My 8510w is powering on with a new battery of 8200 series

Hi,
I am using HP Compaq 8510w mobile workstation and purchased a new battery. but after 1 or 2 days battery does not power on the laptop and shows 98% remaining. furthermore HP support assistance battery check is displaying an error while checking the battery. I don't know what to do.
Please help to recover the problem!

Contact the seller of the battery. There is nothing you can do to "fix" a battery.

Similar Messages

I cannot get more than 12 to 14 hours out of a full charge, and with a new battery. Is the phone dying?

I cannot get more than 12 to 14 hours out of a full charge, and with a new battery. The battery has been charged at least a dozen times, so I know it's at full charge. Is the phone dying?

Do a Li-ion battery rebuild. Do a full 6-8 hour charge with device in sleep mode, next run it down to about 45-50 % and then a 4-5 hour charge. After that use your phone and take it down to 30%. Another 6-8 hour charge and then down to no lower then 20-25% and one more full 8 hour charge. At that point your battery should be rebuilt back to a normal life cycle. This should eliminate your battery problem.

Does itune works with the new Sony Walkman X1000 series?

can anyone inform me whether itune can work as a media manager with the new Sony Walkman X1000 series?

It will not work with iTunes.

Nomad MuVo will not power on even with a new battery. USB works fine, just No Green

It was working fine. I didn't use it for a couple of weeks and thought the battery was dead. But it will not even come on with a new battery. Any suggestions?

Since it connects properly to the pc, I suggest loading the latest firmware into it.
http://www.nomadworld.com/downloads/...d=NOMAD%20MuVo
Make sure that is the correct firmware for your exact Muvo model. If not, then choose the proper one.

I have an iphone 3gs the old battery was useless so i replaced it with a new battery but it wont hold a charge now it used to charge to old battery but would just turned off if disconnected to its not the dock connecter any advice

i have an iphone 3gs the old battery was useless so i replaced it with a new battery but it wont hold a charge now it used to charge to old battery but would just turned off if disconnected to its not the dock connecter any advice

Advice:
1. Learn to use punctuation and sentence structure - your post makes little sense.
2. I'm getting the idea you now want to use your old "useless" battery. Why, if it's useless?

Help with brand new battery

Hello, My birthday is Feb. 20. Because I recently got an iBook with a dead battery, I thought I would treat myself and get a new battery for my iBook. Well, I have had it in my iBook for about 5 days and it worked fine. But the other day, I powered up my iBook, and the battery was at 97%. It said it was running on AC power, but the charging light was still orange. It also said it was fully charged at 97%. How could this be? It's only a few days old. Please help me fix this problem. Thanks.
P.S I let it run on battery power for a while, I got it down to about 95%. Then I plugged it in. It said it was fully charged. Why is this happening?

Hi Carmen
Does the charger ever turn green? I wonder if the charger is working properly and was the cause of the flat battery previously.
If you think the charger is OK, then you may need to reset the PMU.
Ronda Wilson explains how to do this:
• If the computer is on, turn it off.
• Reset the power manager by simultaneously pressing and then releasing Shift-Control-Option-Power on the keyboard. Do not press the fn (Function) key while using this combination of keystrokes.
• Wait 5 seconds.
• Press the Power button to restart the iBook computer.
Some people have reported that they needed to repeat the procedure multiple times for it to work.
Check that Resetting the PMU is the coreect method for your particular computer by looking at this link:
http://docs.info.apple.com/article.html?artnum=14449
However before you do this try and verify that the charger is working properly, as that could be the problem. Perhaps you could borrow a friend's charger if possible and see if your battery can be charged up by it.
regards roam

My Macbook (2006) with a new battery empties its battery overnight in sleep mode, why?

It's now been six months that I can't use sleep mode if my macbook is unplugged because the battery gets empty overnight. I had to replace my battery three months ago and I thought this would solve my problem. But, although my new battery lasts for over 4 hours, it is completely empty after a night in sleep mode. I checked the Internet but I found nothing. I've tried to reset the energy management system, but it did not good.
The mac really goes into sleep mode (I can see the brightness of the white light change when the lid is closed).
My macbook has a dual boot Mac os Lion and Windows 7 with bootcamp and the problem is the same whether sleeping under Mac OS or under Windows 7.
I tried turning bluetooth and wifi off, but it doesn't change anything.
I hope someone can help.
Thanks in advance!

Thank you for your answer,
I tried to log out and put the computer to sleep, but I still lost 40% of the battery in 10 hours (I reckon it is a little less than when I'm not logged out).
I reset the SMC again, no result either.
The computer does look like it is sleeping, the display is off, the light is changing and if I touch a key of the keyboard, it turn itself back with the sound of the CD check.
Does my answer help the diagnosis?
Would reinstall the whole computer solve my problem?
Thanks!

Does a refurb come with a new battery

does a refurb come with a new battery

dreed75
I will be happy to answer your question.
In the event you have to receive a replacement (Certified Like New Replacement) we will send you the shell of the phone itself.
You will need to keep all accessories (battery, battery door, cases, memory cards) and transfer them over to the replacement phone once you receive it.
If you had an issue with the phone & the battery, then we would most definitely send a brand new battery unless your battery was exposed to moisture and/or physical damage.
Keep in mind the original battery does come with a 1 year manufacturer warranty (as long as there is no physical or moisture damage)

Having problems with brand new battery installed...Help please!

Here's my problem. I just recently replaced the battery on my 13" Macbook. The brand new battery ordered from Apple arrived on Saturday and up until last night everything was great. Now all of a sudden the computer is doing the same things it did with the old battery. I am getting the green light on the MagSafe Adapter even though the battery is not fully charged. I am also alternating between "Not Charging" on the battery icon and a "X" on the icon.
I did some reading and tried resetting the PRAM and SMC. I even uninstalled Leopard and reinstalled Tiger (updating everything afterwards), thinking maybe it was a software issue. (I just recently installed Leopard and hoped it was just a bad install.) None of that really seems to work.
There is one slight exception- the SMC reset. After I do the SMC reset I get the amber light from the adapter, the icon shows charging and all is well for about 15 to 30 minutes. Then I am back at square one.
I was wondering if anyone had any suggestions or ideas on what could be going on. Any help would be greatly appreciated! Thanks!
Message was edited by: luckylindyhopper

It seems like you have eliminated all the easy fixes for your problem - what is left is the computer itself. Call Apple (800-275-2273) and explain the troubleshooting you have already done. They should set up a repair for your computer. If it is out of warranty you may have to pay for the repair.
Best of luck.

What to do with a new battery..?

I recently got a new battery because my old one went bad. Am I suppose to charge it until full, then leave it on full for a certain period of time? Or can I just start using battery power now. I heard there is a special way to process your new battery once you put it in your computer.

Have a look at this Apple page on notebook batteries.Especially the section on calibrating your battery for longer life.

Just ran my pro with brand NEW battery...

i got the new battery from apple yesterday and let it charge up and shut it down overnite.
i ran it off the battery this morning and it lasted 3 hours...
i was doing my usual surfing and emailing, had the screen on bright, the backlighting was on for a bit and that's about it.
what's interesting tho is that the old battery cycle count was 43 and this one reads 0.....i think i'll call apple tech and ask about that....
ps it seems to run faster too.....loading pages etc.
www.ronpaul2008.com

what's interesting tho is that the old battery cycle count was 43 and this one reads 0
It's zero because it's a new battery, and hasn't been through a complete charge cycle yet. The "counter" doesn't use fractions, and doesn't round up. Just like a new baby if you count age in years - they're not one year old until a year from their birth day...
I'd call ~3 hours normal for battery life on an MBP.

My Canon EOS Rebel T4i will not operate with a new battery. What could cause this problem?

While take pictures with my Canon EOS Rebel T4i camera it died. I assumed it was a dead battery. Upon charging the battery it would take just a few pictures and die again. I purchased a new cannon battery and fully charged it and now the camera will not even come on. What could cause this?

Sounds like the micro-switch in either the battery door or memory card door is barely making contact. If either of those two doors are opened the camera will immediatley power off. The micro-switch is in the door frame. The door itself has a tab which pushes on the switch.

**bleep**ed luck with my new Battery

hi every one ... I have a problem with my battery :\ ... the machine is showing to me "Plugged in , Charging" but it's fixed on 3% ..... i've change the battery and it's a new one ... guys can you help me :\

Hi
Since you are facing an issue with Battery Charging please click on the web link given below should be able to help you to resolve the issue on your unit.
Testing and Calibrating the Battery (Windows 8)
Testing and Calibrating the Battery (Windows 7)
Calibrating the Notebook Battery (Windows Vista)
Since I am not aware of the Operating System (OS) on your Notebook, please select the one applicable for your unit and follow the steps accordingly.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
* Click on "Purple Thumbs up" button to the left side of my post to say thanks!
Regards
Ahmed

Problem with a new battery for lenovo g530

i've perchased a new Lenovo Battery for my G530 4446-24G laptop and i can't turn on the computer with the battery only and in addition to that when the computer is connected to power i can't turn on the computer unless i unplug the battery from the computer and than after i've turned it on with power , plug the battery back to the computer.
can you help me solve this problem? is this a battery or computer problem?

I have had the very same issue. If I start my G530 up and the battery is installed, it won't start. If I remove the battery and start the laptop using AC power, it starts fine and I can then reinsert the battery and all continues well. In addition, I can shutdown the laptop (with the AC power remaining plugged in and the battery inserted) and it will start up just fine. It's the INITIAL start that requires the battery first be removed. As is obvious, the laptop can't be started up using only the battery (no AC power). The laptop didn't behave this way originally but does so now.

HT3964 I have a Macbook 2.1, running 10.5 8. with a new battery. It won't start with the battery, but after you start it with the charger, disconnect the charger,it will run for over an hour on the battery,all the while it shows 0% charge! tried reset, no

I have a Macbook 2.1 that runs 10.5.8. I cannot get it to start on battery power. It will run for over an hour on the battery, if you start it with the charger, but even then it shows a 0% charge! I've tried pulling the battery out while it's booted, pulling battery out and discharging the system by holding the power switch, nothing seems to make it work. any ideas? It has all the updates Apple offers, too.

Try resetting the SMC
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.

My 8510w is powering on with a new battery of 8200 series

Similar Messages

Maybe you are looking for