track and it gets lost.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
but there are other applications besides MPEG Streamclip you can try as well.
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
The Complete Guide to Converting Video to iPod Format (Mac)
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
See other tutorial articles over at iLounge...
http://www.ilounge.com/index.php/articles/tutorials/
Patrick

10.5.2 iTunes on Windows 7 x64 bit laptop - Quick Time will play videos but not iTunes

I'm hoping you can help, I've looked for a solution to this for a while now.
I store my itunes library on an external hard drive. I completed a clean install of x64 bit Windows 7 on my laptop - all went perfectly. Downloaded and installed the 64 bit version of 10.5.2 iTunes and located my library...the music plays fine but no videos. I opened iTunes in safe mode and it said that I needed the up to date version of Quick Time. Downloaded and installed that...no problems. Now my vidoes will play in the Quick Player but still not in iTunes! They apprear in the "Now Playing" pane but the timer doesn't move - even after pressing pause and play. Can anyone help me please? Do I need to open iTunes in 32 bit mode? If so, how do I do that in Windows 7? i can only find solutions for Mac's....
Thanks in advance

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

My ipod won't play video on my tv

my ipod will not play video on my tv. it tell me tv out enabled please connect video accesory. i have an standard red/white/yellow rca plugged into the earphone jack and it is plugged in properly behind the tv.

The 4th gen Nano has no video out through the headset jack the way older iPods did.. You need the cable that plugs into the port where your sync cable plugs in. As far as I know, the cable is only available through Apple but I could be out of date on that.
Best of luck.

Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

Hello:
Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
Good luck,
Hunt

MY I POD PLAYS VIDEOS BUT THERE ISNT ANY SOUND aNY IDEAS ON HOW TO FIX?

HOW DO YOU GET SOUND TO PLAY ON VIDEO CLIPS?

Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
Videora is one, and there are others.
http://www.videora.com/en-us/Converter/
Search the iPod video forum for other recommendations, but beware of spammers trying to sell you their own product.
And may we ask you to turn off your caps lock? It's considered shouting.
Incidentally, the iPod video forum is here.
http://discussions.apple.com/forum.jspa?forumID=808

Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

I tunes won't play a song on my Windows 8 computer. Plays videos but won't play music.

Itunes will not play music on my HP laptop. I have uninstalle and reinstalled but no success. Plays videos but not music.

Almost certainly a damaged track, then.
Delete the current copy of the track from your iTunes library, and reimport a fresh copy from the CD. Does that one play properly?

My ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes?

my ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes if I downloand straight from itunes.com?

Your content is stored locally on your computer, when you update, it will not mess with your content at all.

HT3775 My DVD player is supposed to play avi videos, but it often doesn't telling me that the file format is not recognized. I suspect it's because it's the wrong codec. How can I tell what the codec is before I burn a DVD? And how do I get a workable

My DVD player is supposed to play avi videos, but it often doesn't telling me that the file format is not recognized. I suspect it's because it's the wrong codec. How can I tell what the codec is before I burn a DVD? And how do I get a workable codec? Thanks for uour help!
Ken Selvidge ([email protected])

I am not a computer savy person. I just need to plug in and have the machine do what it should do.
Not a problem, but that indicates you have a lot to learn.
File extensions like mpeg, mp4., avi, wmv, etc. are just wrappers. It is like a box the audio or video content is placed inside. The audio and video content must be encoded with a codec before it is placed in the box. There are thousands of codecs. Not all are installed on your Mac. You must have the same codec installed that encoded the video in order to play it. So, while Quicktime does support mpeg wrapper, it may not have the codecs to decode the internal video.
Some programs have lots of the codecs available to them, like VLC, Niceplayer, MPlayerX, etc.
You can also get "plug-ins" for Quicktime that add codecs to Quicktime, like Perian. Although it is no longer being developed, Perian still works well.
Why is it so difficult? Probably because they are always working on ways to compress the video to get better playback.

My 60GB Ipod used to play videos but no it doesn't??? help!!!!!

Similar Messages

Maybe you are looking for