My Adress book database gets bigger and bigger !!!

Hi,
I love using iSync with iCal and Address book. I just want to ask a question.
The more I Sync my Address book, the more it grows in kind of a cycle of sizes : 225k, 450k, 900k, 1m, 1,2m, and comes back to 225k for instance and goes globally bigger a few syncs later (250k, 500k, 800, 1m, 1,3m for instance).
It is really simple to observe when I do backup files (it does the same with iCal but in a lighter way).
It seems normal that a database gets bigger and bigger with new entries, but in this case, it seems independant (in fact the synchronization itself - even with no data's - seems to increases the size).
My question : do you know a way to blobally reduce the size of the database ?
Thank you very much.
PS : forgive my clumsy English (I am French)
Message was edited by: Michel Goldberg

Oups ?
Nobody to answer ?
Thanks.

Similar Messages

  • My Mac Book air gets slower and slower. Is there any software or application to increase perfromance ?

    My Mac Book air gets slower and slower. Is there any software or application to increase perfromance ?

    jean-michel from France wrote:
    My Mac Book air gets slower and slower. Is there any software or application to increase perfromance ?
    Try this program to clean and optimize your Mac:
    http://www.macupdate.com/app/mac/11582/onyx
    It works for me! Air i7.

  • Mac book pro getting slower and slower

    My 3 tear old mac book pro is getting slower, and slower and slower?

    How large is your HD and how much space do you have left?
    Check out the following & do the necessary: 
    User Tip:  Why is my computer slow?
    What to do when your computer is too slow
    Speeding up your Mac

  • I am purchasing a new i phone 4-s can i sync it to the cloud as my power book is getting ol and i want to sync this phone to my newer imac

    How can i sync a new iphone to the cloud instead of my older power book? I wnat to sync the newer phone to my i-mac that is newer.

    Only iTunes content and any photos transferred from the computer that was used for syncing the iPhone.
    Transfer your iTunes library from your computer's backup which should include other important data such as documents and photos, etc.

  • My mac book pro getting heated and starting up is very slow please me

    MY config....please help me out
    its heating too much

    The temperatures that you iStat pro shows are not out of line for video and games.  When internal temperature start approaching and exceeding 100c, then there becomes cause for concern.  Never the less, run an Apple Hardware test:
    http://support.apple.com/kb/ht1509
    (you may have to press OPTION D keys to start it)
    Regarding the slow boot time, start with these two user tip articles:
    https://discussions.apple.com/docs/DOC-3521
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • Can't transfer my adress book from 10.3.9 to 10.4.5 version

    been trying to use some of the answers here but it just doesn't work. I change to a new macBookPro and saved my adress book (3.6MB), InBox and just can't transfer to the new computer (sistem).
    The transfer is made, but nothing showsup?
    and now I can't send our messages, except for some ?!
    I tryed to make a new folder on my desktop and place the mbox on it and rename the folder with the termination .mbox and import the new file, but again nothing happend ...
    Thers alot of info. here and I just can't let it go away ...
    Hope I can have some help ... thanks!

    Doug:
    Your computer meets the minimum system requirements for Tiger. However, the major Operating Systems: Jaguar, Panther, Tiger, Leopard must be installed from an install disk, which, as Niel indicated, needs to be purchased. Updates within an OS, from 10.4.4 to 10.4.11 for example, can be installed either via Software Update or downloaded as stand-alone updates form the Apple website and then installed.
    If you do not already own the Tiger install disk, you might consider Leopard instead, since your computer meets the technical specifications for Leopard, and the cost of Tiger and Leopard are essentially the same $129 from Apple.
    I would suggest that you seriously consider upgrading your RAM. Although the RAM you have will run Tiger, it will run much better by boosting your RAM by installing at least one 1 GB module. Your compuuter will support 2 - 184-pin PC-3200 (400MHz) DDR SDRAM up to 1 GB each. You can upgrade them both or upgrade to 1.5 GB for now.
    Please do not hesitate to post back should you have further questions.
    Good luck.
    cornelius

  • Background Script if database get disconnect Re open an application

    Dear Sir,
    we prepare a shell script to Re open an application if database get disconnect,
    and the details as showing below:
    *#  -1-to check if we are not connecting to Database Re-open*
    tnsping80 tnsname > c:\test.txt
    FOR /F "skip=6" %%A IN (C:\test.txt) DO IF %%A NEQ OK GOTO reset
    del c:\test.txt
    *#  -2- to check if there is any job waiting on database Re-open*
    sqlplus -s username/password@tnsname @jobWaiting.sql
    FOR /F "skip=3" %%A IN (C:\test.txt) DO IF %%A EQU 1 GOTO reset
    del C:\test.txt
    My problem is when the database get disconnecting after calling statement-1-, statement -2- failed and the background process stop working,
    so how i can catch the error when I'm calling sqlplus -s username/password@tnsname.
    Regards,

    First try to sqlplus -l option to ask sqlplus to exit after first connection failure otherwise sqlplus retries to connect and prompts for new connect string:
    >
    -L[OGON]
    Specifies not to reprompt for username or password if the initial connection does not succeed. This can be useful in operating system scripts that must either succeed or fail and you don't want to be reprompted for connection details if the database server is not running.
    >
    Then on Windows use %errorlevel% to check sqlplus return code. If sqlplus connection fails, errorlevel should be set to a non zero value.

  • I have a new I phone 5c and every few days the screen icons get bigger , almost like the don't fit the screen anymore. I have to shut phone down , why is this

    I have a new I phone 5c and every few days the screen icons get bigger , almost like the don't fit the screen anymore. I have to shut phone down , why is this

    probably your zoom is on. try double tapping with three fingers on your screen, it should go back to normal and then goto
    settings>general>accesibility>zoom and disable it

  • HT204150 I have a Mac 10.5.8 op system.  My Contacts do not syn with I cloud.  Trying to get my address book complete on both systems and now I have lots of duplicates on I cloud adress book.  How do I efficiently merge the duplictes that are now on I clo

    I have a Mac 10.5.8 op system.  My Contacts do not syn with I cloud.  Trying to get my address book complete on both systems and now I have lots of duplicates on I cloud adress book.  How do I efficiently merge the duplictes that are now on I cloud?

    You cannot use iCloud with Leopard 10.5.8. The minimum requirement is Lion 10.7.2. If you have been syncing your contacts with iCloud you can only have been doing it by some sort of unsupported hack, and if it doesn't work it's unlikely to be possible to find an explanation. If you have been using other (compliant) devices by trying to sync using both iTunes and iCloud you are likely to get duplicates.
    A computer old enough running Leopard may well not be upgradeable to Lion or Mountain Lion, but if you can do so this is the only way you are going to be able to make proper use of iCloud.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    To purchase it you will have to ring Apple at the number given at the bottom left of this page.
    The requirements for Mountain Lion are listed here:
    http://www.apple.com/osx/specs/
    It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
    You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • How to get bigger album art?? And how to change iTunes 10 font??

    Hiya!!
    I just wanna know is there any chance to get a bigger album art in this window:
    [IMG]http://i55.tinypic.com/2wcjsk9.jpg[/IMG]
    I know that there was a way to get bigger album art in iTunes 9, but after recent iTunes update there's no way to get a bigger album art in this window!!
    And the second question is that how do i change the font in iTunes 10?? In iTunes 9 it was iTunes.ttf and iTunes Bold.ttf, but non of those fonts are not working in iTunes 10.

    santarick wrote:
    The easiest way I have found to get acceptable album art is to go to Amazon music and copy and paste their album art into your Itunes info. Most, but not all, come up with very good quality and right size (large) As far as the font I have no idea.
    I got the impression that the original poster was meaning that that wanted iTunes to display the album artwork at a larger size in the list view, not that the artwork itself needed to be bigger. The iTunes Store already provided 600x600 pixels artwork (Amazon only provides 500x500 pixels) so I don't think that is the problem.
    I am not aware of a way of altering the list view to show the artwork bigger, but one can show the artwork in its own window at full size by turning on the 'show artwork for selected item' in the bottom left of the iTunes window, and then double-clicking on it to open it in its own window. It is also the case the other different views, like coverflow show the artwork at a bigger size than the list view.

  • HT1430 My iPhone display sometimes getting bigger than normal size. So big sometimes  that I can't use it and I must turn it off. Anyone know what happened ?

    My iPhone display sometimes getting bigger than normal size. So big sometimes  that I can't use it and I must turn it off. Anyone know what happened ?

    You most likely have zoom on. Double tap with THREE fingers to turn zoom off, if it is on, then: Settings>General>Accessibility...turn it off for good.

  • When i switch on my macbook its icon first appears smallers then gets bigger and the place where we enter the password.......that page looks like over zoomed. Please help tell what to do????

    when i switch on my macbook its icon first appears smallers then gets bigger and the place where we enter the password.......that page looks like over zoomed. Please help tell what to do????

      Reset PRAM.   http://support.apple.com/kb/PH18761

  • How can I get bigger size letters in ribbon and all setting up interface?

    Hello everyone! This must be simple but I could not get a clue by myself. New macbook air user. How do you get bigger size letters in ribbon and all setting up interface? Everything is just so small!

    Hello and thanks Lousy! Found out web page and docs can be enlarged by trackpad motion control. Other interface can be zoomed+by alt+cmd+8(Spanish keyboard ) thanks for your quick answer. I am dummy new Mac user.

  • Why do my links get bigger and turn red?

    Hi,
    I have a website I created many years ago for my business. Along the way something weird happened to all the links. Whenever someone hovers over them with a mouse, the links turn red and get bigger. Can someone please tell me what caused this and how get fix my links so they're normal again?
    My website address is: http://karathecomputertutor.com
    You can see what happens by hovering over any link in the left navbar.
    Thanks!
    Kara

    Here is how to fix it, but I am not sure of the colors. First thing is to remove th <p> </p> tags from the links. Then change the following corrected lines in your 3col_leftNav.css.
    #sectionLinks a {
    display: block;
    font-size:100%;
    border-top: 1px solid #cccccc;
    padding: 2px 0px 2px 10px;
    #sectionLinks a:hover{
    display: block;
    font-size:100%;
    background-color: #dddddd;
    text-align: left;
    color: #369;
    text-decoration:none;
    Notice that in both the a and a:hover, there is a font size declaration. That way they always stay the same. Also, on the color of the a:hover, it is the same as the original, only the background changes. I am not sure that is what you want. This works on my computer as I have tested it here. Hopefully it will work on yours. This will change all the sectionLinks a and sectionLinks a:hover that uses that style sheet.
    Jim

  • My battery is getting bigger

    My battery on my 2006 MacBook was replaced with the battery recall in 2007(?).
    I just noticed it is growing, getting bigger.
    It should be a bad sign..... will explode, will be fire up....
    Does anyone have experienced a bloating battery problems?

    Hi ksawada and welcome to Apple Discussions!
    It should not catch fire or explode, but as Templeton Peck suggests, you should remove it from your MacBook immediately and replace it.
    Best of luck.

Maybe you are looking for

  • I get error message when I try to load lightroom 5 -unable to laod application correctly (oxooooo7b)

    I get error message when I try to load lightroom 5 -unable to laod application correctly (oxooooo7b) what can I do

  • Computer to Watch TV Confined to Bed

    I'm confined to bed for at least six months. I've got my iBook G4 on the hospital table but it isn't powerful enough to watch most tv shows, i.e. Dancing with the Stars. In the evening Hubby connects the mac to our standard definition tv so we can wa

  • Organizing photos in a sequence

    iPhoto 08. I have Pictures in the Finder and in a folder they are all in perfect order as I want to view them. Ordered as ceremony 1, ceremony 2.....reception 1, reception 2 etc. When I take that folder into iPhoto the order is all messed up. I would

  • Merge Query Taking Long time !!!

    Hi all, Im using loading type update/insert in one of my mappings. mapping usually takes 3-4 mins to complete. Suddenly It has taken 1 Hr to complete. If I take the select query from the mapping, its running fast and completes in 2 mins. I Checked th

  • Bug or what ?

    Hi, I've followed the Tutorial 'Generating a Struts-based JSP Application for an Application Module'( Jdev 9.0.3 Prod Release), where I'm working with only one table. After all files are generated, I run the main.html, and this is what I did : 1). cl