My 7100 is telling me it doesn't support a aac fil...

I don't get it. Looking at all available info, my 7100 should support aac files. It appears all my ringtones are aac fies. Even sound recordings I have made are aac files. But I downloaded a song in aac format from Vodafone and when I tried to open it, my phone is telling it doesn't support this file format. What the deuce??? Please help.

Thanks people. It's been a week and no responses.

Similar Messages

I have new Sony A77 M2 camera and adobe Lightroom doesn't support its RAW files. Can you help? I have LR 5.4

I have new Sony A77 M2 camera and adobe Lightroom doesn't support its RAW files. Can you help? I have LR 5.4

You will likely get better program help in a program forum Photoshop Lightroom
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I want to print file labels but the avery ap doesn't support their own file labels. Any other way to print file labels from ipad?

I want to print file labels but the avery ap doesn't support file labels, is there ant way to print file label from an ipad?

You cannot save to Dropbox from Pages natively, but there is a workaround that allows you to use the Copy to WebDAV to get things to Dropbox:
http://techinch.com/2011/02/02/integrate-dropbox-with-pages-keynote-and-numbers- on-ipad/
As to the "Send to iTunes" command "not playing ball", if you'll post specifics, perhaps someone can help you sort that out. It should be pretty straightforward.
Regards.

Help! Itunes telling me firmware doesn't support apps

We have two itouch 2nd gens. One of them, which I have done a restore on for the firmware, will not sync apps. I get an error message from itunes telling me I don't have firmware that supports those apps although I have all these apps on the other 2nd gen we have. What should I do?

Many apps have been update and the update apps are not compatible with the 2G iPod. I would do that by deleting the apps from your iTunes library and then transfer them from the other iPod to iTunes. See:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
Delete all apps that are on your iPod from your iPod and then transfer then from the iPod to the computer by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer

Bought the DLSR Sony a33, but now Aperture 3 doesn't support my RAW-Files.

Does anyone know how long Apple wait to support new RAW-Files?
Thanks,
Kirkemen

The Sony SLT - A33? That should be supported by Aperture 3.
http://www.apple.com/aperture/specs/raw.html
Oh wait, I see. Is that a just released camera?

I bought a Nikon D610 and just tried to upload a RAW file to photoshop CS5 and was not able to. It said CS5 doesn't support the new file and to update it. I downloaded camera raw 6 4 1 update and it still doesn't work. Am I missing a step?

I

Unfortunately, Photoshop CS5 is not going to be able to open your D610 files directly.
The camera is newer than the latest update for your version of the software. Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS5 is no longer receiving Camera Raw updates.
To double check this yourself, using Adobe documentation:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Since your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can then open.
Photoshop Help | Digital Negative (DNG)
The DNG converter does work, but if you want maximum quality from your new camera's raw files (not to mention the convenience and ease of use of directly opening your raw files) you may want to consider upgrading to the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

Media Manager doesn't support Chinese character file name?

I've tried to add files to the library, but non of the files named with Chinese characters were able to add. It give me an error.

That's interesting - we'll have to check on that for you.

Why aperture doesn't support Fujifilm S100 FS Raf?

Dear Sir
despite of the fact that has passed five years since when the above camera has been released, your program Apple Aperture (now on 3.4 version) doesn't support his RAF file format. Why? Instead I've noticed that you have given support for the RAF of other fujifilm camera.
I hope that you'll integrate the support as soon as possible.
Thanking you in advance,
Giuliano Zanzi

Guiliano,
this is a user-to-user forum.
And it is not guaranteed that Apple will hear you here,
You'd better use the feedback form to send your feature request directly to the Apple developer team: Apple - Aperture - Feedback
Regards
Léonie

N900 Media player & KMPlayer doesn't support AVI V...

Hi everybody, my N900 media player & KMPlayer wasn't able to play AVI video files recorded on my Samsung DC, unfortunately I don't know what is the codec of the AVI file as there are so many different one.
Where to download a video player that supports most AVI CODEC? Another question is my N900 doesn't support all MPEG4 files either, please advise me on these matters, regards.

intsall mplayer from teh devels, and set it as a main player for kmplayer, than try .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

MAC OSX 10.4.11 I finally succumbed to the constant irritating messages telling me that I didn't have the latest version. My old version and all my bookmarks have been deleted my Mac says it doesn't support Firefox! How can I recuperate my old settings?

MAC OSX 10.4.11 I succumbed to the constant messages telling me that I didn't have the latest version, despite being happy with the one I had. My old version and all my bookmarks have been deleted and now my Mac says it doesn't support Firefox!!!!! How can I recuperate my old settings? in English

Firefox 4 versions and later '''do not run on a PowerPC Mac''' (like yours) and require '''at least OS X 10.5 and an Intel Mac'''.
The latest supported version for your os is '''3.6.27''' , you can download it from:
http://www.mozilla.org/en-US/firefox/all-older.html
1. Download a 3.6.27 copy of the Firefox from the above link
2. Trash the current Firefox application to do a clean (re-)install.
3. Install the new version that you have downloaded(3.6.27)
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so probably you won't lose your bookmarks or other personal data, if you don't already ''totally'' uninstall firefox(user data and settings like bookmarks, extensions, etc. located here: ~Library/Application Support/Firefox so you must uninstall it separately, to totally uninstall firefox).
see also : [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Running OS X 10.9 but when trying to list an item to sell on ebay it say=Sorry. Your browser doesn't support the popular listing options selling form. If you'd like to try it, please try using Internet Explorer 6 or higher, or Firefox 1.5 or higher. Help

I am running OS X 10.9
but when trying to list an item to sell on ebay it say= Sorry. Your browser doesn't support the popular listing options selling form. If you'd like to try it, please try using Internet Explorer 6 or higher, or Firefox 1.5 or higher.
Help please so I can continue my sad life

Tried to see if it is looking for flash and it is disabled or not installed by default; java (not being installed and best to turn it off normally), browser agent to report it as something else.
Opera comes the closest I've read to spoofing a site telling it is IE but you have to do so per site. Also OmniWeb.

Mount_hfs doesn't support the "async" or "noasync" options

Leopard's mount_hfs doesn't support the "async" or "noasync" options, instead responding "mount_hfs: -o async: option not supported" when using either option.
When booted from Leopard, running the "mount_hfs" from my Tiger boot disk works properly, by executing "/Volumes/Boot/sbin/mount_hfs -o async /dev/disk3s2 /Volumes/Backup".
Since there's no mention of such a deprecation of options in the mount_hfs manual, I'm not sure if this is an engineered change below the hood or a mistake.
Message was edited by: Matthew Earlywine

Tried to see if it is looking for flash and it is disabled or not installed by default; java (not being installed and best to turn it off normally), browser agent to report it as something else.
Opera comes the closest I've read to spoofing a site telling it is IE but you have to do so per site. Also OmniWeb.

My new iMac doesn't support Photoshop as it is a power pc application. How can I install it ?

My new iMac doesn't support Photoshop as it iis telling me that it is a power pc application, which is no longer supported ....
How can I install it ?
Or does this mean I have to splash out on a new copy ... and all the expense that that entails ...

Which version of Photoshop are you trying to install?
Which operating system are you trying to install it on?
In short, if you're trying to install an older PowerPC version of Photoshop onto an Intel-based Mac then you're out of luck.
You could look into purchasing Photoshop Elements 11.

Error in allInOne.js: Object doesn't support this property or method

We are having an issue deploy our website (Developed in .Net) on a specific server. When we try to visualize a report on any browser we get this error:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30618; OfficeLiveConnector.1.4; OfficeLivePatch.0.0)
Timestamp: Wed, 7 Apr 2010 17:52:31 UTC
Message: Object doesn't support this property or method
Line: 10
Char: 281690
Code: 0
URI: http://{IP ADDRESS}/WebUserInterface/aspnet_client/system_web/2_0_50727/crystalreportviewers12/allInOne.js
We have install the Crystal reports 2008 runtime and the Crystal report 2008 sp2.5 runtime. Both of them give me the same results.
It's killing me because i have installed the same solution on many other server without any issue.
Ben
P.s. The Web server is a Window Server 2003 R2 standard edition

Perhaps using [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] will at least tell us what dlls are loading. Look at the CR dlls. There should not be any v11 files loaded by your app.
You may also start considering obtaining phone support for this one. I have a feeling this will take more than just forums to solve...
Phone support can be obtained here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

Iwlist scanning gives: Interface doesn't support sc [solved]

When I'm trying to scan for all available networks I get:
# iwlist eth1 scanning
eth1 Interface doesn't support scanning : Operation not supported
My wireless card works fine if I set every parameter manually. I'm currently using the orinoco drivers that came along with ArchLinux.
It seems like that the version of the orinoco drivers installed doesn't support the scan stuff. But building the new orinoco drivers failed with
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_suspend':
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:330: error: too many a rguments to function `pci_save_state'
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_resume':
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:347: error: too many a rguments to function `pci_restore_state'
make[2]: *** [/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.o] Error 1
make[1]: *** [_module_/usr/local/download/orinoco/orinoco-0.15rc2] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.11.3-ARCH'
make: *** [modules] Error 2
So I did try the wlan-ng26 driver downloaded and installed with pacman.
I remove the orinoco modules with
[root@ArchThinkpad orjanp]# modprobe -r orinoco_pci
But when I try to insert the prism2_pci module, it doesn't exist. Why?
[root@ArchThinkpad orjanp]# modprobe prism2_pci
FATAL: Module prism2_pci not found.
Any heads up on what to do?
This is iwconfig before removing the orinoco modules.
[root@ArchThinkpad orjanp]# iwconfig
lo no wireless extensions.
sit0 no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11-DS ESSID:"" Nickname:"Prism I"
Mode:Managed Access Point: 00:00:00:00:00:00 Bit Rate:11 Mb/s
Tx-Power=15 dBm Sensitivity:1/3
Retry min limit:8 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/92 Signal level=-68 dBm Noise level=-122 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
This is lspci
[root@ArchThinkpad orjanp]# lspci
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
02:02.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
This is lsmod before removing orinoco.
[root@ArchThinkpad orjanp]# lsmod
Module Size Used by
radeon 78336 1
ohci_hcd 23048 0
ehci_hcd 36488 0
irtty_sir 7552 0
sir_dev 18636 1 irtty_sir
irda 144184 1 sir_dev
crc_ccitt 2432 1 irda
parport_pc 29252 0
parport 38600 1 parport_pc
rtc 13260 0
pcspkr 4044 0
eepro100 32528 0
orinoco_pci 7552 0
orinoco 44172 1 orinoco_pci
hermes 9472 2 orinoco_pci,orinoco
yenta_socket 23560 0
rsrc_nonstatic 11648 1 yenta_socket
pcmcia_core 51488 2 yenta_socket,rsrc_nonstatic
snd_intel8x0m 19396 0
snd_intel8x0 34624 0
snd_ac97_codec 79224 2 snd_intel8x0m,snd_intel8x0
snd_pcm_oss 56224 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_pcm 98564 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 27268 1 snd_pcm
snd 59492 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10848 1 snd
snd_page_alloc 10244 3 snd_intel8x0m,snd_intel8x0,snd_pcm
i2c_i801 8972 0
i2c_core 23296 1 i2c_i801
usbhid 47744 0
uhci_hcd 33424 0
usbcore 125560 5 ohci_hcd,ehci_hcd,usbhid,uhci_hcd
shpchp 100996 0
pci_hotplug 34760 1 shpchp
tsdev 8256 0
joydev 10560 0
evdev 9984 0
cpufreq_powersave 2176 0
cpufreq_userspace 5680 0
p4_clockmod 6164 0
speedstep_lib 4868 1 p4_clockmod
freq_table 5008 1 p4_clockmod
e100 37760 0
mii 5760 2 eepro100,e100
nls_cp437 6144 1
vfat 14976 1
fat 41884 1 vfat

orjanp wrote:
Thanks.
I installed the 0.15RC1 version of the Orinoco drivers found here.
I rebooted but I still had the 0.13 version. I did a make and make install as the readme file said.
What do I have to do to update the driver?
do you use a PKGBUILD?
update the driver: if it was copied to the right place and the kernel knows about it (depmod -a) it should work
for a start, check under
ls -la /lib/modules/`uname -r`/kernel/drivers/net/wireless/
that your module is installed under the correct location (the orinoco files should be newer than the other ones)
if this is so, make sure you are depmod -a (as root) ... and if even this is ok, then either you are running the new modules or something strange happened

My 7100 is telling me it doesn't support a aac fil...

Similar Messages

Maybe you are looking for