My actual delivery address should be in China, not in HK under W275060457, so i need to update our correct delivery add as below No 21 Jing'er Road, Beiyuan, Yiwu, Zhejiang, China Post Code: 322000 Receiver: Li Houde Mob: 008615825771078
My actual delivery address should be in China, not in HK under W275060457, so i need to update our correct delivery add as below No 21 Jing'er Road, Beiyuan, Yiwu, Zhejiang, China Post Code: 322000 Receiver: Li Houde Mob: 008615825771078
This is an iPad user to user forum, so you are not addressing Apple.
You'll have to contact whomever you purchased the iPad.
Cheers, Tom
Similar Messages
-
I had itunes years ago but the email address associated with this is not longer in use. Is there anyway to updating and transferring all music and data to a new email address?
Hello Graceevelyn23,
Thanks for the question, and welcome to Apple Support Communities. You can update the primary email address that is used for your Apple ID:
Apple ID: Changing the email address you use for your Apple ID
http://support.apple.com/kb/HT5621
Thanks,
Matt M. -
Delivery address at Item Level and not at the Header Level
Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKSIt is standard process only.
In Po delivery address is maintained at item level because to which address perticular material to be delivered,
this may change from material to material or may not change -
Delivery address at Item level and not at Header level in PO
Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated,
Regards,
RKSThis may be an old note, but it may point you in the right direction: Note 450425 - Delivery Address creates individual R/3 address number.
If you debug the function module in SRM that creates the PO in ECC, you can check if this is the case.
Regards,
Robin -
Delivery address of PO is not geting disp in print o/p when it is changed
Hello,
When delivery address is changed at PO line item it is not getting displayed in print output.
Before change it is getting displayed.
Note - system is 4.6C.
Thanks - aadilHi,
Why you want delivery address should change once you change storage location in your purchase order?
Universally purchase order considered as committed document by business which provides to vendor with defined delivery conditions such as price, delivery date and delivery condition etc.
Now you need to check/understand – how delivery address designed for your purchase order layout where some times delivery address hard coded in your PO Smartform( refer NACE t.code wwith EF application and find your purchase order ouput type assigned to Smartform ) or delivery address picks from plant address which is available in t.code:OX10
Regards,
Biju K -
Different delivery address in multiple line items of SC
Hi All,
Requirement: If we have different delivery address in multiple line items of SC, the first line item delivery address should be replaced by other line items.
I would like to know the relation between first line item in the shopping cart and its correspnding delivery address?
I have compared the guid of first line item (BBP_PD) and guid of shipping address (second guid not partner guid) which were not same.
Any alternatives we have.
Thanks and Regards,
/NHi Naveen,
I guess you would like to change the delivery adress in the BBP_DOC_CHANGE_BADI.
Here you can identify the delivery adress (partner function 00000027) line item by the field P_GUID. This P_GUID in the partner table (ET_PARTNER-P_GUID) consists the GUID of the SC line item (ET_ITEM-GUID).
When you know the line item GUID, you can find the SC line item number in the item table (ET_ITEM-NUMBER_INT) and you can see which is the first, second... line item of the SC.
Regards,
Peter -
Want to copy Delivery address of one line item in shopping cart to all item
Hi Experts,
We are upgrading from SRM 5.0 to SRM 7.0,In SC Creation We want to copy Delivery address of one line item in shopping cart to all line items in Shopping cart by clicking Change All Items button.This is custom button we added this button and we had written code to achieve the functionality but it is not working.This is same like Change All Items button in Account Assigment for copy accont details of one line item to all other line items in SC.
Web Dynpro Component:/SAPSRM/WDC_UI_DO_SHIPTO
Web Dynpro View:V_DODC_SHIPTO
Thanks,
Aarthi.Hi Prasad,
Our customer needs that button,they want whenever they are clicking the button delivery address should copy to all line items.
In my action ONCHANGE_ALL_ITEMS i called this method
wd_this->mo_dodm_shipto->zchange_all_items( ).
zchange_all_items( ) is implemented in class /SAPSRM/CL_CH_WD_DODM_SHIPTO.
the code i wrote inside zchange_all_items( )
*Error
DATA: LX_PDO_ABORT TYPE REF TO /SAPSRM/CX_PDO_ABORT, " Class for Fatal error caught by PDO Layer
LX_PDO_ERROR TYPE REF TO /SAPSRM/CX_PDO_ERROR. " Class for PDO General Exception
Object Instances
DATA: LO_MSG_CONSUMER TYPE REF TO /SAPSRM/IF_PDO_MSG_CONSUMER,
LO_PDO_SHIPTO TYPE REF TO /SAPSRM/IF_PDO_DO_PARTNER.
Context-Data
DATA: lte_cll_shipto TYPE /sapsrm/if_ch_wd_set_facade=>gt_guid_element,
loe_cll_shipto TYPE REF TO /sapsrm/if_ch_wd_set_element.
Field Symbols
FIELD-SYMBOLS <lse_cll_shipto> LIKE LINE OF lte_cll_shipto.
DATA : lo_pdo_acc TYPE REF TO /sapsrm/if_pdo_do_acct_assgmnt.
DATA : ls_shipto_cll type /SAPSRM/S_CLL_SHIPTO,
lt_pdo_partnerdetails TYPE bbp_pdt_partner,
ls_pdo_partnerdetails TYPE bbp_pds_partner,
LV_GUID TYPE BBP_GUID,
lv_item_guid type bbp_guid,
lv_filled TYPE wdy_boolean.
*exceptions
DATA : LX_ABORT TYPE REF TO /SAPSRM/CX_PDO_ABORT.
*Constants
CONSTANTS : LC_OBJECT_ID TYPE CRMT_SUBOBJECT_CATEGORY_DB VALUE 'BUS2121001',
LC_ADDR_ORIGIN TYPE /SAPSRM/S_CLL_SHIPTO-ADDR_ORIGIN VALUE 'B'.
IF LV_FILLED = ABAP_TRUE.
Downcasting to shipto
LO_PDO_SHIPTO ?= MO_PDO.
insert the clipboard into facade and update and submit update
me->/sapsrm/if_cll_do_mapper~insert_from_clipboard( io_set_facade = mon_cll_set_facade ).
Add new Accounting entries.
lte_cll_shipto = mon_cll_set_facade->get_data_elements( ). "get all elements from the context
LOOP AT lte_cll_shipto ASSIGNING <lse_cll_shipto>.
loe_cll_shipto = <lse_cll_shipto>-set_element.
loe_cll_shipto->get_static_attributes( IMPORTING rv_attributes = ls_shipto_cll ).
Map ui-structure to pdo-structure
MOVE-CORRESPONDING ls_shipto_cll TO ls_pdo_partnerdetails.
IF LS_SHIPTO_CLL-PARTNER_FCT = mv_part_func.
LS_PDO_PARTNERDETAILS-PARTNER_FCT = ''.
ELSE.
LS_PDO_PARTNERDETAILS-PARTNER_FCT = LS_SHIPTO_CLL-PARTNER_FCT.
ENDIF.
IF ls_pdo_partnerdetails-del_ind NE 'X'.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_16 = ls_pdo_partnerdetails-p_guid.
mv_acc_guid_split = ls_pdo_shipto-guid .
IF mo_scope = 1.
ls_pdo_partnerdetails-p_guid = mon_cll_set_facade->get_bo_guid( ).
ELSE.
ls_pdo_partnerdetails-p_guid = mo_parent_bo_mapper->items_get_lead_selection( ).
ENDIF.
APPEND ls_pdo_partnerdetails TO lt_pdo_partnerdetails.
ENDIF.
CLEAR : ls_pdo_partnerdetails, ls_shipto_cll.
ENDLOOP.
Add New items to PDO
IF NOT lt_pdo_partnerdetails[] IS INITIAL.
TRY.
LO_PDO_SHIPTO->update_item_partners( EXPORTING it_partner = lt_pdo_partnerdetails
iv_item_guid = lv_item_guid
CHANGING co_message_handler = mo_pdo_message_consumer ).
CATCH /sapsrm/cx_pdo_abort INTO lx_pdo_abort.
mo_cll_message_handler->set_abort( io_pdo_abort_exception = lx_pdo_abort ).
CATCH /sapsrm/cx_pdo_error INTO lx_pdo_error.
mo_cll_message_handler->add_exception( io_pdo_error_exception = lx_pdo_error ).
ENDTRY.
Update PDO with the changed data.
TRY.
mo_pdo->submit_update( ).
CATCH /sapsrm/cx_pdo_abort INTO lx_pdo_abort.
mo_cll_message_handler->set_abort( io_pdo_abort_exception = lx_pdo_abort ).
CATCH /sapsrm/cx_pdo_error INTO lx_pdo_error.
mo_cll_message_handler->add_exception( io_pdo_error_exception = lx_pdo_error ).
ENDTRY.
Fire refresh of DO Mappers registered for refresh since the item table has acc related data.
mo_parent_bo_mapper->fire_event_refresh( iv_perform_updates = abap_false ).
ENDIF.
ENDIF.
Thanks,
Aarthi. -
Hi,
we have a third party scenario.
The PO is created with reference to Sales Order. Delivery address is coming from Customer adress.No problem.
Now when I alter the PO by adding a line item, then PO is printing plant address as delivery address not the customer's address.
I want the customer address should be given priority over Plant address.
any suggestions
Thanks
SreenuHi,
Generally delivery address is the plant address for all material procurement where delivery address is hard coded or take from address which there in plant in the PO print which you can find in the PDF/Smartform (with a logic) linked with PO output type(ZNEU).
For your case, as PO created WRT sales order, you should have separate PO document type, separate PO output type ( message type YNEU) and link PO output type YNEU to new PDF/Smartform with logic that it should pick delivery address what is there in the field u201CCustomeru201D in Delivery Address TAB in the PO{ not from plant).Just discuss with ABAPer for development of new PDF/Smartform for third party order
Regards,
Biju K -
Delivery Address coming as a default in the home screen for creating a SHC
Dear Experts
I have done some changes in the delivery address and while saving it was asking to maintain as a default address otherwise it was not able to save the changes I made.So I maintained it as a default and saved the changes.
Now the issue is when we are in the home screen for creating a SHC this delivery address is coming as default.As we dont want this dekivery address to be default on the screen and the requirement is that user should be able to search the delivery address.
So we dont want that defaulted address.The other reasons were also checked and no where in the attributes we ahave maintained this default delivery adress.
Can you please help us how can we remove this defaulted delivery addres in the SHC creation screen.
Thanks and Regards
VikasHI Muthu
Thanks for the reply.
I again repeat I think you have not understood my question.These are very basic things you are mentioning about how to change the delivery address.i know all about this and in my query I have clearly asked that during the change option its asking to maintain the default delivery address and even if I dont select it my changes wont be saved.Second is even if I maintain another delivery address only then from the first delivery address the default screen will be unticked.
Because the issue here is that what ever the delivery address is maintained its defaulting in the shop screen for the creation of the SHC.
So my reequirement is how to set this.I have checked attributes and nowhere this delivery address has been maintained.
Brief about Issue:
We have done some changes in the delivery address (Transaction Edit
internal addresses in the URL screen)and during the save it was asking
us to maintain it as a default address without which it was not able to
save.So after saving on the creation of the shopping cart screen this
delivery address is coming as a default value.
We dont want this to be defaulted and the user should have the search
functionality for the delivery address.This problem is happening for
the org id for which I have done the changes.When i assign my user id
to the other org id the defaulted delivery address is not shown on the
shopping cart creation home screen.
We have checked in the attributes of the user and the org id and
nowhere this delivery address has been maintained.
I have checked the settings for the other org id for which it was not
showing as defaulted on the shopping cart creation screen and compared
these two and was not able to find any difference.Could you plase let
us know the problem in this case.
Regards
Vikas -
Shopping cart delivery address not transferred to ECC PR
Hi Forum,
We recently upgraded from SRM 701 to 713 and to ECC EHP6. After upgrade the SC Delivery address is not getting transferred to back end PR instead the PR shows Plant address as delivery address. As per this wiki article
Shopping Cart Delivery Address transfer from SRM to ECC - Supplier Relationship Management - SCN Wiki
the standard behavior is that SRM Delivery address should be transferred to PR but to our OSS SAP replied that standard behavior is opposite i.e.
PR Takes Plant address as delivery address as default.
Response from SAP:
Please see that the standard fields of EMLIF and LBLKZ are not
available in BAPI structures. This is the standard functionality of
BAPI_REQUISITION_CREATE.
If you are using a release newer than Release 4.7 , which I believe
you are , you can use BAPI_PR_CREATE instead. However , this is not
possible using BAPI_REQUISITION_CREATE.
I am sorry that I do not have a better answer for you at this time but
the behavior that you are experiencing is standard SAP system design.
Q1. What is the standard behavior - SC Delivery address is transferred to PR or Plant address is used in PR?
Q2. What are the changes required to transfer SC Delivery address to back end PR?
Thanks,
AnubhavHello Anubhav,
Its unfortunate that SAP has not tested the transfer of Delivery Address from Shopping cart to ECC Requisition.
SRM uses BAPI_REQUISITION_CREATE which is deprecated in the newer releases of ECC. This is why the Delivery address is no longer transferred to ECC.
Check this note:2132886 - BAPI_REQUISITION_CREATE - Delivery address is not updated
Interestingly I found another note in SRM area which asks customers to themselves implement a call to BAPI_PR_CREATE to fix such issues.
Check note:2108097 - Shopping cart transfer to ECC fails when using BAPI_REQUISITION_CREATE
We have an upcoming Go Live with SRM 7.13/ECC 6.17 and I just noticed that Delivery address from Cart is not transferred to ECC Requisition.
I have to rush an urgent change due to this.
I dont know what else data is not being transferred without detailed testing.
Thanks,
Sushil. -
Hi.
For External services PR, the delivery address should be site address.
Also the delivery information is not copying into PR delivery address.
How this can be done ? Is there any config ?My abaper has tried a few IWO1_PREQ_BADI, IW010009 and WORKORDER_UPDATE.
Operationally, user require the work centre address as the delivery address of the services due to the company has 24 physical workshop locations.
Anyway, will also try to create the fields in AUFK table as recommended. -
Hi Gurus
My Interco STO --> Item Detail --> Delivery Tab --> address is buying plant addres instead the shipping plant address.
How to fix this.
Regards
RGHi Vimal
Agree with you as for the normal flow it is working fine.
Now the issue is for the STO Return order.
During the Return order (STO) process, since the reciving plant is still remains the same (Reciving plant), it popluates accordingly in the delivery addess.
Since now the delivery address should be shipping plant address...? or can remains the same...
regards
RG -
Unloading Point Delivery Address (User Exit)
HI Friends,
While creating Customer master itseld i would like to maintain different Unloading Points Like Chennai, Hyderabad, Mumbai, Delhi ( Each unloading Point I would like to maintain Different Delivering Address.)
While Creating the Sales order Unloading point automaticallty will popup at the time if we select Chennai the respective delivery address should be pickedup (Ship to party Level)
Please some one Guide me,
regardsDear udhyakumar
Why dont you consider maintaining different ship to party and assign it in the sale order at item level if each and every line item will have to be delivered to different address.
Alternatively based on ship to party, you can create sale order.
thanks
G. Lakshmipathi -
Delivery address in Third party process.
Dear All,
I have one query in third party process.
Created third part sales order,where PR is generated automatically.Based on PR (purchase requisation) created Purchase order.
When I select item category S-Third party,system will pick the delivery address from the sales order.
But when I change the item category to L-Subcontracting the delivery address is not picking from sales order.It is taking the delivery address of the plant. I need system to pick delivery address from the sales order.
Please let me know if I need to do any customisation for the above process.
Thanks in advance,
Awaiting for your early reply.
BabuHi,
In standrad application it is not possible. however, there is a user exit here, EXIT_SAPLMMDA_001, in which you can implement your own logic to select the address.
Regards,
S Anand -
Tax Jurisdiction code is not replicating from Delivery address tab to Invoi
Hi Gurus,
when i trying to change the value i.e tax jurisdiction code in the delivery address tab that value is not replicating to the Invoice tab in the transaction ME22N.
How to resolve this ???
thanks in advance.Hi,
Make use of this BADI ME_TAX_FROM_ADDRESS in this use method GETTXJCD_
You will get the delivery address number using function modeul MM_DELIVERY_ADDRESS_TXJCD_GET
Regards,
Pravin
Maybe you are looking for
-
Output Device ( convert PDF )
Hello, I want to take a print out of a document/report in the system in PDF form without using abap code or FM. What kind of printer should I add or is it possible to add a normal printer to do this? Best Regards ismail Karayaka
-
Object navigator questions..
1.Can we create user defined triggers?if yes...how? 2.How can we use the search functionality? 3.What is the use of relations in object navigator of forms? 4.What is the use of graphics which is under canvas node in object navigator? 5.Can we use mor
-
I-Phone stopping playing music after one track
I have a i-phone 3G and when I use the i-pod function it will play music fine until the next track and then it will stop and go back to the main i-phone screen. Anyone got any ideas why this is the case?
-
Discover how to apply None, Scale, and Recenter rules when resizing a layout. Also learn the meaning behind "Based on Master." http://adobe.ly/Jo2ssO
-
How to encrypt with a string as input,but not a key object
As far as I know,when encrypt or decrypt ,a key must first be got,and the key is first generate by a tool or from SecurityRandom,that means I can not generate the same key with the same input.Does there is a method which can generate a same with the