My Acer Liquid Z200 freezes at the boot screen

I have my Acer Liquid Z200 with me for a couple of months already. It has been a great experience for me. But just yesterday, I drained the battery to the fullest for I greatly needed it for a report. (I was unaware that it was already low on battery.) Then after charging it for a while, I turned it on. It just shows the Acer logo and 'powered by android' display below. Then it freezes right there. I tried waiting for it for a couple of minutes. (That was like 30 minutes.) But still nothing happened. I already wiped the user data/factory reset and the wipe cache option through the cwm recovery but still no signs of positivity. i also tried charging it hoping that it was just a dead battery, but still nothing. I am looking forward to wiping the phone and flashing a new firmware but I wanna first consult it here. Any solutions please? Thanks!

CWM recovery? this is not the stock recovery. by the way, the only solution is to flash system again.

Similar Messages

  • My Macbook Pro locks up on the boot screen

    I've had my Macbook pro since mid 2008 (15-inch model) and last time I used it, it froze while I was typing a paper and I had to force shut it down. When I turned it back on it gave me the start-up tone like normal, but after a few moments on a boot screen the spinning icon would just freeze and sit there. I could still hit my volume keys and could hear the blips go up and down as the volume adjusted. I first tried booting it in safe mode. A progress bar showed up, but about 30% through filling it vanished and the computer locked up again. I've tried resetting the PRAM, holding down option when I start the computer (I'm using Lion and both the normal HD and recovery HD options have the exact same result), I even tried putting in the install disc and holding C while the computer starts up and though I can hear the disc drive working the computer just acts like there's nothing in there at all. This is really driving me crazy, I really would like to get my Macbook working again and I can't afford to just replace it. Any insight anyone could offer me would be very greatly welcome because no matter what I do I just get returned to the boot screen and the spinning icon just locks up every time after a few moments

    Hi daviscouch,
    Thank you for using Apple Support Communities.
    To troubleshoot this issue where your Mac will not boot past the gray screen with spinning gear, please follow the steps in the article below.
    Mac OS X: Gray screen appears during startup
    Cheers,
    Alex H.

  • OS is loaded and running but screen freezes on the loading screen

    My laptop is freezeing on the loading screen but the os is loaded and running. I know this because i was able to use command keys to open itunes and play music. At first i thought it was the hard drive so i replaced it and i am still having the same problems. I'm stumped, can anyone help me?
    Some one please help?

    "The gray boot screen with the apple and the loading ring."
    "i was able to use command keys to open itunes and play music."
    You could do that from the "gray boot screen?" Didn't know that was even possible!
    Disconnect all devices from your computer and do the following:
    Boot up from your install DVD and run *"Repair Disk"* from the Utility menu. If you are able to reach the desktop after doing the above, repair permissions and restart your computer afterwards.
    !http://i50.tinypic.com/izvwo1.gif!

  • My MacBook freezes on the Apple Screen

    My MacBook freezes on the Apple Screen. What should i do?

    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk. You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
    Then Repair Permissions.
    No need to report any Permissions errors........we all get them.
       DALE

  • Freezing on blue boot screen.

    My Ibook g4 is freezing on the blue screen right before the login screen. It seems like once and awhile (very rare) it will make it past the login. For example I haven't booted the computer in a few weeks, today it started up just fine and crashed about 2 or 3minutes later. It also sometimes freezes at the grey boot screen with the rotation indicator. I've tried booting in safe and single user mode and still have the same problem. I'm pretty sure I don't have much hard drive space left on the unit. I'm not really sure what the problem could be and im starting to think from reading up on it that its a logic board problem. Any input would be great.

    Welcome to Apple Discussions!
    It does sound like it could be a logic board problem, but if your hard drive is too full, that could be a problem too. Does it work any better when cold and if you squeeze the lower left corner? If so, that could point towards a logic board problem.
    Do you have access to another Mac? If so, it might be possible to access your hard drive using Target Disk Mode and rescue your data. You really want to get your data saved before you do much else.
    Do you have all the original CD's that came with the computer? Can you boot off of a CD? If so, you could go to Disk Utility on install disc #1 and see if you can verify and repair if necessary both permissions and the disk. You click on the brand name to do this. To check on how full your hard drive is, you can click on MacIntosh HD and see what it says at the bottom.
    Once your data is rescued, you could try a clean install of the OS, in case corrupted software is part of the problem.
    Good luck!

  • A few times when i try to quit out of firefox, it causes my new mac osx (version 10.6.8) to freeze--turning the whole screen whitish blue, which is the same color before the mac is to shut down. Why??

    Three times over the last three months when i try to quit out of firefox, it causes my new mac osx (version 10.6.8) to freeze--turning the whole screen whitish blue, which is the same color before the mac is to shut down. Why??

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • I have a MacBook Pro 13.3 OS- MAC OS X LION.Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.

    I have a MacBook Pro 13.3 OS- MAC OS X LION.
    Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
    I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
    Thank you for any help in this regard that comes fast.

    The details of the kernel-panic report is as follows-
    Interval Since Last Panic Report:  1458653 sec
    Panics Since Last Report:          6
    Anonymous UUID:                    70BA6A**************************************************
    Sun Sep 16 23:00:13 2012
    panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
    RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
    RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
    R8:  0xffffff80ef3d3f08, R9:  0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
    R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
    RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS:  0x0000000000000008, SS:  0x0000000000000000
    CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80ef3d3a50 : 0xffffff8000220792
    0xffffff80ef3d3ad0 : 0xffffff80002c4794
    0xffffff80ef3d3c80 : 0xffffff80002da55d
    0xffffff80ef3d3ca0 : 0xffffff8000290560
    0xffffff80ef3d3dc0 : 0xffffff800026c9c3
    0xffffff80ef3d3f40 : 0xffffff80002c3fbb
    0xffffff80ef3d3fb0 : 0xffffff80002da481
    BSD process name corresponding to current thread: fsck_hfs
    Mac OS version:
    11E2620
    Kernel version:
    Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
    Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
    System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
    System uptime in nanoseconds: 4850001132
    last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
    loaded kexts:
    com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2
    com.apple.driver.AppleUSBTCButtons    227.6
    com.apple.driver.AppleUSBTCKeyEventDriver    227.6
    com.apple.driver.AppleUSBTCKeyboard    227.6
    com.apple.driver.AppleIRController    312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.SCSITaskUserClient    3.2.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCISerialATAPI    2.0.3
    com.apple.iokit.IOAHCIBlockStorage    2.0.4
    com.apple.driver.AppleFWOHCI    4.8.9
    com.apple.driver.AirPort.Brcm4331    560.7.21
    com.apple.driver.AppleSDXC    1.2.2
    com.apple.driver.AppleUSBHub    5.0.8
    com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleAHCIPort    2.3.0
    com.apple.driver.AppleUSBEHCI    5.0.7
    com.apple.driver.AppleUSBXHCI    1.0.7
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.3
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.7f2
    com.apple.iokit.IOBluetoothFamily    4.0.7f2
    com.apple.driver.AppleFileSystemDriver    13
    com.apple.driver.AppleUSBMultitouch    230.5
    com.apple.driver.AppleThunderboltDPInAdapter    1.8.4
    com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.4
    com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
    com.apple.iokit.IOUSBHIDDriver    5.0.0
    com.apple.driver.AppleUSBMergeNub    5.0.7
    com.apple.driver.AppleUSBComposite    5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.driver.AppleThunderboltNHI    1.6.0
    com.apple.iokit.IOThunderboltFamily    2.0.3
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
    com.apple.iokit.IOFireWireFamily    4.4.5
    com.apple.iokit.IO80211Family    420.3
    com.apple.iokit.IOEthernetAVBController    1.0.1b1
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOUSBUserClient    5.0.0
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IOUSBFamily    5.0.8
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.5
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.DiskImages    331.7
    com.apple.iokit.IOStorageFamily    1.7.2
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.7
    com.apple.iokit.IOACPIFamily    1.4

  • My 4s freezes on the lock screen after updating to ios 7.0.2

    Ever since I updated my 4s to the ios 7.0.2 the phone constantly freezes on the lock screen. In just one day it froze at least more than 6 times and made me reset many times using the power and home button just to unlock the phone.  Is there a permanent fix for this please help!!! 

    I tried restore backup but it says that itunes could not restore the iPhone 4s because not enough free space is available on the iPhone.. I did it twice but it kept giving me this message. Should I go ahead and restore as new?

  • HT201412 my iphone is not turning on its freeze on the black screen with the apple logo.Please help me guys iam fed up please its a humble request

    my iphone is not turning on its freeze on the black screen with the apple

    - Try a reset.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then connect to your computer and try to restore.
    - See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again.

  • When i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ???

    when i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ??? please i need help with this and how can i fix it

    Here is some pertinent information and how-to's from Apple:
    http://support.apple.com/kb/TS2570
    Post back if these troubleshooting steps do not work.

  • Macbook won't shut down or restart. it freezes at the blue screen.

    first time this happened i didn't notice. But then everytime I shutdown my macbook it freezes at the blue screen until all the battery is dranged, so I have to shut it down by pressing the button. Then I tried to restart it and the same thing happened!
    I don't remember downloading any new apps that night that might have caused this.
    please help.
    Mac OS X 10.6.7

    Hi. Try these steps.
    http://support.apple.com/kb/ts1545
    Good luck!

  • Every time I boot, nether in OSX or windows I get a screen the same as the boot screen just with a buffering wheel. Please Help.

    Hello,
         I'm currently in mac recovery. I have a 21.5'' iMac (I think late 2011). I'm running OSX mountain lion and I think its kept up to date. Every time I boot, nether in OSX or windows I get a screen the same as the boot screen just with a buffering wheel (not the beachball one). This seems to go on for ever (at least 3 hours) ant will not boot. Booting in safe mode does not work and results in the same problem. As I said earlier I can get tom recovery mode. Thanks Oliver.
    I have on/for my machine:
    Mac OSX mountain lion
    Windows 7 Pro 64bit
    4GB of ram
    OSX 10 FULL backups (External 2TB drive)
    500GB HDD
    Please ask if you would like more Information.

    Hello, disconnect any external drives for now.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • HELP: I sync my iphone ios 4 to another iphone ios5, sync was completed but after a few mins, iphone will auto restart and freezes at the home screen which I can't unlock. I have to hold the "home"   "off" button to restart the phone.

    Dear all, please hel!!
    I sync my iphone ios 4 to another iphone ios5, sync was completed but after a few secs, the iphone with the IOS 5 firmware will auto restart and freezes at the home screen which I can't unlock. It will then freeze for a few secs before repeating the restart phase again and again and again.
    To solve this issue, I have to hold the "home"  + "off" button to restart the phone. Afterwhich, it will restart the phone. However, although my stuff are still on the phone, all my sms are gone.
    Can someone please assist urgently.
    My data was transferred from another iphone 3GS which is running an IOS 4.0.1 to another 3GS running ios 5.0.1
    Is there a serious compatibility issue with both firmware?
    Please help.
    Thanks!

    Can't I just set up Exchange as one of my calendars in ical?
    Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
    Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
    No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
    What is the best work around for this?
    None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
    I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

  • Why does my 4s keep returning tot the boot screen (apple logo) when I press the home button to see the lock screen?

    3 or 4 times since I first fired up my iPhone 4S yesterday, it has displayed the boot screen (apple logo) when I press the Home button to display the lock screen. After 10-20 seconds the phone displays the lock screen, but at that point it has to search for a cell signal (as if the phone just booted up), which takes another 20-30 seconds.
    Is anyone else having this issue?
    Another thing that has happened only once, but that seems related, is that when I clicked the lock button on the top of the phone, the phone displayed the spinning circle that usually displays when an iPhone or iPad is shutting down.
    Any ideas on what MIT be causing this?

    Disk repair hasn't worked as well.
    I just wanted to add a quick observation: after I tried the TM restore for the first time, Safe Boot in verbose mode seems to be stuck at this line "VBoxAdpDrv: version 3.1.0 r55467". This may point to the problem being a Virtual Box problem.
    I use Virtual Box extremely rarely - haven't used it in many months. After a re-install, I'm going to remove it and then try the upgrade. If it works, then we've probably found the culprit. If it is real, Apple should maybe add a line saying Virtual Box known to cause problems with this upgrade (or fix it ).

  • S90 stuck at the boot screen

    My S90 is stuck at the boot screen. It shows the booth screen for hours now. If I switch the power button it will not swtich off the phone, but restart it again to the boot screen. What should I do with it? I considered that I could let it run out of battery, but I am not sure how much the phone can run on a simple booth screen with just the lenovo log on the screen. Also not sure if once I recharge it would not have the same problem. Any advice how to solve this?

    I have no idea how it got stuck at the boot screen (the one after powered by android). The phone was out of battery, I connected it to the charger, immediately turned it on, and it got stuck. Draining did not help so I tried to fully charge it. That did not help. It was stuck at the boot screen until 5am (local time) so I had to follow the other instructions. That got me to a menu that let me choose the language between English and Chinese. Then I could reboot the device, power it off, install updates (or something similar), or wipe up device. Reboot or Power still got me back to being stuck at the boot screen. Install updates did not work. So I had to wipe up the data. That gave me two options (a) fuse wipe up data and (b) fuse format data (or something similar). No idea what the difference is, or what that does, but I was worried I will loose all my photos stored on the phone. But since I had no choice I decided to press "fuse wipe up data". That seems to have factory reset the phone. It started normally and it appears as after a factory resent (all my own apps and settings are gone). I had to pick the language and agree with Lenovo license agreement, etc. However, for some reason, all my photos were still in the phone's gallery (why?), so I  am now copying them to the pc. So that's how far I got so far. Thanks for your very valuable help and advice. Let's see if I encounter any more issues with it or any other peculiarities. 

Maybe you are looking for

  • How to restore a software raid mirror after a drive failure

    i set up a software raid mirror with two hard drives in a mac pro. then one failed as reported by disk utility. i replaced the drive. it does not seem possible to restore this raid short of copying the files to a third location and then erasing and e

  • IDOC to EDI file in PI 7.0. ( exchange infrastructure)

    i have to do one application SAP ECC 6.0 -> SAP XI -> Non SAP File Server Non SAP file server accepts only .edi format files. m trying IDOC to File scenario. IDOC generated is not giving exact EDI format which needs to send. How to transfer EDI forma

  • Adding custom GUI components to a panel

    <sorry about the 'Hello All' subject in the previous post> I am creating a Backgammon game for my JAVA programming class. I would like to design a board and have certain checker pieces that can be dragged around on the board. In the course I am takin

  • Using external LDAP server for  WL JNDI lookups

    I'm trying to find out if it is possible to re-direct JNDI calls to the WL server to an external LDAP server. I know you can install an external LDAP server for security purposes, but I would like to use an external LDAP server to handle all JNDI loo

  • CC Desktop App won't open...

    CC website shows the Desktop App is working fine, but it will not open on my end. Even after update?