My 6233nokia camera and vedio is not working,pls i...

Mail

what is the problem do you get any messages on screen
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Camera and flashlight does not work

    My camera and flashlight will not work after the ios 7 upgrade. I have rebootd and completely wiped out my iPhone and still no camera or flashlight. I have seen where others are having the same problem but no answers.

    I had the same problem it's definitely a software issue because the camera would sometimes work in camera apps but now I could not switch cameras at all.
    I may have found a solution of course I probably won't get credit for thanks to Apple.
    I believe the problem arises from a bug when the camera is used in lock mode, try restarting your phone with the home and power button. Then open your camera in locked mode and set the flash to auto. Maybe take a few pictures, switch the camera back and fourth, turn HDR on and off, but make sure the flash is set to auto before you unlock the phone. Heck even try playing with the flashlight.
    After I did this in locked mode to my surprise my camera and flashlight are now fully functional after I have unlocked it with the password. I'm not to sure what triggered this bug but when I first got iOS 7 and played with my phone some how I unlocked the lock screen without putting in a password. Just by using the camera and the notification and control Center, I unlocked the phone which might of triggered the bug.

  • Camera and led light not working after IOS 7 update on iphone 5 help please!!

    After I installed the update my led light won't work for the flashlight and my camera doesn't work either. Only the front facing camera works. Any suggestions?

    thanks for the suggestions, i tried the ideas you suggested but i dont even get a camera showing for the rear camera, i also noticed the torchlight no longer works.  i did all the steps but no luck.
    So I took my camera to the genius bar this weekend as well as walking through various steps with the apple guys in ohio support over the net. 
    With the guys at the genius bar, after i insisted that it must be software as the rear camera stopped working only after the softwre update, they continued to assure me it was hardware and talked me into letting them replace the camera,  they then took it to the back and tried fixing a camera and 30 minutes later came out and said the rear camera is no longer being detected and wanted me to replace the motherboard for yet more money.  im glad they didnt charge me for the new camera though as it still didnt work.
    anyway the motherboard idea i rejected as it was just 2 months out of warranty and had only stopped working the day after the release of 7.0.2, so im going to wait until the next few releases to see what happens, as i dont believe for a second its hardware.  i expected a stock answer from apple and its exactly what i got even after my explanation of how it was working the day before the release.  not overly impressed with the whole process.
    i wanted to back down to 7.0.1 to confirm the camera still works but they said no chance so i cant even see if it still works ouside 7.0.2.  anyway will update if i get any further progress.

  • IPhone 4 camera and photo application not working!!

    My iphone 4 camera and photo applications do not work anymore. When I tried to take a picture, the camera froze. I turned off my phone and when i turned it back on, the app will load, but when i tap to take the picture it returns to the home screen. The picture library application does the same thing. I try to load my picture library and when I tap to open it, it returns to the home screen.
    I have tried turning it off and on multiple times and also turned it off for an extended period of time and it still doesn't work. Any suggestions on what the problem could be or possible ways to fix this would be greatly appreciated.

    Tap Settings App>General>Reset, near bottom of list>Reset All Settings. If this does not help you could try a Restore with iTunes, and when asked at end Set Up as New. If this does not help and you have Warranty or AppleCare Coverage take iPhone to Apple for resolution.

  • Camera and photo import not working after update

    after updating to 4.2.1, the camera and photo roll no longer works. Do not update. What a pain!

    Welcome to the discussions,
    did you try the basic troubleshooting?
    -Reset the phone by holding the sleep and home button until the Apple logo comes back
    -Delete the photo cache: http://support.apple.com/kb/TS1314

  • My camera and facetime are not working

    The icons for my camera and facetime disappeared. When checking the internet for help, some said to go into "Settings" then " Restrictions" and then enable the camera and facetime. I see these 2 items and they show that they are turned off. But when I try to turn them on nothing happens. I tried other switches such as Safari and it turns on and off. Can anyone provide some help? Thanks Randy

    Hey Nouman Al Bakri,
    Thanks for the question. I understand that you are experiencing issues with FaceTime and Messages on your MacBook Pro. The following resources may provide a solution:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/TS4185
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    If the above does not resolve your issue, can you describe what exactly is not working with these applications?
    Thanks,
    Matt M.

  • HPDV6 6c04sa - HP truevision HD camea and usb ports not working

    My camera is not working - there appear to be no drivers for it through the website for re-installing, and none in HP recovery and the copies of the original drivers loaded on the computer.  Cyerlink you cam does not install a driver.
    How am I expected to be able to re-instal a driver when there is not driver for it?
    Secondly, there is no information on the camera provided in the laptop.
    USB ports on the left hand side are not working.
    Finally - there is a mysterious Q drive which also appears not to function.
    Running Windows 7 64 bit.

    bump
    Is the HP TrueVision HD internal webcam usb based?

  • After the update camera and lock button not working

    After the last update my camera just a black screen and my lock button which is on the top not working properly I cant close my Iphone.

    Apple will not repair this iPhone, you will get a perfect replacement iPhone 4S exactly like yours, except it will function perfectly.

  • Back camera and power buton not working

    hello dear ,
                  i have problem in my i phone 4,s camera and power buton . how can i replace it

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If this does not resolve the issues, take the device to Apple for evaluation and possible replacement.

  • Thinkpad L412 Integrated Camera and USB Controller Not working

    My Integrated Camera has disappeared from the device manager listing, and "USB not connected". Further, the USB Controller has an "Unknown Device" with no driver. None of my USB ports work beyond power. I cannot find any drivers or other way to resolve. Any suggestions? 
    Thanks in advance for assistance!!!

    Grab the latest chipset driver package from Intel's download center, and run the setup EXE with the -overall switch.
    https://www.raymond.cc/blog/the-proper-way-to-fully-install-intel-chipset-driver/
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • CAMERA and PHOTO LIBRARY NOT WORKING ON 3GS

    Camera option frozen wont let me take pictures. Also when viewing library it wont playback video or show full rez pics. *** apple ?

    I'm having a similar problem. I can usually get one shot off but after that the autofocus works fine. I can push the home button to quit but nothing else works. No shutter, camera roll button, or switch to video.
    If I press home and then back into the cam it works again for 1 or 2 shots but thats it.

  • Camera and Photo app not working?

    I am having an issue with these two apps on my 16gb iphone 3g. Every other apps works normally but these two refuse to open even after a reset, anything known causing this or am i going to have to go through a restore. also going to Wallpaper from the settings button crashes as well. AND the camera works from other apps.
    Message was edited by: shaanx
    Message was edited by: shaanx

    Hello suna.saa,
    Resetting your Mac's  SMC and PRAM may help get stabilize your camera.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Reset your computer’s PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    Allen

  • IPhone 5 rear camera and flashlight is not working, tried to reset everything but nothing happened also tried to turn it off and on but nothing happened. Please help

    Any other suggestions before I go to an Apple store

    Yep, Firefox see's that website as being a forgery. Chrome and Firefox use the same database for phishing and web forgeries - they jointly developed that system.

  • Camera Raw 5.1 downloaded and unzipped but not working in CS4. Can't open Nikon D90 NEF files.

    Camera Raw 5.1 downloaded and unzipped but not working in CS4. OS Windows 7. Can't open Nikon NEF files. Camera Nikon D90.

    update the adobe program that needs cr 4.6+,  http://www.adobe.com/downloads/updates/

  • HT2731 I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. My email is

    I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. You have myy email as correct. I have check my account and it show as being correct.

    It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
    This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
    Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

Maybe you are looking for

  • Tax code Error in PO

    Hi Friends, I have one issue. When I am trying to create a Purchase order, I am getting below error Taxcode X0 is not maintained for Juridiction code XXXXXXXXXX. Could anybody please help me? Thanks, Bhairav

  • XFL wont open in Flash

    I am hoping someone can help me with this problem opening XFL documents in Flash. I have exported an XFL document from After Effects which all works fine. When I open this XFL file in Flash however I get an error message: "An error occured when openi

  • Equium P200-1ED - can't find Video Controller VGA Compatible

    Hello I cant find Video Controller VGA Compatible In the main support centre i couldnt find this driver. Can some1 send me link or something. Thank you Equium P200-1ED

  • Possible fix for car unit Bluetooth connectivity problems (it fixed mine)

    Ok, I understand this only fixed my particular problem, so it may not work with every Bluetooth head unit. I have a Pioneer deh-p7000bt and it worked beautifully with my iPhone 3GS. Once I got my iPhone 4 I restored it from a backup of my 3GS. I had

  • Sync halts after certain number

    My 160G ipod today would sync fine, but after a certain number of entries, would stop. The screen on iPod changes from circling sync to steady 'Connected: Eject before disconnecting'. Does not go anywhere. I have already tried the following: 1) the 5