My 80 GB Classic shows a white screen, thats it, please help

So i may or may not have dropped it accidentily,(in a leather case) but anyway the only thing it will do is show a plain white screen, i've tried resetting it(menu+centre button) and ive tried completely restoring through itunes, and it went through that process fine but changed nothing
any thoughts or tips
please help

It sounds like a physically bad display. There are online services that will diagnose and fix iPods. One that I have seen mentioned is www.iresq.com. I have never used this service (or any other, for that matter) so this is not an endorsement. You can also Google "iPod repair" to get a list of service sites.

Similar Messages

HT1363 My 120 GB ipod classic has a white screen that I cant get off. What can I do to fix this problem

My 120 GB ipod classic has a white screen that I cant get off. What can I do to fix this problem

Hello onemeeks,
If your iPod is unresponsive, it may be best to run through the following troubleshooting assistant:
Apple - Support - iPod - iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thanks,
Matt M.

Hey all , my apple ipad 16gb wifi only is showing a blue screen !! please help ! how do i fix this . what does it mean ? thanks in advance .

hey all , my apple ipad 16gb wifi only is showing a blue screen !! please help ! how do i fix this . what does it mean ? thanks in advance .

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

Itunes just shows a white screen that says "ipod"

Hi!
My boyfriend just bought an 32 gb ipod touch. When he plugged it into his computer to sync with itunes, the ipod touch was recognized, but instead of the normal screen that shows the touch's serial number and other information, as well as the tabs for syncing music, videos, and applications, all we see is a white screen that says "ipod." I plugged my 32 gb touch into his computer and itunes worked fine. Any advice? Is the ipod the problem or is it itunes?

Try:
- Resetting the iPod. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try placing the iPod in Recovery Mode and then restoring via iTunes.
iTunes: Backing up, updating, and restoring iOS software

White Screen of Death, Please Help

Hey Guys ;
I have an imac 2010 with windows installed on it (No MacOS is installed). today I updated the windows and shut it down and after a few hours I turned it on but now I am only getting the white screen ! it doesnt boot up at all ! I dont know if this problem is related to windows update or not. it may be only luck that this has happened after updating my windows.
I tried to boot it from CD or a flash drive , but holding the option key or d or c doesnt do anything. when holding the option key , even the mouse cursor doesnt appear !
the only thing that works is reseting the PRAM , when I hold the option and command and p and r , I can hear the second chime , but still it doesnt boot up. it is why I am sure my keyboard is working. also I tried to reset the SMC but no results.
also I tried command + r and command + v , but no luck ! only white screen.
I dont understand why I dont get any kind of output ! even if my hdd is broken I should be able to boot from a CD , right ? or at least it should show some kind of error message or logs. but only white screen.
do you have any suggestions ?

Yes , I was using the original grey DVD. I tried holding all possible keys ! nothing worked.
Eventually I found out my HDD is dead , I opened my iMac and disconnected my HDD and now it can boot from CD. but the problem is that it shouldnt work this way. I have had a PC for many years and even if HDD dies , you can go to bios or boot from other devices and etc. it shouldnt cause a white screen of death !
may be apple is doing this intentionally so it can charge people for fixig their imacs ! it is not something complicated , it was just a dead HDD and I was getting no error messages or anything, Just a dead imac. thats frustrating.

White Screen on Startup - please help

Hi,
I'm having problems starting up the imac when i have an external usb hard drive connected. When I turn the computer on or restart, it will freeze on a white screen until i manually turn it off by pressing the "off" button.
I'm pretty sure its the USB drives, as this doesn't happen when I have them disconnected, but its really troublesome having to disconnect and reconnect everytime i want to restart.
I have the startup disk specified in preferences for the windows partition in the internal hard drive. (the external hard drives that are causing a problem are not being used to boot)
any help is greatly appreciated.
thanks

found out its te cdfs partition on the external drive

Ipod touch not responding blank white screen cant reset please help?

Please Help!!
I Just got the new a new ipod touch which was working fine. I began updating to new apple software and while doing so I lost internet connection and ipod was unplugged. Now all I get is a blank white or green screen even after reset. The ipod won't even register when plugged into computer or itunes. What can I do?? If I wait until the battery dies and run a restore will it work?? If so How do I get the games back I purchased recently? Please help I'm pretty new to all this.

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013

User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013
I can login with the these AD users and AD direct import is working just fine. We are not using UPS.
With admin user when I click on the user it shows up proper data. But when I login with the same user it does not show me userdisplay/useredit and shows blank data. Also another strange thing is when I add new item in list with these AD users created by
modified by is blank and its really strange. I checked user information list, tried to rerun user sync with direct AD import option but no success.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
According to your description, my understanding is that the page is blank when the use accessed /_layouts/15/userdisp.aspx and the created by field was blank when the user created a new list item in SharePoint 2013.
I tested the same scenario per your post, however I cannot reproduce your issue.
For troubleshooting this issue, I recommend to verify the things below:
Check the permission of the user in the corresponding site collection to see if he can access /_layouts/15/userdisp.aspx.
Delete the user from AD and SharePoint, then re-add the user to AD and grant proper permission to the user in SharePoint to see if the issue still occurs.
Did this issue occur with all the users? Add a new user in AD and test the same scenario.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

Hello Friends,
I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
(I'm using windows 7)
Friends, Please help me with the above problems. It will be a great help.
Thank You.
R.SAMALA

Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock

My macbook was stolen last month from my car. It would not power, it showed a white screen with folder with question mark in the middle? I don't have my serial number, is there a way to possibly track my computer?

My car was broken into in Uptown, MN last month and my Macbook was stolen along with my Wifi device. Although my computer would no longer power, it showed a white screen with a folder and question in the middle and then shut down. I hadn't had a chance to take it to have it checked, but is there a way to track my computer if I do not have the serial number? And if I purchase another computer is there a way to get the music that I purchased in iTunes back?
Thanks

Regarding your music, yes you can download it again at no cost. Launch iTunes on the new computer, and sign in to your account using the same Apple ID you used previously. Go to the iTunes Store. On the right side under Quick Links select Purchased. Click on All Songs in the upper left.You'll see a list of the music you purchased from iTunes. In the lower right corner click the Download All link. Note that this may take a long time, particularly if you have a lot of songs. Use the fastest Internet connection that you can.
About the computer, unless tracking software was already installed on it and turned on there is no way to track it.
I would suggest changing passwords of any accounts that you have on the computer, such as email. If you have any credit card information stored on the computer, have them cancelled and replaced immediately.
Sorry to hear about your loss. It is very distressing, I know.
Best of luck.

What do i do if my ipod wont turn on/off, shows a white screen, wont do anything, and wont connect to itunes

what do i do if my ipod touch wont turn on/off, shows a white screen, wont do anything, and will not connect to itunes

Let the battery fully drain. After charging for an hour try a reset
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
and restore as necessary.

On start up my Mac Book Pro shows a white screen with a spinning wheel. I have tried starting up with the Snow Leopard disk - all I get is a blue screen. I guess that this is a major repair job??????

On start up my Mac Book Pro shows a white screen with a spinning wheel. I have tried starting up with the Snow Leopard disk - all I get is a blue screen. I guess that this is a major repair job??????

If you have the exact same problem - take the computer to an Apple store or an AASP. Whichever is more convenient for you. If you have AppleCare call them!

On start up my mac book pro shows a white screen with a folder with a ? in it then switches to the apple symbol with the loading bar under it but it freezes about half way any ideas

My mac book pro on start up shows a white screen with a folder with a question mark in it then switches to the apple symbol with the loading bar under it but it freezes about half way. Only started to have problems since upgrading to yosemite any ideas.

I do hope you have recent backup, because it look like your hard disk is failing. You can start up in Recovery Mode, and run Disk Utility to see if the disk can be fixed: OS X: About OS X Recovery - Apple Support

After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help

After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help

Avoid using hand-tools or power equipment .
"My mac book did not come with dvd. Now what should i do?"
Bring it to the Apple store. They can help.

Importing video frames to layers show a white screen?

I've been trying to make some GIFs but when I try to import the video frames to layers it shows a white screen instead of playing the movie. All of them work on windows media player but I've heard that a lot of it has to work on QuickTime. I've already updated the program but it still won't work. A friend of mine also told me that it might be the format of the video. Is there anything I could do to fix this?

I had to reread your post a few times, so I hope I understood correctly. LOL.
When you import a video say a mov or avi file and it does not display correctly, odds are that video is using a codec that is not supported by photoshop or quicktime.
There is a very limited amount of codec for avi's that will work. If your computer is fast enough, use the full frame/no compression option when saving the video. This option even though it is a larger file and can bog down your computer, it will work when all else fails.
Another option is to save the video as an image sequence. Either option also can support transparency. Keeping in mind some image formats like jpg do not support transparency even though that would reduce file size.
As for other codec's take a look at the list in the options photoshop's export for video{File>Export>Render Video}, and compare them to those in your video editor.

My 80 GB Classic shows a white screen, thats it, please help

Similar Messages

Maybe you are looking for