My 6th gen doesnt play music HELP ?
so i bought a nano (6th gen) a month ago. i havent droped it or anything its bein on my wrist pretty much everyday & i use it on the daily. but it wont play music anymore, wich upsets me because i JUST got it last month its only bein like 3 weeks & im already having problems? when i press play it wont start. i go to the last screen were you control what part of the song you want to here & i move it to the middle & it goes back to 0:00 & then the song switches while i do that PLEASE help .
i updated my itunes & made shure the program was up to date as well
Does the music play in iTunes on the computer?
Try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Similar Messages
-
my buttons arent working and my screen is just black and its playing music, help me!!
Hello yung_jvyden,
So your iPhone is on or it wouldn't be playing music yet you can't seem to "wake it up" as the buttons aren't responding.
There's a section in this article for buttons not responding.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If your device doesn't respond when you press buttons
Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
Restart your device.
If it still doesn't respond, or if it doesn't turn back on, reset your device.
Note it links to
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Thank you for using Apple Support Communities.
Nubz -
I connected my ipod nano 6th gen using the VW aux cable in my 2007 rabbit. The connect came through, but only through the left front speaker. Please help!
Oh, Bluetooth also daoesn't work anymore!
Thanks for this great update, that causes problems where everything worked fine before! -
Please help....my nano doesnt play music...
When i choose a song that I want to play, it doesnt play it. INstead, it skips to the song after it and then the song after that and then the song after that and so on. But the songs never play. It just skips and skips. What do I do? I need help...
emachines Windows XPTry the 5 R's one by one, especially Reset and Restore, see if they help. These are the main starting points for most problems and tend to solve a good few too lol
http://www.apple.com/support/ipod/five_rs/ -
my 6th generation nano plays the same song over and over even though the repeat is not on.
It sounds like the repeat setting has been enabled. See page 21 of your iPod's User Guide for instructions on turning it off.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock -
IPod Shuffle 4th gen cannot play music and no lights but shows up in PC
I've been using the iPod Shuffle 4th gen for almost 3 months since I bought it at September 2010. Since yesterday, my iPod hasn't been playing musics or showing up any lights, same thing when plugged to computer and it didn't showed up in iTunes neither. Today, finally the light lit up when I plugged it into my computer and showed up in iTunes too. But, unfortunately, I still can't play any music. The light goes off every time I remove my iPod from the computer and it is not responsive to any clicks whatsoever. I've tried restoring the device and syncing all the songs back in, it didn't worked either.
SOME HELP PLEASE? thanksI am having the same problem with mine.
When connected to the PC it seems to be ok. All the light signs are working (sync, battery, etc.). I can access it by iTunes, add or delete music, etc.
But when I unplugg from the PC it will not respond to anything.
I have tried the hard reset and to restore it...no change at all.
Anyone can help!? -
Cable in my car doesn't charge and play the 6th gen, only plays?
So I had the 3rd gen iPod and the cable in my car played and charged it at the same time..the cable came with the vehicle.
I decided to get the 6th gen iPod nano and now the same cable only plays it. I had to buy another cable to charge (and of course can't listen to music while it charges).
The car is a 2009 Infiniti FX 35..I've called Infiniti to ask if they have a newer cable compatible with newer devices and they don't...Apple says to ask Infiniti..
I'm just trying to avoid so many cables in the car...I hate wires...the older model seemed to have worked just fine but I just had to upgrade to a nano...and now the older has been stolen... :-\
So is it Apple that needs to sell newer cables for the new devices or is it Infiniti?? Any suggestions? Thanks.First of all to check if your battery is actually charged you can go to System Profiler (use spotlight search if you don't know how get to it) then select "Power" on the Hardware list and you should see more info on the battery. You should see this:
I highlited the info you must look for, this would be what a healthy battery on a less than 1 year old system looks like (Macbook Air 2009 model bought mid 2010)
Battery Information:
Model Information:
Serial Number: W0020X87T6EW
Manufacturer: SMP
Device name: bq20z951
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 002a
Hardware Revision: 0001
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 5366
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 5427
Health Information:
Cycle count: 44
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 8344
Try doing a SMC reset, sometimes it solves these kind of problems. Here is a link explaining how:
http://support.apple.com/kb/ht3964 -
IPod Shuffle 4th gen wont play music
hi, i have a 4th gen ipod shuffle, it syncs and conects to my laptop and it is fully charged, however it wont play music? can someone help me? i have restored it and added new music and it still wont play. voice over is not working either. thanks
The 4th gen iPod has a Hold feature.
http://support.apple.com/kb/TA22774
Try pressing and holding down the Play/Pause (center) button for about 3 seconds. -
6 Gen Nano Plays Music With Static.
My 6th gen. nano is playing music with static. I have tried replacing apple earbuds, restoring the nano, and modifying the volume limit and sound checking. No history of water damage or trauma to the unit. Any suggestions?
I assume you've listened to the same songs using iTunes, and there is no static there... If you've tried different headphones and a Restore (using iTunes) already, there is probably something wrong with the nano.
Hopefully, it is still within one year from purchase date, and you can contact Apple (or make a reservation at an Apple Store Genius Bar), to see about getting it replaced under warranty. Even if it's out of warranty, if there is a nearby Apple Store, you may want to have Apple tech support at the Genius Bar take a look at it. -
Cannot get rid of popping clicking noise when playing music ,HELP! PLEASE
hi, for perhaps the past few monthes, itunes has been creating loud and obnoxious popping and clicking noises every few seconds while playing music on EVERY song. i know its itunes because i have played songs on other media players and they work fine.ive tried the the QT 7 version of the waveout trick. ive tried uninstalling and reinstalling it numerous times, and trying older versions, however i can't go that far back in versions due to my somewhat new ipod holding me back (which btw, music works fine on that).If it were up to me id go and use a whole other media player but a good amount of my music has been bought or ripped in itunes codec. im out of luck and frankly its driving me crazy, please help.
Project settings -> Metronome -> Turn off 'click while recording' at the bottom of that page
-
My ipod 2nd generation wont play music. itunes shows the music on there and will sync fine.
light was blinking orange and then went to green. i have restored it to factory settings. updated the software on it and so far still no music playing from it. i have used a set of apple headphones as well as a bullet speaker. Any advice?? should i just visit the apple storeHow is your iPod configured to sync music from your iTunes library? In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
B-rock -
The windows media doesnt play music
THE WINDOWS MEDIA DOESNT PLAY MUSIC
See:
[[Using the Windows Media Player plugin with Firefox]]
http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin -
since upgrading to ios5 on my iphone4 does not play music (ipod) from my playlists allthough songs are installed, and some of the applications are crashing
Okay, mine now works here is what I did.
plug in the iPhone, iPad etc
in iTunes select the phone or iPad
Under Summary uncheck "Sync with this....."
Under "Music" uncheck the "Sync Music"
Let it remove all the songs, dont worry it will come back no problems.
Once that is all done all the music on the phone or ipad should be gone.
Now check them both back on and everything should copy back onto it.
Working now !!!!! -
Ipod 4th or 5th gen only plays music out loud even with headphones in
So recently my Ipod decided that it only wanted to play music as if there weren't any headphones in it even though i had headphones plugged in. Any ideas or suggestions would be awesome.
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar -
Ipod doesnt play music when connected to usb port
ipod nano wont play music through the usb port. My Iphone and another nano works on the same port. Cabe is good.
The song is displayed and I can switch to other songs but no output.http://discussions.apple.com/thread.jspa?threadID=1111943&tstart=0
Maybe you are looking for
-
Disk Utility - Can't repair Disk - Help needed :(
Hi, I have some trouble to use Disk Utility (on my iBook G4 - 1.33 Ghz+1 GB RAM) I run Disk Utility to verify and repair permissions, which worked, and then Verify Disk. HEre is the logged result: ++++++++++++++++++++++++++++++++++++++++++++++++++++
-
Hi All, I have Customer PUrchase Order Type(ZSDBSARK) in ZSALSCNT Master data,i have added ZSALSCNT to cube then to Multi Provider,on report the Customer Purchase Order Type data not showing. I have checked in R/3. This is the Data Source for ZSALSCN
-
Hi, All I want to do is pass numerical data into a variable, and then access it later. Specifically, I use the Read Vector Space Position VI to find the X and Y positions of my motors. When I press a button, I want the X and Y position at that mome
-
Webcenter Application Roles not getting imported in UCM on Migration
Hi All, I migrated the webcenter resources (Service Data, Customizations and security policies) and UCM content (Using configuration utility, Archiver and Folder Archive components). After migration I am able to see the application roles in the desti
-
Hi I am trying to create a new DC in NWDS but I keep on getting this message: Invalid project description. What can be done to fix this error? regards yuval