My 6151 won't start up anymore!!

my 6151 won't start up anymore.. i turned it off once and now it won't start up!! first it asks for my pin code and it goes along smoothly.. then it's on but the keypad's locked so i unlock it and it asks for my security code (since i put it on automatic keyguard with code) then when i enter my code, it freezes and either shuts down, restarts or freezes!!
can anyone please help me with this? i'm really lost on what to do.. please and thank you..

seems software only you need to get the unit updated.take it to nokia care centre
tongue is too confused on what to speak

Similar Messages

Just won't start up anymore.

A Duel 2 GHz G5 won't start up anymore. After and if it restarts, it keeps asking me it can't find Mouse and wants to search for Bluetooth mouse and such. Reset SMU and am in the process of restarting G5 at this moment. Fan is going crazy right now with blue screen just now opening. At least I am getting the blue screen. Before I was finally getting desktop but nothing else but machine wanting to search for Bluetooth mouse and such but never consistent. Sometimes start up would take forever but never finished. Kept asking for Bluetooth mouse. Just crazy. Fan is still going crazy and still blue screen.
Any ideas? Need help now Please!

Had to power button shut down 10 times to finally get tray open and ran DiskWarrior. Only been two weeks since last ran but critical issues repaired. After running DW restart and same thing. Fan running like crazy and won't finish restart. Sounds like problem previous message from Michael Vejar is having.
Will have to force shut down and take in to store for further work.

Help! - my G5 won't start up anymore

When I woke my G5 1.8DP on 10.4.11 (Jan 05) this morning from sleep it froze and the fans went really loud.
I had to restart it with the power button, but it doesn't start up anymore now. The fans go on and turn really loud after about 2 minutes and the screen stays black (in sleep mode - lights pulsing). I can hear some of the usual whirring start-up noise. The light on the front doesn't go on, only when I press the power button to turn it off again it lights up. I did that a few time, disconnected it from the power supply, but no change. No start up sound, but I turned my computer on mute anyway.
When I opened it up I noticed that it was really dusty inside. I cleaned it all up (carefully) but no change.
It won't react to anything, so I can't reset the PRAM, insert the startup disc or do anything else.
No external backup (I know...) I could start from either.
I didn't do anything unusual and it has been working well even after he last update a few weeks ago. Just did lots of different, high memory things with it since last shutting it down.
Any ideas what I can do?
I have deadlines tomorrow and tons of work on at the moment... AAArghhh
Many thanks in advance!

Brought an iMac back home from work so that I can do stuff here as well. And keep checking for any feedback.
Just had a look - my computer was bought in March 2004 - so it's one of the older versions, which are not directly addresses in the topic.
I just tried the previous suggestions again, but no change.
I managed to get the start-up disc in, bit it won't mount from it (it does move the disc around though - can hear it). It seems more and more that, although there is some power, there's no power to the hard drives as nothing comes up at all
Anybody else has another idea?
Battery? Power cable?
Might bring it to the shop tomorrow.

Premiere elements 11 program won't start/open anymore.

I was using at 7am no problem and my computer died (it has done that numerous times before and i've never expeirneced this problem, just died because the power chord is loose) and then i go to finish editing around 4p and now the program won't open. everythingelse (google, files, media, other programs) run and open fine but not premiere. I am not tech savvy and don't really understand what other forums are saying, i'm definitely consumer level. please please help, i don't want to lose my work.
I have windows 7 (I think)
If you need specs i need a walk through how to check. Its a dell computer that can run world of warcraft just fine so i don't think its the driver or graphic card, and again premiere was working just this morning.
Its a dell i've had for 3 years.

brialynnmassie
Typically I start with lots and lots of questions to define the situation.
In view of the circumstances that you describe, I am going to start with a suggestion rather than questions. Then, if the suggestion does not work, then I will send a lot of questions your way.
Delete the Premiere Elements 11 settings file, named Adobe Premiere Elements Prefs. In Windows 7, 8, or 8.1 64 bit, the path to it is:
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
11.0
and in the 11.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 11.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
We will be watching for your results.
Thanks.
ATR

Help. iMac won't start up anymore...

And it's making a weird 3 beep sound. I've checked Apple's web site and according to them it's a memory problem, but I haven't added any since I bought this computer 3 years ago. I tried resetting my PRAM and PMU and still get a 3 beep and no start up.
I'm running Panther, but not sure which version and can't find my start up disk...
Any suggestions??
Thanks.

Thanks guys. I broke down and took it into the shop...it's way past my expertise and since we've moved we have no idea where the disks are.
Hopefully it won't be too expensive...
Lisa.
iMac G4 Flat Panel

HELP!! My 15" Macbook Pro Won't Start Up Anymore!!!

Okay, I'm in a horrible situation here.. My dear Macbook Pro suddenly refuses to startup at the time I need it the most; testweek.
I really need it to work as soon as possible, so if anyone could help me I will be grateful forever.. It would really mean a lot to me!
So here's what happened...
Today when I installed my software updates, I noticed the tiger 10.9-update had a red exclamation sign before it. I didn't pay much atention to it, and decided to shut down my macbook pro as usual. When I tried to turn it back on however, it got stuck in the gray screen with the apple logo and the little loading sign. I've shut it down and started it up a few times since, but the same thing kept on happening.
I've already tried holding a few combinations at startup (commandcontrolshutdown-button, optioncommand+PR) but nothing has changed.
Please help me out if you've had the same problem, or if you have any idea on how to solve it... Anything would be great!

The same thing happend to my macbook pro while installing the updates....the continuous gray screen with the spinning gear. I didn't know what to do, but I did take it to a Genious Bar. This whole thing started with a kernal panic then installing several updates at once including itunes, quicktime, airport updater, and a couple others. The last update on the list was OS X 10.4.9, neglegently installing them all at once. Upon installing the OS X 10.4.9 update I too got the error message with the red exclaimation point. Then when I rebooted.....nothing but the gray screen. The genious told me it was because I installed OS X with all the other updates. I needed to update OS X seperate. He suggested doing an archive and install when I got home, because there was nothing he could do for me at the store. So I did an archive and install with the two system disks that came with the computer. It took me an hour and a half to do but this worked saving all of my files and settings. I inserted the disks during the gray screen and when it accepted them I forced the computer to shut down. Upon reboot, I held down "c" for at least 20 seconds and when I released the install disk started working. There is something going on cause I even tried updating OS X 10.4.9 by itself, and again, bootup failure!!! I did the whole install again, and curently sticking with 10.4.8. I'm going back to the Genius Bar tomorrow to find out what the **** is going on here. Good luck.

MacBook Pro won't start up anymore

Dear Community,
What a day for me, I was about to setup OS Mavericks on two of my Macs, and both are "dead" or in a deep "coma" (Mac mini : https://discussions.apple.com/message/23555153#23555153)
I did exactly the same thing I did on my Mac Mini before installing Mavericks (Onyx cache clean up) and restarted.
After restart, the Mac display was black and that white let below the keyboard was glowing. I don't even know what do for this one as it seems like the Mac is "dead" for some reason...

The same thing happend to my macbook pro while installing the updates....the continuous gray screen with the spinning gear. I didn't know what to do, but I did take it to a Genious Bar. This whole thing started with a kernal panic then installing several updates at once including itunes, quicktime, airport updater, and a couple others. The last update on the list was OS X 10.4.9, neglegently installing them all at once. Upon installing the OS X 10.4.9 update I too got the error message with the red exclaimation point. Then when I rebooted.....nothing but the gray screen. The genious told me it was because I installed OS X with all the other updates. I needed to update OS X seperate. He suggested doing an archive and install when I got home, because there was nothing he could do for me at the store. So I did an archive and install with the two system disks that came with the computer. It took me an hour and a half to do but this worked saving all of my files and settings. I inserted the disks during the gray screen and when it accepted them I forced the computer to shut down. Upon reboot, I held down "c" for at least 20 seconds and when I released the install disk started working. There is something going on cause I even tried updating OS X 10.4.9 by itself, and again, bootup failure!!! I did the whole install again, and curently sticking with 10.4.8. I'm going back to the Genius Bar tomorrow to find out what the **** is going on here. Good luck.

InDesign won't start up anymore

I have the Adobe Creative Suite CS6 Design Standard, on a PC with Windows 7. The Suite was working great until the other day, when I couldn't get InDesign to start up. I get the error message: "The application was unable to start correctly (0xc0000006). Click OK to close the application." Both Illustrator and Photoshop still work fine.
I tried uninstalling the latest Windows updates, since they were installed about the time InDesign quit working, but I still have the same problem.
If anyone could help me, I would appreciate it!

How do you feel about opening the case and fiddling? Do not attempt this at home unless you are comfortable and understand the risk involved.
How much RAM? How many sticks? If you have at least two sticks, you should be able to pull one, or a pair if you have four leaving memory in Bank 1 (make sure you are static-safe -- a ground strap is the recommended method, but if the machine is plugged in and turned off you can touch the case to discharge before you pull the RAM -- and handle the memory carefully only be the edges). Restart the machine and test If it doesn't boot, odds are the remaining memory is in the wrong bank). If you get the same error, swap the memory you left in with what you took out and try again. If it's bad memory, this should let the program start.
I'd also recommend you run a CheckDisk cycle on the hard drive.

Hp pavilion dv5000 won't start up anymore

My notebook pavilion dv5000 with windows xp is not starting up. The battery has been dead for a while now but itwalkways worked fine with the power plug in. After a while, the computer would unexpectantly shut down after a few minutes. Now, I can not get the computer to completely turn on. I am prompted with the black screen informing me that "windows has not started successfully due to a recent software or hardware change.". It gives me the options to start with safe mode or windows normally. I have tried every option multiple times. The closest I can get is choosing to start windows normally. Theblack windows xp screen loads and then the computer dies again andTatars the entire process again. What can I do?

Try using this document to perform a hard reset on the notebook: http://goo.gl/C9BLD
If that does not work for you, just let me know and i'll see what else I can find for you.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My MacBook shut down and won't start up anymore

My MacBook unexpectedly shut down after I plugged my iPhone in laptop to charge. It happened when it had around 80percent battery but my charger for laptop was still in charging my laptop. I have not spilled any water on the laptop as I keep if in save dry places at all times. I feel pretty let down as I've just came out of they year warranty as I purchased this Christmas 2012. I am hoping someone in here can helps out and show any expert advice from reliable sources

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Invalid B tree node size- Computer won't start up anymore

Get the kernel panic/restart messsage - when I restart same thing.... Tried all of the solutions Apple suggest- re-setting PRAM, holding the "X" key, holding the "option" key... nothing seems to work. Ran the OSX install CD and went to utilites, tried to repair the disk that way- but get the message- " Invalid B Tree node size, volume check failed. Error: The underlying task reported failure on exit. IHFS Volume checked - Volume could not be repaired beause of an error.
CD would also not let me re- install OS X
Currently using OS X 10.4.9 on a G4 iMac

Owen:
Thank you for posting back with an update of your situation. I am glad you were able to work your way through your issues and secure your Users Folder. Data Resuce II is a great tool.
I have been using different versions of TechTool Pro since OS 9 and have found it to be a great tool. It has saved me from disaster several times. I use TechTool Pro 4.5.2 on Tiger. I am not sure what version you were using, but if, indeed, TTP damaged your data, and I have serious doubts about that, it could be that you were using the wrong version.
Having a good backup strategy is very important. You will find some good hints in Dr. Smoke's FAQ Backup and Recovery. My main difference with Dr. Smoke is the he insists on using Retrospect as his backup software, whereas I have never been able to get it to work. Besides, you will find that SuperDuper is much friendlier and efficient. Indeed, SuperDuper was rated the best backup software in tests. And no need to wait for Leopard to do scheduled backups. SuperDuper will do that, too.
Again, I am glad your issue has been resolved. Use Disk Warrior regularly to rebuild your directories and follow a regular maintenance schedule such as the one Gulliver suggests in his article Mac OS X System Maintenance.
Happy Mac Computing.
cornelius
Message was edited by: cornelius

Power Mac G5 won't start up and is beeping

Dear friends,
This morning, my Power Mac G5 started to beep. When I try to restart it, it beeps some more and also makes a clicking sound like a metronome.
The computer won't start up anymore. At startup, it displays a grey screen with a little folder in the center that flashes a question mark and a finder icon.
What is wrong with my excellent computer, and how do I fix it?
Marnie

Marnie Glickman-
Could be a variety of things, but most likely your hard drive is not happy. The flashing question mark means that the system is trying to find a working disk with a valid system on it. Should be the hard drive. Isn't.
Launch from the install DVD of the latest OSX system you have. Under the Apple Menu should be the Disk Utility. Launch it and try repairing your hard drive and see if that does the trick.
If not we dig deeper into this excellent problem.
Luck-
-DaddyPaycheck

IPad 3 won't start up (broken screen aswell) and when restoring/updating gives errors 3194 or 4005

Like the title says, I have an iPad 3 from a friend which has a broken screen and won't start up anymore. He is not sure whether it's just the screen or
something else aswell. So I'm able to get it recognized by itunes if I put it in recovery/dfu mode. Then I try restoring it but I get the error 4005 most of the time.
It has nothing to do with the solutions given when I search for error 4005 on google (like hosts file and stuff) because I can easily update my iPhone and my sisters' iPhone. With a program called TinyUmbrella I'm able to get it recognized in iTunes WITHOUT the ipad being in recovery mode, because the program has an option to kick it back out of recovery mode. Then I'm able to access the pictures and delete apps all that stuff in itunes/windows, but I still do not get anything on the screen. So then I tried updating to ios 7 because the iPad was still on ios 6.1.3 but then I get error 3194 which is kinda the same as 4005. Also tried restoring but that gave the same error.
So now i'm unsure whether the iPad would work if I replace the screen, because it seems to function properly when I can kick it out of recovery with TinyUmbrella. But then I thought, even if I did replace the screen, I still wouldn't be able to update the OS or restore? I don't want to waste my money replacing the screen if it won't even work afterwards..
Yes I tried different usb ports, yes I tried different cables, yes I tried the hosts file thing, I don't have an antivirus installed (only 'antivirus' I have is malware bytes, windows firewall is off, tried on a different computer, tried on a mac, ... I don't think this is the reason because my iPhone updates perfectly.
I did notice though that when restoring when the iPad is in recovery that it would say "waiting for ipad" but then my windows pc says "usb device not recognized" , maybe this has something to do with it?
Solutions please?
Thanks in advance

A PRRAM reset did the trick.
http://docs.info.apple.com/article.html?artnum=2238
This Mac mini is a refurbished one, so probably had some old settings from being connected to something different before.
The TV now is recognized properly as 'Philips FTV'.
Marc

Macbook Pro won't start-up (black screen)

Hello,
I'm having some problems with starting my Macbook Pro
specs of my macbook pro are here: http://support.apple.com/kb/SP13 (15,4 inch 2,2 ghz)
My macbook pro won't start up anymore, i press the start-up button, it makes the 'krie'-sound then the vans start spinning slowly and then he get's quiet. (screen stays black and the light at the mousepad is on).
I tried:
-Connect it to power and wait 15 min. then try again -> same result
- hardware test (installation disc 1 and then press d) -> screen stays black but the disc starts spinning
- pram-reset, -> same result
the only thing i didn't do is check if my ram-sticks are still in position (i never bought new ram, but maybe it started to get loose)
what to do?
Message was edited by: Klapschaats

Just google Nvidia 8600m, and problem, or oh god my screen is dead, and see what comes up.
Once again, if you have a Macbook Pro from mid-late 2007, chances are you have a bad chip. They will replace your logic board, with another bad chip, which may or may not go bad. It's an obvious issue, Nvidia admits they have a problem, and Apple is just going to quietly resolve individual problems.
If your computer turns on but the screen doesn't, it's about 99% likely it's the GPU. Go ahead and let Apple replace it. Oh, and if you have a MBP from that time period and don't have apple care. GET IT NOW. You will most likely have a Black Screen Of Death at some point, and Apple care is cheaper than the repair (which may or may not work). Some people have gone though three logic boards. Good luck.
<Edited by Moderator>

MacBook won't start up (mainboard)

Hi to everybody!
My MacBook won't start up anymore.
I know since several week that the mainboard has problems: when I pressed on the bottem around the battery, it restarted randomly.
I didn't send it in yet because I needed it and could live with this flaw.
But now it doesn't start again. I just hear one single click from the disc-drive and then nothing happens. I'd just need to reboot it ONCE to backuo my data before sending it in.
Do you have any ideas how I could make it work?
Thanks,
Bensch

You will need another mac to do this, but if you follow this article it will show you how to mount your drive as an external harddrive on another computer.
Or else you could just remove your harddrive.
but give this a try first.
http://docs.info.apple.com/article.html?artnum=58583

My 6151 won't start up anymore!!

Similar Messages

Maybe you are looking for