My address bar does not autocomplete. Running Windows XP and it was working but not now. How do I start the autocomplete?
My computer crashed and it has been restored. I am running Windows XP and I did not re-install Firefox Aurora after the computer was restored with new motherboard and HDs. All of my software works, but the autocomplete does not. Firefox remembers my username for logging in and my password. It is just the autocomplete. I have to completely type in the website name. When I open the History and Bookmarks window, there are no entries. The yellow star in the address bar also does not work. When I click on it, nothing happens.
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.
Similar Messages
-
am not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate
i am the original owner of the iphone 5s i been using for a month the and the apple id and pass is the correct one
i just restored it and i am entering the same apple id and pass still its giving the error msg . but with the same id and pass iam able to log in to itunes ,icloud -
Lost bookmark tool bar. Links show up in history and in bookmark folder but not on tool bar
I wanted to uninstall/reinstall ff from my macbook pro. It had started acting flaky. So I "exported my bookmarks to html". Well I then looked at the html file and it was there so I though all I would have to do is import html.
So I uninstalled FF using a tool to completely uninstall FF from Mac. I didn't want vestiges of files to be left over.
Then installed FF.
Then I went and did "Import HTML".
But I don't see them on my bookmark bar.
I can see them in my History and they are in a folder called Bookmarks Toolbar.
How do I get it back where it was so I can see it all on my browser window and not have to go to the History->Bookmarks ToolbarMake sure that toolbars like the "Bookmarks Toolbar" are visible.
*"3-bar" Firefox menu button > Customize > Show/Hide Toolbars
*View > Toolbars<br>Tap the Alt key or press F10 to show the Menu Bar
*Right-click empty toolbar area
Open the Customize window and set which toolbar items to display.
*"3-bar" Firefox menu button > Customize
*check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize palette into the Customize window to the Bookmarks Toolbar
*if missing items are in the Customize palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the Customize palette then click the "Restore Defaults" button to restore the default toolbar setup
*https://support.mozilla.org/kb/customize-firefox-controls-buttons-and-toolbars -
I have received window error message "iTunes has stopped working" everytime I plug my classic ipod to the laptop which running window 7. iTunes was working fine with the same ipod, but starts to receive the error msg. after the second plug to update the music files this morning. All the music files were removed from the ipod. Any idea what might cause the problem and how to get it fixed? thanks!
Thanks! i finished to run Check your iPod with Diagnostics Mode. here is results:
Retract:15
Reallocs: 0
Pending Sectors:0
Poweron Hours:556
Start/Stop:5071
Right now, i am runing Check iPod hard-drive for errors and will let you know if it gets ipod fixed or not -
HP LaserJet 2100M was working - but not now
I'm working with a customer with a B/W G3 that was running Mac OS 8.6 connected to a LaserJet 2100M with the HP DirectCard J4135A, which has a USB port. This worked fine. The person took their system to a local Mac shop, where they added a bunch of RAM, upgraded to 9.2.2 and 10.4.9 and then returned system to the customer, where they have had no end of grief due to SCSI scanner that is critical to their work, etc. etc. They looked me up and I've resolved most of their issues, but am having a heck of a time with the printer. When started up in Mac OS 10.4.9, we have no problem printing. When started up in Mac OS 9.2.2 (not Classic) I am unable to create a Desktop Printer. I use the Apple Desktop Printer Utility (vs. 1.31), choose the printer via Apple USB, then choose the correct PPD, then click on create and it acts like it's doing it and the open window takes on the name I give it, but no icon shows up on the desktop and if we try to quite the utility, we still are unable to print to the LaserJet. I've used the same utility to delete any it thinks have been created, I've trashed any printer related prefs I could find in the System Folder/Preferences/etc. but no dice. I've done this a bunch of times with other systems, typically without issue. Originally the printer was connected through a hub, but is now connected directly to a USB port on the G3. And like I say, if we start up in Mac Os 10.4.9, it prints just fine.
Stumped!The issue turned out to be in incomplete install of Mac Os 9.2.2 by a local "Apple Authorized" service provider. I think they installed a Classic support only version of Mac OS 9 and this customer needed a full version of 9 for SCSI support, etc. Once a real OS 9 was installed and updated to 9.2.2, I had no problem with the printer, or the Desktop Printer Utility required to create the desktop printer.
-
I have windows 7 and all has been fine until 2 days ago when suddenly i turned on my laptop and i got some error message about some apple support program error - i didnt tkae notice of it only that i couldnt run itunes, so i uninstalled and reinstalled itunes and it now runs as normal, but now it wont recognise my ipad saying that 64bit version is not installed - WHAT RUBBISH IS THIS? i downloaded and installed the 64bit version from applie and yet the error persists - can some one please tell me how i can get itunes to recognise my ipad again - this seems like such a ridiculous error for these two apple products to be conflicting with each other - please help
well i have found that i needed to not just uninstall itunes, but also apple mobile device support, bonjour apple software update and apple application support - uninstall all these and then install itunes - that seesm to have fixed it, though now i am sync fail - that's a different matter perhaps
-
Compiz was working but not anymore :( RADEON X1600
hi...im an arch novice. I just switched from ubuntu over the weekend and im trying to get compiz fusion to work correctly with my Radeon X1600 graphics card. I installed latest ati-dri package using pacman and i eventually got compiz running with the following command...
LIBGL_ALWAYS_INDIRECT=1 INTEL_BATCH=1 compiz --replace --indirect-rendering --sm-disable ccp &
but I suspected that my system wasn't taking full advantage of my card so i tried to install the catalyst driver and catalyst-utls from the AUR. (not knowing that they didnt support my card)
so i removed the catalyst packages and reinstalled ati-dri and libgl
now when i execute the command posted above i get a white screen.
and when i execute
compiz --replace &
i get a white screen.
any ideas?
here is my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "dri2"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV530 [Radeon X1600]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionok i rebooted and ran
pacman -S xf86-video-ati libgl ati-dri
and then i re-configured Xorg
now when i try
LIBGL_ALWAYS_INDIRECT=1 INTEL_BATCH=1 compiz --replace --indirect-rendering --sm-disable ccp &
i get the white screen and when i try
compiz --replace
i get the following output:
compiz (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
@Acecero: i realize that. but im on a old computer and i don't want to go out and buy a new graphics card.
Last edited by murfMan (2009-10-27 03:30:58) -
I loose my windows xp. Install a new Hard drive with windows 7 and a new Firefox. I have acess to old HD data. Where can I get the Firefox profile with old bookmarks?
See the following article: [[Back up and restore information in Firefox profiles|Back up and restore information in Firefox profiles]]
-
My internet connection is good, so why is Firefox not responding?
This problem can be caused by pages that use Flash media. Here is some standard guidance that addresses the most common reasons for Flash problems in Firefox. I'm sure you've seen some of it before, but just in case:
(1) If you have installed any recorders/downloaders that interact with Flash media, make sure they are as up-to-date as possible, or disable them.
(2) Disable hardware graphics acceleration in Firefox and in Flash
(A) In Firefox, un-check the box here and restart:
orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable protected mode
See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?] -
Hello.
Looking for help on how to get a better signal when receiving and placing calls. Phone got a little wet and is having hard time placing calls and receiving call. Calls are breaking up most of the time but some times I have 4 bars and phone calls goes through just fine. Noticed phone is having troubling connecting to towers. Get a call but caller can not hear me when I have only one bar showing on phone. Phone does hit 4 bars sometime and phone call is clear. Any suggestion., new phone still learning how to use. Should I try to reset to factory settings??? Have read lot of negative comments on the web about doing this. Trying all options before going to the Apple store.
Thanks for any help or advice.I ended up getting a new phone, straight through Apple. I called their technical support and went through all he basics again and they decided to replace it. Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours), I called them back to inform that there was no change, so they set up the order.
I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway). Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent. I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something. Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month. -
Hi I have had this problem before butr cant remember how to fix it . What has happened is certain apps have no sound where as others do I also have no sound when typing.I remember when i last asked for help with this problem it was done through settings. It not on mute Please help me.
You can enable keyboard sounds via Settings > General > Sounds . If they are enabled but you can't hear them then have you checked that you haven't got notifications muted (which will also affect most apps) ?
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
This used to work on my Mac using Firefox and Mac Mail but now it doesn't. Opening regular links are unaffected. I can still click and open easily. This only happens when I try to use the feature, to open links behind mail. When I right click nothing happens. Nothing is opened.
Hi GetPaulHoward,
Thank you for posting your question to the SUMO support forum, however I am not sure this pretains to Mozilla. There is a help forum you can contact at Apple.
[https://discussions.apple.com/message/23817335#23817335]
Hope this helps. -
I have done RESET network setting, reset the IPOD with no data lost and all- still not able to connect
All other devices at my room are connecting and everything is fine.
can you please help me out in resolving the issue?
Ashwin.If this did not help:
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Last, restore the iPod, first from backup and if problem persists, restore to factory settings/new iPod -
My bluetooth seem to conflict with my wi fi. Both work with the other turned off.
In an area where your WiFi is not working, try System Preferences > Network > Assist Me > Diagnostics
-
Please help I'm super confused how this happened :(
See "Change your iTunes Store country" > http://support.apple.com/kb/HT1311
Maybe you are looking for
-
Can a Family Share organizer also be a member of another's Family Share?
IIf I set up Family Share and add members, can a member also set up Family Share and add me as a member? In other words rather than billing to me for all member purchases and downloads, can their purchases be billed to their acct but share with me?
-
How can i modify my directoriy names and package alltogether once for all?
thanks !
-
Referencing Form Values WITHOUT submitting
Hi Guys, How do you reference a Form value in a JSP page WITHOUT submitting the Form and then use the form value to set a c:param ? <input type="button" name="btnPassword" value="Password?" onClick=" <c:url var="emailMyPwdUrl" value="secu
-
I can't find a recent answer to this. I just upgraded to the latest v. 4.5 through my desktop software. But isn't version 5.0 the latest? Doesn't it work on the 8330? Thanks. JJM
-
How to connect via bluetooth with wireless printer
how to connect my macbook pro via bluetooth with epson all in one wireless TX600FW