My 8900 curve hangs after unlock code?

Hi all
I bought a blackberry curve 8900 second hand from a market thinking all I had to do was unlock the network and my sim card would work in it.
However when I enter my chosen sim a message comes up saying 'invalid sim' and at the startup page it reads 'the current sim card requires an unlock code do you want to unlock it now' I went to a shop to get this phone unlocked and the code used came up with the message 'code accepted' but afterwards the phone freezes (still displaying everything that was on the screen before) and the only thing I can do is a battery pull and this leaves me back at step 1
Sim lock I believe is t mobile uk (due to settings and startup logo being t mobile)
Do you know what could be the cause of this fault? I know it is not a software fault as I had a shop re install the software and the phone still freezes after the code has been 'accepted'
The phone us functioning in every way, I can use everything just not text, make calls (basically anything requiring a sim) even a tmobile sim comes up with 'invalid sim' and I an worried I have gone and bought a paperweight
Regards

I may have misunderstood, but it seems like you are talking about 2 types of "unlocking" here.  You mentioned that you forgot your password, I'm assuming this is the lock password that you personally set on your BB lock screen to prevent unauthorized access?  If so, I'm not aware of any way to retrieve that lost password.
You also mentioned using your BB on a different carrier.  That type of "unlocking" is network unlocking.  To use your BB with a different carrier, you need an unlock code for that.  You can unlock your BlackBerry here.  Since you only have a few attempts left, my suggestion is to use the Checkout by MEP method which always generates the single 100% correct unlock code.
To checkout with this method, you'll need to obtain your BlackBerry's MEP number (note that this is different from the MEP unlock code) which you can get from either here or here.
Alternatively, you can just order your code using the Country/Network your Blackberry is CURRENTLY locked to as well as the model of your BlackBerry.
Good luck, let me know if you need help.
EDIT: Links removed. Please review User Guidelines  under section "No spam please."

Similar Messages

  • Curve 8520 unlock - unlocking code "ME-Code" required

    Hi,
    I have an old but working Curve 8520.
    It was used as prepaid mobile in Germany. Now after 2years time, I can unlock the mobile officially by sending the IMEI Number and getting a 16 diget code back.
    After entering the "new" SIM card Curve 8520 is now asking for a ME-CODE !!
    I tlaked to the store people but nobody seems to able to help.
    The unlock code i recieved seems not to be the ME-CODE to unlock my BB
    Any feedback is more than welcome
    Cheers from Germany
    Best
    Marco

    Sorry, in 1o years of using a BlackBerry, unlocking my own devices and helping others, I have never heard of a "ME-Code".
    I would suggest you contact your mobile provider and inquire.
    Or, try another SIM card.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

    Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

    Hello HaithamOkeely,
    We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • BlackBerry Curve 8520 - in need of unlocking code

    I want to unlock my BB Curve 8520, so that I can use it in Europe with a local sims card when
    visiting family, etc.
    Anybody any idea how to do that??
    I asked ATT, but they told me I had to go to RIM to get this............  RIM says I have to to my carrier
    to get this................
    Thanks for quick responses!
    Loekie Maddra
    Solved!
    Go to Solution.

    Did you buy the device from AT&T? Do you have an account with them?
    They should give you the unlock code for free, tell them you are traveling internationally and need it.
    The local reps in the store likely can't help you. Call ATT direct.
    There is no real VoIP for BlackBerrys yet, other than Google Voice.
    and UMA calling which ATT does not offer.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to unlock blackberry curve 3g 9300 with the unlock code

    I have the same problem and could not unlock my blackberry curve 3g 9300 from Canada's wind network.
    I have called my network provider twice and obtained the unlock code. I also called back to reconfirm the unlock code.
    However each time I tried to unlock my blackberry curve 3g 9300 with the unlock code ,it refuses to unlock.
    please assist me with a solution.
    I am John Green
    Calgary,Canada

    After the ten attempts have been used, you must get RIM to unlock the device.
    There are two routes, and only two, to achieve this.
    * IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
    * If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT6058 unlock code after download

    My phone locked after the download.  What is the unlock code?

    Need more details, please - what download do you mean?

  • Blackberry Curve unlock codes

    I bought a Blackberry a year ago and had it unlocked for T-mobile. Now I got another Blackberry Curve same type and have to unlock that one. Do I need a whole new unlock code or will the code from the first one work?

    Yes, you need a new unlock code, they are unique for each device.
    Tmobile should provide it free to you if your account is in good standing.
    If you need to unlock your BlackBerry for use on a
    carrier other than the one to which it is branded, check out BlackBerry
    Unlocks
    and read this link for instructions.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Just unlocked Blackberry Curve 8520 with online code, now cannot make calls or send sms! PLEASE HELP!

    Hi,
    I unlocked my phone about an hour ago using a legitimate unlock code from unlocks.co.uk. I entered the code and it seemed to work fine and now my network shows up as Vodafone uk (I have unlocked it from T-Mobile)
    It looks as though it is unlocked and I have checked the connections - I have signal and it says I am connected to the vodafone network, however, I cannot make any calls or send texts! If I try to call a number I get the call failed signed and the failed call dial tone. I tried to send a text but it didn't work - the text now has a red X and says 'unidentified subscriber'. I know this is a fault with my phone as the people I have tried to text and call have no problems with their phones/networks.
    Please somebody help me! I have no idea what to do! I contacted the unlocking company and they say if I'm sure the sim I'm inserting is active (which I am) then it is likely my phone has been blacklisted, but I dont think it has. I bought it as a pay as you go handset from Argos just a week ago and it's been working fine until then. 
    I put my old t-mobile sim back in and it seems to work - does this mean it hasn't been unlocked successfully or not? 
    Many thanks

    Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    Then try your Vodafone SIM again.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • E90 still asking for unlock code after hard reset

    I forgot the unlock code for nokia e90 i bought used. it was bought from ireland. so i was searching the forums and i found the *+3+call button+switch on technique to hard reset. the hard reset is complete but fone asks for code and now i am totally struck. please help.

    The full reset only resets the unlock code for a few models. Obviously the E90 is not one of them. This means it can only be reset by a Nokia Care Point. You will need to bring proof of purchase/ownership with you.

  • Restart after MEP code entered

    Dear all,
    I have a blackberry curve 8520 and I am experiencing a problem.
    My device is locked after I accidentally used a wrong SIM-card. Now the device is asking for a MEP code (10 tries left).
    I legally obtained a correct MEP code. Unfortunately the blackberry restarts/crashes immediately after the MEP code is given (this happens with any code entered, correct or incorrect like '0000').
    When rebooted, the device is still asking for a MEP code and still shows that there are 10 tries left (so obviously the code is not being processed).
    This seems to be a common occurring problem with multiple blackberry devices. For example see:
    - http://forum.gsmhosting.com/vbb/f272/blackberry-restarting-each-time-mep-code-entered-952753/
    - http://forum.gsmhosting.com/vbb/f489/8520-restarts-after-i-put-mep-code-1298217/
    - http://forum.gsmhosting.com/vbb/f489/hang-restart-when-entering-mep-code-1328313/
    Is this a hardware problem? How can this be fixed? Do I have to send my phone to RIM? (if so, where//how)

    From what I understand that I have been told, after the 10 unlock attempts, RIM is the only one who can physically remove the carrier lock, and it must be done physically by them, with the device in their hand.
    I would recommend that you contact your carrier and ask for RIM level tech support, and inquire there. The forums here won't get you that support.
    Message Edited by JSanders on 04-06-2009 03:50 PM
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry 8900 Curve

    Hi All,
    I'm new to this site, but love blackberry phones. I need some help though.
    I'm looking into getting a Blackberry curve 8900 in the UK. Will this phone work in the USA?
    Thank you 
    Mark
    Solved!
    Go to Solution.

    Yes, it will.
    Get it unlocked from your carrier in the UK so that you can use while travelling. They should do so for free.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Icons/Applications have suddenly dissapeared from my BB 8900 Curve

    I have a BB 8900 Curve and it has been working fine up till now. A few applications/icons have dissapeared from my phone and I haven't changed anything. So now my icon for textmessaging is gone, also the BBmessager, and the icon profiles that shows if you want the phone to ring/quiet.
    I did not hide them in the menu.
    Can anyone please help me !!!
    Thanks
    Solved!
    Go to Solution.

    Greetings, and welcome to the BlackBerry.com Support Forums.
    See if you have moved them in to a folder?
    Try a simple reset: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
    Look all over again, and click the menu to SHOW ALL just in case.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Forgotten unlock code/froze​n keyboard

    i have forgotten the unlock code for my BB curve 8530. It was freezing up and after hard restart would only go to device locked screen and allow me to switch betwe3en the choices but then would not go to screen i chose. Have downloaded the desktop software and been prompted for the unlock code. Should i have some confirmation code documentation that may have been sent to me, because i cant seem to find any. I bought the phone used and cant remember if i had to have the code to activate it or not. Can somebody please help me out on this, this phone now belongs to my teenage daughter and we all know what a teenager w/o a working phone is like to be around!!!!  NOT PLEASANT!!!!  lol

    Hey sidetrack68,
    Welcome to the BlackBerry Support Community Forums.
    If the BlackBerry smartphone password is numeric and the Alt key is not pressed when typing the password, the password entered is alphabetical, not numeric.  So for example if the password is 123 and you did not hold down ALT then the password is QWE.
    The device password can not be reset, you'll need to enter the password incorrect 10 times to wipe the device, all data well be lost.
    I hope this helps.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • BB 8900 Javellion Hangs

    Hi,
    I am a user of BB 8900 Javellion. This phone hangs too much. Please can anyone help me by giving solutions for solving this problem.
    Also if phone re-starts / re-boots, time taken for startup is about 15 Mins.
    Regards,
    Ashutosh Karnik.

    The latest officially released OS for the 8900 is linked below... download and instructions in the link.
    Do your own backup first, using Desktop Manager.
    http://www.blackberryforums.com/general-8900-series-discussion-javelin/206252-latest-os-8900-4-6-1-4...
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • 8900 Curve Calender Help

    Hi all
    Does anyone know how to clear all the entires from the calender on a BB 8900 as Facebook has decided to put everyones birthday into my calender and I dont want them there.
    Thanks muchly in advance for your replies.
    Andy
    Solved!
    Go to Solution.

    Here you go... (ignore the mention of your Address Book, this process works for both Address Book or Calendar, in your case).
    If you are having errors in your Calendar or Address Book on your BlackBerry, and you wish to delete the entire Calendar (or Address Book) database on your BlackBerry, follow the directions below. Make certain you have a good copy of your Calendar or Contacts elsewhere, as this procedure will complete delete ALL Calendar entries and/or Address Book entries on your BlackBerry.
    1. Open Desktop Manager on your PC.
    2. Open up Backup/Restore > Advanced.
    3. From Advanced you'll see a split pane screen. The left pane is what is going to be backed up from your device and the right is a list of the currently existing databases.
    3. Highlight on the right side your Address Book database (or your Calendar database) and click the arrow in the middle pointing to the left. This will copy the information over and prepare it for back-up.
    4. Once the back-up has completed, hit the Clear button at the bottom to erase and clean out the entire address book database (or Calendar database).
    5. After it's finished, it will ask you if you want to save the back-up you've created, say yes and check the device to make sure the address book (or calendar) has been properly cleared out. Now, resync the necessary contact information and you should be set to go.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • F110 - Posting orders: 2 generated, 0 completed???

    Hello, Carried out Automatic Payment Run through F110 Posting orders: 2 generated, 0 completed In Payment Run Log,  Accounting Docs. are shown however, infact Accounting Docs. are not generated by clearing open items within vendor account. Open Items

  • Data Socket

    I am reposting this message and hope someone can help me.... I have been using Data Socket to pass information from a control computer to two remote computers. At various times throughout the day the connections, between the control computer and the

  • How can I keep incoming messages in chronological order, rather than having them grouped together by sender's name?

    After I open a message, when I next refer to my inbox I find that it has been grouped with other messages, either by sender's name or by subject line. As far as I am aware I did not ask for this and want messages to remain in my inbox in the chronolo

  • Timecode changes when batch capturing

    I am capturing betacam sp footage into FCP 5.1 on a dual G5 2.3 box, and using a Kona LSe card. Timecode is running through the 422. For the most part, things are going smoothly, but I am now running into an issue where when I batch capture my logged

  • Categorization Schema overlaps

    hi everyone, I'm creating a new categorization schema. When i insert in application Area "service order" and subject profile "SAP Standard Damage" it returns a me an another schema, in schema per Application Area, because the system have found anothe