My action don't record adjustments to curve and levels layers?

Hi
I'm experiencing problems when making a new action in PS, it seem that PS only record if I chose an layer but not the adjustment. Been trying to correct existing layers and making new ones in a action - but no difference.
Any one having this problem too...?
Have a lot of packshots that need the same correction and usually these kind of actions takes me 1 min to do - but now I can't make it work...

I am having the exact same problem. Other adjustment layers when changed record a "set current layer" but loading a preset or making a change on the curve is not being recorded at all. Tried deleting my prefs and that didn't solve anything. Would love an answer to this!

Similar Messages

  • Actions don't record data when something other than points are used for Stroke

    This is more of a bug, so if there's any staff out there, just came across this one. I was just recording an action with a vector stroke width set to .25", and it seems it doesn't record the width, although it WILL hit the nail on the head, so the data is there somewhere. To the alrternative when I did this without entering a unit of measurement after it, it immediately filled it in with points. See image below.

    Hi,
    So you are getting expected output when you play the action back? The bug is that the unit value isn't showing in the action steps?
    regards,
    steve

  • I'm trying to open an Amino Acid Titration demonstration in Java so I can record the titration curve and the site crashes, do I need to re-update Java?

    I have the newest Firefox and presumably the newest Java update. Firefox in the extensions menu, told me that it was known to have issues so it disabled it......
    Since I need this curve, I re-enabled it, and now I can't access the page without it crashing.
    Any help on getting Java back up and running?

    Java != Javascript

  • How do I select Target shadow color in curves and levels

    On a tutorial I see that by double clicking on the shadow eyedropper in the curves dialog, I should get to the "Select target shadow color" dialog box.  However, I only get a color dialog box.
    Any clues as to how I can change dialog boxes??

    Thanks for your reply, but it is not exactly what I am asking for.  When I double click one of the three eyedroppers in the curves dialog, I get the dialog box shown in Screen shot 1:
    However, on the instructional video, and actually also on my laptop running on XP (not XP64), one gets the dialog box in screen shot 2:
    My question is can I get this on my PC running XP64?  Have I just inadvertedly changed some setting that needs to be reset??  I really appreciate your help!

  • Simple voice recorder/save for curve 8320?

    Can anyone recommend a simple voice recorder for the curve 8320 where I can record voice notes and save them directly to my phone instead of emailing/mms'n them using the built in send voice note feature on the phone?  I have tried using handango and their software sucks, stuff doesn't work and I tried the vr+ voice recorder program they have and don't like it, I just want something simple.
    Does it exist?

    soon, a Handheld OS version 4.5 will be available for your carrier (if you're at AT&T it already is). Inside it there will be a video mode : you'll be able to take pictures like today, and also 3GP videos.
    If you want, you can install it from AT&T and delete the vendor.xml file on your PC before launching the Desktop Manager to upload the OS on your Blackberry.
    Apart from that, I can't install applications on my Blackberry so I lag a bit about available wonders other people can install on their Curve.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Hi my Snapz pro X and WireaTap Studio  don't record sound in OS Yosemite

    Hi my Snapz pro X and WireaTap Studio  don't record sound in OS Yosemite.
    Why?
    What shall I do to fix it?
    Best regards
    Lars B.
    <Re-Titled And Email Edited By Host>

    http://www.ambrosiasw.com/support/
    QuickTime Player 10.4 can record your screen.

  • Had a hard time all of sudden opening photos in PS via Bridge. Updated all my software and now halfway through editing a photo, my actions don't work properly. Should I remove all programs and re-install?

    Had a hard time all of sudden opening photos in PS via Bridge. Updated all my software and now halfway through editing a photo, my actions don't work properly. Should I remove all programs and re-install?

    <moved from Adobe Creative Cloud to Photoshop General Discussion>

  • FS7 don't record and playback anymore

    Hi there,  my FS7 "died" on job. at first in starts flickering, then it completely refuse to record.i tried everything, all reset, new firmware, reinstall firmware, an all-file from a working FS7, EVERYTHING. but nothing helped... after pushing "start record" nothing happens... no message, nothing... if i turn on the camera, it's booting, every seems normal, but if i press a record button, nothing happens... same for the thumbnail button, it don't came up with the recorded footage. only one trick let my camera recording: when i push and hold a record-button and turn the camera ON, it starts recording during booting (at first the tally is blinking, thats it is stable an recording)... when I STOP recording, and press again start -> nothing happens... but turning on the camera with holding down the record button works... 
    any ideas?
    i contact the prime support, they will have a look, but i just want to ask you guys before sending the camera to sony and be 2 ore more weeks without a camera.  thx in advancedennis

    Maybe a long shot.... but is the "Hold" switch on the side of the camera on?  (don't think there's any menu setting about playback... but there is certainly a menu setting to disable the record button(s) using this switch.

  • I was lost my pad ios7.1 find my phone was activated lost mode enabled i recieved e mail when this action done also sound play was done also i recieved picture from i cloud on my i phone the problem is that i didnot recieve the place althought the icon no

    i was lost my pad ios7.1 find my phone was activated lost mode enabled
    i recieved e mail when this action done also sound play was done
    also i recieved picture from i cloud on my i phone
    the problem is that i didnot recieve the place althought the icon notify me when found was turned on ????

    Ahmed elsaed abdelgalil wrote:
    also i recieved picture from i cloud on my i phone
    If you received a photo stream photo on your phone, save it to your camera roll, then locate the photo in the Photos section of the Photos app, tap the location listed above the photo in Moments and it should show you where it was taken on a map (assuming location services was enabled for the camera on your phone).

  • Help reg: Removing sel records in af:table and to prevent it from Commit

    I have a af:table in a page with some records.The table is editable and the records in the table are fetched from the DB. Now, I edit some of the records in the table.
    I would now like to delete one of the edited records.
    The delete action listener method should remove the record from the table and when I click save on the page (to save the other edited records), the removed record should not get committed to the database.At the same time, the removed record (from the table) should not get deleted from the database either.
    Can someone suggest on how can i achieve this?
    I use a delete action listener method to remove the record from the table in the UI but not sure how to prevent the removed record from getting committed (since its been modified).
    Thanks
    Sreekanth Vijay

    If you remove a row with the delete method, the row will be deleted from the db if you don't change the eo behavior.
    You can, as mentioned in the last post, use the remove from collection to remove three row from the current repeat without removing it from the db. To get three row back you have to execute the query again.
    Timo

  • I have an iMac. , mid 2007.  Frequently, when I take an action, the little color wheel starts spinning and goes on for quite awhile.  Save a file, close a file, open a file, open a window, it's all random.  Somtimes it stalls, sometimes it doesn't.  Why?

    I have an iMac. , mid 2007.  Frequently, when I take an action, the little color wheel starts spinning and goes on for quite awhile.  Save a file, close a file, open a file, open a window, it's all random.  Somtimes it stalls, sometimes it doesn't.  Sometimes long, sometims short.  Why is this happening?

    Consider adding more memory. Be sure you have adequate free space on the hard drive - 15 GBs or 10% of the drive's capacity, whichever is greater. Do not run too many applications concurrently. Visit The XLab FAQs and read the FAQ on resolving the SBBOD.
    Do some maintenance:
    Repair the Hard Drive and Permissions
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior.  Versions 1.5.1 and later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.

  • No Great Solution for Record Multi-Voice Tracks and Edit for Mac? :(

    Let me see if I've finally got this right.
    I've got FinalCut Studio Pro which comes with SoundTrack Pro.
    I've got Logic Express.
    SoundTrack Pro cannot record from different channels from my Mixer, but it can edit pretty well and apply effects, such as Normalization, Silences and whatnot.
    Logic can record from different channels from my mixer but has no editing capabilities, except Garage-band-like and even there, GB seems to offer more. That is there's no normalization or other things.
    Okay, I accept that. But what I don't get is that in order to do something as simple as Record a podcast that has a Host on mic and 1 or 2 Skype callers coming into a Mixer (Mackie Onyx) and that mixer is routed to the Mac. In order to record each person on a different track, I have to:
    Load Logic and record the tracks individually.
    Export the Tracks as individual audio files.
    Import them into SoundTrack Pro and edit them there.
    Export them from SoundTrack to disk.
    re-Import them into Logic (or Garage Band) and export them ("mixdown") as MP3 (SoundTrack won't export as MP3).
    Wow, that's very unexpected.
    If I'm missing something, please let me know. This seems like a lot of "make fit" just to emulate what can be done in Adobe Audition on the PC. (Sadly, Audition doesn't run on Mac.)

    I suppose my question is more along the lines of what solution (I've purchased them all) allows you to Record and Edit multiple spoken tracks of audio?
    I've purchased:
    SoundTrack Pro
    SoundBooth
    Logic Express
    Audacity
    and of course I've upgraded to iLife 09.
    If one of these tools could allow you to select a section of audio from 1, 2, 3, or all tracks and delete it with a "Ripple Delete" option, then I'd be a happy guy.
    Right now:
    GarageBand doesn't allow you to delete and shift-left "ripple delete".
    As for Logic, I don't see ripple delete either.
    SoundTrack does do this but it only allow me to edit one Track at a time--open them all, but edit one, then the other, then the other. Lots of flipping around.
    With Audition (which is limited to Windows) I can select a section of 1, 2, 3, or all tracks, and delete that section, ripple or not.
    FYI: "Ripple" is a Final Cut Pro term.
    To be honest, no that I think about it... FinalCut Pro may be the best solution. Load everythign into it as separate tracks and have at it--at least it does it.
    Remember, I'm not a musician, nor do I record music, only audio for podcasting. (but don't equate "podcasting" to Video-podcasting as most people do).
    Anyway, my solution will be to load Virtual Box on the Mac. Record using Logic (which did a great job of recording onto multiple tracks) and then bring those AIF files into Adobe Audition under Windows in VirtualBox--or perhaps on a Networked PC.
    Of course the other solution (and perhaps less painful) would be to simply abandon the Mac entirely and move all this stuff onto the PC and only use the Mac for FinalCut Pro work. What a huge disappointment that would be.

  • Parents need an ipad2/3 holder like otter box which any tripod can be screwed into in order to video childrens events. It must have gear type adjustments for verticle and horitontal ajustments due to weight of ipad

    Parents need an ipad2/3 holder like otter box which any tripod can be screwed into in order to video children's events. It must have gear type adjustments for vertical and horizontal adjustments due to weight of ipad

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Curves and Elements 4.0

    So I broke down and purchased the Curves tool from the Lynch web site. It it pretty interesting, but what became obvious pretty quick, is I have NO idea how to be effective in using them.
    I can play and see how it lightens and brightens etc... but it is pretty unpredictable ... I feel like a little kid with a machine gun in hand and when I pull the trigger, there is so much "kick" I just spray everywhere but where intended.
    Any tutorials or books you have used that you recommend?
    Thanks

    Barbara,
    The curves tool is $29.99 ( http://aps8.com/powercurves4.html ). Not terribly cheap, but not a bundle either. I guess it is valuable to point out that it is less expensive to get my book from Amazon ( http://aps8.com/hppe4.html ). The Curves product is by HumanSoftware, and they provide some documentation and support. The curves part of the interface works in a way that is very similar to standard curves. There are just a lot more options (such as being able to compare up to 9 different applications on a single preview), and perhaps that clutters the interface.
    My previous books (elements 2 and 3) go through how to apply curves for correction and balancing. I didn't include that in the Elements 4 book because I didn't include a curves tool--I include curve presets. The presets I include (26 of them) cover most of what curves are useful for. I also include a solution using Gradient maps that is a fine substitute for curves, and can produce the same results. Better, it is part of the regular interface and is completely editable. In other words, you don't really need the curves...but people kept asking for them, so I found someone who could provide them -- for not a ridiculous lot of $$ (some packages cost a LOT).
    Sorry if anyone is having trouble. If you have specific questions, I can give you answers.

  • Does anyone know if Apple has any plans to create an electronic medical records (EMR) program? And if not, who do I email to suggest just that as a new market in desperate need of some new innovation?

    Does anyone know if Apple has any plans to create an electronic medical records (EMR) program? And if not, who do I email to suggest just that as a new market in desperate need of some new innovation?

    There already are some tools in the App Store (eg. My Medical - https://itunes.apple.com/us/app/my-medical/id347860026?mt=8).
    If you mean something that would interact directly with a Hospitals main system or such, I don't know of any.  There are numerous companies now selling and setting up central records systems around the country, but I don't know of any that are working on companion patient tools yet.
    Some charity and non-profit companies, like MedicAlert Foundation are working on such things and may have mobile apps on their radar, as funds allow them to develop such thing.  MedicAlert already offers an EMIR service online, but no standalone mobile app for it yet (you manage it via their web portal).
    Epocrates (owned by Athena Health) might also have something in the works, or at least an interest in such a thing.

Maybe you are looking for